Engineering Commons^™

The Influence Of Acidizing On Propped Fractures For Productivity Enhancement: Eagle Ford Laboratory Study, Mohsen Farrokhrouz, Abbas Taheri, Stefan Iglauer, Alireza Keshavarz

Research outputs 2022 to 2026

Hydraulic fracturing of tight formations and placing proppants within induced fractures are commonly performed in unconventional shale reservoirs all over the world, especially in North America. However, the overall recovery of these oil and gas resources is very low and hence, production enhancement is inevitable. This study investigated the acidizing of propped fractures as a recovery enhancement method in Eagle Ford shale samples. Experiments were designed using sample slabs having proppants between them. Differing parameters were examined to optimize the fracture conductivity through acidizing. For a range of confining pressures, the fracture conductivity was maximized by minimizing the proppant embedment. …

Shock Wave Formation From Head-On Collision Of Two Subsonic Vortex Rings, Rachel L. Bauer, Cody J. Thomas, Everett V.P. Baker, Emily M. Johnson, Kelly R. Williams, Martin J. Langenderfer, Catherine E. Johnson

Mining Engineering Faculty Research & Creative Works

Vortex ring collisions have attracted intense interest in both water and air studies (Baird in Proc R Soc Lond Ser Math Phys Sci 409:59-65, 1987, Poudel et al. in Phys Fluids 33:096105, 2021, Lim and Nickels in Nature 357:225, 1992, New et al. in Exp Fluids 57:109, 2016, Suzuki et al. in Geophys Res Lett 34, 2007, Yan et al. in J Fluids Eng 140:054502, 2018, New et al. in J Fluid Mech 899, 2020, Cheng et al. in Phys Fluids 31:067107, 2019, Hernández and Reyes in 29:103604, 2017, Mishra et al. in Phys Rev Fluids, 2021, Zednikova et al. …

Comparison Of Fuzzy And Neural Network Computing Techniques For Performance Prediction Of An Industrial Copper Flotation Circuit, Ivana Jovanović, Fardis Nakhaei, Daniel Kržanović, Vesna Conić, Daniela Urošević

Mining Engineering Faculty Research & Creative Works

This paper presents the development and validation of five different soft computing methods for flotation performance prediction: (1) two models based on fuzzy logic (Mamdani and Takagi-Sugeno fuzzy inference system) and (2) three models based on artificial neural networks. Copper content in the ore feed, collector dosage in the rougher and the scavenger flotation circuits, slurry pH in the rougher flotation circuit and frother consumption were selected as input parameters to estimate the copper grade and recovery of final concentrate, as well as the copper content in the final tailings of the flotation plant. The training and evaluation of the …

Dendrimer-Based Drug Delivery Systems: History, Challenges, And Latest Developments, Juan Wang, Boxuan Li, Li Qiu, Xin Qiao, Hu Yang

Chemical and Biochemical Engineering Faculty Research & Creative Works

Since the first dendrimer was reported in 1978 by Fritz Vögtle, dendrimer research has grown exponentially, from synthesis to application in the past four decades. The distinct structure characteristics of dendrimers include nanoscopic size, multi-functionalized surface, high branching, cavernous interior, and so on, making dendrimers themselves ideal drug delivery vehicles. This mini review article provides a brief overview of dendrimer's history and properties and the latest developments of dendrimers as drug delivery systems. This review focuses on the latest progress in the applications of dendrimers as drug and gene carriers, including 1) active drug release strategies to dissociate drug/gene from …

Post-Translational Modifications And Age-Related Hearing Loss, Parveen Bazard, Jennifer Pineros, Alejandro A. Acosta, Mark Thivierge, Lauren R. Paganella, Samuel Zucker, Freyda L. Mannering, Shrikar Modukuri, Xiaoxia Zhu, Robert D. Frisina, Bo Ding

