Engineering Commons^™

Advancements In Sinkhole Remediation: Field Data-Driven Sinkhole Grout Volume Prediction Model Via Machine Learning-Based Regression Analysis, Bubryur Kim, Yuvaraj Natarajan, K. R. Sri Preethaa, V. Danushkumar, Ryan Shamet, Jiannan Chen, Rui Xie, Timothy Copeland, Boo Hyun Nam, Jinwoo An

Civil Engineering Faculty Publications

Sinkhole formation poses a significant geohazard in karst regions, where unpredictable subsurface erosion often necessitates costly grouting for stabilization. Accurate estimation of grout volume remains a persistent challenge due to spatial variability, site-specific conditions, and the limitations of traditional empirical methods. This study introduces a novel machine learning-based regression model for grout volume prediction that integrates cone penetration test (CPT)-derived Sinkhole Resistance Ratio (SRR) values, spatial correlations between CPT and grouting points (GPs), and field-recorded grout volumes from six sinkhole sites in Florida. Three data transformation methods, the Proximal Allocation Method (PAM), the Equitable Distribution Method (EDM), and the Threshold-based …

Establishing Procedures For Primary Human Myoblast Cell Culture, Erica Duffy

Biomedical Engineering

Peripheral Artery Disease (PAD) affects an estimated 200 million people worldwide and is the leading cause of amputation in the United States. PAD is characterized by atherosclerotic narrowing of arteries, resulting in ischemia from reduced blood flow to distal tissues. Although surgical and percutaneous interventions can restore perfusion, fewer than 50% of patients experience sustained benefit, highlighting the need for alternative therapeutic strategies. One promising approach is promoting arteriogenesis, the growth and outward remodeling of pre-existing collateral vessels that improve blood flow around the occluded arteries. Arteriogenesis is regulated by regenerative, M2-polarized macrophages, making macrophage polarization a key therapeutic target. …

A Human Factors Analysis And Classification System (Hfacs) Approach To Compare Cardiovascular, Orthopedics, Trauma Care, And Neurosurgery, Asfandyar Khan

Doctoral Dissertations and Master's Theses

Background: Despite significant progress in patient safety, human error continues to occur at high rates in procedural settings. Traditional safety models tend to focus on retrospective incident analysis, often overlooking the systemic conditions that allow errors to occur. The Human Factors Analysis and Classification System (HFACS) offers a proactive lens to understand how and where errors emerge and is useful for identifying active and latent failures.

Objective: To evaluate the utility and reliability of the Human Factors Analysis and Classification System (HFACS) in categorizing and comparing the pattern of frequencies (events) in cardiovascular, orthopedic, trauma care, and neurosurgical procedure.

Design, …

Thermal Management With Supercritical Carbon Dioxide Under Extreme Applications, Devon Hardy

Doctoral Dissertations and Master's Theses

A unique challenge in thermal system design is minimizing the power required to operate cooling systems while maintaining effective heat removal. Traditional cooling systems utilize single-phase fluids where the heat transfer mechanisms are well understood. To meet a variety of cooling demands, a range of technologies are available, including microchannel forced convection, jet impingement, porous media, nanofluids, pin fin arrays, and film cooling, each offering distinct advantages and limitations. While the performance of single- or two-phase cooling systems are generally predictable, in extreme thermal environments, new cooling solutions are needed to improve overall system efficiency and reliability.

Supercritical fluids, particularly …

Propeller Noise Prediction Of An Urban Air Mobility Vehicle In Urban Environment, Jie Hua

Doctoral Dissertations and Master's Theses

Urban Air Mobility (UAM) vehicles operate in complex, unsteady aerodynamic environments where wake interactions, gust and turbulence significantly affect both performance and noise generation. Understanding these mechanisms is critical for developing quieter and more efficient eVTOL systems that meet future community noise and certification requirements. This dissertation focuses on the high-fidelity numerical investigation of propeller noise in three representative unsteady loading scenarios: (i) transition (tilt) flight, (ii) edgewise inflow, and (iii) wake–propeller interaction. Each case emphasizes different physical mechanisms that dominate noise generation in UAM operations. Hybrid turbulence-resolving approaches—Detached Eddy Simulation (DES) and Delayed Detached Eddy Simulation (DDES)—are coupled with …

Occurrence Of Per And Polyfluoroalkyl Substances In Rural Wastewater Treatment Plants And Comparison To Large Treatments Plants, Madeleine Rauhauser

