Engineering Commons^™

Electophorectic Deposition For Novel Nanodecorated Electrodes Towards Thermally Charging Supercapacitor (Tcsc), Ashish Thakur

Mechanical and Aerospace Engineering Theses - Archive

Thermally Self-Charging Supercapacitors (TSCS) are a promising new technology that can harvest waste heat to produce electrical energy. The Soret effect is exploited wherein ion separation due a temperature gradient leads to a potential difference. Here, we use electrophoretic deposition (EPD), a room-temperature, scalable, universal technique, to obtain CNT decorated electrodes for fabrication of such TSCS devices with ionic liquid electrolyte. We further show that precise control over deposition parameters can be used for optimization of TSCS performance metrics. TSCS devices were tested by several characterization standards, indicating the superior performance of nanodecorated electrodes obtained by EPD.

Thermal Damage And Mechanical Failure Analysis Of Polymers, Tina Ko

Mechanical and Aerospace Engineering Theses - Archive

As the demand for more intricate and precise components increases, polymers continue to stand out for their flexibility, durability, and adaptability across numerous applications. From aerospace to biomedical engineering industries, polymers are valued for their versatility and customizability, enabling the creation of complex geometries or achieving specific material properties. Since polymers are widely used, analyzing their thermal and mechanical properties is essential to understand their behavior under high-energy exposure or defects. Two types of polymers were analyzed: Polydimethylsiloxane (PDMS) and 3D-printed digital materials. This thesis investigates the mechanical and thermal response of polymers through two distinct studies. The first part …

Dynamics Of Separated Flows In Diffusers With Vortex Generators, Sandeep Eldho James

Mechanical and Aerospace Engineering Dissertations - Archive

Flow through curved diffusers is complicated due to the possibility of flow separation and secondary flows. Vortex generators (VGs) are a class of passive flow separation control devices used to improve the flow quality in curved diffusers by suppressing flow separation. However, the literature review demands an in-depth investigation on the physical mechanisms related to flow separation control. Thus, this study aims to improve the understanding of the underlying flow physics associated with VG-induced flow separation control in confined flows. The chosen geometry for this study is a well-documented asymmetric diffuser which exhibits a mild flow separation.

The theoretical formulation …

Generalizable Fugitive Carrier Method For 3d Printing Of Hydrogels, Hakan Arslan

Mechanical and Aerospace Engineering Dissertations - Archive

Hydrogels, with physical characteristics resembling biological soft tissues, hold great potential for bioinspired and biomedical applications. However, using them in additive manufacturing systems has challenges because of their poor mechanical and rheological properties. In response to these challenges, we introduce a fugitive carrier method, a novel and generalizable approach for materials incompatible with pneumatic-based extrusion three-dimensional (3D) printers. Our developed fugitive carrier method allows the 3D printing of a broad spectrum of hydrogel precursors with low viscosity while retaining their inherent properties. This technique has been successfully demonstrated by creating biomimetic structures with anisotropic and programmable systems utilizing temperature-sensitive hydrogel …

Quantitative Modeling Of Micro Discharge And Oxide Growth In Plasma Electrolytic Oxidation Of Titanium, Kingsley I. Ochiabuto

Material Science and Engineering Dissertations - Archive

Plasma electrolytic oxidation (PEO) has been extensively applied in the past to improve the tribological properties of titanium and its alloys allowing their widespread use in industrial applications. However, the complete PEO mechanism of action remains unclear. While there are several mathematical models providing useful insights into the PEO process, they do not fully incorporate the effect of applied potential on the outcomes of PEO. In this work, we develop an experimentally informed computational model by expanding on the dielectric breakdown model. We incorporate experimental data to extract key parameters, exploring the iterative dependency of the oxide thickness and ionic …

Machine Learning-Based Methodology For Multi-Objective And Multi-Design Variable Optimization Of Finned Heat Sinks And Evaluation Of Electrochemical Additive Manufactured Heat Sink Designs For Single-Phase Immersion Cooling, Joseph F. Herring Ii