Chemical and Biochemical Engineering Faculty Research & Creative Works

Post-translational modifications (PTMs) affect nearly all systems of the human body due to their role in protein synthesis and functionality. These reversible and irreversible modifications control the structure, localization, activity, and properties of proteins. For this reason, PTMs are essential in regulating cellular processes and maintaining homeostasis. Diseases such as Alzheimer's, cardiovascular disease, diabetes, cancer, and many others have been linked to dysfunctions of PTMs. Recent research has also shown that irregularities in PTMs can be linked to hearing loss, including age-related hearing loss (ARHL) – the number one communication disorder and one of the top neurodegenerative diseases in our …

Natural 2d Layered Mineral Cannizzarite With Anisotropic Optical Responses, Arindam Dasgupta, Xiaodong Yang, Jie Gao

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Cannizzarite is a naturally occurring mineral formed by van der Waals (vdW) stacking of alternating layers of PbS-like and Bi2S3-like two-dimensional (2D) materials. Although the PbS-type and Bi2S3-type 2D material layers are structurally isotropic individually, the forced commensuration between these two types of layers while forming the heterostructure of cannizzarite induces strong structural anisotropy. Here we demonstrate the mechanical exfoliation of natural cannizzarite mineral to obtain thin vdW heterostructures of PbS-type and Bi2S3-type atomic layers. The structural anisotropy induced anisotropic optical properties of thin cannizzarite flakes are explored through angle-resolved polarized Raman scattering, linear dichroism, and polarization-dependent anisotropic third-harmonic generation. …

Project Management And Systems Engineering Framework For Educational Cubesat Missions, Bailey Garrett

Master's Theses

The rising complexity of CubeSat missions and the unique challenges faced by educational CubeSat programs lead to high rates of mission failure. Implementing project management and systems engineering practices can alleviate these challenges and improve mission success rates for educational CubeSat developers. However, existing project management and systems engineering resources are too cumbersome and often assume the student has a base-level understanding of project management and systems engineering fundamentals. A new universal project management and systems engineering framework was created and tailored specifically to the needs of an educational CubeSat mission. The framework was designed to accommodate first-time CubeSat developers, …

Identifying And Minimizing Underspecification In Breast Cancer Subtyping, Jonathan Cheuk-Kiu Tang

Master's Theses

In the realm of biomedical technology, both accuracy and consistency are crucial to the development and deployment of these tools. While accuracy is easy to measure, consistency metrics are not so simple to measure, especially in the scope of biomedicine where prediction consistency can be difficult to achieve. Typically, biomedical datasets contain a significantly larger amount of features compared to the amount of samples, which goes against ordinary data mining practices. As a result, predictive models may fail to find valid pathways for prediction during training on such datasets. This concept is known as underspecification.

Underspecification has been more accepted …

A Design Of A Digital Lockout Tagout System With Machine Learning, Brandon H. Chen

Master's Theses

Lockout Tagout (LOTO) is a safety procedure instated by the Occupational Safety and Health Administration (OSHA) when doing maintenance on dangerous machinery and hazardous power sources. In this procedure, authorized workers shut off the machinery and use physical locks and tags to prevent operation during maintenance. LOTO has been the industry standard for 32 years since it was instantiated, being used in many different industries such as industrial work, mining, and agriculture. However, LOTO is not without its issues. The LOTO procedure requires employees to be trained and is prone to human error. As well, there is a clash between …

Design Of A System To Investigate The Relationship Between Feedback And Delivery Medium For A Novel Motor Task, Ashley Humpal

Master's Theses

Stroke is a chronic, lifelong illness, and full recovery requires continuous physical and cognitive rehabilitation. Such long-term rehabilitation is cost-prohibitive; however an approach to providing long-term therapy that has recently gained traction is the use of socially assistive agent (SAA) systems. These systems make use of non-contact communication devices and can be used to guide people through a variety of rehabilitative tasks. They have the potential supplement current rehabilitation practices by providing motivation during intense exercises, and can extend the reach of the therapist into remote and home settings.

