Engineering Commons^™

Normal-Strength And High-Strength Concrete Columns Under Cyclic Axial Load And Biaxial Moment, Mehdi Zarei

Dissertations

The technique of using Carbon Fiber Reinforced Polymer (CFRP) materials to repair and strengthen various concrete members has become popular in the structural retrofitting field as an effective way to enhance the strength and ductility of concrete members due to its superior mechanical properties. In this study a method was introduced to study the behavior of concrete columns with and without CFRP jackets under constant axial load and variable lateral load. The lateral load was applied monotonically and cyclically. To predict the behavior of concrete columns under monotonic and cyclic compressive loadings, a computer code was developed to produce the …

Evaluating A New Cem Iii/A Cement For Concretes Exposed To Harsh Acid Rich Environments, David Thompson, Niall Holmes, John Reddy

Conference papers

The Irish Annex to the European specification, performance, production and conformity of concrete, IS EN 206, recommends CEM III/B cement for acid rich environments containing between 66 to 80% GGBS. However, BS 8500, the UK annex to EN 206 and the British Research Establishment (BRE) Special Digest 1, recommends CEM III/A cement with a GGBS range of 36-65%. This project investigated the performance of a new CEM III/A cement produced by Ecocem Ireland in concretes exposed to such environments using an extensive suite of laboratory tests.

In Ireland, up to €5.8bn will be invested to provide fresh drinking water and …

Pumping Of Fresh Concrete: Insights And Challenges, Geert De Schutter, Dimitri Feys

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Pumping of Fresh Concrete is of Utmost Importance for Concrete Practice. Required Pumping Pressures Are Typically Estimated based on Design Charts. However, with the Increased Use of Chemical Admixtures and the Development of More Flowable Concrete Mixtures, the Accuracy of Traditional Design Charts is Questioned. in Recent Years, Significant Progress Has Been Obtained in Understanding the Flow of the Material in the Pumping Pipe, Including the Behavior of the Lubrication Layer Near the Pipe Surface. in Comparison with Traditional Design Charts, This Results in More Reliable Pressure Predictions When Considering Very Fluid Concrete Types Like Self-Consolidating Concrete. Some Remaining Challenges …

Effect Of Fly Ash Fortification In The Manufacture Process Of Making Concrete Towards Characteristics Of Concrete In Sulfuric Acid Solution, Asep Handaya Saputra, Muhammad Shohibi, Masatoshi Kubouchi

Makara Journal of Technology

Fly ash is a silica or alumino silica material that can be used as a constituent of cement in the concrete manufacturing process. Utilization of fly ash aims to improve durability and minimize the reduction of concrete’s compressive strength exposed to an acidic environment, which can be achieved through the pozzolanic reaction of fly ash with Ca(OH)2 within concrete. The reduced content of Ca(OH)2 through pozzolanic reaction will minimize the tendency of ettringite formation (compounds that cause deterioration and decrease the compressive strength of concrete). In order to determine the relation between fly ash replenishment into concrete with concrete’s characteristics …

Phase I Evaluation Of Selected Concrete Material Models In Ls-Dyna, Bradley J. Winkelbauer

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Numerous roadside safety systems are configured with reinforced concrete materials, such as bridge railings, median barriers, and roadside parapets. These protective barrier systems are intended to safely contain and redirect errant vehicles as well as prevent impacts into hazardous fixed objects or other geometric features. The analysis and design of these structures may involve impact simulation with finite element software, like LS-DYNA, which includes multiple concrete material models. For such investigations, limited guidance is available for selecting preferred concrete material models and determining appropriate values for specific parameters. This Phase I study investigated the viability and performance of existing concrete …

Investigation Into Mechanisms And Mitigation Of Alkali-Silica Reaction In Sustainable Portland Cement Concrete Containing Recycled Glass Materials, Kaveh Afshinnia

All Dissertations

A significant portion of recycled glass from municipal waste streams is not found to be suitable for reuse as cullet in the production of new glass containers, and as a result it is disposed in landfills. One of the appropriate ways to reduce the disposal of waste glass in landfills is by using it in portland cement concrete as an aggregate material and/or supplementary cementitious material to replace portion of portland cement. The high silica content of the soda glass (approximately 70%) can potentially behave as a pozzolanic material when finely ground, which may enhance the mechanical and durability properties …

