Engineering Commons^™

Evolution Of Shock-Driven Multi-Phase Instability, Joshua Chavez

Mechanical Engineering ETDs

ABSTRACT

In many models and experiments using shock tubes and shock tube instabilities, measurements of velocity and position of the flow features are frequently taken in a single horizontal direction (or in one plane), however, the three-dimensional flow structure is important and cannot be fully resolved by such measurements. By placing a mirror at 45 degrees atop a test section of a shock tube, it becomes possible to visualize the flow from two directions simultaneously. The mirror is used to see if viable data can be gathered from the second view in conjunction with the main view. With high-speed video …

Transition-Metal Ions In Β-Ga2O3 Crystals: Identification Of Ni Acceptors, Timothy D. Gustafson, Nancy C. Giles, Brian C. Holloway, J. Jesenovec, B. L. Dutton, M. D. Mccluskey, Larry E. Halliburton

Faculty Publications

Excerpt: Transition-metal ions (Ni, Cu, and Zn) in β-Ga₂O₃ crystals form deep acceptor levels in the lower half of the bandgap. In the present study, we characterize the Ni acceptors in a Czochralski-grown crystal and find that their (0/−) level is approximately 1.40 eV above the maximum of the valence band.

Seismic Activity And Flooding Of Hard Coal Mines In The Ostrava-Karvina Coalfield, Petr Konicek, Eva Jirankova, Vlastimil Kajzar, Jan Schreiber, Pavel Malucha, Kristyna Schuchova

Journal of Sustainable Mining

The termination of mining activities often results in post-mining problems and risks. One of these issues is the flooding of mines. Long-term mining in the Ostrava and Petrvald sub-basins in the Upper Silesian Coal Basin finished in 1994. Tens of coal seams were mined here, and the depth of mining reached more than 1000 m below the surface. Flooding of the Ostrava sub-basin started in 1994. The Ostrava and Petrvald sub-basins were flooded from one half only to prevent water from flooding into the Karvina sub-basin, where mining continued. The continual pumping of water has been carried out ever since. …

Numerical Modelling Of Destress Blasting – A State-Of-The-Art Review, Shuting Miao, Petr Konicek, Peng-Zhi Pan, Hani Mitri

Journal of Sustainable Mining

As a proactive mine safety measure against the occurrence of rockburst, destress blasting has been applied to numerous mining conditions to precondition highly stressed rock mass to mitigate the risk of rockburst occurrence in deep mines as well as in deep underground constructions. However, the application of destress blasting mostly depends on engineering experience, while its mechanism and efficiency have not been well understood. Rapid advances in computer technology have made numerical simulation an economical and effective method to study the rock blasting effect. Enormous research efforts have been made to numerically investigate the blasting fracture mechanism, optimize blasting design, …

Analysis Of The Application Of Methane-Bearing Capacity Test Methods In The Conditions Of Polish Mining, Marcin Karbownik

Journal of Sustainable Mining

The methane hazard is one of the natural hazards occurring in hard coal mining. The content of natural methane in hard coal seams, the so-called methane-bearing capacity, is one of the key parameters that allow for proper assessment of the methane hazard and the state of the threat of gas and rock outbursts. For safety purposes, there is a constant need to improve the methods for the determination of this parameter. In the conditions of Polish mining, the method used for methane-bearing capacity determination is the direct drill cuttings method. This paper contains a comparative study presenting three different methods …

Proposed Design Fire Scenarios For Underground Hard Rock Mines, Rickard Hansen

Journal of Sustainable Mining

Given the complexity and uniqueness of underground hard rock mines, the application of the design fire scenario approach is recommended when evaluating fire safety in mines. Providing a full set of design fire scenarios – ensuring that several important life safety aspects are covered – for a mine can be challenging. The question is whether a catalogue of potential clusters of design fire scenarios could be developed, covering important aspects found underground? Given the general lack of research into design fires in the mining industry, this paper provides a unique analysis of design fire scenarios in underground hard rock mines. …

Material Characterization And Comparison Of Sol-Gel Deposited And Rf Magnetron Deposited Lead Zirconate Titanate Thin Films, Katherine Lynne Miles