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Per and polyfluoroalkyl substances (PFAS) are a class of compounds defined by their carbon – fluorine bonds, which are incredibly strong. The strength of this bond makes these compounds very useful industrially, they are used as waterproof and grease proof coatings, and as fire retardants. The same thing that makes them useful industrially makes them incredibly recalcitrant in the environment, it is difficult to destroy these compounds. PFAS are also suspected to cause health impacts in people, such as kidney cancer and low birth weights. Wastewater has been commonly identified as a contributor to the amount of PFAS in the …

Further Evaluation Of Speed Tables On Roadway Curves: Simulation And Expeditionary Deployments, Nathan Reineke

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

The road network leading up to a United States military base is known as an Entry Control Facility, or ECF. Entry control facilities are used to shield military installations by monitoring vehicles and refusing access to unauthorized vehicles. Passive control devices, including speed tables, are used to disrupt or delay threat vehicles attempting to navigate ECFs at high speeds. The purpose of this research was to recommend optimized configurations of speed tables in combination with roadway curves which allow safe, efficient traversal for authorized vehicles and disruption or delay for threat vehicles.

First, an analytical model of a Tesla Model …

Automation And Upgrading Of Custom Cold Wall Uhv-Cvd Reactor For Group Iv Material Development, Alexander Golden

Graduate Theses and Dissertations

Group IV alloys have shown promising results for infrared optoelectronic applications where III-V materials are currently dominant. The III-V material system has vacancies that Group IV materials can fill, most importantly complementary metal oxide semiconductor (CMOS) process compatibility making quality devices much cheaper and widely available compared to the current state of the art. Silicon, being an indirect band gap Group IV material, has poor performance in optoelectronic applications but is the dominant material for most of the electronic industry. However, when silicon is alloyed or substituted with other group IV materials, these optoelectronic properties can be enhanced and, in …

Securing Connected And Autonomous Vehicles, Owana Marzia Moushi

Dissertations and Doctoral Documents, University of Nebraska-Lincoln, 2023–

A vehicular network is susceptible to various security flaws and attacks. Cryptographic techniques are used in vehicular networks but these alone cannot provide proper security to the network. Identifying various types of attacks is necessary to secure vehicular communication networks. In this dissertation, we focused on detecting various insider attacks in vehicular networks to enhance the security of the network.

Our first contribution in this dissertation is the detection of both binary and multi-class data replay and data replay Sybil attacks in vehicular networks. A publicly available dataset, VeReMi-Extension is used to detect these attacks. This dataset has been reformulated …

Exploring Transformative Learning Experiences In Engineering Doctoral And Post-Doctoral Education: Developing Non-Technical Competencies For Early-Career Academic Roles, Ibukunoluwa Eunice Salami

Dissertations and Doctoral Documents, University of Nebraska-Lincoln, 2023–

This dissertation explores the transformative learning experiences that early-career engineering faculty recounted from their doctoral and postdoctoral training and how these experiences shaped the development of non-technical competencies essential for academic success. Grounded in Mezirow’s Transformative Learning Theory (TLT) and the Competency-Based Professional Development Framework (CBPDF), the study examines how reflection and shifts in frames of reference supported competency growth and faculty readiness. A qualitative holistic single-case study design was employed. Data sources included semi-structured interviews with early-career engineering faculty and program learning objectives drawn from graduate handbooks. Data analysis was both deductive and inductive guided by Mezirow’s ten phases …

Real-Time, Co-Regulated Design For Cyber-Physical, Multi-Rotor Uas Swarms, Grant Simon Phillips

Dissertations and Doctoral Documents, University of Nebraska-Lincoln, 2023–

Uncrewed Aerial Systems (UAS) have been integrated into a wide range of research and industrial applications, with growing interest in extending mission duration and spatial coverage through coordinated multi-UAS systems, or swarms. While swarming offers the potential for extended mission endurance and robustness through advanced path-planning, control, and estimation algorithms, significant challenges arise when implementing these methods on decentralized platforms composed of size, weight, and power-constrained (SWaP) vehicles. Limitations in onboard computational capacity and congested communication channels can break critical design-time assumptions, which at best, will degrade application quality of service, and at worst, destabilize the fleet through excessive delays …

Comparative Assessment Of Lower Limb Neuromusculoskeletal Activation And Joint Kinematics In Normal And Impaired Gait, Jack Ryan Schule

Theses and Dissertations

This thesis evaluates whether accessible and affordable technologies can provide clinically significant, quantifiable gait analysis comparable to traditional marker-based motion capture systems. Modern high-end systems offer excellent accuracy but remain financially and logistically inaccessible to many clinicians and researchers. To address this gap, a framework was developed using markerless pose estimation using the model, MediaPipe, inertial measurement units (IMUs) processed through an Extended Kalman Filter (EKF), and surface electromyography (sEMG) to measure joint kinematics and neuromuscular activity during gait. An experiment was performed where data was collected from participants with both normal gait and pathologies including: Osgood–Schlatter disease, Plica Band …