Alkali-~Activated Fly Ash Binders: Feasibility As A Sustainable Alternative To Ordinary Portland Cement For Pre-~Cast Systems, Kimberly Sierra

UNLV Theses, Dissertations, Professional Papers, and Capstones

Fresh, load-dependent, transport, and durability properties of alkali-activated fly ash mortars were studied. The influences of activator concentration, solution-to-binder ratio, curing condition, activator type, and sodium silicate-to-total solution ratio on the properties of the studied alkali-activated mortars were examined. This study was divided in two phases. The first phase dealt with the use of sodium hydroxide as the sole activator. The second phase of the study was divided into two parts, both of which used a combination of sodium hydroxide and sodium silicate as the activator solution. Part I of phase II used elevated temperature curing conditions, whereas part II …

Reducing The Porosity And Sealing Cracks By Using Crystalline Admixture In Conventional Concrete, Visar Krelani, Liberato Ferrara

UBT International Conference

There is a continuous increase of quality on civil engineering materials in developed countries and parallel increase of need for new constructions in developing countries. Professional community should propose solutions for the durability that can resist in different severe environments. The most important factor that can affect concrete durability is represented by the pore distribution. Transport properties can take place through the porous network inside the cementitious composites and the aggregates interface, permitting the ingress of aggressive agents damaging concrete function intrinsically as a material and the well-functioning of the entire structure. The use of a crystalline admixture during the …

Feasibility Of Cathodic Protection In Grouted Post Tensioned Tendons - Exploratory Model Calculations, Jacob Dharma Bumgardner

USF Tampa Graduate Theses and Dissertations

Recent corrosion related failures of grouted post tensioned tendons, even after the introduction of improved grouts, have led to renewed interest in supplemental or backup means of corrosion control for these systems. A finite element model is presented to explore feasibility of impressed current cathodic protection of strand in grouted tendons. The model examines polarization evolution as function of service time and includes consideration of anode placement and size, grout porosity, pore water alkalinity, electrochemical species diffusivity and applied voltage on the polarization efficacy and durability of such a system. The exploratory model projections suggested that, within the context of …

Shear Strengthening Of Reinforced Concrete Beams Using Textile-Reinforced Mortar, Oluwafunmilayo Morenike Awani

Theses

The effectiveness of using carbon textile-reinforced mortar as an innovative technique to improve the shear response of reinforced concrete beams has been investigated. The research comprised double-shear bond testing on bond behavior of textile-reinforced mortar, large-scale beam testing on shear response of reinforced concrete beams strengthened with textile-reinforced mortar, and nonlinear finite element modeling of the tested beam specimens. Test variables of the double-shear bond testing were the matrix type, and width/length of the bonded area, whereas for the large-scale beam testing, the variables included the number of textile-reinforced mortar layers, matrix type, and amount of internal stirrups. Results of …

Analytical Model Of Ultrasonic Pulse Velocity Of Waste Lcd Glass Concrete, Chien-Chih Wang, Her-Yung Wang, Shyh-Haur Chen, Chi Huang

Journal of Marine Science and Technology–Taiwan

The purpose of this study is to establish a prediction model for the ultrasonic pulse velocity (UPV) of waste LCD glass concrete and then analyze the results obtained from a series of laboratory tests. The power function is used to perform the nonlinear-multivariate regression analysis of the UPV prediction model, with parameters such as water-binder ratio (w/b), curing age (t) and waste glass content (G). According to the relative regression analysis, the UPV prediction model is developed. The calculated results are in accord with the laboratory-measured data, which are the concrete UPV of various mix proportions. The regression analysis results …

Evaluation Of Deterioration Of Structural Concrete Due To Chloride Intrusion And Other Damaging Mechanisms, Sudhir Palle, Brian K. Howell, Theodore Hopwood Ii, Bobby W. Meade

Kentucky Transportation Center Research Report

Kentucky's bridges continue to age and experience distress. The intrusion of chlorides into concrete remains the primary mechanism for deterioration. It leads to reinforcing steel corrosion that damages the adjoining concrete structure. This study found problematic chloride concentrations in Kentucky concrete bridge elements (decks, pier caps, abutments). Chloride levels have been found at concentrations sufficient to initiate reinforcing steel corrosion. In some cases, chloride concentrations were sufficient to cause accelerated corrosion and produce major section loss of reinforcing steel. Advanced stages of corrosion such as these typically require costly repairs and maintenance to extend the service life of bridges.

