Engineering Commons^™

The Spray-On Bio-Bandage, Kristine Peterson, Amanda Moravek, Abby Edward

Fall Student Research Symposium 2022

Fibrin is a natural polymer already used in extreme clinical settings as an adhesive and for shallow wounds when activated by the enzyme thrombin. However, current formations contain irritants, are slow drying, and are not easily washed off. This study used a spray-on bandage composed of thrombin and fibrinogen on a monolayer of 3T3 mouse fibroblast cells to test the enhancement of the body's natural healing without the risks of current formulations. The viability and growth of scratched cells were analyzed using live/dead stain assays 0, 1, and 3 days post-treatment. The results of this study showed cell growth, fibrinogen …

Study Of Carbon Nanotube Embedded Honey As A Resistive Switching Material, Md Mehedi Hasan Tanim, Brandon Sueoka, Zhigang Xiao, Kuan Yew Cheong, Feng Zhao

Electrical and Computer Engineering Faculty Research & Creative Works

In this paper, natural organic honey embedded with carbon nanotubes (CNTs) was studied as a resistive switching material for biodegradable nonvolatile memory in emerging neuromorphic systems. CNTs were dispersed in a honey-water solution with the concentration of 0.2 wt.% CNT and 30 wt.% honey. The final honey-CNT-water mixture was spin-coated and dried into a thin film sandwiched in between Cu bottom electrode and Al top electrode to form a honey-CNT based resistive switching memory (RSM). Surface morphology, electrical characteristics and current conduction mechanism were investigated. The results show that although CNTs formed agglomerations in the dried honey-CNT film, both switching …

An Investigation Into The Role Of Geometrically Necessary Dislocations In Multi-Strain Path Deformation In Automotive Sheet Alloys, Rishabh Sharma

Theses and Dissertations

Multiple strain path changes during forming lead to complex geometrically necessary dislocation (GND) development in strain gradient fields, inducing internal stresses that contribute to the Bauschinger effect, residual stresses, and springback which alters the final geometrical shape of the part. In order to analyze and design improved processing routes, models must capture the evolution of these internal stresses. However, most models capture the effects of these stresses via phenomenological approaches that require calibration to each new material and strain path. The development of models that capture the underlying physics at the sub-grain level is underway but requires in-depth studies of …

Experimental And Numerical Study: Sheet Pile Abutment Systems For Water-Crossing Bridges, Hung Phi Van

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Sheet piles are geotechnical-structural elements with interlocking edges together that are driven into the ground to deliver soil retention and excavation support. Steel sheet pile walls are widely used for retaining walls, riverbank protection, seawalls, cofferdams, etc. In Nebraska, sheet pile walls prevent scouring and protect backfill for bridge abutment systems. While sheet piling is not designed and applied to resist vertical load, several recent studies attempted to investigate whether sheet piles could be employed for axial load bearing. Many projects from Europe and some in the U.S. have utilized the axial load-bearing capacity of sheet piles in bridge abutment …

Interlayered Thin Film Composite (Itfc) Membranes: The Synthesis And Assembly Of Active Layer From Conjugated Microporous Polymer, Febby Andini

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

The pursuit of advanced materials with well-defined structures at sub-1 nm size, multi-functionalities, and superior chemical stability is essential for enhanced separation performance but technically challenging. Limitations of conventional TFC membranes for use in Organic Solvent Nanofiltration (OSN) can be addressed by manipulating the pore size and chemical properties of the film with novel materials. Conjugated microporous polymers (CMPs) are promising in a few years because of their highly ordered structure and excellent stability. Porphyrin, one of the basic building blocks, can form a conjugated polymer. Herein, poly(5,10,15,20-tetrakis(4-aminophenyl)porphyrin) or PTAPP, is considerably selected as an active layer from CMPs using …

Programming The Properties Of Branched Polymers Through Precision Architectures, Michael R. Dearman

LSU Master's Theses

The glass transition of branched polymers is determined by multiple structural parameters that dictate their inter- and intramolecular interactions, and ultimately, their molecular packing in the amorphous phase. Here we examined the impact of side chain length, backbone length, molecular weight composition, and topology on the glass transition behavior of bottlebrush polymers. Through examining precision bottlebrush polymer libraries (PBP, ĐSC = 1.0), we find the infinite molecular weight Tg is reached at a specific brush length after which the effect of the side-chain length dominates. Being a factor more dominant than the backbone, side-chain length affects the Tg of bottlebrush …

A Robust Platform For Mobile Robotics Teaching And Developing Using Arduino’S Integrated Development Environment (Ide) For Programming The Arduino Mega 2560, Sajjad Alhassan

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

In light of the rapid pace at which development happens with modern technology, mobile robots play an important role in our daily lives. This is due to their great importance in facilitating the affairs of life in various economic, commercial, industrial, scientific, and many other fields. In this research and project, we have restructured the microcontroller and system for one of the mobile robots (CEENBOT) that was designed by the University of Nebraska and replaced it with an Arduino Mega 2560.

