Engineering Commons^™

Stability Of Holes In Granular Raft, Plabon Kumar Saha

All Theses

A granular raft at an oil–water interface exhibits unique mechanical properties, including the ability to form and sustain stable holes. In this study, we experimentally investigate the formation, stability, and collapse dynamics of holes in particle rafts composed of micrometer-sized particles. Holes are created using a hollow cylinder, which generates a meniscus that inhibits particle motion, thus stabilizing the hole. Stable holes are formed when their size reaches a critical value, which depends upon the capillary length. The critical hole size does not depend upon the circularity of the hole. We show that capillary forces due to the presence of …

Resurrecting Mslrp The Diagnosing, Documentation, And Demonstration Of Miniaturized Sequential Liquid Lignin Recovery And Purification, Robert Booth Whiting Lowery Jr

All Theses

A pilot plant designed for the Sequential Recovery and Purification of Liquid Lignin was downsized to perform optimization and minor adjustments at a reasonable time and operational cost. Multiple failed runs proved the need for a redesign, and an analysis was performed to solve the newly discovered scaling issues.

Operators identified several common failure points of the mSLRP and theorized several methods to rectify them. This included a rework of both procedural elements, the physical construction of the pilot plant, and the actual code and control of the pilot plant’s operating system, LabVIEW.

Runs were attempted, and eventually, the corrective …

Micro Wind Turbine - Modelling And Testing, Mohammad Uzair Bhati

All Theses

The global energy demand continues to rise as people consume more electricity to power their personal electronics, electric vehicles, and consumer products such as outdoor tools. To generate renewable energy, large scale solar and wind farms continue to receive the most commercial attention. However, portable wind energy turbines have the potential to generate sufficient power for cell phones and other electronic devices. There are two types of wind turbines, horizontal and vertical axis each having their pros and cons. Vertical-axis wind turbines are the main focus of this thesis, with a reduction in their form factor or size and portable …

Modality Distillation Using A Sam-Guided Multimodal Teacher For Unimodal Wildfire Segmentation And Temperature Prediction, Michael N. Marinaccio

All Theses

Wildfires are one of the world’s most devastating natural disasters that affect the environment, communities, and more critically, humans that live in and around those communities. Due to the threat of large-scale destruction in landscapes and human inhabited areas, it has become increasingly more important to develop wildfire detection, management, and suppression strategies to mitigate and prevent these negative outcomes. Wildfire research encompasses many different areas. Most notably, the development of communication, navigation, remote sensing, and monitoring systems. In wildfire monitoring, limitations discovered in-ground and satellite observation have shifted the focus toward Unmanned Aerial Vehicle (UAV) based wildfire research, which …

Tradespace Exploration With Statistical Modeling Techniques And Immersive Visual Representation In Virtual Environments, Nikhil Raj

All Theses

Statistical modeling techniques combined with virtual reality (VR) visualization offer powerful new approaches to tradespace exploration in engineering design. The research presented addresses the challenge of analyzing and communicating insights from complex multidimensional datasets, particularly for autonomous ground vehicle systems.

Beginning with a review of statistical methods—including Principal Component Analysis (PCA), Analysis of Variance (ANOVA), and correlation analysis—the study examines their applications in tradespace exploration. Building on this foundation, three distinct visualization pathways connecting MATLAB data to virtual environments are developed and evaluated: VRML representation, STL conversion, and Blender integration. Each approach is assessed for its ability to maintain data …

An Experimental And Computational Study Of High-Temperature Creep Behavior In Fully Lamellar Titanium Aluminide Alloys, Karel M. Ziminsky

All Theses

Titanium aluminide alloys have seen increased aerospace applications in recent years, especially in aircraft jet engines. They can offer benefits such as improved high-temperature strength compared to titanium alloys and reduced density compared to nickel alloys. These alloys also can exhibit high creep resistance due to their fully lamellar microstructure. These mechanical properties are desirable for components like turbine blades, where tight tolerances must be maintained for optimal performance. This research examines the high-temperature creep behavior of a fully lamellar two-phase titanium aluminide alloy, TNM® (Ti-43.5Al-4Nb-1Mo-0.1B), through experimental and computational methods. Scanning electron microscopy studies reveal the presence of large …