Mechanical Engineering ETDs

Lead zirconate titanate (PZT) has been a material of interest for sensor, actuator, and transducer applications in microelectromechanical systems (MEMS). This is due to their favorable piezoelectric, pyroelectric and ferroelectric properties. While various methods are available to deposit PZT thin films, radio frequency (RF) magnetron sputtering was selected to provide high quality PZT films with the added capability of batch processing. These sputter deposited PZT films were characterized to determine their internal film stress, Young’s modulus, composition, and structure. After characterization, the sputtered PZT samples were poled using corona poling and direct poling methods. As a means of comparison, commercially …

Canopycam – An Edge-Computing Sensing Unit For Continuous Measurement Of Canopy Cover Percentage Of Dry Edible Beans, Wei-Zhen Liang, Joseph Oboamah, Xin Qiao, Yufeng Ge, Robert M. Harveson, Daran Rudnick, Jun Wang, Haishun Yang, Angie Gradiz

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Canopy cover (CC) is an important indicator for crop development. Currently, CC can be estimated indirectly by measuring leaf area index (LAI) using commercially available hand-held meters. However, it does not capture the dynamics of CC. Continuous CC monitoring is essential for dry edible beans production since it can affect crop water use, weed, and disease control. It also helps growers to closely monitor “yellowness”, or senescence of dry beans to decide proper irrigation cutoff timing to allow the crop to dry down for harvest. Therefore, the goal of this study was to develop a device – CanopyCAM, containing software …

The Impact Of Contact Geometry On Sea Ice Stress And Fracture At The Scale Of Ice Floes, Michael J. May

Dartmouth College Master’s Theses

Observations of stress and strain at the scale of ice floes are necessary to fill a gap in our understanding of sea ice mechanical behavior. Current climate and ice dynamics models represent ice mechanical properties using stress-strain relationships largely determined at laboratory-scale (<1m) or from regional-scale (10+km) deformation observations. The former scale does not include all mechanisms of deformation operating in the ice pack; the latter aggregates multiple modes of deformation into non-physical fluid analogies. The Sea Ice Dynamics Experiment (SIDEx) was run in Feb-Mar 2021 to fill this gap, observing stress and strain at the scale of sea ice failure processes. Here we present stress sensor observations. Stress gages (N=31) were deployed over a 4.5km² area in the southern Beaufort Sea to observe in-situ stress. These data were analyzed in the context of deformation observations from satellite imagery and local laser and radar interferometers to explain the drivers of sea ice stress variations before and after fracture. Three case studies between 14 March and 24 March, during which fractures propagated through …

Sustainable Material For Urea Delivery Based On Chitosan Cross-Linked By Glutaraldehyde Saturated Toluene: Characterization And Determination Of The Release Rate Mathematical Model, Jayanudin Jayanudin, Retno S. D. Lestari, Indar Kustiningsih, Dandi Irawanto, Rozak Rozak, Reyonaldo L. A. Wardana, Fakhri Muhammad

Karbala International Journal of Modern Science

The aims of this study were to characterize the urea-loaded chitosan microspheres and determine the release kinetic constants and diffusion coefficients. An emulsion cross-linking method was used to prepare the urea-loaded chitosan microspheres. Urea was dissolved in a solution of chitosan then put into vegetable oil and stirred to form an emulsion. Glutaraldehyde saturated toluene (GST) was added into the emulsion dropwise while continuously stirring for the solidification process. Chitosan microspheres filled with urea were washed, dried, and then analyzed. Characterization of the urea-loaded chitosan microspheres was conducted using a scanning electron microscope (SEM), Raman spectroscopy, X-ray diffraction, and particle …

Rdlnn-Based Image Forgery Detection And Forged Region Detection Using Mot, Akram Hatem Saber, Mohd Ayyub Khan, Basim Galeb Mejbel

