Engineering Commons^™

An Integrated Pcb-Based Heating And Auto-Ranging Platform For Volatile Organic Compound (Voc) Detection Using Carbon Nanotube Based Sensors, Thomas Kalach

USF Tampa Graduate Theses and Dissertations

This thesis presents the development, characterization, and integration of a novel low-cost, high-dynamic-range sensor platform for the detection of volatile organic compounds (VOCs), leveraging the unique electrical properties of carbon nanotube (CNT) thin films. The platform introduces a fully integrated auto-ranging analog front-end circuit capable of real-time resistance measurement spanning over eight orders of magnitude ranging from tens of ohms to hundreds of megaohms, without compromising signal resolution or precision. This was achieved through a digitally controlled, multi-path feedback architecture and controllable current source.

To further enhance sensor performance, the system incorporates a copper trace heater beneath the sensor array, …

10.13.2025 Ored Connect, Liz Williamson

ORED Newsletter

• ORED Small Grants Program RFP
• Mississippi Impact Grants RFP
• Contest to Promote Lab Practices
• Field Fest
• AAAS Membership for Faculty, Staff, and Students 

Assessing Riparian Evapotranspiration Dynamics In A Water Conflict Region In Nebraska, Usa, Ivo Z. Gonçalves, Burdette Barker, Christopher M. U. Neale, Derrel L. Martin, Sammy Z. Akasheh

Civil and Environmental Engineering Faculty Publications

The escalating pressure on water resources in agricultural regions has become a catalyst for water conflicts. The adoption of innovative approaches to estimate actual evapotranspiration (ETa) offers potential solutions to mitigate conflicts related to water usage. This research presents the application of a remote sensing-based methodology for estimating actual evapotranspiration (ETa) based on a two-source energy balance model (TSEB) for riparian vegetation in Nebraska, US using the Spatial EvapoTranspiration Modeling Interface (SETMI). Estimated results through SETMI and field data using the eddy covariance system (EC) considering the period 2008–2013 were used to validate the energy balance components and ETa. Modeled …

Calving As A Source Of Acute And Persistent Kinetic Energy To Enhance Submarine Melting Of Tidewater Glaciers, M. F. Shaya, J. D. Nash, E. C. Pettit, J. M. Amundson, R. H. Jackson, D. A. Sutherland, Dylan Winters

Electrical and Computer Engineering Faculty Publications and Presentations

Calving icebergs at tidewater glaciers release large amounts of potential energy. This energy—in principle—could be a source for submarine melting, which scales with near‐terminus water temperature and velocity. Because near‐terminus currents are challenging to observe or predict, submarine melt remains a key uncertainty in projecting tidewater glacier retreat and sea level rise. Here, we study one submarine calving event at Xeitl Sít’ (LeConte Glacier), Alaska, to explore the effect of calving on ice melt, using a suite of autonomously deployed instruments beneath, around, and downstream of the calving iceberg. Our measurements captured flows exceeding 5 m/s and demonstrate how potential …

Empirical Methods For Support System Design In Deep Serpentinite Excavations: A Critical Evaluation, Anas Driouch, Redouane Oubah, Abdelaziz Lahmili, Latifa Ouadif

Journal of Sustainable Mining

Underground mining excavations in fragile serpentinite rock masses represent a significant challenge today. The complicated features of these rock formations, especially at great depths, make it difficult to classify them using commonly employed methods. This paper focuses on the application of empirical methods for the classification of serpentinite rock masses and the design of support systems in underground mining excavations. Specifically, it concerns an access tunnel excavated entirely in serpentinite at a depth of 460 m. Geomechanical classification systems indicate that the Tunnelling Quality Index (Q-system) and Rock Mass Rating (RMR) evaluate serpentinites as rock masses of exceptionally poor to …

Improved Streamflow Forecasting Through Swe-Augmented Spatio-Temporal Graph Neural Networks, Akhila Akkala, Soukaina Filali Boubrahimi, Shah Muhammad Hamdi, Pouya Hosseinzadeh, Ayman Nassar