Field …

Post-Tensioned Concrete Shear Wall, Purdue Ect Team

ECT Fact Sheets Archive

The post-tension concrete shear wall by Tipping Mar will replace the conventional concrete shear wall in earthquake prone areas in many instances, depending on the height and scale of the building.

Effect Of Mortar Coating On Concrete Carbonation, Wen-Hu Tsao, Ming-Te Liang, Jiang-Jhy Chang, Nai-Ming Huang

Journal of Marine Science and Technology–Taiwan

The mechanism of the effect of mortar coating on carbonation of concrete is investigated. Theoretical methods of Fick's first and second laws of linear diffusion are used to calculate the carbonation depth of concrete without and with mortar coating, respectively. Theoretical analyses are also done to obtain the carbonation retard coefficients of mortar coating on concrete with surface coatings. A great deal of well organized experimental tests are carried out to verify the values of calculation. The results of present study indicate that the suitable mortar coating on concrete can effectively delay carbonation of concrete. The carbonation depth is inversely …

Measurement Of Transfer And Development Lengths Of 0.7 In. Strands On Pretensioned Concrete Elements, Canh Ngoc Dang

Graduate Theses and Dissertations

The implementation of 0.7 in. (17.8 mm), Grade 270 (1860), low-relaxation prestressing strands in construction is slow regardless of its advantages over the use of 0.6 in. (15.2 mm) and 0.5 in. (12.7 mm) strands. The limited research data and unavailable design guidelines partially account for the slow utilization. This study measured transfer and development length, and evaluated applicable strand spacing of 0.7 in. (17.8 mm) prestressing strands for 24 pretensioned concrete beams. Each beam contained one prestressing strand or two prestressing strands placed at spacing of 2.0 in. (51 mm). The beams were fabricated with high strength, conventional concrete …

Blind Source Separation For Feature Detection And Segmentation In Ground Penetrating Radar (Gpr) Lmaging Of Concrete Bridge Decks For Nondestructive Condition Assessment, Vincent Krause

Dissertations

Concrete bridge decks require periodic condition assessment and preventive maintenance to extend their useful lifespan. Nondestructive evaluation methods such as Ground Penetrating Radar (GPR) are slowly beginning to replace or complement the manual (visual) assessment of bridge conditions for detecting defects at their early stages. However, GPR scans of bridge decks are frequently cluttered with high amplitude reflections from known parts of the bridge deck, which make the detection of defects’ low amplitude reflections difficult. One such known part is the embedded steel reinforcement bars known as rebar.

This dissertation presents a novel approach to the automated detection of defects …

Characterisation And Applications Of Iron Ore Tailings In Building And Construction Projects, Francis Atta Kuranchie

Theses: Doctorates and Masters

The mine tailings are generated as the wastes worldwide as a result of exploration, excavation, blasting, beneficiation and extraction of mineral ores. In Western Australia, due to the extensive mining activities and increasing low grade ores, there is generation of mine tailings in large quantities, which could lead to environmental and disposal problems. The common practice of handling the tailings are to store them in tailing dams or as stockpiles near mine sites. Limited quantities are sometimes used as backfills and other applications. The utilisation of tailings in building and construction projects, which may consume a large volume of wastes, …

Numerical Simulation Of Prestressed Precast Concrete Bridge Deck Panels Using Damage Plasticity Model, Wei Ren, Lesley Sneed, Yang Yang, Ruili He

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

No abstract provided.