Mechanical and Aerospace Engineering Dissertations - Archive

Traditional air-cooling along with corresponding heat sinks are beginning to reach performance limits, requiring lower air-supply temperatures and higher air-supply flowrates, in order to meet the rising thermal management requirements of high power-density electronics. A switch from air-cooling to single-phase immersion cooling provides significant thermal performance improvement and reliability benefits. When hardware which is designed for air cooling is implemented within a single-phase immersion cooling regime, optimization of the heat sinks provides additional thermal performance improvements. This work investigates performance of a machine learning (ML) approach to building a predictive model of the multi objective and multi-design variable optimization of …

Human System Composite Performance Measures: General Systems Performance Theory Insights, Lawrence Disalvi

Bioengineering Dissertations - Archive

Composite Performance Measures (CPMs) of human performance are widely employed in applications that range from mundane to life-changing, yet they are frequently presented without explanation or reference to theoretical underpinnings. The conceptual soundness of a widely used CPM approach, based on additive combination of constituent components, has been called into question by Kondraske. He argues the relevance of General Systems Performance Theory (GSPT) and performance capacity envelope concepts when applied to multidimensional CPM measures.

To obtain evidence-based answers to assertions regarding CPM types and rationale employed in medical and non-medical contexts, a Systematic Descriptive Review was conducted. Separately, the GSPT-based …

Algorithm Development For Analysis Of Optical Time-Series Data Generated By Biomodal Optical-Electrical Nanopore Sensor, Yu-Shiuan Huang

Bioengineering Theses - Archive

Nanopore biosensors have played an essential role in the scientific investigation of DNA, RNA, proteins, and other bio-analytes. Traditional nanopore biosensors detect variations in electrical current conductance caused by the analyte blocking the current passing transiently through a nano-sized aperture, i.e., the nanopore. This electrical data provides information about the amount of current blockage when the analyte is inside the nanopore and the time it takes for analytes to travel through the nanopore (translocation time). The translocation time of analytes in standard nanopore measurements is typically very short, usually tens of microseconds, limiting the accuracy of measuring the analytes’ characteristics. …

Computational And Experimental Analysis Of Silica Nanoparticles Under Dc And Ac Electric Fields Using A Self-Induced Back Action Actuated Nanopore Electrophoresis (Sane) Sensor, Homayoun Asadzadeh, Scott Renkes, George Alexandrakis, Minjun Kim, Scott Turpin

Bioengineering Dissertations - Archive

In this dissertation I have studied a novel single-molecule nanosensor that integrates a Solid-State Nanopore (SSNP), milled in silicon nitride with a Double Nanohole (DNH) nanoaperture, milled in gold. This device leverages Self-Induced Back-Action (SIBA) for optical trapping with ssNP electrical sensing and is called the SIBA-Actuated Nanopore Electrophoresis (SANE) sensor. My lab has previously shown that simultaneous acquisition of bimodal optical and direct current (DC) electrical signatures enables more detailed characterization of nanoscopic analytes compared to using electrical data alone, which are typically collected by ssNP sensors. In this work I have first studied by COMSOL Multiphysics simulations the …

Spray-On Sensor Formulations That Enable Detection Of Physical And Chemical Stimuli, Priyanka Shiveshwarkar

Bioengineering Dissertations - Archive

Polydiacetylene based materials have been used for a variety of liquid phase sensing applications. There remains a need for low cost, easy-to-read gas phase sensors for continuous monitoring of physiological parameters and environmental hazards at work or at home. Such sensors could have applications in everyday life, for example as point-of-care or at home testing devices to enable early detection of disease to reduce healthcare costs. Making accessible and non-invasive technologies for monitoring of health and health risks provides individuals with the ability to be proactive in regard to their health and safety. In other examples, environmental monitoring systems could …

Development Of Anti-Microbial Nanocoatings On Metallic Surfaces To Prevent Infections, Luis Fernando Soto Garcia

Bioengineering Dissertations - Archive

Healthcare-associated infections have a prevalence of about 7% in the United States and up to 50% in some developing nations. They not only present a constant risk for inpatients and healthcare workers but are also a serious challenge to human health services worldwide. These infections can be transmitted via contaminated non-critical surfaces like doorknobs and bedrails, which are routinely cleaned with low-level disinfectants approved by the U.S. Environmental Protection Agency. However, this strategy has limited efficacy since recontamination occurs, resulting in these surfaces again becoming vectors of infection. In this work, we addressed this issue by developing a self-disinfecting nanocomposite …

Net-Zero Home Race: Gamification For Learning Energy Consumption Merit, Terry E. Payne