Though SAA systems have been used in a variety of rehabilitative …

Effects Of Atomic Oxygen On Outgassing Of Silicone Materials, Samuel Westrick

Master's Theses

An important consideration for spacecraft material selection is the space environment that the spacecraft will be operating in. Two features of the space environment that drive material selection are material outgassing and the presence of atomic oxygen in low Earth orbit (LEO). Materials that are considered for use in space are tested to be able to understand how they’ll outgas on orbit and how they’ll respond to interactions with atomic oxygen. However, testing to understand how atomic oxygen interaction with a material will affect how the material will outgas is rare and not standardized. This thesis used a vacuum chamber …

A Study On The Effects Of Cementless Total Knee Arthroscopy Implants' Surface Morphology With Finite Element Analysis, Peter Hunt

Master's Theses

Total knee arthroscopy is one of the most performed and most successful orthopedic surgeries, with nearly a million procedures performed in 2020 in the United States alone. Due to changing patient demographics, the use of cementless fixation for implant stability is becoming more prevalent amongst recipients. Cementless implants rely on the surface morphology of a porous coating to bond implant to bone; the quality of this bond is dependent on an interference fit and the roughness, or coefficient of friction, between implant and bone. Stress shielding is a comparison of the properties in implanted bone to natural bone; it is …

Biodegradation Of Methyl Tert-Butyl Ether And Tert-Butyl Alcohol Using Bioaugmentation With Biowish® Aqua, Elizabeth Villanueva

Master's Theses

Aqua, a commercial product manufactured by BiOWiSH® Technologies, was utilized in this research to study its effectiveness to biodegrade methyl tert-butyl ether (MTBE) and tert-butyl alcohol (TBA). Microcosms containing varying concentrations of MTBE and TBA as well as a growth media and mineral salt solution were examined. Analytical instrumentation used in this study included the use of a gas chromatograph-mass spectrometer (GC/MS) to determine concentrations of MTBE and TBA and a spectrophotometer to extrapolate approximate active biomass concentrations in each experiment. Four different environmental conditions were tested for both MTBE and TBA. The environmental conditions tested for each contaminant included: …

Implementation Of Self Diving Car To Assist Physically Challenged People By Analyzing Eeg Signals, Santhosh Kumar, Meghana S, Shobha Airaddi, Gagana P, Advithi M J

Manipal Journal of Science and Technology

The modern technology which is meant to provide communication between our brain and the car is BCI (Brain computer interface). Its goal is to help persons who are disabled or have trouble moving due to muscle cramps. It uses an EEG (Electroencephalogram) headset to record data, classifies and demonstrate the set of data on the hardware and attain required commands on the robotic car reached from the given order. The data is moved through a Zigbee module in that period Arduino will executes the commands. This interfacing techniques can be used to unravel brain activity into commands to control outer …

Iot-Based Alert System For Geriatric, Vaibhav Meshram Dr, Meghana P V N, R Sahana, Sai Lakshmi Lasya V, Shreya S Reddy

Manipal Journal of Science and Technology

No abstract provided.

Simulation Of Building Interior With Lighting And Window Blind Control, Susan G. Varghese Dr.

Manipal Journal of Science and Technology

The lighting system plays a significant role in our daily lives. Almost every building consists of different lighting systems based on the application. A good lighting design requires a control system that ensures the right amount of light is available where and when it is needed; this also minimizes the energy consumption of lighting installations. This simulation-assisted study investigated the energy and cost analysis of a three-storey building. Here we considered daylight controls using window blinds and artificial light integration with zone control to dim the luminaire with available daylight using sensors. The main focus while choosing classroom lighting for …

Iot-Based Smart Environment System, Soumya R

Manipal Journal of Science and Technology

No abstract provided.

A Simple Technique To Obtain The Response Of A Structure Considering Soil-Structure Interaction (Ssi), Smit Kamal

Manipal Journal of Science and Technology

In the conventional analysis of structures, the effect of soil-structure interaction (SSI) is generally neglected. Analysis of the structures without considering the effect of SSI may not be a realistic approach for all the cases particularly when structures are subjected to forces due to earthquakes. One of the limitations of SSI consideration in the analysis is due to the complexity involved in such analysis and this is the main reason for neglecting SSI in the analysis. In this paper, an alternative method for obtaining a structure response that is similar to a structure taking SSI is proposed. In this approach, …

Project Selection In Facility And Infrastructure Maintenance Organizations, Bayram M. Kurbanov

