Engineering Commons^™

Joining Of Ultra-High Temperature Ceramics To The Same And Refractory Metals Via Fusion Welding, Jecee Jarman

Doctoral Dissertations

"This research focuses on the joining of ultra-high temperature ceramics to either themselves or refractory metals/alloys via fusion welding and the mechanical strength of produced joints. The ceramics studied consisted of compositions within a diboride-carbide-carbide ternary system while metals studied consisted of molybdenum and a molybdenum alloy. SiC-ZrB2-ZrC ceramics on a binary join between pure SiC and the ternary eutectic composition were found to be weldable when SiC content was below ~57.5 vol%. Compositions above 57.5 vol% SiC were unweldable based on pitting and off-gassing behavior. Welded strength of ceramics was ~180-300 MPa in the SiC-ZrB2-ZrC ternary eutectic composition, ~180-220 …

Development Of An Interactive Robot For Overground Physical Human-Robot Interaction, Sambad Regmi

Doctoral Dissertations

"The overground interactive robots are potentially beneficial for humans in various areas, such as overground rehabilitation therapies and robotic interactive assistance. However, it is unclear what the expectations and challenges are for a robot to be physically interactive with a human during overground tasks, such as a robot helping an older adult walk. To develop such a robot, one must first build a clear understanding of how the human motor intent is communicated when interacting with another agent. Specifically, how do humans understand the leader’s intention when being led?

Based on previous works, we hypothesized that humans modulate their arm …

Peritectic Behavior Detection And Prediction In Fe-C-Si-Mn-Al System, Damilola Balogun

Doctoral Dissertations

"The non-uniformity of shell growth in the continuous casting of peritectic steels constitutes a major barrier to the commercial production of many steel grades such as Advanced high strength steels (AHSS), transformation induced plasticity (TRIP) steels, abrasion-resistant steels, advanced armor plate steels, and many newly proposed steel grades that contain high levels of silicon, manganese, and aluminum.

The shell growth non-uniformity experienced in the continuous casting of peritectic steels results in the formation of defects in the as-cast slab and therefore increases the operating risk from cast aborts and breakouts. The ability to predict and avoid peritectic behavior at the …

Strategies To Improve Shrinkage Resistance Of Cement-Based Materials For Extrusion-Based 3d Printing, Kavya Vallurupalli

Doctoral Dissertations

"The main objective of this study is to develop new generation of shrinkage-resistant 3D printable mortar mixtures. To this end, the research work was carried out to: i) identify key material and processing parameters that affect printability; ii) investigate the influence of water-to-cement ratio, superplasticizer dosage, and welan gum content on mortar printability; iii) propose a “printability window” where rheological properties and desorptivity can secure successful printing; iv) investigate effect of shrinkage mitigation materials (expansive agent (EA), pre-saturated lightweight sand (LWS), superabsorbent polymers (SAP), and shrinkage reducing admixture) on printability and shrinkage performance of mortar; and v) evaluate the effect …

Sustainable Face Milling Of Inconel 718 Using Mql And Nanofluids Mql With Vegetable Oil As Base Fluid, Theodore Obumselu Nwoguh

Doctoral Dissertations

"Extreme heat and friction are generated in machining difficult-to-cut metals used in aerospace and nuclear industries leading to poor machinability (high cutting forces, rapid tool wear, shorter tool life, and poor surface integrity). Conventional flood coolant (CEC) used in industry is environmentally unfriendly, hazardous to operators, and unsustainable. These problems motivated this research, which can be mitigated with the use of effective biodegradable cutting fluids, appropriate cutting conditions, and lubrication/cooling strategies. This research provides a sustainable and environmentally friendly replacement to CEC. Firstly, the research characterized three vegetable oils (High Oleic Soybean Oil (HOSO), Low Oleic Soybean Oil (LOSO), and …

Design And Performance Of Self-Consolidating And Thixotropic Ultra-High-Performance Concrete For Infrastructure Construction And Rehabilitation, Le Teng

Doctoral Dissertations

"The objective of this research is to develop two classes of ultra-high-performance concrete (UHPC), one with self-consolidating consistency and the other with improved thixotropy. Tailoring the rheological properties of low yield stress UHPC can improve dispersion and orientation of steel fibers used in the design of UHPC, hence enhancing the tensile and flexural properties. Similarly, improving the thixotropy of UHPC can enable unique performance for the design of thin bonded bridge deck overlay. The research investigated various thixotropy enhancing admixtures to enhance the structural build-up at rest of UHPC. A total of 16 bonded overlay slab specimens were used to …

