Engineering Commons^™

Improveing F-Beta Score In Classifying Shark Data Into Shark Behaviors, Ibrahim M. Ali

CGU Theses & Dissertations

One metric used to measure classification performance in machine learning is F-beta score. The objective in this thesis is to improve the average F-b score computed in classifying shark data into shark behaviors, namely; Resting, Swimming, Feeding, and Non-Directed Motion (NDM). Synthetic Minority Oversampling Technique (SMOTE) and Adaptive Synthetic Sampling (ADASYN) are utilized to balance the data, from which pre-processed Fast Fourier Transform (FFT), Walsh-Hadamard Transform (WHT), and Autocorrelation (AC) features are extracted then classified using Convolutional Neural Network (CNN) and K-Nearest Neighbors (K-NN). All the combinations of the two balancing techniques, the three feature types, and the two machine …

Mechanisms Of Dendritic Shorting In Lithium Metal Batteries With Li7la3zr2o12 Solid Electrolytes, Lukas Karapin-Springorum

Pomona Senior Theses

Energy storage will play a crucial role in efforts to mitigate the effects of climate change caused by greenhouse gas emissions from human activity. Lithium metal batteries using solid electrolytes like Li₇La₃Zr₂O₁₂ have higher energy density than lithium-ion batteries, which may enable a more rapid and complete electrification of transportation. However, lithium metal batteries suffer from undesirable short-circuiting when metallic lithium deposits connect the two electrodes. It has been debated whether these lithium dendrites generally grow directionally from the anode or are generated by the reduction of lithium ions inside the solid electrolyte, …

An Impedance Tube Technique For Estimating The Insertion Loss Of Earplugs, K. Carillo, O. Doutres, F. Sgard

Études primaires

This paper proposes a quick and straightforward technique for estimating the insertion loss (IL) of earplugs measured on an acoustical test fixture (ATF) using a commercial impedance tube. In this method, the earplug's acoustic properties (i.e., its transmission loss and the reflection coefficient of its medial surface) are determined from its transfer matrix measured using the three-microphones impedance tube method modified here for the current application. The IL is then estimated using a one-dimensional analytical model of open and occluded earcanals based on the wavefield decomposition theory. The method is evaluated numerically and experimentally from 50 Hz to 6.5 kHz. …

Developing A Model To Predict Bleeding Areas In Asphalt Pavements Using Artificial Neural Network, Rami Khalifah, Mena I. Souliman, Pratik Lama, Omar Elbagalati

Civil Engineering Faculty Publications and Presentations

Bleeding can have a negative effect on the performance of a pavement, as the layer of asphalt on the surface can become slippery, reduce skid resistance, and lead to premature wear and tear. Therefore, predicting the bleeding area in asphalt pavements will help in maintaining better pavements, increasing the safety of the drivers, and delivering timely maintenance. The aim of the study is to develop a model using a highly sophisticated analysis tool called an artificial neural network (ANN) to predict the bleeding areas in asphalt pavements as output, with one hidden layer and several neurons and using several independent …

Eevmc: An Energy Efficient Virtual Machine Consolidation Approach For Cloud Data Centers, Attique Ur Rehman, Songfeng Lu, Mubashir Ali, Florentin Smarandache, Sultan S. Alshamrani, Abdullah Alshehri, Farrukh Arslan

Branch Mathematics and Statistics Faculty and Staff Publications

The dynamic landscape of cloud computing design presents significant challenges regarding power consumption and quality of service (QoS). Virtual machine (VM) consolidation is essential for reducing power usage and enhancing QoS by relocating VMs between hosts. OpenStack Neat, a leading framework for VM consolidation, employs the Modified Best-Fit Decreasing (MBFD) VM placement technique, which faces issues related to energy consumption and QoS. To address these issues, we propose an Energy Efficient VM Consolidation (EEVMC) approach. Our method introduces a novel host selection criterion based on the incurred loss during VM placement to identify the most efficient host. For validation, we …

Bv2trs Appraiser Model: Enforcing Bharat Version2 In Tree Soft Modelling For Appraising E-Mobility Hurdles, Mona Mohamed, Florentin Smarandache, Michael Gr. Voskoglou

