Engineering Commons^™

Vision-Based Multimodal Frameworks For Human Behavioral Analysis: Applications In Group Activity Understanding And Public Health, Naga Venkata Sai Raviteja Chappa

Graduate Theses and Dissertations

Group Activity Recognition (GAR) has emerged as a crucial problem in computer vision, with wide-ranging applications in sports analysis, video surveillance, and social scene understanding. Unlike traditional action recognition focused on individuals, GAR requires understanding complex spatiotemporal relationships between multiple actors, their interactions, and the broader context in which these activities occur. This complexity introduces unique challenges, including the need for accurate actor localization, modeling of inter-actor dependencies, and understanding of temporal evolution in group behaviors. While recent advances have shown promise, existing approaches often rely heavily on extensive annotations such as ground-truth bounding boxes and action labels, creating significant …

Flexible Microelectrode-Based Impedance Immunosensor For Rapid Detection Of E. Coli O157:H7, Sonatan Kumar Biswas

Graduate Theses and Dissertations

Abstract Food contamination poses a significant threat to public health, the economy, and human health worldwide, occurring at any stage of the food supply chain, from farm to fork. Escherichia coli 0157:H7, recognized as one of the principal causes of foodborne illness, poses a considerable risk to food safety. The primary objective of this investigation is to devise a flexible microelectrode-based immunosensor capable of swiftly identifying E. coli O157:H7 cells without the need for incubation in a pure culture environment. In the development of the biosensor, the gold electrode (composed of 50% Au) underwent an initial coating process involving 2-aminoethanethiol/cysteamine, …

Wind-Induced Gravel Blow-Off: Experimental Investigations And Predictive Modeling For Resilient Roof Design, Md Safwan Ahsanullah

All Dissertations

Roof gravel blow-off during severe windstorms is a major hazard, leading to roof damage and significant downwind impacts. Understanding the initiation mechanisms for gravel blow-off is critical for improving building design and mitigating windborne debris risks. Existing experimental data on the wind speed required to initiate gravel blow-off have been collected from high-speed, full-scale tests at wind tunnels. While these tests form the basis of current design guidelines, they are expensive and can lack generalizability. As a result, rooftop gravel is frequently blown off at wind speeds below the design thresholds. This dissertation investigates the onset of rooftop gravel motion, …

User Acceptance Of Shared Autonomous Vehicles, Haotian Su

All Dissertations

A dissertation is proposed to explore user acceptance of shared autonomous vehicles (SAVs). SAVs are facing limited user acceptance. To systematically tackle the user acceptance barriers of SAVs, the main problem can be disintegrated into two sub-problems of user acceptance of autonomous vehicles (AVs) and ridesharing. The comfort of the ride experience in AVs is a determinant of user acceptance. Understanding the influential factors and developing methodologies to quantify human comfort in AVs are essential to facilitating future research to improve human comfort in AVs. The current pooled rideshare (PR) service closely resembles the anticipated future of SAVs. Understanding why …

Understanding The Role Of Ligamentous Constraint In Trapeziometacarpal Pathomechanics, Lizzie Walker

All Dissertations

The trapeziometacarpal (TMC) joint is the most common site for osteoarthritis (OA) in the upper limb. This joint is characterized by its wide range of motion and limited bony stability, making it susceptible to OA. The TMC joint relies mostly on ligaments and muscles for its static and dynamic stability, respectively. While importance of both volar and dorsal capsular TMC stabilizers has been demonstrated, the role of TMC ligamentous tissues in the development of thumb basal joint OA remains unclear.

The goal of this work was to identify morphometric and mechanical changes in key TMC ligament stabilizers, including the volar …

Grid Forming Inverters For Microgrid Operation Enhancement, Jan Westman

All Dissertations

Modern electric power systems are confronted with several major challenges including the increasing frequency and severity of weather events, aging infrastructure, high material costs, cyber-attacks, and substantial delays in global supply chains. Microgrids provide a solution to these challenges by insulating customers from the power outages occurring in their local distribution system. A microgrid is a small independent power system with its own power generation and energy storage resources that can supply customers’ electricity needs. When an outage occurs, a circuit breaker will disconnect the microgrid from the distribution system. Successful operation of the microgrid requires one or more devices …

The Effects Of Cigarette Smoke Extract On Osteoarthritis In A Primary Joint Tissue Explant Model, Emily Sawvell