Computer Science Student Research

Streamflow forecasting in snowmelt-dominated basins is essential for water resource planning, flood mitigation, and ecological sustainability. This study presents a comparative evaluation of statistical, machine learning (Random Forest), and deep learning models (Long Short-Term Memory (LSTM), Gated Recurrent Unit (GRU), and Spatio-Temporal Graph Neural Network (STGNN)) using 30 years of data from 20 monitoring stations across the Upper Colorado River Basin (UCRB). We assess the impact of integrating meteorological variables—particularly, the Snow Water Equivalent (SWE)—and spatial dependencies on predictive performance. Among all models, the Spatio-Temporal Graph Neural Network (STGNN) achieved the highest accuracy, with a Nash–Sutcliffe Efficiency (NSE) of 0.84 …

Chplx: The Hpx Solution For Bridging Chapel And C++, Shreyas Swanand Atre

LSU Master's Theses

Historically, domain scientists faced steep learning curves due to low-level programming models and fragmented tooling. Between 2003 and 2008, Cray, now part of HPE, introduced the Chapel language as part of DARPA’s High Productivity Computing Systems (HPCS) program. Today, Chapel remains under active development and is used across research and production projects. In parallel, the STE||AR Group has advanced C++-based parallel programming through HPX, a standards-conforming runtime that provides lightweight tasking, futures, and distributed execution while abstracting much of the algorithmic “heavy lifting.” Yet for many domain scientists, C++ presents a steeper learning curve than Chapel. To close this complexity …

Evaluation Of Different Design Standards For The Design Of Axial Loaded Concrete Filled Steel Tube Columns Under Fire, Ebtsam Youssef Ibrahim Abd El Ghaffar, Nabil Said Mahmoud, Fikry A. Salem, Mohammed. M. Ghannam

Mansoura Engineering Journal

This paper compares various codes and standards for the behavior of “Concrete-Filled Steel Tubes” (CFST) columns under fire and axial load. The codes evaluated include European standards (EC4.2 and EC3.2), the American standard (AISC 360), and the Australian standard (AS/NZS 2327). The fire resistance of Concrete-Filled Steel Tubular (CFST) and steel hollow (SH) columns was assessed using a computer program developed with Visual Studio .NET. The program's results were compared with previous experimental data to evaluate the accuracy of various codes and standards in predicting the behavior of these columns under fire conditions. This study highlights the importance of selecting …

Performance Analysis Of Power System Dynamic Stability Of The Nigerian 330kv Transmission Network, Charles Evuarherhe Ikeyin, Benjamin Olabisi Akinloye

Al-Bahir

Nigeria's power sector faces persistent challenges, including dynamic instability, poor voltage regulation, and frequent grid collapses, primarily driven by reactive power deficits and transmission distances exceeding 200 km in northern regions. To bridge critical research gaps, this study employs a rigorous, multi-method approach through comprehensive EMTP-RV (Electromagnetic Transients Program) analysis of Nigeria’s 330kV 52-bus grid, PV curve-based vulnerability indexing to identify cascade-critical buses, and a novel Cost-benefit Pareto framework for optimal capacitor placement. Methodology was validated against IEEE (Institute of Electrical and Electronics Engineers) 14-bus benchmarks. Validated against IEEE 14-bus benchmarks, simulations revealed severe voltage instability in northern …

Evaluation Of An In Situ Forming Composite Hydrogel Based On Gelatin–Sodium Alginate– Polyethylene Oxide For Biomedical Applications: Effect Of Incorporated Sophora Japonica On Hydrogel Performance, Samar A. Salim

Nanotechnology Research Centre

Hydrogels are ideal candidates for biomedical applications such as wound healing, tissue engineering, and bone regeneration due to their porosity and similarity to the extracellular matrix of humans. A gelatin/ sodium alginate (SA) hydrogel with the inclusion of polyethylene oxide (PEO) was utilized to achieve enhanced mechanical strength. Hydrogels were prepared at different ratios of polymer solutions to select the hydrogel that exhibited an optimal gelation time. Sophora japonica, a plant leaf extract (SJLE) rich in flavonoids and isoflavonoids, was added to the hydrogel to enhance tissue repair. The developed hydrogels were extensively characterized for their morphology, porosity, and swelling …