Branch Mathematics and Statistics Faculty and Staff Publications

Electric vehicles (EVs) are being introduced to lessen greenhouse gas (GHG) emissions, air pollution, and reliance on fossil fuels. As a result of the government's aggressive promotion of EVs and rising environmental consciousness, EVs are quickly rising to the top of the low-carbon transportation market. Several viewpoints suggested that shifting to electric vehicles has been seen as a potential way to achieve sustainable mobility. Nevertheless, many studies discussed the obstacles and hurdles that obstruct the embracing of various electric-mobility (E-mobility) as EVs and electric-scooters (E-scooters) as eco-friendly means. Herein, we discussed these hurdles and determined them through surveys for prior …

Automated Flood Depth Estimation On Roadways, Kwame Ampofo, Megan A. Witherow, Alex Glandon, Monibor Rahman, Ahmed Temtam, Mecit Cetin, Khan M. Iftekharuddin

Civil & Environmental Engineering Faculty Publications

Recurrent nuisance flooding is common across many parts of the globe and causes extensive challenges for drivers on the roadways. The prevailing monitoring methods for roadway flooding are costly and not automated or effective. The ubiquity of visual data from cameras and advancements in computing such as deep learning may offer cost-effective methods for automated flood depth estimation on roadways based on reference objects such as cars. However, flood depth estimation faces challenges due to the limited amount of data annotated with water levels and diverse scenes showing reference objects at various scales and perspectives. This study proposes a novel …

Methods That Support The Validation Of Agent-Based Models: An Overview And Discussion, Andrew Collins, Matthew Koehler, Christopher Lynch

Engineering Management & Systems Engineering Faculty Publications

Validation is the process of determining if a model adequately represents the system under study for the model’s intended purpose. Validation is a critical component in building the credibility of a simulation model with its end-users. Effectively conducting validation can be a daunting task for both novice and experienced simulation developers. Further compounding the difficult task of conducting validation is that there is no universally accepted approach for assessing a simulation. These challenges are particularly relevant to the paradigm of Agent-Based Modeling and Simulation (ABMS) because of the complexity found in these models’ mechanisms and in the real-world situations they …

Abmscore: A Heuristic Algorithm For Forming Strategic Coalitions In Agent-Based Simulation, Andrew J. Collins, Gayane Grigoryan

Engineering Management & Systems Engineering Faculty Publications

Integrating human behavior into agent-based models has been challenging due to its diversity. An example is strategic coalition formation, which occurs when an individual decides to collaborate with others because it strategically benefits them, thereby increasing the expected utility of the situation. An algorithm called ABMSCORE was developed to help model strategic coalition formation in agent-based models. The ABMSCORE algorithm employs hedonic games from cooperative game theory and has been applied to various situations, including refugee egress and smallholder farming cooperatives. This paper discusses ABMSCORE, including its mechanism, requirements, limitations, and application. To demonstrate the potential of ABMSCORE, a new …

B(C₆F₅)₃ Co-Catalyst Promotes Unconventional Halide Abstraction From Grubbs I To Enhance Reactivity And Limit Decomposition, Austin W. Medley, Diya Patel, Calvin Utne, Trandon A. Bender

Chemistry & Biochemistry Faculty Publications

Ruthenium based Grubbs metathesis has become a commonplace reaction for synthetic chemists. Development of new generations of catalysts evolving from Grubbs I (GI) have led to greater stability, functional group compatibility, and superior reactivities. However, these advancements lead to increased costs. To this end, we report here how the addition of the commercially available tris(pentafluorophenyl)borane Lewis acid, which has become a common place catalyst in its own right, leads to enhanced reactivity of GI. Moreover, the increased reactivity arises via halide abstraction rather than traditional phosphine dissociation, providing ring-opening metathesis polymerization products that are divergent from those synthesized without the …

Role Of Nitrogenous Functional Group Identity In Accelerating 1,2,3- Trichloropropane Degradation By Pyrogenic Carbonaceous Matter (Pcm) And Sulfide Using Pcm-Like Polymers, Han Cao, Jingdong Mao, Paul G. Tratnyek, Wenqing Xu