Advanced Sustainable Concrete Materials For Infrastructure Applications, Kaylea Ann Smith

Masters Theses

"This study was performed to examine the effects of cement replaced by high volumes of Class C fly-ash on durability characteristics of concrete up to 120 days. Specifically, this study investigates possibility of amending American Society for Testing and Materials (ASTM) to allow High Volume Fly-ash (HVFA) concrete to cure until later ages prior to testing instead of 28 days. Five mix designs were compared with varying fly-ash percentages from 0 to 70% (by total cementitious mass). No other additives were present in any of the five mix designs. Water-to-cementitious ratio (w/cm) and total cementitious material remained constant as 0.40 …

The Role Of Shrinkage Strains Causing Early-Age Cracking In Cast-In-Place Concrete Bridge Decks, Tayyebeh Mohammadi, Baolin Wan, Christopher M. Foley

Civil and Environmental Engineering Faculty Research and Publications

Early-age cracking in cast-in-place reinforced concrete bridge decks is occurring more frequently now than three decades ago and principle factors that lead to early-age deck cracking are not fully understood. A finite element (FE) simulation methodology for assessing the role of shrinkage-induced strains in generating early-age bridge deck cracking is described. The simulations conducted indicate that drying shrinkage appears to be capable of causing transverse (and possibly longitudinal) bridge deck cracks as early as 9 to II days after bridge deck placement. The drying-shrinkage induced stresses would result in transverse cracking over interior pier supports in a typical bridge superstructure …

Utilisation Of Iron Ore Tailings As Aggregates In Concrete, Francis Atta Kuranchie, Sanjay Kumar Shukla, Daryoush Habibi, Alireza Mohyeddin

Research outputs 2014 to 2021

Sustainable handling of iron ore tailings is of prime concern to all stakeholders who are into iron ore mining. This study seeks to add value to the tailings by utilising them as a replacement for aggregates in concrete. A concrete mix of grade 40 MPa was prepared in the laboratory with water–cement ratio of 0.5. The concrete were cured for 1, 2, 3, 7, 14 and 28 days. The properties of the concrete such as workability, durability, density, compressive strength and indirect tensile strength were tested. A controlled mix of concrete was also prepared in similar way using conventional materials …

Factors Affecting The Seismic Behavior Of Segmental Precast Bridge Columns, Haitham Dawood, Mohamed Elgawady, Joshua Hewes

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This manuscript discusses the design parameters that potentially affect the lateral seismic response of segmental precast post-tensioned bridge piers. The piers consist of precast circular cross section segments stacked one on top of the other with concentric tendons passing through ducts made in the segments during casting. The bottommost segments of the piers were encased in steel tubes to enhance ductility and minimize damage. An FE model was used to investigate different design parameters and how they influence the lateral force — displacement response of the piers. Design parameters investigated included the initial post-tensioning stress as a percentage of the …

Performance Of Frp-Retrofitted Concrete Bridge Columns Under Blast Loading, R. Zheng, P. Zohrevand, H. Erdogan, Amir Mirmiran

Civil Engineering Faculty Publications and Presentations

Contrary to military or essential government buildings, most bridges are designed without any consideration for blast resistance. Fiber-reinforced polymers (FRPs) can provide an effective means for strengthening of critical bridges against such loading. This study has focused on the effectiveness of FRP retrofitting in the dynamic response of reinforced concrete bridge columns under blast loading. Using a simplified equivalent I-section with a virtual material lumped at the two flanges; a lightly meshed uniaxial finite element model was developed and successfully validated against previous studies. The proposed model was then used for a thorough parametric study on the blast resistance of …

Using A Centrifuge For Quality Control Of Pre-Wetted Lightweight Aggregate In Internally Cured Concrete, Albert E. Miller

Open Access Theses

Early age shrinkage of cementitious systems can result in an increased potential for cracking which can lead to a reduction in service life. Early age shrinkage cracking can be particularly problematic for high strength concretes, which are often specified due to their high strength and low permeability. However, these high strength concretes frequently exhibit a reduction in the internal relative humidity (RH) due to the hydration reaction (chemical shrinkage) and self-desiccation which results in a bulk shrinkage, termed autogenous shrinkage, which is substantial at early ages. Due to the low permeability of these concretes, standard external curing is not always …