Karbala International Journal of Modern Science

Image forgery detection TEMPhas become an emerging research area due to the increasing number of forged images circulating on the internet and other social media, which leads to legal and social issues. Image forgery detection includes the classification of an image as forged or authentic and as well as localizing the forgery wifin the image. In this paper, we propose a Regression Deep Learning Neural Network (RDLNN) based image forgery detection followed by Modified Otsu Thresholding (MOT) algorithm to detect the forged region. The proposed model comprises five steps that are preprocessing, image decomposition, feature extraction, classification and block matching. …

Submillimeter-Wave Cornea Phantom Sensing Over An Extended Depth Of Field With An Axicon-Generated Bessel Beam, Mariangela Baggio, Aleksi Tamminen, Joel Lamberg, Roman Grigorev, Samu-Ville Pälli, Juha Ala-Laurinaho, Irina Nefedova, Jean-Louis Bourges, Sophie X. Deng, Elliott R. Brown, Vincent P. Wallace, Zachary D. Taylor

Electrical Engineering Faculty Publications

The feasibility of a 220 - 330 GHz zero order axicon generated Bessel beam for corneal water content was explored. Simulation and experimental data from the 25-degree cone angle hyperbolic-axicon lens illuminating metallic spherical targets demonstrate a monotonically decreasing, band integrated, backscatter intensity for increasing radius of curvature from 7 - 11 mm, when lens reflector and optical axis are aligned. Further, for radii >= 9.5 mm, maximum signal was obtained with a 1 mm transverse displacement between lens and reflector optical axes arising from spatial correlation between main lobe and out of phase side lobes. Thickness and permittivity parameter …

G-Dam: A Distributed Data Storage With Blockchain Framework For Management Of Groundwater Quality Data, Sukrutha L. T. Vangipuram, Saraju P. Mohanty, Elias Kougianos, Chittaranjan Ray

Department of Civil and Environmental Engineering: Faculty Publications

Groundwater overuse in different domains will eventually lead to global freshwater scarcity. To meet the anticipated demands, many governments worldwide are employing innovative and traditional techniques for forecasting groundwater availability by conducting research and studies. One challenging step for this type of study is collecting groundwater data from different sites and securely sending it to the nearby edges without exposure to hacking and data tampering. In the current paper, we send raw data formats from the Internet of Things to the Distributed Data Storage (DDS) and Blockchain (BC) edges. We use a distributed and decentralized architecture to store the statistics, …

Machine Learning With Gradient-Based Optimization Of Nuclear Waste Vitrification With Uncertainties And Constraints, Lagrande Gunnell, Kyle Manwaring, Xiaonan Lu, Jacob Reynolds, John Vienna, John Hedengren

Faculty Publications

Gekko is an optimization suite in Python that solves optimization problems involving mixed-integer, nonlinear, and differential equations. The purpose of this study is to integrate common Machine Learning (ML) algorithms such as Gaussian Process Regression (GPR), support vector regression (SVR), and artificial neural network (ANN) models into Gekko to solve data based optimization problems. Uncertainty quantification (UQ) is used alongside ML for better decision making. These methods include ensemble methods, model-specific methods, conformal predictions, and the delta method. An optimization problem involving nuclear waste vitrification is presented to demonstrate the benefit of ML in this field. ML models are compared …

Hierarchical Structure And Properties Of The Bone At Nano Level, Farah Hamandi, Tarun Goswami

Biomedical, Industrial & Human Factors Engineering Faculty Publications

Bone is a highly hierarchical complex structure that consists of organic and mineral components represented by collagen molecules (CM) and hydroxyapatite crystals (HAC), respectively. The nanostructure of bone can significantly affect its mechanical properties. There is a lack of understanding how collagen fibrils (CF) in different orientations may affect the mechanical properties of the bone. The objective of this study is to investigate the effect of interaction, orientation, and hydration on atomic models of the bone composed of collagen helix (CH) and HAC, using molecular dynamics simulations and therefrom bone-related disease origins. The results demonstrate that the mechanical properties of …

Characterizations And Potential Recovery Pathways Of Phosphate Mines Waste Rocks, Amine El Mahdi Safhi, Hicham Amar, Yahya El Berdai, Mustapha El Ghorfi, Yassine Taha, Rachid Hakkou, Muthanna H. Al-Dahhan, Mostafa Benzaazoua