Investigation Of Plm Utilities And Concepts In Engineering Curriculum: Challenges And Opportunities, Frederick Rowell

All Theses

The implementation of Product Lifecycle Management (PLM) tools and concepts in engineering education has gained increasing significance as manufacturing and engineering industry shifts towards digital engineering workflows to enhance collaboration, efficiency, and innovation. Despite its typical application in engineering industries, many mechanical engineering programs have not integrated PLM software into their curriculums. The Product Lifecycle Management Center (PLMC) at Clemson University offers PLM workshops and research opportunities to students. Despite these initiatives, PLM education remains largely extracurricular and is not fully incorporated into required coursework within the mechanical engineering curriculum. The objective of this thesis is to explore the role …

Tsunamigenesis On A Buoyant Granular Layer As A Model Of Ice Mélange In Ice-Choked Fjords, Nathan F. Reyner

All Theses

Glacial calving events can often create destructive tsunami waves in ice-choked fjords in the arctic region, posing a threat to local inhabitants and damaging coastlines. Here the sea is covered by a polydisperse granular material called ice mélange, whose properties can affect the wave characteristics. To investigate the role of a buoyant granular layer, as a model of ice mélange, on tsunami generation, or tsunamigenesis, a series of laboratory experiments were conducted by collapsing a column of dense granular material into a body of water with a layer of buoyant particles distributed across the liquid surface. Experiments were performed over …

Privacy Implications Of Data Collection In Android Automotive Os, Bulut Gözübüyük

All Theses

Modern vehicles have become sophisticated computational and sensor systems, as evidenced by advanced driver assistance systems (ADAS), in-car infotainment, and autonomous driving capabilities. They collect and process vast amounts of data through various onboard subsystems. One significant player in this landscape is Android Automotive OS (AAOS), which has been integrated into over 100 million vehicles and has become a dominant force in the in-vehicle infotainment (IVI) market. With this extensive data collection, privacy concerns have become increasingly crucial. The volume of data gathered by these systems raises questions about how this information is stored, used, and protected, making privacy a …

Implications Of Biourbanism On Sustainable Business Strategy, Samuel Walsh

Graduate Theses - Engineering Management

Recently developed for urban planners to view cities through the lens of ecosystems and other complex natural systems, the Biourbanism model is a set of metrics to numerically assess the resilience and sustainability of urban systems. This model focuses on ten factors of urban sustainability, which include categories such as energy, infrastructure, and technology, and is intended to help cities achieve more holistic measures of their ability to realize resilience and sustainability goals. The premise of this Integrated Project is that businesses can also be viewed as complex natural systems. Hence, this project examines case studies to show how implementing …

Computer Vision In Soccer: Yolov11 Analytics Engine For Quantifying Game Strategy, Connor S. Maurer

Data Science Undergraduate Honors Theses

Single-shot object detection capabilities significantly reduce computational overhead for real-time computer vision in sports analytics at 60 FPS. YOLO11’s lightweight CNN gives promising accuracy while meeting the low-latency demand of dynamic soccer matches. As data-driven approaches take over the sport of soccer, efficient player tracking systems become critical for informing coach’s strategies. I prototype the ETL (Extract, Transform, Load) process of data collected from a single- shot detection program and evaluate its viability for estimating player fatigue. YOLO11 detects players, the ball, and other characteristics, with the output transformed by homography to estimate the positions in the real world. These …

Connecting Biological Engineering Education With Hands-On Internship Experience, Lindsey Bush

Biological and Agricultural Engineering Undergraduate Honors Theses

My honors thesis examines how my time in the biological engineering program and internship experience have prepared me for my future career. It highlights the skills I developed, the lessons I learned, and how these experiences shaped my job search and career decisions.