Effect Of Capillary And Viscous Forces On Carbon Dioxide Desorption In Porous Adsorbent Layers, Caroline Isabel Mcclung

Theses and Dissertations

Temperature swing adsorption-based (TSA) carbon dioxide (CO₂) separation processes, which involve an alternating flow of gases and liquids in adsorbent-coated microchannels, have been shown to yield superior and environmentally friendly performance than the existing processes. This technique begins by sending the impure gas mixture through hydrophobic silicalite adsorbent-coated microchannels, which results in the adsorption of CO₂. Subsequently, hot water heat transfer fluid (HTF) flows through the same channels, displaces the purified gas stream, heats the adsorbent, desorbs the CO₂, and removes that desorbed CO₂ from the channel. This stage is followed by cooling …

Qualitative Stereo Vision Using Distributed Extended Waltz Filtering, Ben Mathew

Theses and Dissertations

Stereo vision is a fundamental problem in computer vision, aimed at reconstructing three-dimensional scene structure from two or more two-dimensional images. Traditional stereo algorithms rely on quantitative disparity estimation, often constrained by calibration precision, lighting variations, and surface texture. In contrast, our proposed Qualitative Stereo Vision seeks to understand depth relationships and spatial configurations from multiple planar views through symbolic reasoning and constraint satisfaction, offering a more flexible and cognitively plausible approach to scene interpretation.

This dissertation presents a novel framework called Distributed Extended Waltz Filtering, designed to provide qualitative stereo vision, particularly in the presence of occlusions—a persistent challenge …

Diseño Visual, Identidad De Género Y Diversidad Cultural En La Animación Contemporánea: El Caso De Raya And The Last Dragon, Elisabet Fonts González

GDI. Revista de investigación de Género, Diseño e Innovación

En los últimos años, la animación ha evolucionado hacia representaciones más inclusivas de género y diversidad cultural. Raya and the Last Dragon (López Estrada & Hall, 2021) destaca como un caso significativo de esta transformación, integrando elementos visuales, narrativos y simbólicos que reconfiguran los arquetipos femeninos tradicionales. Este estudio adopta un enfoque cualitativo centrado en el análisis visual, narrativo y simbólico de los personajes Raya, Namaari y Sisu. Basándose en fuentes primarias del proceso creativo y marcos teóricos de la animación y los estudios de género (Furniss, 2017; Lauretis, 1987; Wells, 1998), presta especial atención al diseño de personajes, la …

Elena Asins Y Las Afueras Del Canon: Animación Computacional Y Resistencia, Maria Mar Garrido Román

GDI. Revista de investigación de Género, Diseño e Innovación

Este artículo examina las animaciones generadas por ordenador producidas por Elena Asins, analizando cómo su práctica artística moviliza el pensamiento lógico-matemático, la programación y la experimentación visual. A través de una revisión de su metodología, contexto de producción y resultados formales, el estudio explora la incorporación de procesos algorítmicos en su obra, que generan imágenes con extensión temporal y la consolidan como una figura clave en la historia del arte digital y la animación experimental en España.

La investigación se basa en el análisis de fuentes primarias y, con el objetivo de situar su producción en un marco internacional, establece …

Una Animación Propia. Discurso Emancipador Desde El Cine De Animación Independiente, Elisa Martínez, Damià Jordà

GDI. Revista de investigación de Género, Diseño e Innovación

Introducción: A pesar de la temprana incorporación de las mujeres a la industria de la animación, sus roles fueron históricamente relegados a labores mecánicas, limitando su capacidad de decisión creativa. Este artículo analiza cómo el cine de animación independiente del siglo XX funcionó como un espacio esencial para las directoras que buscaban un control artístico que permitiera desarrollar discursos emancipadores. Se parte de la hipótesis de que el circuito independiente propició que las animadoras desarrollaran técnicas y narrativas alternativas que rompieron con los cánones plásticos y los preceptos ideológicos dominantes en la industria. Metodología: Mediante una metodología cualitativa, …

Colaboración, Discurso Y Técnicas: La Resistencia Simbólica En El Sueño De La Sultana (Isabel Herguera, 2023), Nerea Cuenca-Orellana

GDI. Revista de investigación de Género, Diseño e Innovación

La película El sueño de la sultana (Isabel Herguera, 2023) reinterpreta el cuento utópico homónimo de Rokeya Sakhawat Hossain (1905) realizando una exploración visual que combina animación, archivo y testimonio. El presente trabajo propone un análisis de la obra desde cuatro puntos clave e interrelacionados: la autoría colaborativa y femenina, los discursos visuales, los lenguajes y técnicas, y las formas de resistencia simbólica con el objetivo principal de establecerla como un caso práctico de diseño feminista contemporáneo.