Chemical and Biochemical Engineering Faculty Research & Creative Works

The Phosphate Ore Production is Steadily Increasing Due to its High Demand for Agriculture, Medicine, and Others. Ore Extraction Generates a Considerable Quantity of Waste Rocks that Are Generally Stocked in Piles. the Current Research Aims to Investigate the Characterization of Phosphate Mine Waste Rocks (PMWR) Generated in Benguerir, Morocco Mine Site. as a Part of a Wide Project Aiming to Recycle Those Stockpiles, Sensor-Based Ore Sorting Will Be Employed to Separate the Different Lithologies. as a Prior Investigation Before Implementing This Technology, Two Samples of 25 Tons from the Destoning and Screening PMWR Piles Were Sampled and Submitted to …

Effet De La Perte Auditive Et Du Port De Protecteurs Auditifs Sur La Perception Et La Localisation Auditive Des Alarmes De Recul, Véronique Vaillancourt, Chantal Laroche, Christian Giguère, Hugues Nélisse

Rapports de recherche scientifique

Chaque année, des travailleurs se font heurter par un véhicule qui manœuvre en marche arrière. Certaines caractéristiques des alarmes de recul conventionnellement utilisées en milieu de travail (alarmes tonales « bip-bip ») compromettent leur performance à avertir adéquatement les travailleurs de l’approche d’un véhicule, du moins comparativement aux plus récentes alarmes à large bande (« pshit-pshit »). On cite trois principaux désavantages de l’alarme tonale, soit une plus grande difficulté à localiser la provenance du signal sonore dans l’espace, un patron de propagation sonore irrégulier derrière le véhicule lourd, ainsi qu’une nuisance sonore (ou pollution sonore) accrue.

Des études antérieures …

Electromechanical Effects On Micro And Nano Particles Generated From Drug Delivery Devices And Their Implications In Flow And Deposition Efficiency, Mohammed Ali, Mark Miller

Technology Faculty Publications and Presentations

This experimental investigation was undertaken to quantify the electrostatic charge and aerodynamic size distribution of the medicinal drug particles inhaled through an in-vitro mouth-throat (MT) in order to compare the amount of drugs can be delivered to the human lung while mimicking a patient is either sitting or lying. The MT model is a cadaver-based replica cast of human oral-pharyngeal-laryngeal region. Tested drug aerosols were generated by a commercially available metered dose inhaler (MDI). The MT model was placed inside a humidity (95%) and temperature (37^oC) controlled chamber. Its mouth-inlet was positioned horizontally and vertically to simulate sitting …

Corrosion Performance Of Carbon And Galvanized Steel In Calcium Silicate Cement, Maria Cardoso

USF Tampa Graduate Theses and Dissertations

The concrete manufacturing industry has faced challenges with reducing carbon dioxide emissions as it currently produces about 8% of the world’s anthropogenic carbon dioxide emissions. With global atmospheric carbon dioxide concentrations being higher than ever, the solution is urgent. Due to this, a more sustainable type of concrete has been proposed.Calcium silicate cement (CSC) composed of essentially the same raw materials as ordinary portland cement (OPC) cures through the consumption of carbon dioxide rather than hydration like OPC. CSC is being explored as a potential alternative to OPC, however, there is little to no information on its corrosion related durability. …

Ab Initio Insight Into The Electrolysis Of Water On Basal And Edge (Fullerene C20) Surfaces Of 4 Å Single-Walled Carbon Nanotubes, Zhen Jiang, Nadia N. Intan, Qiong Yang

Department of Chemical and Biomolecular Engineering: Faculty Publications

The extreme surface reactivity of 4 Å single-walled carbon nanotubes (SWCNTs) makes for a very promising catalytic material, however, controlling it experimentally has been found to be challenging. Here, we employ ab initio calculations to investigate the extent of surface reactivity and functionalization of 4 Å SWCNTs. We study the kinetics of water dissociation and adsorption on the surface of 4 Å SWCNTs with three different configurations: armchair (3,3), chiral (4,2) and zigzag (5,0). We reveal that out of three different configurations of 4 Å SWCNTs, the surface of tube (5,0) is the most reactive due to its small HOMO–LUMO …