Chemistry & Biochemistry Faculty Publications

Groundwater contamination by 1,2,3-trichloropropane (TCP) poses a unique challenge due to its human toxicity and recalcitrance to degradation. Previous work suggests that nitrogenous functional groups of pyrogenic carbonaceous matter (PCM), such as biochar, are important in accelerating contaminant dechlorination by sulfide. However, the reaction mechanism is unclear due, in part, to PCM's structural complexity. Herein, PCM-like polymers (PLPs) with controlled placement of nitrogenous functional groups [i.e., quaternary ammonium (QA), pyridine, and pyridinium cations (py⁺)] were employed as model systems to investigate PCM-enhanced TCP degradation by sulfide. Our results suggest that both PLP-QA and PLP-py⁺ were highly effective …

Type-B Energetic Processes: Their Identification And Implications, James Weifu Lee

Chemistry & Biochemistry Faculty Publications

We have now identified two thermodynamically distinct types (A and B) of energetic processes naturally occurring on Earth. Type-A energy processes, such as classical heat engines, apparently well follow the second law of thermodynamics; Type-B energy processes, such as the newly discovered thermotrophic function that isothermally utilizes environmental heat energy to perform useful work in driving ATP synthesis, follow the first law of thermodynamics (conservation of mass and energy) but do not have to be constrained by the second law, owing to their special asymmetric functions. Several Type-B energy processes such as asymmetric function-gated isothermal electricity production and epicatalysis have …

Examining The Effectiveness Of Oiled Ballast Water Treatment Processes: Insights Into Hydrocarbon Oxidation Product Formation And Environmental Implications, Maxwell L. Harsha, Danielle E. Verna, Yanila Salas-Ortiz, Eduardo Osborn, Eduardo Turcios Valle, Aleksandar I. Goranov, Patrick G. Hatcher, Ana M. Aguilar-Islas, Patrick L. Tomco, David C. Podgorski

Chemistry & Biochemistry Faculty Publications

Ballast water released from ships into coastal environments has been identified as a mechanism that introduces contaminants of concern into coastal ecosystems. This study investigates the treatment processes employed at a ballast water treatment facility in Valdez, Alaska, that remove hydrocarbons from unsegregated ballast water. Specifically, the aim is to quantify and characterize hydrocarbons of emerging concern, known as dissolved hydrocarbon oxidation products (HOPs) and heavy metals (HMs), throughout the treatment process. Specialized analytical techniques were employed, such as non-volatile dissolved organic carbon analysis, fluorescence spectroscopy, Fourier transform-ion cyclotron resonance-mass spectrometry, and inductively coupled plasma triple quadrupole mass spectrometry. Results …

Ltspice Modeling For Gan-Git Hemt Including Cryogenic Temperature, Md Maksudul Hossain, Yuqi Wei, H. Alan Mantooth

Electrical Engineering Faculty Publications and Presentations

Highly efficient electrically driven avionics have led to a renewed interest in cryogenic propulsion systems with the goal of reducing carbon emission footprint. Although cryogenic converters promise better efficiency and improved power density, the successful design is incumbent upon the appropriate switching device selection and simulation-based analyses prior to initial prototyping. In this work, a datasheet-driven compact model for a gallium nitride (GaN) Gate Injection Transistor (GIT) has been proposed and implemented in LTspice, a versatile, high performance, and free circuit simulator in order to investigate the merit of the chosen device in a power electronic system.

Energy Harvesting For Residential Microgrid Distributed Sensor Systems, Devin C. Whalen

Master’s Theses

Microgrids are localized, independent power grids that can operate while connected to the larger electrical grid. These systems make intelligent decisions regarding power management and use an array of components to monitor power generation, consumption, and environmental conditions. While this technology can save end users money, the complexity of installation and maintenance has limited the adoption of microgrids in residential spaces. To simplify this technology for end users, the next evolution of microgrid components includes sensors that are wireless and ambiently powered.