The purpose of using the Arduino Mega 2560 robot is to provide alternative programming for the CEENBOT platform to …

An Empirical Study On The Classification Of Python Language Features Using Eye-Tracking, Jigyasa Chauhan

School of Computing: Dissertations, Theses, and Student Research

Python, currently one of the most popular programming languages, is an object-
oriented language that also provides language feature support for other programming
paradigms, such as functional and procedural. It is not currently understood how
support for multiple paradigms affects the ability of developers to comprehend that
code. Understanding the predominant paradigm in code, and how developers classify
the predominant paradigm, can benefit future research in program comprehension as
the paradigm may factor into how people comprehend that code. Other researchers
may want to look at how the paradigms in the code interact with various code smells.
To investigate how …

Semantic Segmentation Based Deep Learning Approaches For Weed Detection, Puranjit Singh

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

Global increase in herbicide use to control weeds has led to issues such as evolution of herbicide-resistant weeds, off-target herbicide movement, etc. Precision agriculture advocates Site Specific Weed Management (SSWM) application to achieve precise and right amount of herbicide spray and reduce off-target herbicide movement. Recent advancements in Deep Learning (DL) have opened possibilities for adaptive and accurate weed recognitions for field based SSWM applications with traditional and emerging spraying equipment; however, challenges exist in identifying the DL model structure and train the model appropriately for accurate and rapid model applications over varying crop/weed growth stages and environment. In our …

Fault Tolerant Robotics Using Active Diagnosis Of Partially Observable Systems And Optimized Path Planning For Underwater Message Ferrying, Devon M. Webb

Theses and Dissertations

Underwater robotic vehicles are used in a variety of environments that would be dangerous for humans. For these vehicles to be successful, they need to be tolerant of a variety of internal and external faults. To be resilient to internal faults, the system must be capable of determining the source of faulty behavior. However many different faults within a robotic vehicle can create identical faulty behavior, which makes the vehicles impossible to diagnose using conventional methods. I propose a novel active diagnosis method for differentiating between faults that would otherwise have identical behavior. I apply this method to a communication …

2022 - The Third Annual Fall Symposium Of Student Scholars

Symposium of Student Scholars Program Books

The full program book from the Fall 2022 Symposium of Student Scholars, held on November 17, 2022. Includes abstracts from the presentations and posters.

Recent Technical Breakthroughs Enable Smart Manufacturing: A Review, Manish Kumar, Shanu Pandey, Kanchan Upadhyay, Pritibala Taunk, Raunak Kumar Tamrakar

Al-Bahir

In human culture, machine learning has long been used to address complicated issues. Machine learning is successful because of the help provided by computational power and sensing technology. Data-driven strategies and the development of artificial intelligence will soon have a significant impact on the industry. Common examples include search engines, picture recognition, biometrics, speech and handwriting recognition, natural language processing, as well as medical diagnostics and credit scores. It is obvious that when artificial intelligence permeates our globe and, more precisely, our lives, numerous challenges will become public. According to predictions, Industry 4.0 or Smart Manufacturing will be the next …

Stochastic Approach To Hydrological Dam Safety In The Framework Of The New Dam Safety Standards In Spain, Iván Gabriel-Martin, Francisco J. Caballero, Álvaro Sordo-Ward, Luis Garrote

Protections Conference

The approval of the Technical Safety Standards for dams and reservoirs in Spain in 2021 increased the hydrological safety requirements, being necessary to check if measures have to be implemented in dams designed according to the prior standards. Some of these dams have scarce instrumentation and lack of hydrometeorological data. This work proposes a simple but sounded fully-stochastic methodology for assessing the hydrological safety of dams within this situation, potentially applicable outside academia. The methodology has been applied to a case study based on a real dam, and compared the results obtained to those of the standard deterministic procedure. We …

Wirewall A Follow Up: Labratory And Field Measurements Of Wave Overtopping, Tim Pullen, Jenny Brown, Margaret Yelland, Robin Pascal, Richard Pinnell, Chris Cardwell, David Jones

Protections Conference

At the Protections 2018 conference, the WireWall wave overtopping research project was introduced. WireWall uses recent advances in high frequency capacitance wire technology that can measure overtopping data. Wave overtopping has now been measured in the laboratory and in the field using the WireWall system. Here we provide an update on the validation of the system in flume tests and results from the first field measurement campaign.

