Engineering Commons^™

Numerical Simulation For The Hydrodynamic Performance Of Hydropower Turbine Near Free Surface, Zeda Yin

Theses, Dissertations and Capstones

The performance of hydropower turbine in shallow water can be affected by the presence of free surface. Therefore, it is of great interest to investigate the influence of free surface on hydropower turbine performance through computational simulations. For a better understanding of flow field around hydropower turbine operating in shallow water, it is important to analyze the flow over a single hydrofoil beneath free surface first. Therefore, as the first part of this thesis, the Computational Fluid Dynamics (CFD) methodology was used for numerical simulation of 2D unsteady incompressible viscous flow over a hydrofoil under the free surface. The computation …

Employing 2-D Cfd & Lrb Model Around Trees To Improve Vawt Placement, David Chukwuebuka Bassey

All Graduate Theses, Dissertations, and Other Capstone Projects

In the placement of vertical axis wind turbines, trees are a constant presence in the vicinity. They are found to grow at different height and shape configurations. And in areas such as the Minnesota State University, Mankato (MNSU) campus, they serve as blockage to airflow; limiting the efficiency of installed turbines. This work sets the precedent for the validation of vegetative numerical models created for the Xcel Energy Research Development Fund (RDF) project.

Using two-dimensional (2-D) numerical simulations of porous cylinders placed in a rectangular medium of air, insight into the flow profile and distribution in the leeward side of …

Aerodynamics Of Fan Blade Blending, Clint J. Knape

Browse all Theses and Dissertations

Blending is a method of fan and compressor blade repair. The goal of the blending process is to remove stress concentration points such as cracks and nicks along the leading, trailing, or tip edges of the blade. The stressed areas are typically removed by grinding or cropping away the surrounding material. For integrally bladed rotor (IBR) disks, repairing a damaged blade is much more economical than replacing the entire disk. However, the change in shape of the blade will change the local aerodynamics and result in mistuning, both structurally and aerodynamically. In a worst case scenario, the change in the …

Using Cfd To Improve Off-Design Throughflow Analysis, Troy J. Lanchman

Browse all Theses and Dissertations

In turbomachinery design, complex internal flows give rise to significant losses and blockage whose effects are difficult to properly analyze without detailed computational fluid dynamics (CFD) methods or experiments. In a typical design method, CFD is used in conjunction with simpler throughflow or cascade codes to hasten the process. However, the lesser physical accuracy of the design codes demands the inclusion of models to improve the accuracy of the throughflow codes. This thesis aims to use CFD data to generate improved loss and blockage models for a 2D compressor throughflow code by matching throughflow data to CFD data using optimizations. …

The Effects Of Low Aspect Ratio And Heat Exchanging Internals On The Bubble Properties And Flow Regime In A Pilot-Plant Bubble/Slurry Bubble Column For Fischer-Tropsch Synthesis, Hayder Al-Naseri

Doctoral Dissertations

"Fischer-Tropsch synthesis (F-T) is a process utilized to convert the syngas mixture of CO and H₂ to synthetic fuel and chemicals that executed commercially by using the bubble/slurry bubble column reactor. The experimental results reveal that the investigated parameters, in terms the presence of internals, and reducing the aspect ratio and the solids loading, increase the local gas holdup, interfacial area, bubble passage frequency, and decrease the bubble rise velocity, bubble chord length. Meanwhile, the aspect ratio H/D = 4, and 5 provide enough height to established the fully developed flow regime. As a result of the variation in …

Blade Design And Analysis Of Horizontal-Axis Wind Turbine: Cfd And Experimental Investigation Of Blades Design, Relwinde Fabrice Zongo

College of Graduate Studies: Theses & Dissertations

The present thesis focuses on the investigations of the computational fluid dynamics analysis and the experimental study of small scales Horizontal Axis Wind Turbine (HAWT) blades. The initial steps are taken; in the process of this research were the selection of the airfoil type to be used in each blade design and the creation of a blade design with high efficiency operating in a low wind speed zone. For the mentioned blade design process, the following airfoils were selected respectively NACA 0010, NACA 0012, NACA 1412, NACA 2412, NACA 2414, NACA 4412 and NACA 6412. This selection intends to provide …