Sensing The Pulse Of A Data Stream In Real Time, Vishnu S. Pendyala

Open Educational Resources

In an era where data never sleeps, streaming algorithms offer a powerful toolkit for extracting meaningful insights from high-velocity data flows. This talk explores some foundational techniques that enable efficient, real-time analytics with minimal memory requirements. The algorithms covered include a clever bit-based strategy for approximating the count of 1s in a sliding window, ideal for binary streams where space efficiency is paramount. Another algorithm helps estimate statistical moments (mean, variance, skewness) using compact sketches, enabling a deeper understanding of stream distributions without storing the entire dataset. One other algorithm identifies trending items with exponential decay, giving more weight to …

Microstructural Evolution And Magnetic Properties Of Spark Plasma Sintered Smco5 And Smco5-Fe Composites, Farhan Ishrak, Michael Lastovich, Fu-Yun Tsai, Charles Perkins Iv, Henri Baldino, Alex Helmer, Sean Rego, Sanoj Karki, Daniel Hedlund, Rajeev Gupta, Tushar Borkar

Mechanical Engineering Faculty Publications

Optimizing SmCo(5-)based nanocomposites for high-temperature magnetic applications requires balancing coercivity and saturation magnetization, properties often compromised by grain coarsening, oxidation, and secondary phase formation during conventional sintering. This study investigates the microstructural evolution and magnetic properties of SmCo5 and SmCo5-Fe composites processed via high-energy ball milling followed by spark plasma sintering at 900 degrees C and 1000 degrees C, a route designed to retain the nanostructure while enabling rapid densification compared to conventional sintering. A suite of characterization techniques, including electron microscopy, X-ray diffraction, magnetometry, Magneto-optical Kerr effect, and magnetic force microscopy, reveals the extent of consolidation, phase composition, and …

Incorporating The Influence Of Vehicle Mix On Crash Frequency And Severity, Shahrior Pervaz, Manmohan Joshi, Tanmoy Bhowmik, Dewan Ashraful Parvez, Kai Wang, John N. Ivan, Naveen Eluru

Civil and Environmental Engineering Faculty Publications and Presentations

The current approaches for crash frequency and severity prediction in the Highway Safety Manual (HSM) do not employ vehicle mix information. In this research effort, we build advanced alternatives to HSM methods while incorporating vehicle mix information. Two model systems—(a) multivariate Poisson-lognormal model and (b) negative binomial-ordered probit fractional split model—are estimated by incorporating vehicle mix variables. The developed model systems can also capture the influence of observed and unobserved heterogeneity of different independent variables including vehicle mix variables. We estimate the models for three facility types including Urban Arterial 4-Lane Divided segments, Rural 3-Leg STOP-Controlled and Rural 4-Leg STOP-Controlled …

Day-Night Shifts In Water-Soluble Ions Of Size-Resolved Aerosols Before And After The Covid-19 Lockdown In A Coastal Megacity: Metro Manila, Philippines, Grace Betito, Paola Angela Bañaga, Rachel A. Braun, Maria Obiminda Cambaliza, Melliza Templonuevo Cruz, Alexander B. Macdonald, James Bernard Simpas, Connor Stahl, Armin Sooroshian

SOSE Affiliate: Manila Observatory

The COVID-19 pandemic-driven lockdowns offer a unique opportunity to examine how reductions in anthropogenic emissions impacted atmospheric aerosol composition in urban environments. This study investigates the day-night variability of size-resolved water-soluble ions in ambient particulate matter (PM) collected in Metro Manila before (November 2019–February 2020) and after (November 2020–February 2021) lockdown implementation. Using tandem Micro-Orifice Uniform Deposit Impactors (MOUDIs), aerosol samples were collected during daytime (06:00–18:00) and nighttime (18:00–06:00) periods and analyzed for key ionic species (sulfate, ammonium, nitrate, oxalate, sodium, chloride, calcium, and magnesium) via ion chromatography. Submicrometer water-soluble mass declined post-lockdown, particularly during daytime, reflecting suppressed secondary formation …