In my thesis, I share details about my internship. I described what I worked on, the places I visited, and the hands-on experience I gained. I talk about how my coursework provided a strong foundation and how my internship allowed me to apply those concepts in real-world engineering settings. I also discuss the technical and professional skills …

The Trials And Tribulations Of Building An Ebike From Recycled Parts, Olivia Conrady

Senior Honors Projects

The United States is far from being “walkable” in most suburban areas. Though public transportation has grown in its infrastructure in some large cities, it is far from sufficient. As a result of this, millions of people drive their cars every single day -- a practice that is unsustainable and becoming an increasingly evident issue. One possible solution that has become popular is the use of electric bicycles, since they are less physically taxing than a normal bike and allow for quicker transport. Though electric bicycles have been on the rise, they are still well outside of many people’s budget, …

De Novo Design Of Ablative Polymers For Aerospace Thermal Protection Systems Through An Integrated Ai-Theory-Experiment Approach, Rene Damaso Boisseau

Open Access Theses & Dissertations

Novolac phenolic resin (NPR) is a widely used polymeric ablative material (PAM) for thermal protection systems (TPS) due to its high thermal decomposition temperature (TD, 500â?¯Â°C) and char yield (YC, 55â?¯wt%). However, its drawbacks (including high thermal conductivity, low mechanical properties and water uptake) prompt the need for improved PAMs. This study explores the pyrolysis behavior and char-forming capabilities of NPR and a potential alternative PAM, poly(1,6-dimethyl phenol) (PPO), through both theoretical and experimental approaches. A graph neural network (GNN) was developed to predict structure-property relationships, revealing that benzyl group positioning and oxygen atom placement significantly influence YC. PPO's para-positioned …

Bim Assessment For State Departments Of Transportation, Francisco Israel Guillen

Open Access Theses & Dissertations

Building Information Modeling (BIM) has been used by the Architecture, Engineering, and Construction (AEC) industry to enhance the efficiency and quality of work across various stages, including planning, design, construction, and operation and maintenance (OM) of projects. Despite widespread adoption in vertical construction, BIM implementation in infrastructure projects is still falling behind. This disparity can be attributed to several factors, including the complexity and scale of infrastructure projects and varying levels of BIM adoption and integration within organizations. Efforts to standardize BIM practices and enhance the digital capabilities of infrastructure projects are essential to bridge this gap and ensure the …

Charging Infrastructure Needs For Electric Trucks In Texas, Katerina Jilkova

Open Access Theses & Dissertations

This thesis focuses on the design of a methodology for determining the optimal location of charging stations for heavy-duty electric trucks. The work focuses primarily on long-distance trips that require charging the truck battery outside cities, where the range of charging stations is not extensive. In addition to design the algorithm, the thesis also focuses on implementing the algorithm on a specific case - the implementation of charging stations in the I-10 Freeway corridor between El Paso and San Antonio. The output of the work is not only a description of the procedure, but also an application to a real …

Towards Mitigation Of The Light Network Load Performance Penalty Of The Network Link Outlier Factor (Nlof), Jaime Merin Guzman

Open Access Theses & Dissertations

Detecting and localizing faults in communication networks is critical to maintaining reliable and efficient network operations. The Network Link Outlier Factor with Most Likely Link (NLOF: MLL) algorithm has demonstrated its potential to automate this task but suffers from significant performance degradation under low network load conditions, where limited network flow data reduces its ability to localize faults. This thesis proposes and evaluates the performance of a synthetic traffic generation algorithm to be used with NLOF:MLL. This algorithm strategically injects synthetic flows that supplement the insufficient real network flows, thereby improving NLOF:MLL's performance under low-load conditions. Specifically, we select network …

Engineering Affinity Of Yth Protein To M6a-Rna, Katelynn E. Horvath

Honors Scholar Theses

Engineered RNA-binding proteins (RBPs) show promise for diverse applications in research and therapeutic development. Modulating the interaction between YTH-domain containing proteins and methylated RNA ligands could result in a high affinity, highly specific binding protein for the advancement of research tools in neurodegenerative disease. N6-methyladenosine (m6A) modified RNA contributes to stress granule formation that promotes neurotoxicity in neurodegenerative disease, with concentrations of m6A-RNA increased fivefold in Alzheimer’s Disease. Further affinity maturation of the YTH-m6A interaction through directed evolution of the YTH domain could produce a novel protein with increased affinity better suited for the development of biological detection tools or …

Signal Modeling Of High Purity Germanium Detectors, Brooke Parker Thibodeau

Honors Scholar Theses

Pulse shape analysis can be used to analyze radiation incident on a semiconductor diode detector. Finite element analysis (FEA) can be used to simulate high purity germanium detectors with user-specified geometry, impurity concentration, and bias voltage. Subsequent streamline calculation can be used to conduct pulse shape analysis for single and multiple site gamma-ray interactions within the detector volume. Cross sections of the detector can be visualized by contour plots of the electric field, drift velocity magnitude, and collection time, as well as t30 and t90 rise-time values.