Before deployment in the field, an extensive set of tests were carried out in one of the 2D wave flumes at HR Wallingford. These tests simulated known wave conditions from a buoy near …

Methodology For Calculating The Response Of Porous Media For Evaluating Grass Response To Overtopping Loads, Myron Von Damme, Dennis Den Ouden-Van Der Horst

Protections Conference

Grass covers offer a level of erosion protection against hydrodynamic loads induced by overtopping waves. The development of an accurate failure criterion for grass covers has been hampered by the lack of understanding of how grass fails. Methods have been developed to predict the hydrodynamic loads that act on the levee surface and consequently are transmitted to the porous grass cover and subsoil. However, it is unknown how these hydrodynamic surface loads on the soil are distributed amongst the pore water pressures and effective stresses, thereby offering a significant challenge for engineers to simulate the transmission of stresses into the …

Hydraulic Computations For Stepped Concrete Overlays Of Embankment Dams, Tony L. Wahl, Sherry L. Hunt, Kem C. Kadavy, Henry T. Falvey

Protections Conference

One method for rehabilitating and modernizing embankment dams is the addition of a concrete overlay that protects the embankment and allows floods to pass safely over the dam. Roller compacted concrete is commonly used, which makes it practical to use a stepped construction that also enhances energy dissipation. Analysis of flow conditions over such structures requires computation of aerated flow and its effects on flow depth, training wall design, and energy dissipation. This paper describes Spillway Pro, an energy-based water surface profile calculation tool for smooth spillway chutes (Wahl et al. 2019), recently improved to also analyze stepped chutes. The …

Quasi-Prototype Size Testing Of Wedge-Shaped Block For Armoring Embankment Dams And Levees, Francisco Javier Caballero, Miguel Ángel Toledo, Rafael Moran, Javier Peraita

Protections Conference

A series of tests of wedge-shaped blocks intended for armoring embankment dams and levees was carried out in a new experimental facility (‘Hydraulic Experimentation Facility—Luis Ruano’) under quasi-prototype conditions. This unique facility is located in the canal leading to the Laverné reservoir (Zaragoza, Spain) with a maximum vertical drop of 7 m and discharge up to 9 m³s ⁻¹. The aim was to conduct experimental research on technologies to protect embankment dams and dikes against overflowing erosion under quasi-prototype conditions. The results of the tests demonstrate the ability of the WSBs to withstand high unit …

Riprap Protection Exposed To Overtopping Phenomena: A Review Of Laboratory Experimental Models, Théo Dezert, Geir Helge Kiplesund, Fjóla Guðrún Sigtryggsdóttir

Protections Conference

There are increasing demands from dam safety regulations and guidelines to upgrade the rockfill dams, especially in Norway where over 180 large rockfill dams are present. To protect the hydraulic structure against overtopping events or leakages, it is important to use defence mechanisms such as a protective layer of riprap on the downstream slope. In this article, we display 9 experimental setups of riprap, conducted at the hydraulic laboratory of NTNU (Trondheim) and subjected to overtopping phenomena with increasing water discharge, until the complete failure of the model. These tests were performed on models with dumped and placed riprap, with …

Student Engagement In An Online Engineering Afterschool Program During The Covid-19 Pandemic, Virginia Snodgrass Rangel, Jerrod A. Henderson, Chelsea Martinez, Rick Greer

Journal of Pre-College Engineering Education Research (J-PEER)

The COVID-19 pandemic forced much of schooling online and limited students’ access to informal learning opportunities such as afterschool programs. The purpose of this study was to investigate how fourth- and fifth-grade students engaged in an online engineering program and what factors influenced their engagement. We drew on a four-dimensional model of student engagement to describe how students engaged in the afterschool engineering program and to identify the factors that enhanced or inhibited engagement. Using a case study design, we drew on interviews with six program mentors and ten students and observation data from weekly Zoom sessions throughout the 2020–2021 …