En primer lugar, se examina el proceso de creación de la película como práctica colaborativa transnacional, donde la animación se convierte en un …

Design Principles For Customer‑Engaging Digital Service Systems: An Action Research Study, Keng Siau, Xiaofeng Chen, Xin Tan

Research Collection School Of Computing and Information Systems

Digital services represent a business approach employed by organizations to operate in the digital environment. However, systematic development guidelines for developing quality digital service systems are lacking in the literature. The authors identified four general challenges for developing and implementing customer-engaging digital service systems (CEDSS). By employing the method of canonical action research in a digital service system project, they derived 10 design principles for developing high-quality CEDSS. They empirically evaluated the design principles in the development project and through follow-up focus group sessions. The design principles provide applicable and actionable guidelines for the development of CEDSS.

Component Model Development Of Heat Exchangers, Expanders, And Control Valves For Autonomous Cryogenics Plant Cool-Down, William Harris Buhrig Iv

Mechanical & Aerospace Engineering Theses & Dissertations

The traditional method of cryogenic plant cool-down involves having continuous on-call staff to head into the office at any time to modify the existing multi-layered PID control systems if the on-call staff member detects a significant deviation from the cool-down plan. This thesis aims to outline an effective method for modeling the structure of systems with performance characteristics that deviate from design requirements and from ideal inlet-outlet correspondence, enabling the adjustment and modification of existing control structures across all Thomas Jefferson National Accelerator Facility (JLab) cryogenic refrigeration plants. Analytical Modeling and Gaussian Process Regression (GPR) are applied to model the …

Short-Arc Angles-Only Initial Orbit Determination For Leo And Geo Objects Using A Genetic Algorithm, Joseph R. Piini

Master's Theses

An ever-growing interest in utilizing space for scientific, commercial, and defense applications has led to an exponential rise in orbital debris recent years. With this sharp increase in space objects comes a greatly increased risk of potential collisions, necessitating an increase in Space Situational Awareness. In order to best mitigate the risk of future collisions in an increasingly congested space environment, it is crucial to be able to accurately determine the orbits of these new objects for trajectory tracking. This process is initial orbit determination (IOD), and is especially difficult when only observation angles are available for short observation times. …

Dynamic Modeling And Simulation Of A Power Generation Steam Rankine Cycle For A Fluoride Salt-Cooled High-Temperature Reactor Nuclear Power Plant, William R. Ton

Master's Theses

Nuclear Fluoride Salt-Cooled High-Temperature Reactors (FHRs) have the potential to greatly improve nuclear technology in terms of safety and cost. By combining molten salt coolant technology from the Molten Salt Reactor (MSR) and TRISO fuel technology from the Very High Temperature Gas Reactor (VHTR), FHRs may operate at significantly lower pressures than Light Water Reactors (LWRs) and with a more robust fuel source that is excellent at containing fission products. However, as no FHR has been built, there are still many design questions to address. This thesis uses transient computer modeling and simulation to investigate how an FHR could potentially …

Real Time Markerless 3d Hand Tracking For Intuitive Robotic Arm Control, Dylan G. Featherson

Master's Theses

This thesis presents a real-time, markerless motion-capture system for intuitive control of a multi-degree-of-freedom robotic arm. Using two synchronized RGB cameras and stereo-vision triangulation, the system reconstructs the three-dimensional position of a user’s hand without the need for physical markers or wearable sensors. The reconstructed 3D coordinates are mapped directly to the end-effector position of the Quanser QArm, a four-degree-of-freedom educational manipulator. Developed entirely in Python, the system integrates stereo camera calibration, 3D hand tracking with MediaPipe, coordinate transformation, and inverse kinematics into a unified real-time control pipeline operating at approximately 200 Hz. Calibration is performed through a checkerboard-based stereo …

Analyzing Patterns In Hofstede’S Cultural Dimensions Towards Individual Ai Receptiveness For Affective Experiences, Maggie Yang

Master's Theses

The use of artificial intelligence (AI) has significantly advanced efficient decision-making, with trust in algorithmic decisions shown to vary by cultural upbringing [1]. As AI becomes increasingly embedded in everyday life, it is essential to examine how cultural values affect trust in AI in subjective contexts that extend beyond purely quantitative analysis, like the personal interpretation of art. This work utilizes Hofstede’s cultural dimensions to investigate potential patterns in receptiveness towards AI predictions during art interpretation, providing insight into individual susceptibility to bias in AI-assisted affective analysis.