Even with a microgrid installed, significant energy is wasted in residential spaces. To address this loss, energy harvesting …

The Transformer Modelling For Vftos Calculation - A Comprehensive Review, Mohamed Salah, Ebrahim A. Badran, Mansour H. Abdelrahman

Mansoura Engineering Journal

The transformer is exposed to Very fast transient overvoltages (VFTOs) originated from the switching operations in the gas insulated switchgears (GIS), these overvoltages may damage the transformer insulation and result in catastrophic failures. Consequently, the transformer should be modeled to handle the transient state. In this work, the methods published in the literature to illustrate the VFTOs in GIS are reviewed, and then an overview of the transformer modelling techniques is presented with the contribution and shortcomings of each technique. The determination methods of the parameters required for the modelling of the transformer are also reviewed. In addition, the contributions …

Calculation Of Elastic Constants Of Bulk Metallic Glasses From Indentation Tests, Zhitong Xu, Ming Liu, Fuqian Yang

Chemical and Materials Engineering Faculty Publications

One of the challenges in the applications of instrumented indentation is to simultaneously measure elastic modulus and Poisson’s ratio of homogeneous, isotropic materials. This work proposes empirical equations for simultaneous calculation of elastic modulus and Poisson’s ratio of bulk metallic glasses (BMGs) from the ratio of the short diagonal length to the long diagonal length and the area of the Knoop imprint. The parameters pre- sented in the empirical equations are determined first by Knoop microhardness tests of 24 BMGs, whose elastic moduli and Poisson’s ratios are measured by resonant ultrasound spectroscopy. These empirical equations are further validated by the …

“Zero” Porosity High Loading Nmc622 Positive Electrodes For Li-Ion Batteries, Haidar Y. Alolaywi, Kubra Uzun, Yang-Tse Cheng

Chemical and Materials Engineering Faculty Publications

LiNi0.6 Mn0.2Co0.2 O 2 (NMC622) is a widely used positive electrode material for lithium-ion batteries, including electric vehicles. In this work, we investigated the effects of porosity, ranging from “zero” to the typical 35%, on the electrochemical behavior of high- loading NMC622 electrodes. Although it is well known that the energy density of the electrode increases with increasing areal capacity and decreasing porosity, NMC-positive electrodes with exceedingly low porosity (e.g., near zero) and high loading (e.g., 4 mAh cm−2 ) have not been investigated. Here, we report an intriguing observation that the “zero porosity” NMC electrode can have higher capacity …

Multiple Sclerosis Diagnosis With Deep Learning And Explainable Ai, Nighat Bibi, Jane Courtney, Kathleen M. Curran

Conference papers

Diagnosing multiple sclerosis (MS) presents significant challenges due to its complex clinical presentation and the subjective interpretation of imaging findings. Machine learning (ML) and deep learning (DL) models, despite their potential, often exacerbate these challenges with their opaque decision-making processes, hindering clinical integration. This study addresses these limitations by employing eXplainable Artificial Intelligence (XAI) techniques, specifically integrating Grad-CAM within a Convolutional Neural Network (CNN) framework, EfficientNetB1, for the diagnosis of MS. The primary objective is to enhance the transparency and reliability of MS diagnosis by providing clear visual insights into the model’s decision-making process, while also identifying and mitigating potential …

Enhancing Multiple Sclerosis Diagnosis With Explainable Ai, Nighat Bibi, Jane Courtney, Kathleen M. Curran

Conference papers

Multiple sclerosis (MS) is a complex neurological disorder that requires precise diagnosis for effective treatment. This study aims to enhance MS diagnosis by integrating eXplainable Artificial Intelligence (XAI) techniques into a convolutional neural network (CNN) framework. The proposed model achieves high accuracy and provides visual explanations of its predictions. Using the Gradient-weighted Class Activation Mapping (Grad-CAM) method, it highlights the most important regions in MRI images influencing the model’s decisions, adding transparency and trust to the diagnostic process. The CNN, trained on a dataset of FLAIR MRI images, demonstrates superior performance compared to existing models, with a final accuracy of …

Digitalization Of Railway Transportation Through Ai-Powered Services: Digital Twin Trains, Salih Sarp, Murat Kuzlu, Vukica Jovanovic, Zekeriya Polat, Ozgur Guler

Engineering Technology Faculty Publications

Digitalization is a key concept that transformed the various industries through technologies like Internet of Things (IoT), Artificial Intelligence (AI), and Digital Twin (DT). Although innovations provided by the advancement of digitalization have paved the way for more efficient operations and products for transportation, the rail transportation sector struggles to keep up with the rest of the transportation industry, since trains are designed to last for decades, and the insufficient infrastructure investment leads to multiple railroad derailments across the globe. Therefore, the primary aim is to transform current railway systems into human-centric, adaptable, sustainable and future-proof networks, aligning with Industry …

