Engineering Commons^™

Home Energy Management System Considering Effective Demand Response Strategies And Uncertainties, Marcos Tostado-Véliz, Paul Arévalo, Salah Kamel, Hossam Zawbaa, Francisco Jurado

Articles

Nowadays, load serving entities require more active participation from consumers. In this context, demand response programs and home energy management systems play a crucial role in achieving multiple goals such as peak clipping. However, the adoption of demand response initiatives typically has a negative impact on the monetary expenditures of the users. This way, a demand response program should be as effective as possible to make the different goals more easily achievable without compromising the financial requirements of the users. This paper develops a home energy management system that incorporates three novel effective demand response strategies. The effectiveness of the …

Improvement Of Active Distribution Systems With High Penetration Capacities Of Shunt Reactive Compensators And Distributed Generators Using Bald Eagle Search, Ahmad Eid, Salah Kamel, Dr Hossam Zawbaa, Mostafa Dardeer

Articles

This work proposes an intelligent allocation of distributed generation (DG) units and shunt reactive compensators (SRC) with high penetration capacities into distribution systems for power loss mitigation using the Bald Eagle Search (BES) optimization algorithm. The intelligent allocation causes a reduction in voltage variations and enhances the voltage stability of the systems. The SRC units include shunt capacitors (SC), Static Var Compensators (SVC), and Distribution Static Compensators (DSTATCOM), which are determined according to their capacities. The optimization study includes the 33-bus and the 118-bus distribution systems as medium to large systems. Performance parameters, including the reactive power loss, Total Voltage …

Removing Physical Presence Requirements For A Remote And Automated World - Api Controlled Patch Panel For Conformance Testing, Hunter George Wells

Honors Theses and Capstones

Quality assurance test engineers at the UNH-InterOperability Lab must run tests that require driving and monitoring a selection of DC signals. While the number of signals is numerous, there are limited ports on the test equipment, and only a few signals need patching for any given test. The selection of signals may vary between the 209 different tests and must be re-routed frequently. Currently, testers must leave their desk to manually modify the test setup in another room. This posed a considerable issue at the onset of the COVID-19 Pandemic when physical access was not possible. In order to enable …

Development Of A Fluxgate Magnetometer Model, Eleonora Olsmats

Honors Theses and Capstones

As a part of the UNH SWFO-L1 mission to monitor space weather and the sun’s behavior, the fluxgate magnetometer is an important component to measure external magnetic fields. The basic principle of a fluxgate magnetometer is to detect changes in the ambient magnetic field by inducing a magnetic field in a ferromagnetic material via a drive winding. Each magnetometer is unique due to the ferromagnetic properties of the core material which can be seen in the hysteresis loop which is a relationship between the magnetic field strength (H) and the induced magnetic field (B). Measuring the hysteresis of a fluxgate …

Coastal Wave Powered Reverse Osmosis System, Alexander Raymond Charest, Joeseph Daniel Camobreco, Tori Sweet, Sam Williams, Andrew Lepage, Devan Sack, Meagan Wiggin, Chelsea Kimball, Brendan Reagan

Honors Theses and Capstones

Part of the Marine Energy Collegiate Competition (MECC) is the optional Build and Test Challenge where teams are encouraged to build a portion of their proposed solution. After the conducted testing the laboratory results are compared to the simulated and calculated models. For the MECC the University of New Hampshire (UNH) team decided to use a wave energy converter to produce pressurized water. The pressurized water would be filtered through a reverse osmosis membrane to make it potable. Our system uses the power of the ocean waves to move a float up and down in heave motion. This motion drives …

An Examination Of Effective Length In Moment Frames, Connor Stephen Schott

Honors Theses and Capstones

The honors thesis project I have been working on is called An Examination of Effective Length in Moment Frame. When loaded axially in compression columns experience a failure mode in compression that axially loaded members don’t experience in tension. This failure mode, elastic column buckling, doesn’t involve yielding or rupture; the column changes shape and deforms to the side. In order to come up with a solution to this failure mode, Leonhard Euler developed the critical buckling load equation. However, this equation uses an effective length of columns, which is the distance between two points of zero moment, or …

Performance Of An Adaptive Aggregation Mechanism In A Noisy Wlan Downlink Mu-Mimo Channel, Lemlem Kassa, Mark Davis, Jianhua Deng, Jingye Cai