Theses and Dissertations

The current Air Force Civil Engineer Center (AFCEC) built infrastructure Facility Sustainment Restoration and Modernization (FSRM) portfolio management methodology results in an unbalanced project portfolio. The consequence of this unbalance is that majority of the funding goes towards buildings on the flightline and Facility Support Services activities do not get adequate funding which leads to further deterioration of those facilities. This research investigates whether decision support framework based on Value-Focused Thinking (VFT) process yields better project selection outcomes for facility and infrastructure maintenance organizations. To accomplish that, the investigation focuses on understanding current AFCEC decision support methodology, building an alternative …

Optimal Scheduling Of Aircraft Test And Evaluation Fleets To Balance Availability For Testing And Training, Sarah E. Hoops

Theses and Dissertations

The 96th Test Wing at Eglin Air Force Base manually schedules a fleet of approximately 26 aircraft to conduct a range of missions over a one-to-two year planning period. This study automates the scheduling process, does so in a manner that optimizes multiple planning goals related to aircraft availability for training, and provides the 96th Test Wing with a software tool for the implementation that can be used by operational analysts within the command. We formulate the scheduling problem as a multiobjective, nonlinear, binary integer math program that seeks to maximize both the lowest percent of time any aircraft is …

Investigating Supply Parts Delivery Delay From Supply Depot To King Khaled Air Base In Royal Saudi Air Force, Rashed S. Alkhathami

Theses and Dissertations

Aircraft supply parts is an important factor in preparing the aircraft to do its mission. Due to delayed delivery of parts or inefficient delivery process, time may be lost waiting for aircraft supply parts, causing mission delay or failure. By tackling the delivery delay causes we can insure improvement on delivery process. In order to gather data for this thesis two different tools were used, aircraft parts data and an interview. Data was gathered from the F15 maintenance and supply squadrons in the Royal Saudi Air Force. Results of this research showed diverting in the main duty of supply depot …

Cooperative Wide Area Search Algorithm Analysis Using Sub-Region Techniques, Shawn Whitney

Theses and Dissertations

Recent advances in small Unmmaned Aerial Vehicle (UAV) technology reinvigorates the need for additional research into Wide Area Search (WAS) algorithms for civilian and military applications. But due to the extremely large variability in UAV environments and design, Digital Engineering (DE) is utilized to reduce the time, cost, and energy required to advance this technology. DE also allows rapid design and evaluation of autonomous systems which utilize and support WAS algorithms. Modern WAS algorithms can be broadly classified into decision-based algorithms, statistical algorithms, and Artificial Intelligence (AI)/Machine Learning (ML) algorithms. This research continues on the work by Hatzinger and Gertsman …

Instance Segmentation-Based Depth Completion Using Sensor Fusion And Adaptive Clustering For Autonomous Vehicle Perception, Mohammad Z. El-Yabroudi

Dissertations

Depth sensing is critical for safe and accurate maneuvering in robotics and self-driving car (SDC) applications. Most recent LiDAR sensors, such as Ouster and Velodyne, offer 360 degrees of scanning at the rate of ten frames per second, making them very appropriate for autonomous driving applications. However, LiDAR point cloud data show many shortcomings, especially its data sparsity and unassigned nature, making it very challenging to utilize in applications such as perception, 3D object detection, 3D scene reconstruction, and simultaneous localization and mapping.

In this study, a novel framework using instance image segmentation and the raw LiDAR data for the …

Study Of Sustainable Development In Paper, Printing And Packaging Material Applications To Support Circular Economy, Prashant Ramesh Kotkar

Dissertations

To support circular economy and sustainability, the use of suitable material in paper, printing, and packaging industries, for several types of industrial printing material and printed product applications, plays a significant role for end user applications. Several types of packaging printing materials, specifically those finished with different printing technologies and exposed to different environmental conditions are targeted.