Resilience Oriented Distribution System Service Restoration Considering Overhead Power Lines Affected By Hurricanes, Kehkashan Fatima, Hussain Shareef, Flavio Costa

Michigan Tech Publications

In recent years, there has been an increase in the frequency of severe weather events (like hurricanes). These events are responsible for most power outages in power distribution systems (PDSs). Particularly susceptible to storms are overhead PDSs. In this study, the dynamic Bayesian network (DBN)-based failure model was developed for different hurricane scenarios to predict the line failure of overhead lines. Based on the outcomes of the DBN model, a service restoration model was formulated to maximize restored loads and minimize power losses using Particle Swarm Optimization (PSO)-based distributed generation (DG) integration and system reconfiguration. Three different case studies based …

Using Serial Open Circuit Potentiometry To Study Ce And Gd Deposition In Molten Licl-Kcl Eutectic, Ranon G. Fuller, Guy L. Fredrickson, Devin Rappleye

Faculty Publications

The ability to electrochemically separate individual species in a pyrochemical reprocessing salt relies on first being able to detect a separation in their reaction potentials. This requires the ability to measure reaction potentials with extreme precision. In this work, we introduce a novel technique called serial open circuit potentiometry (SOCP) and demonstrate its effectiveness at precisely measuring metal deposition reaction potentials. SOCP has several advantages over traditional open circuit potentiometry, including its abilities to quantify the error of measured equilibrium potentials by averaging many individual OCP measurements, determine overpotential deposition nucleation potentials to instrument precision, and simultaneously determine the nucleation …

Stainless-Steel Piano Key Weir, Y. Fournié, H. Tralli, J. Alendé, S. Erpicum

4th International Workshop on Labyrinth and Piano Key Weirs

The spillway of the Oule dam (Pyrénées, France) was successfully modified and uprated in 2018. Its discharge capacity has been increased in accordance with the updated hydrological analysis and French regulations. In order to achieve a significant increase of the total discharge capacity, the dam operator (Société Hydroélectrique du Midi - ENGIE) has re-designed the whole spillway. A 1 m high type-A piano key weir solution was selected and implemented to replace the existing ogee crest. This solution is unique since it is made of stainless steel, precast, transported by helicopter on site and assembled by bolting. This paper focuses …

High Altitude Labyrinth Design And Construction, Nick Miller, Margaret Provencher, Eric Holmstead

4th International Workshop on Labyrinth and Piano Key Weirs

GEI worked with a Colorado district to design and construct a labyrinth spillway at a high-altitude reservoir west of Denver. The labyrinth spillway increased the reservoir normal water surface elevation 10 feet, increasing reservoir storage capacity by 120 acre-feet. This additional storage was achieved with the labyrinth with minimal modification to the existing embankment dam. The site presented challenges including significant ice loading on the weir structure, complex rock conditions requiring seepage control measures, and unique construction techniques.

A labyrinth weir configuration was chosen to increase discharge capacity with minimal adjustment to the existing spillway footprint and to pass the …

Nachtigal Dam: A 4917 M Long Labyrinth Spillway, F. Laugier, Denis Magnan, B. Blancher, Arnaud Chapius, Thibaut Guillemot, Sebastien Erpicum

4th International Workshop on Labyrinth and Piano Key Weirs

The Nachtigal Dam, part of the Nachtigal Amont Hydropower Project in Cameroon, features a 4917-meter-long labyrinth spillway, designed to safely manage floodwaters. This spillway was optimized for hydraulic safety, cost efficiency, and environmental considerations. Physical scale modeling (at a relatively rare 1:12.5 scale) and detailed design adjustments ensured robust performance under various flow conditions. Despite construction challenges for such a large-scale nonlinear structure, the project achieved reliable spillway operations, demonstrating the suitability of labyrinth weirs for large-scale hydraulic infrastructure.