Advanced Materials And Processes For Gas Separation And Storage Applications, Qasim Mohammed Al-Naddaf

Doctoral Dissertations

"Transition to a clean, renewable energy future requires departure from thermally driven separation processes. In that regard, development of new materials that exhibit high adsorption capacity and selectivity, fast kinetics, and long-term durability under multicomponent conditions is becoming attractive for the applications in clean energy. Moreover, novel sorbents and separation systems that can store gases at normal conditions offer a promising approach for stationary or onboard gas storage. Due to the limitations on the surface area and biding energy restrict commercial materials effectiveness as a potential adsorption and storage material. There is significant interest in the properties of hybrid materials …

Processing To Enable Direct-Write Additive Manufacturing Of Ceramics And Ceramic Composites, Austin Martin

Doctoral Dissertations

"This research focuses on the processing of novel feedstocks for and during direct-write additive manufacturing (AM), specifically the direct ink writing (DIW) and Ceramic On-Demand Extrusion (CODE) manufacturing processes, in order to produce ceramic and ceramic-based composite components. Strongly dispersed, concentrated (φ = 0.42), nanoparticle (d₅₀ ~0.3 µm), zirconia (ZrO₂) pastes were used to print densely filled, large continuous volume (≳ 1 cm³) ceramic components. An elastic shear modulus (G’) of 56,000 Pa and yield stresses between 6 and 10 Pa allowed for printed components of 34.5 mm in height over 115 layers without slumping …

Development And Testing Of A New Air-Assisted Flare System For Low Flow Conditions, Hayder Alhameedi

Doctoral Dissertations

"Flare systems provide a safe, efficient, and reliable way to treat unwanted flammable gases that come from relief devices of various chemical processing equipment to ensure the safety of personnel and equipment. Flare systems are classified according to the assist media type as non-assisted (utility), steam-, air-, and pressure-assisted flares. The assist medium enhances mixing between flare gases and surrounding air and induces more air into the combustion zone. An air-assisted flare system is the preferred flare type in regions where steam is unavailable or is costly to supply or ambient temperatures are too low. The environmental protection agency (EPA) …

Processing And Characterization Of Tini-Based Alloys Fabricated By Laser Aided Manufacturing, Yitao Chen

Doctoral Dissertations

"Laser powder-based directed energy deposition (DED) is a major laser aided additive manufacturing (AM) process for metals. It applies laser energy to deposit metal powders to form 3D metal parts. Apart from manufacturing traditional alloys, DED can also be used to develop advanced alloys with the novel idea of elemental powder mixture feedstock. TiNi-based alloy is a type of shape memory alloy (SMA), a smart material with unique shape memory effects. Using laser powder DED to synthesize TiNi-based SMAs from elemental powder mixture can create more possibilities in new compositions and properties. It can also overcome the limitations of conventional …

Oxidation Of Silicon Carbide And Graphite For High Temperature Gas-Cooled Reactor Applications, Adam Thomas Bratten

Doctoral Dissertations

"This research focuses on the oxidation behavior of silicon carbide and matrix grade graphite, specifically as it pertains to accident scenarios in Gen IV thermal spectrum high temperature gas cooled nuclear reactors. It is imperative to understand the oxidation behavior of such materials to predict their response to off-normal environments and certify their accident tolerance to implement Gen IV reactors. The onset of oxidation temperature of matrix graphite was found to have a strong dependence on the microstructure, and therefore processing parameters, of the materials. The A3-3 type grade contained regions of partially graphitized carbon that were more disordered and …

Surface Modification To Improve The Electrochemical Performance Of Cathode Materials For Lithium-Ion Batteries And Sodium-Ion Batteries, Han Yu

Doctoral Dissertations

"The specific capacity of active materials as well as their cycling stability are the main limiting factors for the performance of lithium-ion batteries (LIBs) and sodium-ion batteries (SIB). Atomic layer deposition (ALD) is considered as a promising surface modification method to enhance the electrochemical performance of active materials for LIBs and SIBs.