Durability Of Silane Sealer In A Highly Alkaline Environment, Cameron David Murray

Graduate Theses and Dissertations

Alkali-silica reaction (ASR) is a chemical reaction between siliceous minerals present in certain aggregates and alkalis in the concrete pore solution. The reaction can lead to expansion and severe damage in concrete members. One method to mitigate ASR expansion is to use a penetrating sealer such as silane. A set of columns located in a food preparation facility was treated with silane and a complimentary laboratory study was performed. A cleaning regimen involving application of an alkaline cleaner is employed at the facility, followed by rinsing with hot, pressurized water. The purpose of this research is to evaluate the effectiveness …

Application Of Bamboo For Flexural And Shear Reinforcement In Concrete Beams, Nathan Schneider

All Theses

As the developing world is industrializing and people migrate to cities, the need for infrastructure is growing quickly and concrete has become one of the most widely used construction materials. One poor construction practice observed widely across the developing world is the minimal use of reinforcement for concrete structures due to the high cost of steel. As a low-cost, high-performance material with good mechanical properties, bamboo has been investigated as an alternative to steel for reinforcing concrete. The goal of this research is to add to the knowledge base of bamboo reinforced concrete (BRC) by investigating a unique stirrup design …

Transport Properties Of Nano-Silica Contained Self-Consolidating Concrete, Borhan Moradi

UNLV Theses, Dissertations, Professional Papers, and Capstones

In this research study, transport properties of various self-consolidating concretes (SCCs) containing nano-particles (SiO2) were investigated. Nano-silica replaced a portion of the cementitious materials at different replacement levels ranging from 1.5 to 7.5% by weight. For the purpose of this investigation, flow, bulk, and transport properties of SCCs were studied. The investigated transport properties were absorption, water penetration, rapid chloride permeability, capillary absorption, rapid migration, and chloride diffusion. Transport properties of nano-silica SCCs were also compared to those of equivalent silica fume (micro silica) contained concretes, as well as those of control mixture (concrete without nano or micro silica).

Test …

Influence Of Fly Ash On Surface Chloride Concentration Under Shallow Immersion Condition, Jun Liu, Xiaodong Wang, Feng Xing, Ningxu Han

International Conference on Durability of Concrete Structures

In this paper, the influence of fly ash content on concrete surface chloride concentration was investigated through periodical tests of surface chloride concentration of concrete by immersing three kinds of concrete specimens in 5.0 wt.% sodium chloride solution. One kind of specimen is common concrete without fly ash, whereas the other two kinds of specimens are mixed with fly ash. The results show that the surface chloride ion concentration ranges from 0.295 to 0.777 wt.% for the immersed concrete samples in this study; in the initial stage of immersion, the concrete surface chloride ion concentration is affected by added fly …

Compositional Model Checking Of Concurrent Systems, Hao Zheng, Zhen Zhang, Chris J. Myers, Emmanuel Rodriguez, Yingying Zhang

Electrical and Computer Engineering Faculty Publications

This paper presents a compositional framework to address the state explosion problem in model checking of concurrent systems. This framework takes as input a system model described as a network of communicating components in a high-level description language, finds the local state transition models for each individual component where local properties can be verified, and then iteratively reduces and composes the component state transition models to form a reduced global model for the entire system where global safety properties can be verified. The state space reductions used in this framework result in a reduced model that contains the exact same …

Failure Mechanisms And Key Parameters Of Frp Debonding From Cracked Concrete Beams, Tayyebeh Mohammadi

Dissertations (1934 -)

Intermediate crack (IC) induced debonding failure of Fiber Reinforced Polymer (FRP)-strengthened reinforced concrete beams starts at the tip of flexural/shear cracks within the shear span and propagates towards the FRP plate termination. In this study, experimental and numerical programs are performed to characterize and predict the failure mechanisms of IC debonding failure, and identify the key parameters affecting such failure. It is found that the bond-slip relation obtained from the pullout test does not represent the bond-slip relation of the FRP/concrete interface in the FRP-strengthened concrete beams, and it cannot be directly used for predicting the load capacity of the …