The study leveraged a cultural dimension survey and a custom Java program connected …

Origami-Inspired Pneumatic Soft Robotic Gripper, Conor J. Schott

Master's Theses

This thesis presents the design and evaluation of a vacuum-actuated, origami-based soft robotic gripper. A custom Sea Urchin crease pattern forms a lightweight folding skeleton that collapses radially under vacuum. The system emphasizes low cost and accessibility through laser cutting, 3D printing, and silicone molding. The Sea Urchin geometry was selected after digital and physical screening of candidate crease patterns for smooth folding, low strain concentration, and uniform inward motion. The folding skeleton is laser cut from 4 mil drafting film and folded into a compliant core. Four membrane configurations were developed: an origami gripper with a 36-inch balloon (Design …

Per- And Poly-Fluoroalkyl Substances Fate Across California Wastewater Treatment Plants: A Meta-Analysis Of Formation, Distribution, And Persistence, Elizabeth Reineke

Master's Theses

Per- and poly-fluoroalkyl substances (PFAS) are persistent contaminants that move through municipal and industrial wastewater systems with limited attenuation. As a result, they are increasingly detected in drinking water supplies. Despite growing regulatory concern, a systems-level understanding of PFAS behavior across multiple treatment facilities and watershed settings remains incomplete. This study compiled influent, effluent, and biosolids datasets from more than one hundred California wastewater treatment plants to evaluate PFAS occurrence, transformation, and partitioning across diverse treatment configurations. Analytical steps included calculating removal efficiencies, assessing precursor-to-product oxidation, evaluating co-contaminant correlations, and grouping facilities by process design to quantify configuration-specific fate patterns. …

Hallucination Techniques For Self-Supervised Synthetic Datasets For Mobile Robots, Wyatt D. Colburn

Master's Theses

Classical techniques in autonomous navigation struggle in tightly constrained spaces. Machine learning has been shown to perform better in these difficult environments but most techniques require large amounts of navigation experience for training. Using a new machine learning paradigm learning from hallucination (LfH), training data can be collected in a safe environment and not require supervision. Data is collected in real time while an agent performs a random walk in free space, supervision is not required as there are no obstacles for the robot to run into. After a random walk a post processing pipeline will hallucinate a safety corridor …

Human Identification And Action Recognition Using Small Data And Deep Domain Adaptation, Alexander M. Glandon

Electrical & Computer Engineering Theses & Dissertations

Human identification and human action recognition problems are two important research areas for real-world security and surveillance applications. In both human identification and action recognition, it is necessary to operate by collecting small datasets in the field, possibly in a short time window of observation. This dissertation studies and develops computational modeling and high-performance machine learning (ML) and deep learning (DL) models for human identification and human action recognition using small amounts of data. These methods and computational models may be useful for different security and surveillance applications.

This dissertation on human recognition develops a ML computational model to estimate …

Comparative Analysis Of Emergent Behaviors Of Three Drone Swarm System Models For Targeting Using Agent-Based Modeling And Simulation, Arsenio T. Gumahad Ii

Engineering Management & Systems Engineering Theses & Dissertations

This dissertation introduces a novel computational simulation framework for evaluating the emergent behaviors of three swarm drone models using Agent-Based Modeling and Simulation (ABMS). The three swarm models are a Leader-Follower swarm model based on Bruckstein's antline theory, a Flocking model based on a simplified Reynolds 'Boids’ model, and a Stigmergic model with pheromone-based coordination. The primary objective of the simulation is to evaluate the performance of these models in delivering a user-defined number of drones of each type to a target area of interest in four separate scenarios, resulting in 50,000 separate simulation trials. Each scenario was structured to …

Investigation Of Laser Based Flow Diagnostics With Metastable Argon, Sterling S. Gordon

Physics Theses & Dissertations

The overarching motivation of this work is the development of seedless, non-intrusive, laser-based diagnostics for supersonic airflow in wind tunnels. To advance this goal, this dissertation fo-cuses on three-photon excitation in a research-grade argon beam within a tabletop vacuum system, which offers a controlled environment for testing and refining the approach. The chosen excitation scheme drives argon atoms to the 3d[5/2]₃ state using a pulsed Ti:Sapphire laser system, enabling time-of-flight (ToF) measurements on atoms that subsequently undergo a multi-step decay to the metastable 4s[3/2]₂ state. Although full realization of this excitation scheme was hindered by technical …