In this research, we are committed to using ALD to modify the cathode materials of LIB, by coating different films on the surface of different cathode materials and constructing a stable and favorable interface layer for lithium-ion transport, so that we can protect the active materials from the …

Use Of Cellular Concrete For Air Convection Embankment To Protect Permafrost Foundation In Cold Regions, Hanli Wu

Doctoral Dissertations

"Crushed-rock air convection embankment (ACE) has been used to mitigate thaw settlement, and pavement distresses caused by climatic extremes in permafrost regions for over three decades. However, the desired crushed rocks needed for ACE are not readily available in many areas of interior Alaska. Burdened by the need to ship suitable rocks to remote locations, the cost of constructing an ACE is often prohibitively high, which prevents its wide use in Alaska. An existing cementitious material, cellular concrete, may provide the solution.

This study intends to systematically characterize the heat transfer patterns of ACE and identify the performance benefits of …

Investigating The Interaction Between The Recycled Components And The Asphalt Binders, Plant, Lab, And Field Mixes, Eslam Deef-Allah

Doctoral Dissertations

"Modifying asphalt binders and mixes with recycled components is common practice due to their environmental and economic merits. Literature has indicated that different recycled components interact with (blend with) asphalt differently, ranging from no blending, partial blending, or full blending. The degree of blending between recycled components and virgin asphalt binders (VABs) and the exchanged components impact the performance of modified asphalt binders. However, the nature of the interaction process between the recycled components and the VABs is not fully understood. The primary objective of this study was to explore the interactions between recycled components and VABs. By understanding the …

Theoretical Determination Of The Yield Curve For Unsaturated Soils, Sara Fayek

Doctoral Dissertations

"An important step to developing a good understanding of the behavior of unsaturated soils is to adopt a formal and simple constitutive framework and to conduct high-quality and short-time experiments. Barcelona Basic Model (BBM) was the first elastoplastic constitutive model for unsaturated soils. The yield curve, which separates the elastic region from the elastoplastic region, is an important aspect of constitutive modeling for unsaturated soils. Most concepts for unsaturated soils were developed based upon the results from suction-controlled triaxial (SCTX) tests. Though, the SCTX tests on unsaturated soils are costly, time-consuming, and laborious, and their results are questionable. This study …

Pi And Emi Analysis Of 3d Ic System With Tsvs And Co-Packaged Optics, Wei Zhang

Doctoral Dissertations

"With the demand for developing high-capacity, high-density, high-power optical links for data center communications, co-packaged optics is a promising solution. When the three-dimensional (3D) IC and optic engines are integrated into the same package, the design of such systems in terms of signal integrity, power integrity, and electromagnetic interference will be more challenging.

This first paper mainly focuses on modeling the bias-voltage-dependent, temperature-dependent, and light-intensity-dependent hysteresis behavior of a through-silicon-vias (TSV) structure in 3D IC and analyzing its effect on the power integrity of a system with 3D IC.

This second paper investigates the scaled tendency of the emissions in …

Synergistic Effect Of Shrinkage Mitigating Strategies On Performance Of Fiber-Reinforced Cementitious Composites, Kamran Aghaee

Doctoral Dissertations

"The advantages of using shrinkage mitigating strategies to reduce shrinkage and mitigate cracking of concrete is well documented. However, the benefits and drawbacks of employing multiple strategies have not been explored. The main objective of this study is to provide insights into the mechanisms of using multiple strategies to enhance shrinkage and cracking resistance to promote the properties of high-performance cementitious composites (HPC) designated for infrastructural construction, repair, and 3D printing applications. HPC mixtures were prepared with steel and synthetic macro and microfibers, expansive agent (EA), and shrinkage reducing admixture (SRA) coupled with various curing methods e.g., internal curing using …

Accuracy Improvement Of Cable Harness Modeling & Analytical Modeling Of Multi-Reflections In High-Speed Signal Channels, Muqi Ouyang

Doctoral Dissertations

"Cable harnesses are widely used in modern vehicles to power electric systems locating at different locations throughout the vehicle and to establish signal channels for data communications between these systems. Generally, a cable harness consists of multiple wires and its geometry can be very complicated, making full-wave modeling and simulation approaches computational resource-intensive. To cut down the computational effort, the hybrid multiconductor transmission-line (MTL) method has been developed, and the generalized MTL (GMTL) method and the multiple scattering (MS) method have been developed to improve the accuracy of the hybrid MTL method. In this research, the convergence issue in the …