Articles

This paper investigates an adaptive frame aggregation technique in the medium access control (MAC) layer for the Wireless Local Area Network (WALN) downlink Multi-User–Multiple-In Multiple-Out (MU-MIMO) channel. In tackling the challenges of heterogeneous traffic demand among spatial streams, we proposed a new adaptive aggregation algorithm which has a superior performance over the baseline First-in–First-Out (FIFO) scheme in terms of system throughput performance and channel utilization. However, this earlier work does not consider the effects of wireless channel error. In addressing the limitations of this work, this study contributes an enhanced version of the earlier model considering the effect of channel …

Rss-Based Indoor Localization System With Single Base Station, Samir Salem Al-Bawri, Mohammad Tariqul Islam, Mandeep Jit Singh, Mohd Faizal Jamlos, Adam Narbudowicz, Max Ammann, Dominique M.M.P. Schreurs

Articles

The paper proposes an Indoor Localization System (ILS) which uses only one fixed Base Station (BS) with simple non-reconfigurable antennas. The proposed algorithm measures Received Signal Strength (RSS) and maps it to the location in the room by estimating signal strength of a direct line of sight (LOS) signal and signal of the first order reflection from the wall. The algorithm is evaluated through both simulations and empirical measurements in a furnished open space office, sampling 21 different locations in the room. It is demonstrated the system can identify user’s real-time location with a maximum estimation error below 0.7 m …

Information Modelling For Urban Building Energy Simulation—A Taxonomic Review, Avichal Malhotra, Julian Bischof, Alexandru Nichersu, Karl-Heinz Häfele, Johannes Exenberger, Divyanshu Sood, James Allan, Jérôme Frisch, Christoph Van Treeck, James O'Donnell, Gerald Schweiger

Articles

Climate change, increasing emissions and rising global temperatures have gradually affected the way we think about the future of our planet. Urban areas possess significant potential for reducing the energy consumption of the overall energy system. In recent years, there is an increasing number of research initiatives related to Urban Building Energy Modelling (UBEM) that focus on simulation processes and validation techniques. Although input data are crucial for the modelling process as well as for the validity of the results, the availability of input data and associated data formats were not analysed in detail. This paper closes the identified knowledge …

Designing A Robust Decentralized Energy Transactions Framework For Active Prosumers In Peer-To-Peer Local Electricity Markets, Mehdi Mehdinejad, Heidar Ali Shayanfar, Behnam Mohammadi-Ivatloo, Hamed Nafisi

Articles

In this paper, a fully decentralized local energy market based on peer-to-peer(P2P) trading is proposed for small-scale prosumers. In the proposed market, the prosumers are classified as buyers and sellers and can bilaterally engage in energy trading (P2P) with each other. The buyer prosumers are equipped with electrical storage and can participate in a demand response (DR) program while protecting their privacy. In addition to bilateral negotiating with the local sellers, these players can compensate for their energy deficiency from the upstream market as the retail market at hours without local generation. In this paper, the retail market price is …

Heat Transfer And Friction Factor Correlations Development For Double Pass Solar Air Heater Artificially Roughened With Perforated Multi-V Ribs, Varun Pratap Singh, Siddharth Jain, Ashish Karn, Gaurav Dwivedi, Ashwani Kumar, Sachin Mishra, Naveen Kumar Sharma, Hossam Zawbaa, Salah Kamel

Articles

Thermo-hydraulic performance of a Double Pass Parallel Flow Solar Air Heater (DPPFSAH) roughened with perforated multi-V ribs has been studied experimentally in a prior study and the effect of variation in open area ratio and change in relative roughness width has been analysed and reported. The current work builds upon the aforementioned earlier study by discussing in detail the methodology and various steps involved in the development of a correlation for variable parameters with Nusselt number and friction factor for DPPFSAH. The outcomes show that perforations in the multi-V ribs lead to a considerable rise in the Nusselt number, a …

Electrooptic, Pyroelectric And Dielectric Spectroscopic Studies Of Nematic And Twist Bend Nematic Phases Of Achiral Hockey-Shaped Bent-Core Liquid Crystal, Sithara P. Sreenilayam, Neelam Yadav, Yuri Panarin, G. Shanker, J.K. Vij

Articles

Experimental and theoretical investigations of the twist-bend nematic (NTB) phase in liquid crystals have recently received significant attention for reasons of unusual and interesting characteristics of the NTB. Though NTB was predicted to exist for rigid bent-core LCs by Ivan Dozov in 2001, nevertheless it has unambiguously been proven to exist only in a few bent-core systems so far. Here the characteristics of both the nematic (N) and NTB phases are investigated for a hockey shaped achiral rigid bent-core LC, called BCI, in planar and homeotropic aligned cells, using polarizing optical microscopy, electro-optics, pyroelectricity and wide band dielectric spectroscopy. Spontaneous …