Overflow Tests On Grass-Covered Embankments At The Living Lab Hedwige-Prosperpolder: An Overview, André R. Koelewijn, Stephan J.H. Rikkert, Patrik Peeters, Davy Depreiter, Myron Van Damme, Wouter Zomer

Protections Conference

In regions with a temperate climate, a well-maintained grass sod on a clay layer is considered a reliable protection for dams and dikes. In the Living Lab Hedwige-Prosperpolder, on the left bank of the Scheldt river straddling the border between Belgium and the Netherlands, a series of 27 overflow tests with a purpose-built overflow generator has been executed to determine the strength of the protective layer against erosion at various conditions. The goal of this paper is to inform on the executed test program and the initial results. From the results, it was concluded that in general, a high-quality grass …

Field Testing Of The Overflow Erosion Of Rhone River Levees, Christophe Picault, Fabrice Campette, Stéphane Bonelli, Sylvie Nicaise, Naim Chaouch, Faustine Byron, Yves Gremeaux, Alexis Doghmane, Mathys Garoui, Jordan Herbeck, Frédéric Golay

Protections Conference

It is important to quantify the soil resistance against erosion caused by the overflow of dikes and levees. Small-scale tests are not recommended, as they do not provide a correct representation of the actual soil in place and do not take into account the geometry of the structure. For this reason, the National Research Institute for Agriculture, Food and Environment (INRAE) developed an on-site overflow device in 2015. The procedure followed is based on ASTM-D6460 standard. Two tests were performed in May 2022 on a Compagnie Nationale du Rhône (CNR) dike near Avignon (France). The dike is 6.2 m high; …

Recent Case Histories Of Cascade Failures And Overflowing Events Of Embankment Dams, Alexius Vogel, Jean-Robert Courivaud, Katarzyna Jarecka

Protections Conference

Excessive rainfall and extensive flooding within the context of a changing environment show the fact that resistance to overflowing erosion of embankment dams needs to be better assessed because of the increasing number of dam failures caused by overflowing, implying the necessity of a reaction to this kind of challenges. Better understandings of the embankment failure processes and the dominant parameters affecting these kinds of failures are necessary for predicting and modeling the breach processes. Acquiring this better understanding of the physical processes and a numerical prediction capability requires progressing in parallel in laboratory and field test investigations of embankment …

Earlier Snowmelt May Lead To Late Season Declines In Plant Productivity And Carbon Sequestration In Arctic Tundra Ecosystems, Donatella Zona, Peter M. Lafleur, Koen Hufkens, Barbara Bailey, Beniamino Gioli, George Burba, Jordan P. Goodrich, Anna K. Liljedahl, Eugénie S. Euskirchen, Jennifer D. Watts, Mary Farina, John S. Kimball, Martin Heimann, Mathias Göckede, Martijn Pallandt, Torben R. Christensen, Mikhail Mastepanov, Efrén López-Blanco, Marcin Jackowicz-Korczynski, Albertus J. Dolman, Luca Belelli Marchesini, Roisin Commane, Steven C. Wofsy, Charles E. Miller, David A. Lipson, Josh Hashemi, Kyle A. Arndt, Lars Kutzbach, David Holl, Julia Boike, Christian Wille, Torsten Sachs, Aram Kalhori, Xia Song

Daugherty Water for Food Global Institute: Faculty Publications

Arctic warming is affecting snow cover and soil hydrology, with consequences for carbon sequestration in tundra ecosystems. The scarcity of observations in the Arctic has limited our understanding of the impact of covarying environmental drivers on the carbon balance of tundra ecosystems. In this study, we address some of these uncertainties through a novel record of 119 site-years of summer data from eddy covariance towers representing dominant tundra vegetation types located on continuous permafrost in the Arctic. Here we found that earlier snowmelt was associated with more tundra net CO2 sequestration and higher gross primary productivity (GPP) only in June …

Predictions Of Indentation Stiffness Of Musculoskeletal Regions Using Ultrasound, Sean Doherty

ETD Archive

Tissue indentation response is an important metric for understanding how different musculoskeletal regions respond to loading and is a function of the tissue’s form. Modem imaging techniques provide information about the internal structures of human tissue. Ultrasound remains one of the most common imaging techniques performed, given its portability and low costs. Prior work and data collection on 100 patients involved the collection of ultrasound images at eight different locations across the musculoskeletal extremities. Given the tissue structure information that the medical imaging provided, it was hypothesized that the mechanical properties of the tissue could be predicted from this data. …