Nano-Pulse Treatment Overcomes The Immunosuppressive Tumor Microenvironment To Elicit In Situ Vaccination Protection Against Breast Cancer, Anthony Nanajian, Megan Scott, Niculina I. Burcus, Brittney L. Ruedlinger, Edwin A. Oshin, Stephen J. Beebe, Siqi Guo

Bioelectrics Publications

We previously reported that nano-pulse treatment (NPT), a pulsed power technology, resulted in 4T1-luc mammary tumor elimination and a strong in situ vaccination, thereby completely protecting tumor-free animals against a second live tumor challenge. The mechanism whereby NPT mounts effective antitumor immune responses in the 4T1 breast cancer predominantly immunosuppressive tumor microenvironment (TME) remains unanswered. In this study, orthotopic 4T1 mouse breast tumors were treated with NPT (100 ns, 50 kV/cm, 1000 pulses, 3 Hz). Blood, spleen, draining lymph nodes, and tumors were harvested at 4-h, 8-h, 1-day, 3-day, 7-day, and 3-month post-treatment intervals for the analysis of frequencies, death, …

Teaching Analytics Online: A Self-Study Of Professional Practice, Andrew J. Collins, Brandon Butler, James F. Leathrum Jr., Christopher J. Lynch

Engineering Management & Systems Engineering Faculty Publications

As the COVID-19 pandemic caused severe disruption to education enterprises throughout the world, the main response by educational institutions was to move to online learning environments. The purpose of this study was to understand better how instructors could improve online learning for a professional-level week-long short course in a highly technical area (data analytics), which had, pre-COVID, been a hands-on computer, laboratory-based learning experience. The authors used self-study of professional practice to elicit and understand the major issues and concerns of the transition to an online learning environment. Under the guidance of a colleague in teacher education, three course instructors …

Urban Flood Extent Segmentation And Evaluation From Real-World Surveillance Camera Images Using Deep Convolutional Neural Network, Yidi Wang, Yawen Shen, Behrouz Salahshour, Mecit Cetin, Khan Iftekharuddin, Navid Tahvildari, Guoping Huang, Devin K. Harris, Kwame Ampofo, Jonathan L. Goodall

Civil & Environmental Engineering Faculty Publications

This study explores the use of Deep Convolutional Neural Network (DCNN) for semantic segmentation of flood images. Imagery datasets of urban flooding were used to train two DCNN-based models, and camera images were used to test the application of the models with real-world data. Validation results show that both models extracted flood extent with a mean F1-score over 0.9. The factors that affected the performance included still water surface with specular reflection, wet road surface, and low illumination. In testing, reduced visibility during a storm and raindrops on surveillance cameras were major problems that affected the segmentation of flood extent. …

Advanced Nested Coaxial Thin-Film Zno Nanostructures Synthesized By Atomic Layer Deposition For Improved Sensing Performance, Pengtao Lin, Lari S. Zhang, Kai Zhang, Helmut Baumgart

Electrical & Computer Engineering Faculty Publications

We report a new synthesis method for multiple-walled nested thin-film nanostructures by combining hydrothermal growth methods with atomic layer deposition (ALD) thin-film technology and sacrificial films, thereby increasing the surface-to-volume ratio to improve the sensing performance of novel ZnO gas sensors. Single-crystal ZnO nanorods serve as the core of the nanostructure assembly and were synthesized hydrothermally on fine-grained ALD ZnO seed films. Subsequently, the ZnO core nanotubes were coated with alternating sacrificial coaxial 3D wrap-around ALD Al2O3 films and ALD ZnO films. Basically, the center nanorod was coated with an ALD 3D wrap-around Al₂O₃ sacrificial layer to realize a nested …

A Generative Approach For Document Enhancement With Small Unpaired Data, Mohammad Shahab Uddin, Wael Khallouli, Andres Sousa-Poza, Samuel Kovacic, Jiang Li