Optimal Design Of Photovoltaic, Biomass, Fuel Cell, Hydrogen Tank Units And Electrolyzer Hybrid System For A Remote Area In Egypt, Abd El-Sattar Abd El-Sattar, Salah Kamel, Hamdy M. Sultan, Hossam Zawbaa, Francisco Jurado

Articles

In this paper, a new isolated hybrid system is simulated and analyzed to obtain the optimal sizing and meet the electricity demand with cost improvement for servicing a small remote area with a peak load of 420 kW. The major configuration of this hybrid system is Photovoltaic (PV) modules, Biomass gasifier (BG), Electrolyzer units, Hydrogen Tank units (HT), and Fuel Cell (FC) system. A recent optimization algorithm, namely Mayfly Optimization Algorithm (MOA) is utilized to ensure that all load demand is met at the lowest energy cost (EC) and minimize the greenhouse gas (GHG) emissions of the proposed system. The …

Life-Cycle Assessment Of Non-Domestic Building Stocks: A Meta-Analysis Of Current Modelling Methods, Julian Bischoff, Aidan Duffy

Articles

Building stock models (BSMs) are essential for simulating the contributions of regional and national building sectors to climate change under different policy scenarios, and for identifying pathways to climate change mitigation. To date, BSMs have focused on the operational life-cycle impacts of domestic dwellings; there has been less emphasis either on non-domestic buildings (NDBs) or full life-cycle analysis. This paper provides a first review of the theory and practice of NDB stock modelling which considers life-cycle energy, emissions and costs. A meta-analysis of the literature was undertaken involving a structured search of relevant articles in key scientific repositories. 98 in-scope …

Motion-Aware Vehicle Detection In Driving Videos, Mehmet Kiliçarslan, Tansu Temel

Turkish Journal of Electrical Engineering and Computer Sciences

This paper focuses on vehicle detection based on motion features in driving videos. Long-term motion information can assist in driving scenarios since driving is a complicated and dynamic process. The proposed method is a deep learning based model which processes motion frame image. This image merges both spatial (frame) and temporal (motion) information. Hence, the model jointly detects vehicles and their motion from a single image. The trained model on Toyota Motor Europe Motorway Dataset reaches 83% mean average precision (mAP). Our experiments demonstrate that the proposed method has a higher mAP than a tracking-based model. The proposed method runs …

A Futuristic Approach To Generate Random Bit Sequence Using Dynamic Perturbedchaotic System, Sathya Krishnamoorthi, Premalatha Jayapaul, Vani Rajasekar, Rajesh Kumar Dhanaraj, Celestine Iwendi

Turkish Journal of Electrical Engineering and Computer Sciences

Most of the web applications require security which in turn requires random numbers. Pseudo-random numbers are required with good statistical properties and efficiency. Use of chaotic map to dynamically perturb another chaotic map that generates the random bit output is introduced in this work. Perturbance is introduced to improvise the chaotic behaviour of a base map and increase the periodicity. PRNG with this architecture is devised to generate random bit sequence from initial keyspace. The statistical properties of newly constructed PRNG are tested with NIST SP 800-22 statistical test suite and were shown to have good randomness. To ensure its …

A Simple Dual-Band Quasi-Yagi Antenna With Defected Ground Structures, Göksel Turan, Hayretti̇n Odabaşi

Turkish Journal of Electrical Engineering and Computer Sciences

In this article, a dual-band compact quasi-Yagi antenna with defected ground structure (DGS) is proposed. The proposed antenna has a simple feeding mechanism consists of a microstrip and transmission line. Half of the driver and director elements are printed on the opposite side of the substrate to ensure good coupling between the antenna elements and achieve a stable radiation pattern. The ground plane is modified with one rectangular slot below the microstrip line to form dual-band operation. Also rectangular slots placed on the sides of the ground plane to improve the matching. The proposed antenna works at $f_{1}=3.35$ and $f_{2}=6.15$ …

Pathways Towards An Engineering Baccalaureate Degree - Critical Incidents And Factors Leading Students To Choose Community College: A Phenomenological Study, Joan Zitur Carter

All Graduate Theses, Dissertations, and Other Capstone Projects

Women and underrepresented minorities can help fill the ever-growing demand for engineers in the United States. Quality teaching methods, an understanding of the cognitive aspects of learning, and faculty addressing biases help ensure student success in engineering majors. Accordingly, the community college engineering pathway can help fill the national need for engineers. This phenomenological study sought to describe the experience of students who choose the community college pathway toward a Bachelor of Science degree in Engineering. Thirteen participants were interviewed; all took engineering courses at the same community college, transferred to a four-year engineering university (10 to a R1), and …