Orthogonal Saw Biosensor Fem Simulation Based On St-Quartz With Crystalline Zno Guiding Layer, Saurabh Patwardhan

USF Tampa Graduate Theses and Dissertations

Detection of trace amounts of biomarkers is a critical requirement in sensing the presence of conditions such as early-stage cancer. The ST cut of the Quartz crystal (ST-Quartz) supports two fundamental surface acoustic waves (SAWs) in mutually perpendicular, or orthogonal, directions: the Rayleigh wave and the shear-horizontal wave (RSAW and SH-SAW, respectively). The orthogonality enables the use of ST-Quartz in biofouling removal by the RSAW and mass sensing via the SH-SAW simultaneously. The purpose of this study is to find an ideal guiding layer and wavelength configuration that can enhance the sensing capability without sacrificing the biofouling removal ability for …

The Smart Dementia Care Project, Dympna O'Sullivan, Jonathan Turner, Ciaran Nugent, Damon Berry, Michael Wilson, Julie Doyle

Articles

No abstract provided.

Spatiotemporal Metabolic Network Models Reveal Complex Autotroph-Heterotroph Biofilm Interactions Governed By Photon Incidences, Poonam Phalak, Hans C. Bernstein, Stephen R. Lindemann, Ryan S. Renslow, Dennis G. Thomas, Michael A. Henson, Hyun-Seob Song

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Autotroph-heterotroph interactions are ubiquitous in natural environment and play a key role in controlling various essential ecosystem functions, such as production and utilization of organic matter, cycling of nitrogen, sulfur, and other chemical elements. Understanding how these biofilm metabolic interactions are constrained in space and time remains challenging because fully predictive models designed for this purpose are currently limited. Toward filling this gap, here we developed community metabolic network models for two autotroph-heterotroph biofilm consortia (termed UCC-A and UCC-O), which share a suite of common heterotrophic members but have a single distinct photoautotrophic cyanobacterium (Phormidesmis priestleyi str. ANA and …

Key To The Species Of Tortanidae Tortanus Occurring In The China Seas, Chang-Tai Shih, Qing-Chao Chen, Yang-Chi Lan, Shih-Hui Hsiao, Chi-Yu Weng

Journal of Marine Science and Technology–Taiwan

No abstract provided.

Key To The Species Of Tharybidae Neoscolecithrix Occurring In The China Seas, Chang-Tai Shih, Qing-Chao Chen, Yang-Chi Lan, Shih-Hui Hsiao, Chi-Yu Weng

Journal of Marine Science and Technology–Taiwan

No abstract provided.

Key To The Species Of Temoridae Temora Occurring In The China Seas, Chang-Tai Shih, Qing-Chao Chen, Yang-Chi Lan, Shih-Hui Hsiao, Chi-Yu Weng

Journal of Marine Science and Technology–Taiwan

No abstract provided.

Key To The Species Of Subeucalanidae Subeucalanus Occurring In The China Seas, Chang-Tai Shih, Qing-Chao Chen, Yang-Chi Lan, Shih-Hui Hsiao, Chi-Yu Weng

Journal of Marine Science and Technology–Taiwan

No abstract provided.

Key To The Species Of Spinocalanidae Spinocalanus Occurring In The China Seas, Chang-Tai Shih, Qing-Chao Chen, Yang-Chi Lan, Shih-Hui Hsiao, Chi-Yu Weng

Journal of Marine Science and Technology–Taiwan

No abstract provided.

Key To The Species Of Spinocalanidae Monacilla Occurring In The China Seas, Chang-Tai Shih, Qing-Chao Chen, Yang-Chi Lan, Shih-Hui Hsiao, Chi-Yu Weng

Journal of Marine Science and Technology–Taiwan

No abstract provided.

Key To The Species Of Scolecitrichidae Scottocalanus Occurring In The China Seas, Chang-Tai Shih, Qing-Chao Chen, Yang-Chi Lan, Shih-Hui Hsiao, Chi-Yu Weng

Journal of Marine Science and Technology–Taiwan

No abstract provided.