Multi-Stage Multi-Market Optimal Bidding Strategy In Electricity Markets, Hossein Mehdipourpicha

Doctoral Dissertations

"Restructuring of power industry created the competitive situations for different MPs through designing appropriate electricity markets. Typically, in pool-based electricity markets, MPs submit their offers, and ISO clears the market and notifies MPs of the cleared power amounts and market prices. In this situation, designing an effective bidding strategy for MPs who seek to maximize their profits has thus become one of the crucial yet difficult tasks that still need further exploration. The majority of recent studies overlooked this problem for the purely financial players. Therefore, designing an efficient strategy for virtual bidder in the pool-based electricity markets is studied …

Groundwater Withdrawal Estimation Using Integrated Remote Sensing Products And Machine Learning, Sayantan Majumdar

Doctoral Dissertations

"The rising demands for water, food, and energy primarily driven by the increasing global population constitute a pressing issue worldwide. Therefore, the water-food-energy nexus plays a substantial role in developing globally applicable sustainable solutions. Recent technological advancements, including the earth observation programs using spaceborne remote sensing platforms, have enabled us to monitor various critical components affecting the globe. Groundwater, which comprises the world's 30% freshwater, is one such key component of the global water resources and supplies nearly half of the global drinking water.

Despite groundwater overdraft in many parts of the world, including the United States (US), there are …

Using Computational Methods To Optimize High Heat Flux Component Thermal Performance In Magnetic Confinement Fusion Reactor Research, Monica Gehrig

Doctoral Dissertations

"Heat transfer enhancement by means of internally modified geometries in tubes and channels is an important mechanism to improve the survivability of components in extreme high-heat flux environments. Various features such as ribs and fins are studied using computational fluid dynamics in both uniform and one-sided heating in tubes and rectangular channels respectively to determine the most effective geometries across a variety of different flow and heating conditions. This work examines heat transfer enhancement and rib geometry optimization to support experimental research for nuclear fusion applications. The project begins by designing and analyzing test sections supporting a helium flow loop …

The Effect Of Mass Transport On Deposit Quality In Copper Electrowinning, Joseph Bauer

Doctoral Dissertations

"Roughness and nodulation of copper electrodeposits depend strongly on mass transfer conditions of copper ions to the electrode surface. Mass transfer properties in electrowinning electrolytes were first characterized. The effective diffusivity of cupric ion was measured with a rotating disk electrode in CuSO₄-H₂SO₄ electrolytes at temperatures relevant to electrowinning, with and without additives. Adding 20 mg L^-1 of chloride ion increased the measured diffusion coefficient, but commercial smoothing additives had little effect. An empirical formula to predict cupric diffusivity was generated for later use in mass transport modeling.

Boundary layer thickness information for commercial …

Promoting Distributed Energy Deployment And Diffusion For Sustainable Civil Infrastructure Using Multi-Agent Based Modeling And Quantitative Analytics, Gasser Ali

Doctoral Dissertations

"Distributed Solar Generation (DSG) using small-scale Photo-Voltaic (PV) is an evolving technology with increasingly growing market penetration due to its significant benefits to consumers and broader power systems. DSG is sustainable, provides reliability, and is cost-effective where solar energy is abundant. However, the increasingly growing adoption of DSG creates uncertainties in forecasting electric power demand and market behavior. It also causes concerns of a “utility death spiral”. To this end, the goal of this research is to critically analyze the diffusion and benefits of DSG in the electric power infrastructure as a complex System-of-Systems (SoS). Specifically, this dissertation addresses the …

Development And Application Of Ensemble Machine Learning Algorithms To Enable A Priori, High-Fidelity, And Prompt Predictions And Optimizations Of Complex Materials And Systems, Taihao Han

Doctoral Dissertations

"Complex materials consisting of multiple chemical components/phases have been widely used in different engineering applications that have strict criteria. To optimize the mixture design of complex materials, researchers invest enormous resources in cumbersome experiments. However, due to substantial variations in precursors and processing techniques, it has been challenging to develop theoretical frameworks (i.e., empirical models) that could produce reliable predictions of properties of complex materials. In recent years, scientists have harnessed the power of machine learning (ML) and “Big” data to uncover the underlying mixture design-property correlations and produce high-fidelity predictions of properties of complex materials. The ML models autonomously …