Civil Engineering Theses - Archive

Buildings have contributed significantly to carbon emissions over the past decades, amplified by rapid construction growth. To address this, sustainable concepts like energy efficiency and financial planning for home retrofitting have become essential in promoting environmentally conscious practices. NZHR was created as a gamified experience to help bridge the gap between education and motivational enjoyment. Testing the game demonstrated participants' ability to learn and understand the importance of strategic thinking with home retrofit upgrades. Gamification principles such as the Octalysis and Bartle test were incorporated into the design process to construct a well-rounded game that provides intrinsic and extrinsic principles. …

Experimental And Finite Element Investigation Of Shear Transfer Mechanisms And Capacity Of Continuous Post-Tensioned Concrete Beams In One-Way Slab Buildings, Suman Rijal

Civil Engineering Theses - Archive

This study investigates the shear behavior and resistance mechanisms of continuous post-tensioned beams commonly used in one-way slab buildings. Combining experimental and analytical methods, the research focuses on the targeted failure regions of prestressed and non-prestressed continuous beams to gain deeper insights into their shear behavior. The large-scale specimens used in this study featured realistic parabolic tendon profiles and an average prestress level comparable to that used in actual construction. The experimental program includes three test series, with beam designs and setups refined for each series based on observations of shear crack development and progression in the preceding series. This …

Assessing The Seismic Performance Of 45 Ft And 65 Ft Special Truss Moment Frames (Stmfs) Designed With Proposed 2027 Aisc Seismic Provisions Using Nonlinear Time-History Analysis, Vesal Shakibaie

Civil Engineering Theses - Archive

This thesis presents a comprehensive investigation into the seismic design and performance of Special Truss Moment Frames (STMFs) with long spans, focusing on two configurations: STMFs with Vierendeel panels and those with X-braced diagonals in the special segment. The study assesses two case studies with spans of 45 ft and 65 ft, analyzing their behavior under Design Basis Earthquake (DBE) and Maximum Considered Earthquake (MCE) scenarios. The structures were designed according to the latest proposed 2027 revision of the AISC Seismic Provisions, which includes significant changes compared to the published 2022 version. Nonlinear time-history analysis and nonlinear static (push-over) analysis …

Generating Blood Analog For Laser Induced Fluorescent Particle Image Velocimetry, Chungyiu Ma, Jared Chong, Hang Yi, Zifeng Yang, Luke Bramlage, Bryan Ludwig

Mechanical and Materials Engineering Faculty Publications

To mimic blood non-Newtonian viscosity features under designated temperatures from 305 to 315 K, transparent blood analogs were generated by the mixture of xanthan gum and deionized water with fluorescent particles for laser induced fluorescent particle image velocimetry.

Planning Innovation For Implementing Modular Prefabricated Construction In Housing Development In Indonesia Using A Risk-Based Iso 56002:2019 Approach To Improve Project Performance, Deansa Agya Rahman, Yusuf Latief

Smart City

The development of housing in Indonesia, growing rapidly due to urbanization and population growth, faces challenges in terms of land, labor, and housing backlog. Despite being innovative, modular prefabrication methods are limited by unattractive designs and high costs, slowing down construction, harming the productivity of construction companies, and hindering the growth of the national construction sector. These challenges are prevalent in various countries and are influenced by low knowledge, conservative mindsets, and inhibiting regulations. In Indonesia, additional issues include a lack of mastery of modular prefabrication methods and awareness of long-term benefits. This research identified innovative risk-based applications of modular …

Articulating Balsa Wood Bridge, Cole Blevins

All Undergraduate Projects

The objective of this project was to design and construct an articulating bridge consisting of only balsa wood and glue to meet a set of given requirements. The main requirements include a maximum bridge weight, minimum load to be supported, and a minimum height that the bridge must raise to utilizing an electric motor.

To meet the objective of the project, a series of engineering analyses were completed to determine suitable dimensions and geometry for each component of the bridge and articulation structure. Before conducting analyses for the bridge, a few different truss structures were considered including a Pratt truss, …

Rc Baja: Drivetrain And Chassis, Caden Harris

All Undergraduate Projects

The engineers in the CWU Mechanical Engineering Technology program were asked to design and manufacture a remote-controlled Baja car to compete in several different events. The car was required to compete in a drag race, slalom event, and Baja event against other cars created by engineering students. To compete at the highest level, the cars needed to finely balance ruggedness, weight, torque, and top speed.

This report is dedicated to the designing, manufacturing, and testing of the drivetrain and chassis that supported the RC car as it competed in the school-sanctioned competition; a partner was responsible for the steering and …

Rc Baja: Suspension And Steering, Daniel Davis

All Undergraduate Projects

Engineers enrolled in the Mechanical Engineering Technology program at Central Washington University were tasked with developing a vehicle to compete in the ASME Baja competition. The engineers were in teams of two, one focused on suspension and steering and the other focused on drive train and chassis.

To begin the design of the vehicle, engineering analyses were completed on each of the components to comply with the requirements set by the team. After completion of multiple analyses for the components of the vehicle, the dimensions were validated and have been created in a CAD program to allow for virtual assembly …

Rc Baja: Drivetrain & Chassis, Ahmad Adam

All Undergraduate Projects

The project's primary aim is to employ engineering techniques in the design and construction of an RC Baja car, ensuring the chassis and drivetrain are sufficient for participation in the ASME RC Baja competition. The suspension and steering system were entrusted to a teammate to contribute to the project's success.

In approaching this problem, various analyses were conducted during fall quarter, in deciding the design of the RC car. For example, one analysis established the necessary output power to attain a maximum speed of 25 miles per hour within a 15-second timeframe. The analysis employed acceleration and power equations …

Nasa Rocket Payload Airfoil Deceleration, Brycen Geck

All Undergraduate Projects

NASA Student Launch Initiative gave a requirement that a lander must descend to the ground from a height of 400-800 feet with predetermined human survivability without using parachute or streamers. Around sixty colleges were chosen from around the United States to compete in competition. This competition and data taken will help innovate the rocket and lander programs in full scale space exploration in the future.

Design of the payload involved intensive design, testing and aerodynamic analysis. Majority of the manufacturing revolved around 3D printing, aluminum 5051 sheet and carbon fiber vacuum bagging. PLA and PETG was used on components which …

Articulating Balsa Wood Bridge, Nate Harris

All Undergraduate Projects

This report describes the design, construction, and testing of a small-scale articulating balsa wood bridge that allowed passage over normally impassable terrain. The bridge was required to span a 400mm gap, while also articulating the midpoint of the bridge 140mm above its resting position. The bridge also needed to support a 20kg (44 lbs.) point load in the center of the bridge, and the bridge and articulation tower together needed to weigh less than 85 (0.19 lbs.) grams.

To construct the bridge, statics and mechanics of materials was used to design a truss that was calculated to support the load …

Articulating Balsa Wood Bridge, Samuel K. Katsuda

All Undergraduate Projects

The objective of this project was to design, construct and test an articulating balsa wood bridge. It needed to fit certain requirements such as maintaining the bridge structure and articulation structure weight under 85g, being able to articulate 140mm, and be able to withstand a load of 20kg at the middle. The aim was to both create a product, but also give the student a chance to demonstrate their practical knowledge in engineering and going through the processes.

To complete this project as mentioned the student began by creating an initial design and performing a series of analyses on the …

The Tortuga Drivtrain And Chassis Rc Baja, Roberto C. Vieyra Avalos

All Undergraduate Projects

The students in charge of the project, seniors at Central Washington University were tasked with the design and manufacturing of the RC Baja to compete in the Slalom and Sprint event and the Baja event where the maneuverability and acceleration are demonstrated. The project was divided between Roberto, in charge of the drivetrain and chassis and Rogelio, in charge of the steering and suspension. There were also various requirements like velocity and deflection, ensuring the device reaches 30mph and keeping the deflection of components to a minimum and many others which can be seen in section D of the introduction. …

Dueling Robot, Abigail Coy

All Undergraduate Projects

This project was undertaken as a personal challenge to combine a Mechanical Engineering Technology degree and an Electrical Engineering Technology degree into a single final project showing the cumulative knowledge gained. It was determined that a robot to participate in Western Allied Robotics would be designed and manufactured for the 3 lb. weight class.