All Dissertations

Osteoarthritis (OA) is the most common degenerative joint disease in the world with an economic burden of nearly $140 billion annually. Factors identified to increase the risk of developing OA include age, obesity, sex, race, genetics, and previous joint injury. However, one risk factor that has been scarcely studied in OA etiology is cigarette smoking. While some studies have reported smoking to protect against OA, increasing evidence suggests that cigarette smoking results in more severe and painful OA, increases the rate of developing OA, and reduces the efficacy of pain medications and arthritis-targeting therapies. Despite this, the impact of cigarette …

Understanding Dimensional Stability Of Polymer Surgical Mesh, Simeon J. Mckelvey

All Dissertations

Polymer surgical mesh is a biomedical implant that has revolutionized the repair of the abdominal wall and pelvic floor. Each year, over 1.6 million Americans undergo surgical procedures using polymer surgical mesh to treat conditions where internal organs protrude through weakened tissues. This material is used in approximately 90% of hernia repairs, 80% of stress urinary incontinence procedures, and 30% of pelvic organ prolapse surgeries.

Despite this widespread use of polymer surgical mesh, post-implantation complications have prompted regulatory investigation and scrutiny. These complications stem from the mesh's behavior within the human body, including wrinkling, contraction, and loss of fixation, which …

Real-Time Active Thermal Management And Degradation Forecasting Of Power Electronics Building Blocks In All-Electric Ships, Ali Moghassemi

All Dissertations

With advancements in semiconductor technology, power electronic devices play a critical role in modern power systems, enabling efficient energy conversion in applications such as renewable energy integration, electric vehicle drives, industrial automation, and Navy ship power systems. However, the increasing use of power converters presents challenges such as harmonic reduction, cost optimization, reliability improvement, and thermal management, especially in weight- and space-constrained environments like wind turbines and shipboard systems. High-frequency switching, while reducing passive filter size, increases thermal stress on semiconductor devices, impacting efficiency and longevity. Active thermal control, which regulates junction temperature through power loss management, and degradation forecasting, …

Ceramic Membrane Evaluation Via Automated Filtration Systems For Water Treatment And Resource Recovery, Weiming Qi

All Dissertations

Membranes are an advanced and mature water and wastewater treatment technology. Membrane fouling is a key difficulty for all membrane filtration processes, leading to significant attention in the literature over the years. A common problem in laboratory-scale membrane research is that the testing methods in the laboratory are often quite different than industrial applications due to the limitations of manual experimental setups. An automated membrane filtration apparatus was built in the lab to solve this problem by allowing long-term filtration, frequent backwash and CIP, and high-accuracy operation. The filtration system achieves different cleaning strategies for both theoretical research and practical …

Decomposition And Coordination For Multiobjective Optimization: A Framework And Methodology, Philip J. De Castro

All Dissertations

In this work, we consider finding Pareto efficient solutions for complex multiobjective optimization problems (MOPs). Complex MOPs are unique in the literature because they have many more objective functions than is typically considered. In fact, such complex MOPs will have 30+ objective functions. This large problem size presents computational and coginitive difficulties. Computationally, standard techniques for solving MOPs are often ineffective and cognitively it is difficult for a decision maker (DM) to handle all of the information provided in such a large problem. To address these challenges, we develop a decomposition and coordination framework. This framework will allow us to …

Integrating Artificial Intelligence For Transportation Cyber-Physical Systems: From Detection To Cyber Resilience, Reek Majumder

All Dissertations

This dissertation investigates different methods for methane detection using unmanned aerial vehicles (UAVs). The author addresses the fundamental problem of methane emissions, a potent greenhouse gas responsible for global warming. The first part of the dissertation aims to create a cost-effective system for real-time methane detection and intensity prediction using ensemble learning models trained on meteorological parameters. The ensemble learning-based classification models show a high accuracy for methane detection.

The second part of the dissertation investigates cyberattack detection for UAVs using a graph-based intrusion detection system (IDS) for controller area networks (CAN). This lightweight, protocol-independent IDS uses graph-based machine learning …

User Acceptance Of Shared Autonomous Vehicles, Haotian Su

All Dissertations

A dissertation is proposed to explore user acceptance of shared autonomous vehicles (SAVs). SAVs are facing limited user acceptance. To systematically tackle the user acceptance barriers of SAVs, the main problem can be disintegrated into two sub-problems of user acceptance of autonomous vehicles (AVs) and ridesharing. The comfort of the ride experience in AVs is a determinant of user acceptance. Understanding the influential factors and developing methodologies to quantify human comfort in AVs are essential to facilitating future research to improve human comfort in AVs. The current pooled rideshare (PR) service closely resembles the anticipated future of SAVs. Understanding why …

Advanced Day-Ahead Scheduling Of Hvac Demand Response Control Using Novel Strategy Of Q-Learning, Model Predictive Control, And Input Convex Neural Networks, Rahman Heidarykiany, Cristinel Ababei