Strengthening Effects Of Carbon Nanotubes And Graphene Nanoplatelets Reinforced Nickel Metal Matrix Composites, Amit Patil

ETD Archive

Carbon nanotubes (CNTs) and graphene nanoplatelets (GNPs) with superior mechanical, thermal, chemical, and electrical properties are appealing reinforcements for the fabrication of lightweight, high-strength, and wear-resistant metal matrix composites with outstanding mechanical and tribological performance. The nickel-carbon nanotube composites (Ni-CNT) and nickel-graphene nano-platelet composites (Ni-GNP) were processed using two separate ball milling methods, namely dry ball milling (DM) and solution ball milling (SBM), and then sintered using the spark plasma sintering (SPS) technique. The influence of the premixing process, milling time, reinforcement morphology, and concentration on matrix grain size, microstructure, dispersion in the nickel matrix, mechanical properties, and tribological performance …

Predicting Geotechnical Parameters From Seismic Wave Velocity Using Artificial Neural Networks, Fatema Tuz Johora, Craig J. Hickey, Hakan Yasarer

Faculty and Student Publications

Geotechnical investigation plays an indispensable role in site characterization and provides necessary data for various construction projects. However, geotechnical measurements are time-consuming, point-based, and invasive. Non-destructive geophysical measurements (seismic wave velocity) can complement geotechnical measurements to save project money and time. However, correlations between geotechnical and seismic wave velocity are crucial in order to maximize the benefit of geophysical information. In this work, artificial neural networks (ANNs) models are developed to forecast geotechnical parameters from seismic wave velocity. Specifically, published seismic wave velocity, liquid limit, plastic limit, water content, and dry density from field and laboratory measurements are used to …

Novel Techniques For Quantifying Secondhand Smoke Diffusion Into Children's Bedroom, Sunil Ramchandani

Computational and Data Sciences (PhD) Dissertations

The impact of secondhand smoking to health of general population, and specifically children, is a well-known phenomenon that researchers have studied for years. In this dissertation, I extend work done within a secondhand smoke intervention to understand and quantity the impact of intervention on flow of smoke air particle concentration from the main room where smoking generates air particle contamination to a room where a child living in the home sleeps. The paper also explores potential modelling techniques to proactively identify and the impact of the smoke air particles with the intent to discourage adults from smoking in the home …

Afit By The Numbers, Fy2022, Air Force Institute Of Technology

AFIT Documents

No abstract provided.

Effect Of Hydrogen Sulfide Content On The Combustion Characteristics Of Biogas Fuel In Homogenous Charge Compression Ignition Engines, Mohammad Alrbai, Adnan Darwish Ahmad, Sameer Al-Dahidi, Ahmad M. Abubaker, Loiy Al-Ghussain, Hassan S. Hayajneh, Nelson Akafuah

Institute of Research for Technology Development Faculty Publications

The use of biogas fuel in homogeneous charge compression ignition (HCCI) engines has been promoted recently due to the environmental advantages. However, hydrogen sulfide (H2 S) forms a non-environment friendly content and biogas impurity that its removal is associated with high costs. In this study, the effect of using biogas fuel in the HCCI engines under different operating conditions is investigated to shed light on the best scenarios of biogas combustion, even with the presence of H2S contents. A modified reaction mechanism is introduced by considering the re- actions of H2 S with other species in the air-fuel mixture. The …

2022 Fall Engr333 Poster, Section B, Nicholas Paternoster, Nick Grossman, Jared Ruba, Zac Runhaar, Caleb Styf, Anne Ghata, Micah Lee, Thomas Noble, Liam Austin, Kai Barboza, Mark Bekhet, Jordan Tuter, Jacob Tanis, Sara Vansolkema, Aidan Bakker, Ben Casey, Sarah Maccarthy, Elise Miera, Christine Vanoyen

ENGR 333

• “What would it take to eliminate Calvin's natural gas-related net CO2 emissions?”
• Former Calvin President Michael Le Roy signed the President’s Climate Commitment on Dec 6, 2017
• Pledged carbon neutrality by 2057
• Results so far have been mixed due to the COVID-19 pandemic, but gains have come from: Improved lighting efficiency, Reduced enrollment, Renewable electricity is already being tackled through partnerships with companies like Sun FundED.