Computational Study Of Flow Interactions Over A Close Coupled Canard-Wing On Fighter, Setyawan Bekti Wibowo, Sutrisno Sutrisno, Tri Agung Rohmat

International Journal of Aviation, Aeronautics, and Aerospace

There have been many attempts to improve the flying performance of a fighter. By modifying the flow that occurs along the fuselage is expected to improve the performance of the aircraft. One of the indicators of combat aircraft performance is the ability to perform maneuver movement. Adding a canard as forewing on the fighter wing configuration is considered capable of raising the ability in maneuver movement. The use of canard-delta pairs will affect the performance and aerodynamic characteristics of the plane. Wings and canards with delta configuration will make the rolled-up vortex as a lifting force producer on the aircraft. …

Parametric Design And Optimization Of A Pivoting S-Type Rudder For Containerships, Chen-Wei Chen, Tsung-Yueh Lin, Bo-Yen Chen, Jen-Shiang Kouh

Journal of Marine Science and Technology–Taiwan

This study proposes an energy-saving S-type rudder design to deal with the inhomogeneous inflow from a rotating propeller behind a containership. The S-type rudder was modelled parametrically using four-digit NACA foils as section profiles together with Non-uniform rational B-splines (NURBS) surface formulations. A three-stage optimization process is proposed to reduce the number of design iterations necessary to achieve an optimal design. The propulsion simulations were done via CFD software, which solves the hydrodynamics of viscous flow, as governed by the Reynold-averaged Navier-Stokes (RANS) equations. Validations were performed with experimental model tests, including hull resistance, propeller open-water performance, and propulsion in …

Cfd Modeling Of Smoke Movement In An Atrium, Robin Wu

UNLV Theses, Dissertations, Professional Papers, and Capstones

The purpose of this paper is to better understand the behavior of smoke movement in an atrium. Thus gives first responders and civilians in and out of building a better understanding

With the advancements of modern technology, computers and softwares make simulation models possible such as fire models to simulate fire and smoke movements. In this paper, a computational fluid dynamic (CFD) software Fire Dynamic Simulator (FDS) is used to conduct a series of atrium tests to investigate the effectiveness of smoke exhaust systems. FDS solves the Navier-Stokes equations appropriate for low speed flows (Ma < 0.3) with an emphasis on smoke, heat transport and CO2 concentrations from fires. The default turbulence model used in FDS simulation is the Large Eddy Simulation (LES), which is the solution of Navier-Stokes equations at low speed.

The compartment tested was 9 …

Observation Of The Interaction Between A Transonic Shock Wave And A Wingtip Vortex||, Troy T. Bushmire

Mechanical and Aerospace Engineering Theses - Archive

The present study observes the interaction between two fundamental phenomena in fluid mechanics: the transonic shock wave and the wingtip vortex. While these are two areas of fluid mechanics in which extensive experimental and numerical research has been conducted, there is little information on the interaction between the two. The present study numerically simulates a wing with a NACA-0012 section at Mach 0.758 and observes the interaction between the transonic shock wave and wingtip vortex for various angles of attack. The focus of the study is on the surface flow topology and the flow exterior to the boundary layer. Results …

Wall Shear Stress In Simplified And Scanned Avian Respiratory Airways, Michael Sterling Farnsworth

Theses and Dissertations

Birds uniquely produce sound through a vocal organ known as a syrinx. The presence of wall shear stress acting on the airway cells of any organism will affect how airway cells develop and multiply. Unique features of avian airway geometry and breathing pattern might have contributed to the development of the syrinx. This thesis examines wall shear stress in the trachea and first bronchi of avian geometries using computational fluid dynamics. The computational fluid dynamic simulations underwent grid- and time-independence studies and were validated using particle image velocimetry. Parameters such as bird size, bronchial branching angle, and breathing waveform were …

Effect Of Aerogel On The Thermal Performance Of Corrugated Composite Sandwich Structures, Jacob Dillon Chess

Master's Theses

Current insulation solutions across multiple industries, especially the commercial sector, can be bulky and ineffective when considering their volume. Aerogels are excellent insulators, exhibiting low thermal conductivities and low densities with a porosity of around 95%. Such characteristics make aerogels effective in decreasing conductive heat transfer within a solid. These requirements are crucial for aerospace and spaceflight applications, where sensitive components exist among extreme temperature environments. When implemented into insulation applications, aerogel can perform better than existing technology while using less material, which limits the amount of volume allocated for insulation. The application of these materials into composites can result …

Micro-Nozzle Simulation And Test For An Electrothermal Plasma Thruster, Tyler J. Croteau

Master's Theses

With an increased demand in Cube Satellite (CubeSat) development for low cost science and exploration missions, a push for the development of micro-propulsion technology has emerged, which seeks to increase CubeSat capabilities for novel mission concepts. One type of micro-propulsion system currently under development, known as Pocket Rocket, is an electrothermal plasma micro-thruster.