Electrical and Computer Engineering Faculty Research and Publications

In this paper, we present a Q-Learning optimization algorithm for smart home HVAC systems. The proposed algorithm combines new convex deep neural network models with model predictive control (MPC) techniques. More specifically, new input convex long short-term memory (ICLSTM) models are employed to predict dynamic states in an MPC optimal control technique integrated within a Q-Learning reinforcement learning (RL) algorithm to further improve the learned temporal behaviors of nonlinear HVAC systems. As a novel RL approach, the proposed algorithm generates day-ahead HVAC demand response (DR) signals in smart homes that optimally reduce and/or shift peak energy usage, reduce electricity costs, …

Integrating Blockchain Technology Into Telemedicine: A Framework For Enhancing Data Privacy And Security, Harsha Sammangi, Aditya Jagatha, Jun Liu

Research & Publications

This paper presents a blockchain-based framework designed to enhance data privacy, integrity, and security in telemedicine systems. The proposed architecture employs distributed ledger technology to ensure transparency, traceability, and immutability of patient data exchanges among healthcare providers. Smart contracts automate access permissions and auditing processes, reducing the risks of unauthorized data sharing. The study evaluates the framework’s performance in secure data handling, highlighting blockchain’s role in fostering patient trust and resilience against cyberattacks in remote healthcare environments.

Decentralized Multi-Hop Federated Reinforcement Learning For Energy-Efficient And Secure Routing In Lorawan-Based Smart City Infrastructure, Harsha Sammangi, Aditya Jagatha, Jun Liu

Research & Publications

This paper proposes a decentralized hybrid framework that integrates Federated Learning (FL) and Reinforcement Learning (RL) to enable energy-efficient and secure multi-hop routing in LoRaWAN-based smart city networks. The method allows local model training at gateways and relay nodes, combining real-time routing decisions with privacy-preserving federated aggregation. Key metrics such as residual energy, link quality, and node trust levels are embedded into the reward function, and lightweight encryption plus differential privacy safeguard routing metadata. Simulation results demonstrate substantial gains in packet-delivery ratio, latency, network lifetime and resilience to adversarial attacks when compared to traditional routing protocols.

Optimization-Based Distributed Controller For Multi-Agents System In Microgrid Secondary Control, Fahad S. Alshammari, Ayman El-Refaie, Saleh Alyahya, Sheroz Khan

Electrical and Computer Engineering Faculty Research and Publications

Micro-grids function to connect to power system power produced by the renewable energy resources. In islanded micro-grids, grid-forming units collaborate to maintain the micro-grids voltage and frequency by utilizing droop control technique that includes primary, secondary and tertiary levels. Secondary control intervenes to improve power sharing and restore voltage and frequency to their nominal levels. However, the conventional droop control applied to a grid with mismatched line parameters experiences a trade-off between reactive power sharing and voltage regulations. This paper applies real-time trajectory tracking convex optimization to ensure by communicating power sharing between units in a consensus topology. The optimization …

Computationally Guided Liquid Crystal-Based Competitive Binding Sensing Platform For Optical Detection Of Spike Protein, Homa Ghaiedi, Shubham Pandey, Sophia Ezendu, Tibor Szilvasi, Karthik Nayani

Chemical Engineering Faculty Publications and Presentations

A liquid crystal (LC)-based sensing platform for the rapid optical detection of SARS-CoV-2 ' s spike protein's receptor binding domain (RBD) domain is introduced. This platform utilizes a thermotropic LC, hosted on metal-cation decorated substrates, onto which the spike protein can competitively bind. Density functional theory (DFT) calculations guide the experiments that reveal a homeotropic-to-planar transition in the LCs upon exposure to SARS-CoV-2 spike-decorated yeast, providing a basis for sensitive virus detection. The sensor's reversibility/specificity is confirmed through antibody-induced orientation recovery of the LCs initial orientation. Strikingly, the sensor can detect approximate to 2000 copies of the spike protein per …

Influence Of Boundary Conditions And Blood Rheology On Indices Of Wall Shear Stress From Ivus-Based Patient-Specific Stented Coronary Artery Simulations, R. Patrick Mccarthy, Peter J. Mason, David S. Marks, John F. Ladisa Jr.