Far-End Crosstalk Modeling And Prediction For High-Speed Pcb Design With Inhomogeneous Dielectric Layers (Idls), Yuanzhuo Liu

Doctoral Dissertations

"Far-end crosstalk (FEXT) noise is a critical factor that affects signal integrity performance in high-speed systems. The FEXT level is sensitive to the inhomogeneity of the dielectric layers in fabricated printed circuit boards (PCB). The stripline is laminated by multiple inhomogeneous dielectric layers (IDL). The dielectric layers of the stripline are laminated with epoxy resin and glass bundles. The dielectric permittivity of the epoxy resin and glass bundles are different, which causes the inhomogeneity of the dielectric layers while also increasing the FEXT magnitude. The dielectric of the microstrip in printed circuit boards (PCB) fabrication usually consists of two layers: …

Optimization Of Energy Storage Scheduling In Electricity Markets, Jian Liu

Doctoral Dissertations

"In the existing literature, merchants' trading actions are usually assumed not to affect market prices; however, a large-scale energy storage merchant’s actions can affect market prices. This work examined two electricity merchant scenarios: one with only energy storage and the other with both energy storage and renewable power plants. We approximated market impact via a linear function of the electricity traded by the merchant. This study began by applying dynamic programming to the optimal economic dispatch policy of electricity merchants and it considered the market impact, physical characteristics of storage systems, and the uncertainty of renewable energy sources. Then, this …

Resistivity Imaging Of Prominent Seepage Pathways In Karst Terrain, Abdullah Hadi Zaid Alhaj

Doctoral Dissertations

"An integrated research approach was conducted to evaluate subsurface karstic conditions in Greene County, southwestern Missouri. Electrical resistivity tomography (ERT) was employed to image anomalously low resistivity zones associated with the presence of seepage pathways that were anthropogenic and/or natural in origin. Techniques including visual inspection (VI), multichannel analysis of surface waves (MASW), borehole control (BC), and aerial imagery (AI) were supplementally used to constrain the ERT data interpretations.

This research addressed six objectives. First, the ERT data interpretations were verified in terms of depth to the top of bedrock, fractures/voids, and moisture changes using the MASW, borehole control, and …

Mobility Analysis And Topology Synthesis Of Compliant Mechanism Using Compliance Number And Pseudo-Rigid-Body Model (Prbm), Pratheek Bagivalu Prasanna

Doctoral Dissertations

"Establishing and understanding the kinematic properties of a compliant mechanism has been a relatively recent endeavor and has proved to be a challenging task. A concept of compliance number was offered earlier; the development of terminologies was emphasized that aided in its determination. It also hypothesized that the compliance number (C) and stored strain energy, or mode shapes, are strongly correlated. This compliance number (C) concept is revisited, and a more lucid interpretation of its significance is provided. A fundamental understanding of the concept of deformation mode shapes in compliant mechanisms is formalized using two distinct categories: (i) segmental and …

Deep Learning-Based Surrogate Models For Post-Earthquake Damage Assessment, Xinzhe Yuan

Doctoral Dissertations

"Seismic damage assessment is a critical step to enhance community resilience in the wake of an earthquake. This study aims to develop deep learning-based surrogate models for widely used fragility curves to achieve more accurate and rapid assessment in practice. These surrogate models are based on artificial neural networks trained from the labelled ground motions whose resulting damage classes on targeted structures are determined by nonlinear time history analyses. The development of various surrogate models is progressed in four phases. In Phase I, the multilayer perceptron (MLP) is used to develop multivariate seismic classifiers with up to 50 hand-crafted intensity …

Nonlinear Meissner Effect In Nb3Sn Coplanar Resonators, Junki Makita, C. Sundahl, Gianluigi Ciovati, C. B. Eom, Alex Gurevich

Physics Faculty Publications

We investigated the nonlinear Meissner effect (NLME) in Nb₃Sn thin-film coplanar resonators by measuring the resonance frequency as a function of a parallel magnetic field at different temperatures. We used low rf power probing in films thinner than the London penetration depth λ(B) to significantly increase the field onset of vortex penetration and measure the NLME under equilibrium conditions. Contrary to the conventional quadratic increase of λ(B) with B expected in s-wave superconductors, we observed a nearly linear increase of the penetration depth with B. We concluded that this behavior of λ(B) is due to weak linked grain …