Pocket Rocket uses a capacitively coupled plasma, generated by radio-frequency, in order to provide neutral gas heating via ion-neutral collisions within a gas discharge tube. When compared to a cold-gas thruster of similar size, this gas heating mechanism allows Pocket Rocket to increase the exit thermal velocity …

Investigating The Effect Of An Upstream Spheroid On Tandem Hydrofoils, Joel Tynan Guerra

Master's Theses

This thesis documents a series of three dimensional unsteady Reynolds Averaged Navier-Stokes CFD simulations used to investigate the influence of an upstream prolate spheroid body on tandem pitching hydrofoils. The model is validated by performing separate CFD simulations on the body and pitching hydrofoils and comparing results to existing experimental data. The simulations were run for a range of Strouhal numbers (0.2-0.5) and phase differences (0-π). Results were compared to identical simulations without an upstream body to determine how the body affects thrust generation and the unsteady flow field.

The combined time-averaged thrust increases with Strouhal number, and is highest …

Analysis Of The Effects Of Inlet Distortion On Stall Cell Formation In A Transonic Compressor Using Create-Av Kestrel, Mikkel Andreas Unrau

Theses and Dissertations

Accurately predicting fan performance, including bounds of operation, is an important function of any Computational Fluid Dynamics (CFD) package. The presented research uses a CFD code developed as part of the Computational Research and Engineering Acquisition Tools and Environment (CREATE), known as Kestrel, to evaluate a single stage compressor at various operating conditions. Steady-state, single-passage simulations are carried out to validate capabilities recently added to Kestrel. The analysis includes generating speedlines of total pressure ratio and efficiency, as well as radial total temperature and total pressure profiles at two axial locations in the compressor at various operating conditions and fan …

Fluid Agitation Studies For Drug Product Containers Using Computational Fluid Dynamics, Matthew Hiroki Ichinose

Master's Theses

At Amgen, the Automated Vision Inspection (AVI) systems capture the movement of unwanted particles in Amgen's drug product containers. For quality inspection, the AVI system must detect these undesired particles using a high speed spin-stop agitation process. To better understand the fluid movements to swirl the particles away from the walls, Computational Fluid Dynamics (CFD) is used to analyze the nature of the two phase flow of air and a liquid solution.

Several 2-D and 3-D models were developed using Fluent to create simulations of Amgen's drug product containers for a 1 mL syringe, 2.25 mL syringe, and a 5 …

A Computational Fluid Dynamics (Cfd) Analysis Of The Aerodynamic Effects Of The Seams On A Two-Dimensional Representation Of A Soccer Ball, Allen R. Rohr

Master's Theses

Most major sports today use a dedicated ball or projectile with specific shape, size, and surface geometry, except for soccer. Over the history of the sport, the surface geometry and design stayed relatively unchanged, sewn together using 32 pentagonal and hexagonal panels. However, recent innovations in panel designs differ substantially from the traditional 32 panel ball. The effects these new designs have on the aerodynamic characteristics of the ball have remained largely unknown, even with the influx of experimental research completed in the past decade. Experimental studies have been broad in scope, analyzing an entire ball in wind tunnels or …

Liquid Jet Penetration And Breakup In A Free Supersonic Gas Jet, Hansen Jones

LSU Master's Theses

In the testing of today’s rocket engines, both on large scale vertical test stands and smaller subscale horizontal component testing stands, it is extremely important to be able to accurately quantify and mitigate the thermal and acoustic loads the engines will generate on test stand infrastructure. Due to the large number of parameters that must be considered for many cases, development of a multi-phase computational code is under way to properly analyze and design water spray cooling systems used at NASA’s Stennis Space Center (SSC) and across other NASA centers. As such, a small-scale experiment has been conducted at Louisiana …