Biomedical Engineering Faculty Research and Publications

The long-term clinical efficacy of coronary stents is limited by restenosis. Coronary stenting results in altered arterial geometry, local blood flow patterns, and wall shear stress (WSS), all of which can influence restenosis. Computational fluid dynamics (CFD) simulations employ assumptions about blood properties and boundary conditions, which also influence WSS alterations from stenting. Our objective was to evaluate three common assumptions applied with stented coronary artery CFD simulations (inlet velocity profile, outlet boundary conditions, and viscosity) to provide insight for future studies. A patient-specific right coronary artery was reconstructed from intravascular ultrasound and computed tomography imaging. Time-averaged WSS (TAWSS) and …

Locked Dimerized Cxcl12 Exerts Radiosensitizing Effects In Head And Neck Cancer, Oscar Villarreal Espinosa, Musaddiq Awan, Abdullah A. Memon, Anne Frei, Jamie Foeckler, Rachel Kuehn, Jennifer Bruening, Becky Massey, Stuart J. Wong, Monica Shukla, Julia Kasprzak, Amit Joshi, Michael B. Dwinell, Heather A. Himburg, Joseph Zenga

Biomedical Engineering Faculty Research and Publications

Background

Head and neck squamous cell carcinoma (HNSCC) presents significant treatment challenges, particularly in cases unrelated to human papillomavirus (HPV). The chemokine receptor CXCR4, interacting with its ligand CXCL12, plays a crucial role in tumor proliferation, metastasis, and treatment resistance. This study explores the therapeutic potential of engineered monomeric and dimerized CXCL12 variants (CXCL121 and CXCL122, respectively) in HNSCC and evaluates potential additive effects when combined with radiation therapy.

Methods

Clinical HNSCC biopsies were evaluated for CXCR4 expression in both previously untreated and radiorecurrent disease. HNSCC cell lines were then treated with combinations of CXCL12 variants and radiotherapy and interrogated …

Involvement Of Long Non-Coding Rna (Lncrna) Malat1 In Shear Stress Regulated Adipocyte Differentiation, Justin Caron, Marjan Ghanbariabdolmaleki, Madison Marino, Chong Qiu, Bo Wang, Michael Mak, Shue Wang

Biomedical Engineering Faculty Research and Publications

Adipocyte differentiation plays an important role in bone remodeling due to secretory factors that can directly modulate osteoblast and osteoclast, thus affecting overall bone mass and skeletal integrity. Excessive adipocyte differentiation within the bone marrow microenvironment can lead to decreased bone mass, eventually causing osteoporosis. The mechanical microenvironment of bone marrow, including fluid shear, maintains the balance of adipocyte and osteoblast differentiation during bone remodeling. However, how mechanical cues interact with long noncoding RNA (lncRNA) and regulate adipocyte differentiation remains unexplored. In this study, we investigated the mechanosensitive role of lncRNA MALAT1 during mesenchymal stem cells (MSCs) adipocyte differentiation. By …

The Little Diagram That Could: Geometric Properties And Statistical Applications Of Persistence Diagrams In Topological Data Analysis, Eugene Kler

McKelvey School of Engineering Graduate Student Theses & Dissertations

Topological Data Analysis (TDA) is a collection of techniques for data analysis that leverages topological invariants of spaces formed from data points. These methods excel at extracting useful information from noisy or sparse data, making them attractive to many mathematicians, statisticians, and scientists. In this thesis, we explore TDA on three fronts: algebraic foundations, statistical applications, and metric properties. Throughout, the central object of study is the Persistence Diagram (PD), a summary of the changes in homology that occur as one builds simplicial complexes from the data by increasing a parameter.

A Neuroimmune Circuit Mediates Chemo Brain Pathology, Daniel Ahmadi

McKelvey School of Engineering Graduate Student Theses & Dissertations

Chemotherapeutic agents, while effective in targeting malignant tumors, often reduce the patients’ quality of life by inducing fatigue, pain, and motivational deficits. These symptoms are collectively referred to as “chemo brain.” The mechanisms underlying these adverse effects, and specifically whether fatigue and motivational impairments share a common etiology, remain poorly understood. The neural–immune substrates of these symptoms remain obscure, in part because standard preclinical regimens either bypass key systemic signals or introduce local toxicity confounds. Here, I establish and validate a three‑day, low‑dose intravenous cisplatin protocol that avoids peritoneal inflammation and severe renal injury yet produces robust, reversible fatigue and …

Influence Of Terrain Model Resolution On Rockfall Dispersion And Tortuosity Of Rockfall Paths, Lucas Jason Arsenith

Boise State University Theses and Dissertations

The geology of the Snake River Plain region of southwestern Idaho contains terraces formed from downcutting of the Boise River and columnar jointed basalt cliffs from lava flows. Within the city limits of Boise, Idaho, rockfall events originate from these columnar jointed basalt cliffs. Whitney Terrace, a rockfall-prone location in southwestern Boise, was chosen as the study site. Site-specific LiDAR data was used to create a bare earth terrain model, and rockfall boulders were geolocated and measured to be used as inputs into rockfall models. The slope below the cliff face was divided into four distinct slope zones, each with …