Engineering Management & Systems Engineering Faculty Publications

Shipbuilding drawings, crafted manually before the digital era, are vital for historical reference and technical insight. However, their digital versions, stored as scanned PDFs, often contain significant noise, making them unsuitable for use in modern CAD software like AutoCAD. Traditional denoising techniques struggle with the diverse and intense noise found in these documents, which also does not adhere to standard noise models. In this paper, we propose an innovative generative approach tailored for document enhancement, particularly focusing on shipbuilding drawings. For a small, unpaired dataset of clean and noisy shipbuilding drawing documents, we first learn to generate the noise in …

Technological Advancements In Brunei’S Local Agriculture And Fisheries Companies: An Exploratory Study Based On Field Observations, Muhammad Firdaus Mujibuddin Syah Mustafa, Navaranjan Namasivayam, Hong Shyang Pei, Fatnin Farhanah Alihan, Amni Sahilah Sahrullamzah, Khairina Umairah Takiyaudin

ASEAN Journal on Science and Technology for Development

This exploratory study, through seven field observations and interviews, investigates the technological advancements transforming Brunei's agricultural landscape in pursuit of local production augmentation and self-sufficiency. It confronts challenges with emerging technologies like aquaponics, hydroponics, fertigation systems, closed-house poultry systems, and UV lighting, which hold promise for enhanced farming practices. The research provides a comprehensive assessment of current practices, including livestock management advancements, underscoring their potential to boost productivity, optimize resource use, and promote sustainable agriculture. Furthermore, it discusses the broader implications for industry standards, job employability, and alignment with Brunei's Vision 2035. The findings contribute invaluable insights, advocating for strategic …

Prevalence Of Resistant Escherichia Coli Isolated From Local Meats Sold In Tema Metropolis, Ghana, Frederick Adzitey, Innocent Allan Anachinaba, Charles Addo-Quaye Brown, Nurul Huda, Masmuniri Rambli

ASEAN Journal on Science and Technology for Development

Contamination of meat by Escherichia coli (E. coli) can take its source from the live animal or by cross contamination. The study determined the prevalence of resistance of E. coli isolated from locally produced meats in the Tema Metropolis. Beef (n=200), chicken (n=200) and pork (n=200) were randomly selected and evaluated for the presence of E. coli using the procedure in the Bacteriological Analytical Manual of USA-FDA. The disc diffusion method was used for antibiotic susceptibility test of E. coli (n=55) isolates. Locally produced beef (67%), chicken (41%) and pork (23%) were contaminated by E. coli. Escherichia coli isolates were …

Nutritional Quality Of Cultured Giant Freshwater Prawns (Macrobrachium Rosenbergii), Nurul F.M.S. Rizal, Najeebah A. Tashim, Zuhairi Azahari, Aida M. Basri, Tiong H. Lim, Aqilah Junaidi, Suriayati Chuprat, Seno A. Putra, Hanif Fakhrurroja

ASEAN Journal on Science and Technology for Development

Macrobrachium rosenbergii, or the giant freshwater prawn has high market demand due to its exceptional nutritional value for the human diet. Often, most nutritional studies focus on the edible prawn parts, rather than the prawn discarded components. The nutritional evaluation of different prawn parts can provide insights into the nutrient composition and guiding for the development of value-added products. Three groups of prawn samples were collected from 3 different ponds, representing different prawn sizes. The water quality analysis of each pond was also conducted to determine the extent to which it can affect the nutritional composition. The conventional and biochemical …

Pelletizing Of Attapulgite/Carbon Nanocomposite From Used Bleaching Earth For Continuous Treatment Of Wastewater From A Natural Rubber Factory, Lilis Hermida, Joni Agustian, Yin Fong Yeong

ASEAN Journal on Science and Technology for Development

The increase in global natural rubber production has correspondingly elevated the generation of wastewater. To address this, various wastewater treatment methods are being implemented, with continuous adsorption emerging as a promising approach. In this recent study, pelletizing of attapulgite/carbon nanocomposite was conducted to obtain pellet adsorbent for continuous adsorption of wastewater from natural rubber industry. The study aimed to evaluate the characteristics and performance of the pellet adsorbent in wastewater treatment. In the preparation, spent bleaching earth (SBE) with a 200-mesh particle size was calcined to obtain attapulgite/carbon nanocomposite. This nanocomposite was mixed with bentonite clay at a 70:30 (w/w) …