Cooperative And Bifunctional Ga-Ca-Cr2o3@Cao Structured Monoliths As Versatile Platform For Reactive Capture Of Co2 And Its Subsequent Conversion To Ethylene, Khaled Baamran, Ali A. Rownaghi

Chemical and Biochemical Engineering Faculty Research & Creative Works

Cooperative and bifunctional materials (BFMs) that integrate adsorbents and catalysts offer a promising strategy for the reactive capture of CO₂ to produce valuable fuels and chemicals. In this study, we developed structured BFMs via 3D printing that combine CaO as an adsorbent with Ga–Ca–Cr₂O₃ metal oxides as the catalyst for the reactive capture of CO₂ and its subsequent conversion to C₂H₄ via the oxidative dehydrogenation of C₂H₆ (CO₂-ODHE). Three different Ga–Ca compositions were used to modify the catalyst surface characteristics and enhance C₂H₄ selectivity. …

Assessing Sleep Quality In A Preclinical Model Of Low Back Pain Through Novel Noninvasive Methods, Lydia C. Saltz

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

Chronic low back pain (LBP) has widespread negative impacts on quality of life. Current treatments for chronic LBP fail to provide long-term efficacy and motivate the need to understand key drivers of poor patient outcomes. Mounting evidence indicates that sleep disturbances and chronic LBP have a strong reciprocal relationship. Women may be particularly vulnerable to the negative impacts of the sleep-pain axis, exhibiting greater prevalence in both conditions. However, the relationship between sleep, pain, and sex remains understudied. Preclinical models can be used to parse out characteristic sleep features that degrade with pain, which can be further broken out by …

A Comprehensive Analysis Of Virtual Reality In Modern Healthcare Education, Adarsha Ganesan

Honors Program: Senior Projects (Public)

This thesis evaluates the effectiveness of virtual reality (VR) in healthcare education through multiple facets of evaluation: educational outcomes, accessibility considerations, and financial viability. Drawing from an extensive literature review on existing research and a case study of the University of Nebraska Medical Center (UNMC) College of Nursing's "Journey Through the Kidney" VR experience, this analysis examines how technology can transform modern medical education. While research shows mixed results regarding virtual reality’s impact on assessment outcomes, studies demonstrate increased student motivation and engagement, which can have lasting downstream effects on the quality of learning. Accessibility analysis reveals both opportunities and …

Efficacy Of Mitophagy Inhibition As A Potentiating Agent For Conventional Chemotherapy, Morghan Relich, Shelby Bess

Biomedical Engineering Undergraduate Honors Theses

Cancer is a result of uncontrolled growth and reproduction of cells. Damaged or abnormal cells grow and multiply when they should not and in turn the cells continue to proliferate and metastasize. Malignant cells rely on functional mitochondria for proliferation, metastasis, and survival. These mitochondria maintain a functional mitochondrial network through a quality control mechanism called mitophagy. Mitophagy is a conserved intracellular process to maintain quality control and remove damaged mitochondria.

Previous research has been done to examine the effects of mitophagy in tumor cells, as well as the effects of mitophagy inhibition. One focus of current research has been …

Advancing Efficiency Of Unstructured Mesh Processing With Localized Data Structures, Guoxi Liu

All Dissertations

Unstructured meshes are widely used to represent complex shapes and data in visualization tasks, such as medical imaging, engineering design, and geometric modeling. However, their unevenly distributed elements make them memory-intensive and time-consuming to process, especially as mesh sizes grow. This research focuses on improving the efficiency of processing large unstructured meshes by reducing memory usage and speeding up computations. This doctoral dissertation introduces three methods to address these challenges. The first approach divides the mesh into smaller partitions and processes it piece-by-piece, reducing memory requirements by up to 10 times. The second approach uses the processor's parallel computing capabilities …