The purpose of this research study is to improve design and evaluation for paper, printing, and packaging material sustainability in end-user applications, to deal with the addressed sustainability issues brought by the paper, printing and packaging products end user groups. As the impacts …

Characterization Of Losses In Superconducting Radio-Frequency Cavities By Combined Temperature And Magnetic Field Mapping, Ishwari Prasad Parajuli

Physics Theses & Dissertations

Superconducting radio-frequency (SRF) cavities are one of the fundamental building blocks of modern particle accelerators. To achieve the highest quality factors (10¹⁰-10¹¹), SRF cavities are operated at liquid helium temperatures. Magnetic flux trapped on the surface of SRF cavities during cool-down below the critical temperature is one of the leading sources of residual RF losses. Instruments capable of detecting the distribution of trapped flux on the cavity surface are in high demand in order to better understand its relation to the cavity material, surface treatments and environmental conditions. We have designed, developed, and commissioned two novel …

Effects Of A Non-Uniform Magnetic Field On The Current Flow Of Silicon Photodiodes And Solar Cells, Jason J. Buranich

Theses and Dissertations

This research investigates an approach to improve efficiency of low-cost devices by applying an external arched magnetic field to p-n junction devices to observe the effect such a magnetic field would have on the flow of charge carriers. Electro-optic p-n junction devices of photodiodes and solar cells were designed and fabricated to incorporate the dimensions of commercially available neodymium magnets. The devices were placed in the magnetic fields created by the magnets then current and voltage characteristics were measured via a 4-point probe setup. These measurements were compared to measurements taken from the same devices when not in the magnetics …

Operational And Cost Analysis Of A Leo Radar-Based Satellite Constellation, Kyle O. Norbert

Theses and Dissertations

This thesis presents a methodology to assess the ability of a Low-Earth Orbit (LEO) satellite constellation to successfully accomplish the GMTI mission in a cost-effective fashion. A simulation model was developed to test the coverage performance of 512 unique constellation designs. Significant factors were revealed by developing regression models that revealed the most critical constellation trade-offs on measures of performance. A Value-Focused Thinking (VFT) approach was applied to assign weights to a broad range of measures of performance from which the Pareto distribution on a cost-capability plot revealed cost-effectiveness. A novel measure of performance was developed and analyzed that accounted …

Learning Curve Characterization Within Complex Low-Rate Production Environments, Robert J. Gies

Engineering Management & Systems Engineering Theses & Dissertations

Traditional and current learning curve approaches, methods, and theories were deficient when addressing complex low-rate production systems. The purpose of this research was to address this problem and develop a learning curve approach that characterizes learning in low-rate production environments such as naval ship construction. This research identified the principal aspects that influence learning within this environment and developed a learning characterization more reflective of this environment.

There obviously exists a large body of knowledge covering learning. However, the research contained herein addresses learning as it relates to learning curves in low-rate production environments, such as naval shipbuilding. The various …

Advanced Generalized Predictive Control And Its Application To Tiltrotor Aircraft For Stability Augmentation And Vibration Reduction, Thomas Glen Ivanco

Mechanical & Aerospace Engineering Theses & Dissertations

The goals of this research were to restore generalized predictive control (GPC) capability at NASA and within the community, to better understand GPC and its performance relative to other options, and to improve upon the capability of GPC. Unique to this research is the comparison of GPC with other control options including PID controllers, optimal control theory, and other versions of the similar AutoRegressive moving average model with eXogenous inputs (ARX) models. Similar to GPC, ARX models use an experimentally acquired system identification to characterize the input/output relationship between controls and response measurements. Because this relationship is determined from acquired …

Integrative Physiology-Coupled Pilot-Centered Flight Simulation, Shawn C. Harrison

Electrical & Computer Engineering Theses & Dissertations

Maintaining the pilot’s physiological performance envelope within the limits of human capabilities may be crucial for avoiding hazardous physiological episodes in fighter aircraft that compromise safety. The main physiological episode of interest is impaired pilot respiration, better known as hypoxia caused by a high fraction of inspired oxygen (FiO₂) at high altitudes and variation in accelerative gravitational forces (g-forces). Integrated into fighter aircraft is an Onboard Oxygen Generating System (OBOGS) developed to mitigate the necessity of gaseous and liquid oxygen cannisters [1]. OBOGS act as a life support in hypoxic environments by providing oxygen-rich air, thereby oxygenating the …