Development And Application Of Rotation And Curvature Correction To Wray-Agarwal Turbulence Model, Xiao Zhang

McKelvey School of Engineering Graduate Student Theses & Dissertations

Computational Fluid Dynamics (CFD) is increasingly playing a significant role in the analysis and design of aircrafts, turbomachines, automobiles, and in many other industrial applications. In majority of the applications, the fluid flow is generally turbulent. The accurate prediction of turbulent flows to date remains a challenging problem in CFD. In almost all industrial applications, Reynolds-Averaged Navier-Stokes (RANS) equations in conjunction with a turbulence model are employed for simulation and prediction of turbulent flows. Currently the one-equation (namely the Spalart-Allmaras (SA) and Wray-Agarwal (WA) and two-equation (namely the k-ε and Shear Stress Transport k-ω) turbulence models remain the most widely …

Computer Modeling Of Close-To-Ground Tornado Wind-Fields For Different Tornado Widths, Mohammadhossein Kashefizadeh

Graduate Theses and Dissertations

Tornadoes induce different wind forces on buildings than straight-line (SL) winds. The tangential velocity (Vθ) of tornados is the main parameter that causes damage to the buildings. In-field tornado measurements cannot evaluate the tornado’s Vθ at less than 20m above ground level (AGL). The laboratory tornado simulators suggest that the Swirl ratio (S) and the radius (ro) are the most influential factors affecting Vθ. However, due to scaling problems, laboratory simulators cannot report the Vθ for elevations less than 10m AGL. Well refined computational fluid dynamics (CFD) models can evaluate the Vθ at less than 10m AGL. However, the CFD …

Validation Of Cfd Simulations For Hypersonic Flow Over A Yawed Cone, Julian Cecil

McKelvey School of Engineering Graduate Student Theses & Dissertations

This study aims to numerically simulate the wind tunnel results for hypersonic flow over a circular cone of semi-apex angle of 10 degrees yawed from 0° to 20° using the commercial computational fluid dynamics software ANSYS Fluent. The ANSYS workbench is used to create the 10° semi-apex circular cone with a shock aligned structured mesh of 3.05 million cells surrounding the cone. Simulation boundary conditions for pressure and temperature in the far field correspond to Tracy’s wind tunnel experiment at Cal Tech. The six simulations cases are conducted for yaw angles of 0, 8, 12, 16, 20 and 24 degrees. …

Computational Fluid Dynamics Model For Air Velocity Through A Poultry Transport Trailer In A Holding Shed, Christian Heymsfield

Graduate Theses and Dissertations

Broiler production in Arkansas was valued at over $3.6 billion in 2013 (University of Arkansas Division of Agriculture Cooperative Extension Service). Consequently, improvement in any phase of the production process can have significant economic impact and animal welfare implications. One area of concern for the poultry industry is thermal stress experienced by the birds after arrival at the processing plant and before they are taken in to be processed, during which time they are left to wait in holding sheds. Various cooling strategies exist to mitigate heat stress in holding sheds, but in most cases it is unlikely that they …

Comparing Stenotic Blood Flow In Three- And Two-Dimensional Arterial Renderings Using Computational Fluid Dynamics And Multiphase Mean Age Theory., Jacob S. Garza

Electronic Theses and Dissertations

Over one million invasive coronary angiography procedures are performed annually in patients who experience chest pain or are known to have coronary artery disease. The procedure is carried out to ascertain the degree of arterial blockage (stenosis) that hinders blood flow to the heart. A cardiologist performing the procedure determines the physiological degree of a stenosis by either visual estimation, which is routine practice, or by invasively measuring fractional flow reserve (FFR), which is the current gold standard that has been demonstrated to improve patient outcomes and temper the cost of healthcare. Nevertheless, FFR is performed in only 10–20% of …

Immersive Visualization In Biomedical Computational Fluid Dynamics And Didactic Teaching And Learning, John Thomas Venn

Master's Theses (2009 -)

Virtual reality (VR) can stimulate active learning, critical thinking, decision making and improved performance. It requires a medium to show virtual content, which is called a virtual environment (VE). The MARquette Visualization Lab (MARVL) is an example of a VE. Robust processes and workflows that allow for the creation of content for use within MARVL further increases the userbase for this valuable resource. A workflow was created to display biomedical computational fluid dynamics (CFD) and complementary data in a wide range of VE’s. This allows a researcher to study the simulation in its natural three-dimensional (3D) morphology. In addition, it …