Demand Side Management Of Electric Vehicles In Smart Grids: A Survey On Strategies, Challenges, Modeling, And Optimization, Sarthak Mohanty, Subhasis Panda, Shubhranshu Mohan Parida, Pravat Kumar Rout, Binod Kumar Sahu, Mohit Bajaj, Hossam Zawbaa, Nallapaneni Manoj Kumar, Salah Kamel

Articles

The shift of transportation technology from internal combustion engine (ICE) based vehicles to electricvehicles (EVs) in recent times due to their lower emissions, fuel costs, and greater efficiency hasbrought EV technology to the forefront of the electric power distribution systems due to theirability to interact with the grid through vehicle-to-grid (V2G) infrastructure. The greater adoptionof EVs presents an ideal use-case scenario of EVs acting as power dispatch, storage, and ancillaryservice-providing units. This EV aspect can be utilized more in the current smart grid (SG) scenarioby incorporating demand-side management (DSM) through EV integration. The integration of EVswith DSM techniques is hurdled …

Optimization Based On Movable Damped Wave Algorithm For Design Of Photovoltaic/ Wind/ Diesel/ Biomass/ Battery Hybrid Energy Systems, Mohammed Kharrich, Salah Kamel, Mamdouh Abdel-Akher, Ahmad Eid, Hossam Zawbaa, Jonghoon Kim

Articles

The actual energetic situation has several challenges such as pollution, the rarefaction of fossil fuel and the dangers of nuclear. Renewable sources are proposed as a solution and suggested, such as a cost-effectiveness system. The paper deals with the problem of feeding a domestic load with electricity which should respect the ecologies factors, so this work is a design problem of the hybrid renewable energy systems; PV/biomass, PV/diesel/battery, PV/wind/diesel/battery, and wind/diesel/battery to choose the best one of them which feed the load with the lowest cost. The study’s goal is to design a microgrid system by the minimization of the …

Overarching Preventive Sympathetic Tripping Approach In Active Distribution Networks Without Telecommunication Platforms And Additional Protective Devices, Tahereh Dehghani Firouzabadi, Davoud Abootorabi Zarchi, Mohammadreza Mazid, Hadi Safdarkhani, Hamed Nafisi

Articles

Nowadays, distributed generation (DG) has made it possible to generate electricity close to the consumption site, resulting in improved efficiency, less environmental pollution, and higher economic profit. These advantages have led to increased penetration of DGs in the distribution system. Protective devices in a distribution system are set by considering the main substation as the only source for feeding short circuit current. However, with the increased influence of DGs as the second main source of short circuit current in distribution systems the short circuit level changes, which leads to false tripping of protective devices, including overcurrent relays. A sympathetic trip, …

Optimizing Commercial Vehicle Enforcement Investments And Activities To Improve Safety And Increase Revenue Collections, Brian Howell, Jennifer Walton, Andrew Martin

Kentucky Transportation Center Research Report

The Kentucky Transportation Cabinet (KYTC) owns and maintains 14 fixed weigh stations for commercial vehicle enforcement. The Kentucky State Police (KSP) is responsible for staffing these facilities to conduct enforcement, while KYTC is responsible for constructing and maintaining these facilities. Like many states, Kentucky has experienced a decline of enforcement personnel to operate weigh stations limiting its ability to conduct inspections for safety enforcement and revenue collection. This study analyzes three CMV facilities for their impact on safety enforcement and revenue collection and determines their viability for potential replacement. All three existing weigh stations in Hardin, Fulton, and Henderson counties …

Evaluation Of Novel Preformed Particle Gels For Conformance Control And Acid Stimulation Through Core Flooding Tests, Shuda Zhao

Doctoral Dissertations

"Acid stimulation and conformance control are two major methods to improve oil production. This study systematically evaluates two newly developed gels: Degradable Preformed Particle Gel (DPPG) and Re-crosslinkable Preformed Polymer Gel (RPPG). DPPG is designed to be a temporary plugging agent for acid stimulation and can self-degrade into a water-like fluid. RPPG is designed for reservoir sweep efficiency improvement and can re-crosslink to each other and form an immobile bulk gel after being placed in fractures or fracture-like conduits.

For DPPG, this study evaluates the effect of monomer, crosslinker, and initiator concentration on the swelling and degradation performance. Results show …

Tractor Test 2252: John Deere 9rx 540, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Tractor Test 2251: John Deere 9rx 490, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Tractor Test 2250: John Deere 9rt 570, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Tractor Test 2249: John Deere 9rt 520, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Tractor Test 2248: John Deere 9rt 470, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2261: John Deere 6140m, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2259: John Deere 9r 440, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …