Engineering Commons^™

Sustainability And Health Impacts Of Pulse Crops In The United States Using Life Cycle Assessment, Prathamesh A. Bandekar

Graduate Theses and Dissertations

Environmental sustainability and human health impact of pulses produced and consumed in the United States was assessed using life cycle assessment (LCA). The study included three objectives 1) to estimate environmental impact of current production and consumption practices in the United States using attributional LCA; 2) to estimate environmental and human health impact of iso-caloric diets containing varying amounts of pulses using Hybrid-LCA and Combined Nutritional and Environmental-LCA (CONE-LCA); and 3) to estimate environmental impact of increased demand for pulses using consequential LCA. Scope of the study varied for each objective with system boundary encompassing cradle-to-grave activities for objective 1 …

Developing Distributed Real-Time Hybrid Simulation For Dynamic Response Evaluation Of Floating Wind Turbine, Hezha Lutfalla Sadraddin

Dissertations

Floating wind turbine (FWT) has a significant role in producing clean and sustainable energy in unlimited spaces with more steady wind and less cost. The design, construction, and safe operation of FWTs require a deep understanding of their dynamic responses under combined aerodynamic and hydrodynamic loads. Conventional FWT model experiments utilize wave tanks and wind tunnels. However, laboratory size and capacity and the scaling conflicts between the Froude and the Reynold numbers in these coupled wind-wave loading tests impose challenges to replicate dynamic responses of FWT. Alternatively, real-time hybrid simulation (RTHS), which combines numerical simulation and physical experiment of FWT …

Modeling, Control And Estimation Of Reconfigurable Cable Driven Parallel Robots, Adhiti Raman Thothathri

All Dissertations

The motivation for this thesis was to develop a cable-driven parallel robot (CDPR) as part of a two-part robotic device for concrete 3D printing. This research addresses specific research questions in this domain, chiefly, to present advantages offered by the addition of kinematic redundancies to CDPRs. Due to the natural actuation redundancy present in a fully constrained CDPR, the addition of internal mobility offers complex challenges in modeling and control that are not often encountered in literature.

This work presents a systematic analysis of modeling such kinematic redundancies through the application of reciprocal screw theory (RST) and Lie algebra while …

The Effects Of Virtual Reality On Mental Health Software User Satisfaction And Retention, William Hooten

Honors Theses

Mental health issues have become increasingly important in today's society. With that being said, researchers and consumers are looking for new ways to manage and treat mental health using new technologies in labs and the consumer space. This innovation has led to the presence of mobile self-help mental health applications, applications for peoples’ phones that are used to manage symptoms of mental health problems, such as depression and anxiety, track goals, meditate, and more. However, mobile mental health applications, and mobile applications in general, have a problem concerning user satisfaction and overall user retention – studies have shown that 95% …

Tree Climbing Limb Saw, Andrew E. Bray, Parker Tenney, Drew M. Robles, Aimee T. Chiem

Mechanical Engineering

This document is the comprehensive report for the Tree Climbing Limb Saw Senior Project. The purpose of the Tree Climbing Limb Saw project, completed by mechanical engineers Andrew Bray, Aimee Chiem, Drew Robles, and Parker Tenney, is to remove low-hanging branches (<15 >ft) to prevent forest fires from travelling up into the canopy, where wind can carry embers for miles. An RC car was heavily modified to create a solution for this problem. A chainsaw was also mounted to deal with the cutting part of the problem. Creating a project which aims to solve this problem is a great step …

The Role Of Generative Adversarial Networks In Bioimage Analysis And Computational Diagnostics., Ahmed Naglah

Electronic Theses and Dissertations

Computational technologies can contribute to the modeling and simulation of the biological environments and activities towards achieving better interpretations, analysis, and understanding. With the emergence of digital pathology, we can observe an increasing demand for more innovative, effective, and efficient computational models. Under the umbrella of artificial intelligence, deep learning mimics the brain’s way in learn complex relationships through data and experiences. In the field of bioimage analysis, models usually comprise discriminative approaches such as classification and segmentation tasks. In this thesis, we study how we can use generative AI models to improve bioimage analysis tasks using Generative Adversarial Networks …

Models And Algorithms For Trauma Network Design., Sagarkumar Dhirubhai Hirpara

Electronic Theses and Dissertations

Trauma continues to be the leading cause of death and disability in the US for people aged 44 and under, making it a major public health problem. The geographical maldistribution of Trauma Centers (TCs), and the resulting higher access time to the nearest TC, has been shown to impact trauma patient safety and increase disability or mortality. State governments often design a trauma network to provide prompt and definitive care to their citizens. However, this process is mainly manual and experience-based and often leads to a suboptimal network in terms of patient safety and resource utilization. This dissertation fills important …

Development Of An Excel Model To Evaluate The Stability Of Slopes, Bradley Davis

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

This objective of this study is to determine a method or tool for taking given slope stability parameters and quickly and effectively determining the factor of safety against sliding of fully softened slopes. This study evaluates the effects of soil and geometric parameters of common slopes, and models these properties in a hypothetical model. The methodology is based on a parametric analysis using the Spencer’s Method of Slices limit equilibrium analysis used in the computer program Slide2. A parametric analysis is performed to determine which soil and/or geometric properties have a high influence on slope stability. The parametric analysis is …

Using Reinforcement Learning To Improve Network Reliability Through Optimal Resource Allocation, Henley Wells

Graduate Theses and Dissertations

Networks provide a variety of critical services to society (e.g. power grid, telecommunication, water, transportation) but are prone to disruption. With this motivation, we study a sequential decision problem in which an initial network is improved over time (e.g., by adding or increasing the reliability of edges) and rewards are gained over time as a function of the network’s all-terminal reliability. The actions during each time period are limited due to availability of resources such as time, money, or labor. To solve this problem, we utilized a Deep Reinforcement Learning (DRL) approach implemented within OpenAI-Gym using Stable Baselines. A Proximal …

The Deflection And Heat Transfer Analysis Of Injection Mold Cavity With Sla Cooling Channel Insert, Olumide Temidayo Aladesiun

Theses and Dissertations

Fast cooling in injection molding is the critical in the process economy. Among many different cooling channel designs available, conformal cooling offers the best and the most efficient cooling. However, limited awareness, accessibility, complexity, cost, knowledge, and experience limit the use of conformal cooling channels to be used into the mold in a molding process.

Typically, SLM(Selective Laser Melting) method is used to create cavity inserts with conformal cooling channels, however, due to the difficulties listed above, applications of conformal cooling channels are very limited. For an inexpensive alternative SLA (Stereolithography Apparatus) can print cavity inserts with conformal cooling channels. …

Fabrication And Characterization Of Force Spun Polymeric Nanofiber For Drug Delivery And Tissue Engineering Applications, Salahuddin Ahmed

Theses and Dissertations

This study focuses on the development and characterization of polymeric nanofiber for drug delivery and tissue engineering applications. In this study, poly(lactic-co-glycolic) acid (PLGA), Poly-vinyl alcohol (PVA), and Pullulan(PL) were used as the base polymers to develop the nanofiber. Bioactive components Oleanolic acid(OA), Oxymatrine(OM), and Salvianolic Acid(SA) were incorporated in PLGA, PVA, and PL, respectively, via solution mixing. The nano fiber systems were developed using the Forcespinning® method. Morphological, thermo-physical, and biological properties of the fiber mats were analyzed. The composite fiber system containing OA showed a very high drug loading efficiency. The composite fiber system containing high concentration of …

Schematic Design And Peer Review Of Gayaza Medical Center And Walk-In Clinic, Abigail Coffing, Alexis Buhr

Architectural Engineering

This report outlines the structural portion of the work done for the Gayaza Medical Center in Kampala, Uganda. This project was funded by HIINGA, an impact fund doing work in Eastern Africa, who tasked an interdisciplinary group of Cal Poly students with developing a preliminary design for the the medical center. The team consisted of Annebel van der Meulen (architecture), Abigail Coffing and Alexis Buhr (structural), and Arley Landis and Brett Shank (construction management). After completing the initial design, the structural team at Cal Poly rejoined the project the following quarter to do a peer analysis of the finalized structural …

Scan4façade: Automated As-Is Façade Modeling Of Historic High-Rise Buildings Using Drones And Ai, Yuhan Jiang, Sisi Han, Yong Bai

Civil and Environmental Engineering Faculty Research and Publications

This paper presents an automated as-is façade modeling method for existing and historic high-rise buildings, named Scan4Façade. To begin with, a camera drone with a spiral path is employed to capture building exterior images, and photogrammetry is used to conduct three-dimensional (3D) reconstruction and create mesh models for the scanned building façades. High-resolution façade orthoimages are then generated from mesh models and pixelwise segmented by an artificial intelligence (AI) model named U-net. A combined data augmentation strategy, including random flipping, rotation, resizing, perspective transformation, and color adjustment, is proposed for model training with a limited number of labels. As …

Modeling, Verification, And Simulation Of A Uav Swarm Consensus Protocol, Rohit Martin Menghani

Theses and Dissertations

Unmanned Aerial Vehicles (UAVs), particularly electrically powered multi-rotors, are becoming increasingly popular in the entertainment, transportation, logistics, and military sectors. One of the main drawbacks presented by these vehicles at the time of writing is the limited range achieved as a consequence of the limits of battery technology. One common method used to overcome such limitations, is the use of multiple vehicles in cooperation to achieve a certain goal. This application of UAVs is called swarming, where multiple agents can coordinate their actions to fly in a certain formation, to access a certain challenging area, or to fly further. As …

Evaluating Pedestrian Service Of The New Super Diverging Diamond Interchange On Three Case Study Sites In Denver, Colorado, Muhammad Tahmidul Haq, Amirarsalan Mehrara Molan, Khaled Ksaibati

Faculty and Student Publications

Ensuring safe and comfortable conditions for pedestrians necessitates specific strategies at intersections and service interchanges where traffic and pedestrians interact in complex ways with other modes of transportation. This study aims to investigate pedestrian performance at the new Super Diverging Diamond Interchange (Super DDI) using real-world locations (i.e., I-225 and Mississippi Ave, I-25 and 120th Ave, and I-25 and Hampden Ave in Denver, Colorado). Three alternative designs, typical DDI, and two versions of Super DDI were considered to make a reasonable comparison with the existing Conventional Diamond Interchange (CDI). A comprehensive series of simulation models (192 scenarios with 960 runs) …

An Exploration Into The Design Of A Portable Music Player For People With Alzheimer’S And Dementia, Jaxon V. Silva

Liberal Arts and Engineering Studies

An exploration into the design of a portable music player for people with Alzheimer's and dementia.

Novelty Ice Cream Assembly Prototype, Mason Sylvester, Logan Williamson, Alvaro Martinez, Adin Gilman-Cohen

Mechanical Engineering

Cool Beans USA is a novelty ice cream startup company founded by Keith Zachow. In the winter of 2022, our team began working with Mr. Zachow to develop a machine to automate parts of the production process for his product. This product consists of two hemispherical ice-cream cone shell halves filled with soft serve ice cream and pressed together. The assembled pods are around the size and shape of a small walnut and are intended to be sold in stores as a frozen finger food. At the time of project inception, this product was in its early stages and was …

Rotating Backing Brush, Caleb Savard, David Dalal, Max Allred, Mathis Weyrich

Mechanical Engineering

In the final steps of GAF’s shingle production process, small asphalt particles called fines are applied. Some fines adhere well to the shingle sheet, while others temporarily stick only to fall off the sheet further down the manufacturing line. As a result, the shingle plant floor is covered in fines that have fallen due to vibrations and gravity. The technicians and engineers at GAF want a cleaner working environment and to potentially reuse the loose fines. We are a senior project team that solved this problem by designing a system to remove and collect loose fines. In this document, the …

Baby Soothing Device, Grace Kalene Mekrut, Matteo Gozzini, Miles Angel Ibarra, Christian Joel Roberts

Mechanical Engineering

This document is the official final design review for the Baby Soothing Device. This product is intended to help families sleep throughout the night by allowing a baby to be soothed back to sleep without constant and direct parental interaction. It is maintained by Mechanical Engineering students at California Polytechnic State University, San Luis Obispo for Dustin Yoder, the project sponsor. The purpose of this document is to present the design process from ideation to finished design in great enough detail that its manufacturing procedure may be replicated if desired. This document further explains all the research, testing, and benchmarks …

The Bridge Newsletter Winter 2022, Missouri University Of Science And Technology

The Bridge Newsletter

-Missouri S&T CO2 research is rock solid
-Bringing circular economy to construction projects
-Ph.D. graduate wins Fellowship for solar farm protection research
-Rockne presents 2022 Mathes Lecture on ways to evolve engineering education
-Missouri S&T Ph.D. graduate wins $70,000 Laegeler Fellowship for solar farm protection research

A Qualitative Multi-Disciplinary Analysis Of Employers’ Technology Competency Perceptions For Graduates Readiness To The Workforce, Marcel Maghiar, Christopher M. Brown

Civil Engineering & Construction: Faculty Publications

To fully prepare college graduates to function competently and productively in their career, it is important to examine employers’ views of technology competency and graduates’ readiness. Using a qualitative approach by interviewing employers in South-eastern United States across a range of fields, the authors describe the major functions and dimensions of technology competency, compare similarities and differences across the disciplines, and integrate the results to inform theory and pedagogy. The main purpose of this research is to investigate how well new graduates from selected disciplines can transfer technological skills, how they learned and/or used these skills during their program of …

Importance Of Light Activation For Plant Cryptochrome And Antibacterial Drug Delivery Strategies, Merfat Ahmed Hammad

Theses and Dissertations

The goal of this project is to investigate the benefits of applying light in different systems. In the first part, the magnetoreception process that occurs in the light activated cryptochrome of Arabidopsis Thaliana was investigated. In the second part, photo-carbon monoxide releasing molecules (photo-CORMs) were investigated for their antibacterial effect to develop biomedical strategies. Overall, this has been achieved in three different studies. The first study investigated if the forward lightdriven reaction is involved in the magnetoreception process or not in cryptochrome (CRY). To accomplish this, the plant seedlings were tested for 90 minutes as follows: 5 minutes in the …

Compact Electrospray Propulsion Systems For Small Form-Factor Satellites: An Orbital Performance Survey & Platform Design, Alberto Meza

Open Access Theses & Dissertations

Over the past decades, small form-factor satellites such as CubeSats have remained as one of the most accessible platforms to reach space for universities, research institutions, private and governmental entities to perform a wide range of missions. This paper presents a survey into the design and implementation of an electrospray rail thruster, to be integrated to the CubeSat platform. The design investigated features propellant tanks for each individual thruster embedded inside the rail of a standard 1U CubeSat. The capabilities of utilizing the electrospray thruster as an attitude & determination control system was also investigated in which, a pointing accuracy …

Influence Evaluation On Near-Road Concentrations Of Pm2.5 During Covid-19 Pandemic, Marcos Alan Banda Morales

Open Access Theses & Dissertations

SARS-CoV-2, also known as COVID-19, was discovered in Wuhan, China in late 2019and spread rapidly worldwide in 2020. The COVID-19 pandemic and its quarantine periods influenced the number of people using their vehicles and the number of miles traveled, which correspondingly influenced the air quality of urban areas. The influence of the restrictions caused by the quarantine period on air quality differs from location to location. Previous research accounted for countries, but no research was done at the state level individually. This research attempts to evaluate the transportation-related air quality during the COVID-19 pandemic period using data from the Texas …

Optimized Learning Using Fuzzy-Inference-Assisted Algorithms For Deep Learning, Miroslava Barua

Open Access Theses & Dissertations

For years, researchers in Artificial Intelligence (AI) and Deep Learning (DL) observed that performance of a Deep Learning Network (DLN) could be improved by using larger and larger datasets coupled with complex network architectures. Although these strategies yield remarkable results, they have limits, dictated by data quantity and quality, rising costs by the increased computational power, or, more frequently, by long training times on networks that are very large. Training DLN requires laborious work involving multiple layers of densely connected neurons, updates to millions of network parameters, while potentially iterating thousands of times through millions of entries in a big …

Processes & Toolchain For Automation Of Hybrid Direct-Write 3d Printing, Gilbert Thomas Carranza

Open Access Theses & Dissertations

Hybrid 3D printing has evolved from a means to rapidly prototype devices to a fully viable means of manufacturing final products. In particular, electronic and electromagnetic devices have been a focus of hybrid 3D printing multi material structures. However, while the hardware capabilities have been around for years, the software capabilities have only begun to catch up. A process and toolchain for hybrid 3D printing is critically needed.This work details a process and toolchain for hybrid 3D printing metal dielectric structures. In it, a basic slicing algorithm is shown along with off-axis printing and conformal printing for arbitrary curvatures. These …

Transportation Asset Management For The Electric Road System, Kamalen Maria Santos Diaz

Open Access Theses & Dissertations

Electric road systems (ERS) have been presented as a new solution towards a sustainable transportation future, fueling the widespread adoption of electric vehicles by eliminating range anxiety, reducing battery size, and being regional friendly. These systems consist of four components: electric power supply, roads, vehicles, and operations. Much of the early research conducted on ERS has been on how to initially construct these systems by focusing on the first three components, however, there is limited knowledge on how ERS will impact traditional road operations after the systems are in place. Transportation Asset Management (TAM), a major focus within the transportation …

Direct Ink Write And Thermomechanical Characterization Of Thermoset Composites, Sergio Dante Favela

Open Access Theses & Dissertations

This research will be divided into two sections. The first section discusses direct ink writing and thermomechanical characterization for thermoset composites. The thermoset ink is prepared with fillers aiding the printing process by modifying the rheology of the ink and geometry retention by allowing for the part to have an initial UV cure step. Three specimen formulations with different weight percentages were printed by material extrusion in the shape of tensile specimens following ASTM standard D638 to characterize the mechanical properties at room temperature, 100â?? and 200â??. Furthermore, the ink resin was characterized through DSC, TGA, and rheology testing. The …

Infiltration-Controlled Combustion Of Lithium And Magnesium Powders And Reactions Of Lithium With Oxygen And Carbon Dioxide, Kevin Samuel Estala Rodriguez

Open Access Theses & Dissertations

Chemical heat integrated power systems are of great interest for space missions where solar energy, nuclear energy, and batteries are not available or are not practical to use. A new concept of a power system is a metal combustor coupled with a chemical oxygen generator, where the generated oxygen infiltrates through the metal powder or combustion products. The combustion of lithium and magnesium powders under these conditions has not been studied yet. The present work investigates combustion of magnesium powder and stabilized lithium metal powder (SLMP) ignited by a laser inside a closed chamber filled with O2 or CO2. It …

Engineering 3d Bioprinted Cardiac Spheroidal Droplets With Cardiomyocytes And Cardiac Fibroblasts For Tissue Engineering And Drug Cytotoxicity Studies, Raven El Khoury

Open Access Theses & Dissertations

Engineering is the supreme human endeavor that involves harnessing the scientific understanding of the natural world to design and invent objects to improve the society around us. Biomedical engineering is the implementation of concepts acquired from engineering in biology and medicine that aims to improve human health through the integration of engineering with biomedical sciences. The mission of a biomedical engineer is to develop technologies that help advance the quality of peopleâ??s health using various tools and materials with one passion and goal: making the patient's life longer and easier. Tissue engineering is developed from the field of biomaterials and …