Metabolic Responses Of Adipose-Derived Stem Cells In Collagen I Hydrogels, Caroline R. King

Biological Sciences Undergraduate Honors Theses

Peripheral nerve injury affects approximately 44 in 1 million people in the United States every year and can lead to incomplete nerve recovery and loss of motor and sensory function. A significant amount of energy is required for nerve injury repair. A lack of energy allocation to the injury site hinders repair. Current treatments include hollow nerve guidance conduits, decellularized nerve grafts, and autografts. However, they are limited by factors such as donor site morbidity and sustained immunosuppressive treatments. Using three-dimensional collagen I hydrogels laden with adipose-derived stem cells (ASCs) can assist in neural regeneration. Three-dimensional collagen scaffolds aim to …

Investigating The Feasibility Of Developing A Fully Solar-Driven Combined Cycle Design, Mazdak Gorji

LSU New Orleans Theses and Dissertations

This study explores the feasibility of a thermal solar-only combined cycle power plant, a concept rarely investigated despite its potential to outperform photovoltaic systems in energy efficiency. Unlike typical hybrid models that use solar energy as a supplement to fuel, this research focuses on a solar-only system that operates a true Brayton-Rankine combined cycle for continuous 24/7 power generation. The study established an efficiency benchmark, comparing eighteen solar generation scenarios across different storage and power block configurations to assess whether the concept was worth pursuing, which it proved to be. Following this, the research focused on simulation, validating ThermoFlex software …

Effects Of Mississippi River Borrow Area Design On Riverine Sediment Transport Using Delft 3d, Kiara B. Horton

LSU New Orleans Theses and Dissertations

This research uses a Delft3D model to investigate the impacts of Mississippi River borrow areas on the Mississippi River navigation channel. The largest navigation concerns for the Mississippi River are operation and maintenance costs down; this includes costs of transportation and dredging. Borrow areas are created to supplement beneficial use of dredge material in various projects. Borrow areas are designed to a standard set of guidelines, according to Coastal Protection and Restoration authority (CPRA), and consider impacts to the navigation channel by requiring and minimum distance from the navigation channel. This study models the total sediment transport and amount of …

Precooling Ventilation Air For Hospital Operating Rooms And The Affects On Terminal Box Reheat, Joel F. Luke Jr

LSU New Orleans Theses and Dissertations

This study evaluates the impact of climate on the energy performance of two HVAC system configurations—AL1, a conventional air handling system, and AL2, which incorporates a pre-cooling coil and discharge air temperature (DAT) reset strategy. Using EnergyPlus simulations, each system was modeled across multiple U.S. cities representing a wide range of climate zones. Results show that AL2 significantly reduces plant energy consumption, with an average energy savings of 66.61\% compared to AL1. These savings were nearly evenly split between reductions in heating and cooling demands.

A weather normalization analysis using cooling and heating degree days (CDD65 and HDD65) revealed a …

A Laboratory Study Of Local Scour And Driftwood Effects At A Type A Piano Key Weir, Manisha Panthi

All Graduate Theses and Dissertations, Fall 2023 to Present

Piano key weirs are a unique weir designed to increase the amount of flow that passes over it via its zig-zag shape (similar to the rectangular shape of keys of a piano). With its relatively small footprint, they are becoming more popular to upgrade existing water management projects and are also being used in new construction works. However, there is little information available regarding how these weirs handle sediment and driftwood. Additional information will help researchers and designers to understand the challenges of upstream sediment buildup, driftwood accumulation, and the effects of floods on downstream scour with viable protection measures. …

Irrigation Performance Connection To Water Quality In Big Creek, Sena Bildim

All Graduate Theses and Dissertations, Fall 2023 to Present

Due to new technologies and improved water management strategies, sprinkler irrigation systems are becoming more common in Utah and nearby areas. These systems are generally thought to be more efficient, but their effects on water quality are not well understood. This study focuses on the Big Creek watershed, which flows into Bear Lake—an area where water quality concerns are increasing.

The purpose of this research was to explore how different irrigation systems—sprinkler and surface—affect both water use and water quality. Field tests were conducted to measure how evenly water was applied and how efficient each system was. Water and soil …