Investigation Of Microfluidic Kelvin Water Dropper And Its Applications In Contact And Contactless Electrowetting, Elias Yazdanshenas

Mechanical & Aerospace Engineering Theses & Dissertations

A typical Kelvin water dropper is a device that can convert gravitational potential energy to a high voltage electrostatic. This device consists of two inductors, two collectors, tubes, and electrical connections. A Kelvin water dropper is able to generate extremely high voltage by separating ions using two positive feedback loops. A Kelvin water dropper provides a low cost solution for the applications in which high voltage is needed. In the present research, low cost Microfluidic Kelvin Water Droppers (MKWDs) were developed and built in house for electrowetting applications. Two MKWDs with different tube inner diameters (254 and 508 μm) were …

Modeling And Validation Of Local Electrowinning Electrode Current Density Using Two Phase Flow And Nernst-Planck Equations, Joshua M. Werner, W. Zeng, M. L. Free, Z. Zhang, J. Cho

Mining Engineering Faculty Publications

In this work we demonstrate the validity of a multi-physics model using COMSOL to predict the local current density distribution at the cathode of a copper electrowinning test cell. Important developments utilizing Euler-Euler bubbly flow with coupled Nernst-Planck transport equations allow additional insights into deposit characteristics and topographies.

Low Reynolds Number Numerical Simulation Of The Aerodynamic Coefficients Of A 3d Wing, Khurshid Malik, Waqar Asrar, Erwin Sulaeman

International Journal of Aviation, Aeronautics, and Aerospace

A low Reynolds number, three-dimensional CFD analysis is carried out for a finite flat plate wing using the commercial CFD code STAR CCM+. The six-aerodynamic force and moment components C_L, C_D, C_M, C_N, C_l, C_Y and their derivatives are computed at a Reynolds numbers of 3x10⁵ by varying the pitch, roll and yaw angles about the quarter chord point. The computed results have been validated with experimental aerodynamic balance data when possible. The results indicate that roll and yaw angle affect the aerodynamic coefficients of the flat plate …

Design Of A Novel Tissue Culture System To Subject Aortic Tissue To Multidirectional Bicuspid Aortic Valve Wall Shear Stress, Janet Liu

Browse all Theses and Dissertations

Blood vessels experience complex hemodynamics marked by three-dimensionality and pulsatility. Arterial endothelial cells interact with the characteristics of the fluid wall shear stress (WSS) to maintain homeostasis or promote disease states. In particular, the bicuspid aortic valve (BAV), a congenital heart valve anatomy consisting of two leaflets instead of three, is associated with aortic complications presumably promoted by hemodynamic abnormalities. While devices have been used to test this hypothesis, their capabilities are limited to the generation of time-varying WSS magnitude in one direction. However, the increased flow helicity generated by BAVs in the aorta is expected to result in increased …

Cardiovascular Biomechanical Models, Ethan Kung

Publications

Computational and in vitro methods offer powerful means to model the cardiovascular system and investigate biomechanics related to blood flow, cardiovascular tissue, and medical devices. These models can be constructed to directly describe human anatomy and physiology, and can be more highly controlled compared to animal models. Low-order models composed of lumped-parameter elements and simplified descriptions of cardiac function can capture the global physiology, while high-order models exhibiting detailed 3D anatomy and dynamics can provide highly realistic replication of biomechanical interactions in a small region of the circulation. Multiscale models offer the freedom to capture biomechanics in different regions at …

Geometric Optimization Of A Heaving Point Absorber Wave Energy Converter, Ian Riley

College of Graduate Studies: Theses & Dissertations

Wave energy shows significant potential for development into a competitive renewable energy source. Non-renewable resources are finite and contribute to adverse effects on the environment. Development of wave energy conversion devices that use heave motion as the primary driver for converting wave energy into electrical potential is explored through optimizing the geometry of an axisymmetric partially submerged buoy in deep water. The governing equations of motion and hydrodynamic forces are solved for in one degree of freedom using ANSYS Aqwa. An external PTO device is simulated to induce power capture in the system. Four different geometric shapes are tested and …