World Register Of Piano Key Weirs, Sebastien Erpicum, Tohid Jamali Rovesht, Brian M. Crookston, Pierre Archambeau

4th International Workshop on Labyrinth and Piano Key Weirs

Piano Key Weirs have been proposed in 2003. Since then, more than 40 projects have been commissioned over the world. This presentation details a world register of piano key weir prototypes, freely available online. It also analyses the main characteristics of these structures in operation to highlight trends in design.

Value Added 3d Modeling – Lower Crow Dam Spillway Modification And Rehabilitation Project, Justin Bartels

4th International Workshop on Labyrinth and Piano Key Weirs

The Confederated Salish and Kootenai Tribes (CSKT) have been operating Lower Crow Dam under restricted reservoir levels since 2008 due to significant structural and spillway capacity deficiencies that have increased risk to dam safety. Stantec was contracted by the CSKT to evaluate rehabilitation options and provide final design for the new spillway. The focus of this paper is to describe the design methodology and spillway selection process with an emphasis on the hydraulic modeling completed to support the final spillway arrangement. The design approach included the evaluation of various spillway types including gated, Obermeyer, fuse gate, ogee, labyrinth, and piano …

Design Approach For Labyrinth Weir: Case Study Of La Laye Dam, M. Roy, S. Derrien, J. Schaguene, G. Dautois

4th International Workshop on Labyrinth and Piano Key Weirs

This paper presents ARTELIA’s gradual approach for the design and construction of labyrinth weirs, from the preliminary concept design to the commissioning. It is illustrated with the case of La Laye dam, where an additional lateral spillway with labyrinth weir has been developed to increase the existing discharge capacity. The design process involved preliminary hydraulic calculations, 3D numerical modeling and a physical scale model. The paper elaborates on the technical solutions and optimizations which were considered to provide the Client with the most hydro-economical solution.

Advances In Arced Labyrinth Weir Research And Application At The Springton Spillway Project, Seth Thompson, Blake Tullis, Brian M. Crookston

4th International Workshop on Labyrinth and Piano Key Weirs

Arced labyrinth weirs, characterized by a curved cycle orientation, can enhance discharge efficiency compared to linear labyrinth weirs by taking advantage of the approaching flow field in reservoirs. This paper summarizes some of the Utah State University arced labyrinth weir hydraulic efficiency research findings, including sidewall and cycle arc angle influences, nappe aeration, and local submergence. Recent CFD modeling that replicates some of the experimental findings is also highlighted, demonstrating CFD utility for design. The Springton Spillway project, owned by Aqua Pennsylvania, leveraged this research when designing a two-stage, eight-cycle arced labyrinth weir to replace an aging ogee crest spillway …

Piano Key Weir With Orifice Sluice, Dau Xuan Thuy

4th International Workshop on Labyrinth and Piano Key Weirs

In recent years, many Piano Key Weirs (PKW) have been built around the world. In Vietnam there are more than 18 PKWs in operation to the present. However, during the operation, some experience has been drawn on the design and application conditions. This paper is about the Dak Mi 3 reservoir with a PKW that operated well for more than 4 years until an exceptional flood following typhoons in October 2020, making reservoir fully filled with mud and sand. The result is the PKW became ineffective and the hydropower plant unable to operate. In order to dredge the reservoir and …

Honey, I Shrunk The Pk Weir: A Case Study Of Burton Pond Dam, David Bisio

4th International Workshop on Labyrinth and Piano Key Weirs

Between a low-head tidal environment, razor-thin hydraulic margins, and a long list of site restrictions, the Burton Pond Dam Rehabilitation project offered the chance to pursue a one-of-a-kind solution: a miniature stainless steel piano key weir as part of a new mixed active-passive spillway. This case study will explore how established hydraulic designs were modified specifically for the site and verified with computational flow dynamics; how the innovative cantilevered geometry was analyzed structurally with finite element modeling; and how detailing, fabrication and constructability were considered throughout the design process. From conceptual-level design submissions to the final construction walkthrough, the whole …