Development And Application Of Computational Tools For Organic Molecular Structure Prediction From Small Molecule Crystal Structure Determination To Polymer Persistence Length, Madilyn E. Paul

Boise State University Theses and Dissertations

This dissertation utilized two areas of computational simulations for organic molecular structure prediction. First, we investigate the possible polymorphism of both barbituric acid dihydrate (BTADH) and violuric acid monohydrate (VAMH) using density functional theory. Crystalline structures that exhibit polymorphism have an increased level of uncertainty in predicting their chemical and physical properties. BTADH was previously thought to undergo a subtle phase transition from P2₁/n to planar Pnma at 217 K. We conclude that barbituric acid dihydrate exhibits crystalline disorder in which the molecules are crystallized in a non-merohedrally twinned P2₁/n configuration below …

Reproducible Infrastructure For Modeling Thermoplastic Polymer Fusion Welding, Chris D. Jones

Boise State University Theses and Dissertations

Aircraft materials must balance the demands of being light-weight and fuel efficient with being safe, durable, and strong. Carbon-fiber reinforced polymer composites are able to meet both of these requirements, and as a result, they are being utilized more and more in aircraft manufacturing. Thermoset polymers are typically used as the matrix material in these composites; however, thermoset polymers require long curing times in large autoclave ovens in order to form chemical cross-links, which once present, cannot be melted upon further heating. As a result, joining smaller thermoset composite parts together to build larger structures requires using mechanical fasteners, which …

Empirical Models For The Prediction Of Lattice Constants In Perovskite Materials, Bryan Wright

Boise State University Theses and Dissertations

Perovskites are a class of materials famous for their many functional properties and are envisioned as a material that will pave the way for scientific advancement in the fields of renewable energy, high tech sensors, lasers, catalysis, computer chips, and many others. This wide variety of applications is not the result of a single fantastic property of perovskite materials but rather stems from the perovskite structure’s ability to display a host of functional properties. One area where there is room for significant improvement is in the rate of perovskite discovery. The high stability of the perovskite structure is responsible for …

Kinetic Growth Rate Analysis Of Coelastrella Sp. In Aquaculture Wastewater., Rob Skarvan

Master of Engineering Theses

The demand for sustainable food and energy production continues to rapidly rise. Utilizing aquaculture wastewater as microalgae growth medium is a potential opportunity for nutrient recycling and industrial symbiosis, but more research is required to understand how best to design and scale-up a dual-purpose facility. This study investigates the growth of Coelastrella sp. in aquaculture wastewater compared to industry-standard growth medium BG-11 and modified tap water as controls. Though cell size and pigment density varied throughout media, aquaculture wastewater performed very comparably to BG-11 as a microalgae culture broth.

The Monod equation can model Coelastrella sp. growth based …

Minimizing Secondary Spinal Cord Injuries With Hypertonic Saline., Francisco A. Cortez-Thomas

Master of Engineering Theses

Spinal cord injury (SCI) disrupts white matter, causing periaxonal swelling, axonal degeneration, and impaired function. To examine vascular edema’s role, we developed a 3Dprinted dual-compartment imaging chamber to mimic and manipulate interstitial and vascular fluid dynamics in real time. We hypothesized that hypertonic saline (HTS) in the "vascular" chamber would osmotically shift fluid from the periaxonal space and preserve myelinated fibers after SCI. Using two-photon excitation microscopy, we imaged myelin and axons ex vivo in Thy1^YFP+ transgenic mice following C5 contusive SCI and assessed three clinically relevant HTS concentrations versus normal saline for their effectiveness in mitigating periaxonal swelling …

Selecting Green Wall Adoption Best Solutions Using Optimization: Addressing Barriers And Maximizing Benefits, Samar Nadeem

Theses and Dissertations

This research explores the potential of green walls as a sustainable solution to mitigate urban challenges and align with global climate change objectives. Despite their ecological and social benefits, green wall implementation faces significant barriers, hindering their adoption. Consequently, this study aims to develop a comprehensive framework to identify the obstacles, propose feasible solutions, and provide actionable strategies for promoting green walls. This framework incorporates an optimization model specifically designed for government-led solutions, evaluating their feasibility based on administrative feasibility, community acceptance, technical feasibility, industrial acceptance, and long-term adoption potential. By quantifying and prioritizing solutions based on their cost, feasibility, …