A two-part power system was designed to provide more power to the weapon arm. This design combined a compressive spring’s kinetic energy with the torque from the electric motor. Research determined all of the purchased components required and analysis were performed to determine the geometry and …

Special Issue Editorial: Business Innovation For The Sustainable Development Goals, Mohamed Saleem Nazmudeen, Fadzliwati Mohiddin, Stephen Singaraju, Seyed M Buhari

ASEAN Journal on Science and Technology for Development

Welcome to this special issue of the ASEAN Journal on Science and Technology for Development (AJSTD), focused on “Business Innovation for the Sustainable Development Goals (SDGs)." This collection features a robust ensemble of 30 papers that not only highlight innovative business practices across the ASEAN region but also align these innovations with the Sustainable Development Goals. These contributions span a diverse range of disciplines, grouped into five broad categories: Management and Strategy, Financial Innovations, Marketing and Consumer Behavior, Information Technology and Systems, and Environmental and Social Impact.

Entrepreneurship Education In The Lens Of The Senior High School Students, Calvin J. Caliat, Nehmar J. Dalhadi, Kathleen M. Ishmael

ASEAN Journal on Science and Technology for Development

This study uncovers the perspective on the entrepreneurship education of senior high school students on the university campus. This paper is employed a descriptive research design using a survey ques-tionnaire for the respondents. The survey found that respondents are willing to engage in business be-tween one to 10 years after college. The willingness is due to the encouragement from their parents, independent decision-making, building self-confidence and knowledge, and chasing their dreams. However, there are two significant factors that hinder this, including a need for more business investment and experience. The principal attitudes of an entrepreneur include self-control and creativity. Gaining …

Fe-Ni-Cu-Pge Sulfide Transport Mechanisms And Carbon-Sulfur Interactions In Lower Crustal Magmatic Settings: A Study From The Valmaggia Ultramafic Pipe, Ivrea-Verbano Zone, Italy, Shelby Leann Clark

Masters Theses

"Constraining the processes that control the transport and deposition of sulfides in the deep lithosphere is an important step in expanding ore deposit exploration search space to include exhumed lower crustal rocks. The ultramafic sulfide ore-bearing Valmaggia pipe in the Ivrea-Verbano Zone of NW Italy, an exhumed cross section of the overlying lower continental crust and subcontinental lithospheric mantle, gives critical insight into metallogenic processes in lower crustal settings. The ~300 m wide metasomatized pipe hosts Fe-Ni-Cu-(PGE±Co±Au) sulfide mineralization that is commonly associated with locally abundant carbonates and hydrous silicates (phlogopite, amphibole). Previous studies suggested that sulfides were physically transported …

Role Of Occupational Therapy Assessment And Office Ergonomics To Support Students With Accommodations In Higher Learning: A Narrative Review, Behdin Nowrouzi-Kia, Christi Tam, Raabia Khan, Bushra Alam, Sujatha Alla

Engineering Management & Systems Engineering Faculty Publications

Postsecondary students with disabilities (SWDs) face significant challenges to their academic and personal well-being. There is a demand for more supportive strategies to facilitate fulfilling and equitable academic experiences for SWDs. This review aimed to (1) determine the effectiveness of various interventions, programs, and accommodations for enhancing the overall well-being of postsecondary SWDs and (2) evaluate the implications of these support strategies for disability service providers at postsecondary institutions. A narrative review was conducted, examining 13 studies aimed at enhancing the well-being of postsecondary SWDs. Studies were classified using the International Classification of Functioning, Disability and Health (ICF) Model. Ergonomics, …

Reinforcement Learning For Optimal Kicking Actions In Humanoid Robotics: Advancing Robotic Autonomy And Versatility, Suresh Dodda, Sathish Kumar Chintala, Sukender Reddy Mallreddy, Sharath Chandra Macha, Yashwanth Vasa, Sapan Bharadwaj Bonala, Navin Kamuni, Sujatha Alla

Engineering Management & Systems Engineering Faculty Publications

Acquiring the necessary skills to perform a work effectively and efficiently requires a significant investment of time and computing power. Previous applications of Reinforcement Learning (RL) for action optimization in humanoid robotics have shown how promising this technology is for moving robotics towards true autonomy and versatility. Therefore, this study offers the first use of RL to create an entirely optimal kicking action for the Alderbaran Nao robot. Kicking motions that were steady, precise, quick, and able to kick farther than any existing RoboCup squad were generated by optimizing for a multi-objective reward function. We demonstrate that the ideal kicking …