Research And Application Of Piano Key Weirs In Vietnam (2025), M. Ho Ta Khanh, Dau Xuan Thuy

4th International Workshop on Labyrinth and Piano Key Weirs

Since the Piano Key Weirs (PKW) were introduced by F. Lempérière and A. Ouamane (2003) many such structures have been built for irrigation, hydroelectricity and water regulation due to their outstanding efficiency. In Vietnam, PKWs have also attracted significant attention. There have been several laboratory hydraulic model studies to test the discharge capacity, flow characteristics, and energy dissipation downstream the spillway. Vietnam had also issued PKW design standard for easy of application in 2018. This paper describes shortly 18 Piano Key Weirs in operation in Vietnam (among other existing PKWs) : Dak Mi 4B, Dak Mi 3, Dak Rong 3, …

Lessons Learned From The Hydraulic Design Of The Prado Dam Labyrinth Spillway, Yajayra Diaz, Mike Phillips, Brian M. Crookston, Julie D. Allen

4th International Workshop on Labyrinth and Piano Key Weirs

The U.S. Army Corps of Engineers has completed the design of a new labyrinth weir spillway at Prado Dam, in southern California. The proposed labyrinth weir would consist of an arced configuration, 7-cycles, with varying weir wall height from 28 ft to 41 ft with upstream head over the weir cycles of up to 30 ft. This paper highlights the key lessons learned from the hydraulic design of the new labyrinth weir, including significant fluctuating negative pressures at the weir wall resulting in hydrodynamic loads that should be considered during structural design and submergence of the weir at high heads.

Synthetically Expressive: Evaluating Gesture And Voice For Emotion And Empathy In Vr And 2d Scenarios, Haoyang Du, Kiran Chhatre, Christopher Peters, Brian Keegan, Rachel Mcdonnell, Cathy Ennis

Conference papers

The creation of virtual humans increasingly leverages automated synthesis of speech and gestures, enabling expressive, adaptable agents that effectively engage users. However, the independent development of voice and gesture generation technologies, alongside the growing popularity of virtual reality (VR), presents significant questions about the integration of these signals and their ability to convey emotional detail in immersive environments. In this paper, we evaluate the influence of real and synthetic gestures and speech, alongside varying levels of immersion (VR vs. 2D displays) and emotional contexts (positive, neutral, negative) on user perceptions. We investigate how immersion affects the perceived match between gestures …

Investigation Of Flow Field Near A Type-A Piano Key Weir, S. Hussain, M. S. Quamar, Z. Ahmad

4th International Workshop on Labyrinth and Piano Key Weirs

Piano Key Weirs (PKWs) enhance spillway capacity and induce complex flow patterns around their inlet and outlet keys. This study investigates the flow near a Type-A PKW using Computational Fluid Dynamics (CFD). Velocity fields in the vicinity of the PKW keys were analyzed for different discharges and validated with the experimental results. As flow approaches the inlet key, the streamwise, vertical, and lateral velocity components increase significantly, with the highest velocities near the inlet key. However, near the outlet key the streamwise velocity decreases while the vertical and lateral components increase. For all the discharges, the maximum velocity was observed …

Key Width Ratio Influence On Discharge Coefficients Of Trapezoidal Piano Key Weirs Via Openfoam Simulations, Lisa Lüddecke, Mario Oertel

4th International Workshop on Labyrinth and Piano Key Weirs

Piano key weirs are characterized by complex three-dimensional flow structures with multiple parameters describing their geometry. The variation of these parameters can affect several flow characteristics such as efficiency, energy dissipation and air entrainment. Identifying the optimal geometry for enhanced hydraulic performance represents a significant challenge. Physical or numerical modeling of multiple geometric variants is necessary to identify the relevant optimal parameters. The key width ratio (between an inlet and an outlet key) represents one of the parameters that influences the hydraulic behavior of the piano key weir. In particular, it affects the discharge coefficient, which in turn affects the …