Engineering Commons^™

Thermal Post-Processing Of 3d Printed Polypropylene Parts For Vacuum Systems, Pierce Mayville, Aliaksei L. Petsiuk, Joshua M. Pearce

Michigan Tech Publications, Part 1

Access to vacuum systems is limited because of economic costs. A rapidly growing approach to reduce the costs of scientific equipment is to combine open-source hardware methods with digital distributed manufacturing with 3D printers. Although high-end 3D printers can manufacture vacuum components, again, the cost of access to tooling is economically prohibitive. Low-cost material extrusion 3D printing with plastic overcomes the cost issue, but two problems arise when attempting to use plastic in or as part of vacuum systems: the outgassing of polymers and their sealing. To overcome these challenges, this study explores the potential of using post-processing heat treatments …

Influence Of Nano-Sized Sic On The Laser Powder Bed Fusion Of Molybdenum, Nathan E. Ellsworth, Ryan A. Kemnitz, Cayla C. Eckley, Brianna M. Sexton, Cynthia T. Bowers, Joshua R. Machacek, Larry W. Burggraf

Faculty Publications

Consolidation of pure molybdenum through laser powder bed fusion and other additive manufacturing techniques is complicated by a high melting temperature, thermal conductivity and ductile-to-brittle transition temperature. Nano-sized SiC particles (0.1 wt%) were homogeneously mixed with molybdenum powder and the printing characteristics, chemical composition, microstructure, mechanical properties were compared to pure molybdenum for scan speeds of 100, 200, 400, and 800 mm/s. The addition of SiC improved the optically determined density and flexural strength at 400 mm/s by 92% and 80%, respectively. The oxygen content was reduced by an average of 52% over the four scan speeds analyzed. Two mechanisms …

Full Volume 13, Issue 1, Seyma Tufan

Space and Defense

No abstract provided.

Warming Of The Willamette River, 1850–Present: The Effects Of Climate Change And Direct Human Interventions, Stefan Talke, David Jay, Heida Diefenderfer

Civil and Environmental Engineering Faculty Publications and Presentations

Using archival research methods, we found and combined data from multiple sources to produce a unique, 140 year record of daily water temperature (Tw) in the lower Willamette River, Oregon (1881–1890, 1941–present). Additional daily weather and river flow records from the 1850s onwards are used to develop and validate a statistical regression model of Tw for 1850–2020. The model simulates the time-lagged response of Tw to air temperature and river flow, and is calibrated for three distinct time periods: the late 19th, mid 20th, and early 21st centuries. Results show that Tw has trended upwards at ~1.1 °C …

Quantifying Dds-Cerberus Network Control Overhead, Andrew T. Park, Nathaniel R. Peck, Richard Dill, Douglas D. Hodson, Michael R. Grimaila, Wayne C. Henry

Faculty Publications

Securing distributed device communication is critical because the private industry and the military depend on these resources. One area that adversaries target is the middleware, which is the medium that connects different systems. This paper evaluates a novel security layer, DDS-Cerberus (DDS-C), that protects in-transit data and improves communication efficiency on data-first distribution systems. This research contributes a distributed robotics operating system testbed and designs a multifactorial performance-based experiment to evaluate DDS-C efficiency and security by assessing total packet traffic generated in a robotics network. The performance experiment follows a 2:1 publisher to subscriber node ratio, varying the number of …

Middle School Engineering Teachers’ Enactments Of Pedagogies Rooted In Funds Of Knowledge And Translanguaging, Amy Wilson-Lopez, Jorge Acosta-Feliz

Journal of Pre-College Engineering Education Research (J-PEER)

Multilingual students should have opportunities to learn and do engineering in learning environments that foreground and sustain their cultural and linguistic practices. However, little is known about how middle school engineering teachers enact these environments. To address this gap in research and practice, this comparative case study describes the different ways in which two middle school technology and engineering teachers enacted pedagogies rooted in funds of knowledge and translanguaging. The teachers and research team engaged in a professional learning community, which focused on funds of knowledge and language-based pedagogies, for over one year. The teachers enacted pedagogies that incorporated principles …

Technoeconomic Analysis Of Changing Pv Array Convective Cooling Through Changing Array Spacing, Matthew Prilliman, Sarah E. Smith, Brooke Stanislawski, Janine M.F. Keith, Timothy J. Silverman, Marc Calaf, Raul Bayoan Cal

Mechanical and Materials Engineering Faculty Publications and Presentations

Accuracy in photovoltaic (PV) module temperature modeling is crucial to achieving precision in energy performance yield calculations and subsequent economic evaluations of PV projects. While there have been numerous approaches to PV temperature modeling based on both the steady-state and transient thermal assumptions, there have been few attempts to account for changing convective cooling on PV module surfaces resulting from changes in the PV system layout. Changes in system row spacing, in particular, can have a meaningful impact on module electrical efficiency and subsequent economic performance, even when considering additional costs from the changes in row spacing. Using a heat …

Development And Validation Of “Hazard O’Clock”: A Home Hazard And Disaster Awareness Game, Reynal M. Penus, Cyron Aris V. Casabuena, Jarl Leander L. Madamba, Erickson F. Del Mundo, Toshio Akira Capintog, Angelo G. Cabic

Sinaya: A Philippine Journal for Senior High School Teachers and Students

The Philippines is the fourth most disaster-prone country in the world due to its location in the Pacific Ring of Fire and Pacific Typhoon Belt. When it comes to these disasters, children below the age of 18 are considered to be among the most vulnerable. This study aimed to develop a mobile game about Disaster Risk Reduction and Management (DRRM) in the home setting that can be used as a teaching aid for children. The information integrated into the game was from different resources made by various government agencies. The Analysis, Design, Development, Implementation, and Evaluation (ADDIE) model was used …

Utilization Of Varying Colors Of Light Emitting Diodes In Vertical Farms For Solanum Lycopersicum (Tomato), Juliana Marie E. Tamayo, James Phillip B. Ho, Jay Michael T. Carlos, Jose Rene Q. Pinuela, Paolo D. Corrales, Alen Christian R. Koyama, Bianca Maxine F. Lim, Daniel G. Alcantara, Jose Mari M. Calamlam, Gerald B. Gamboa

Sinaya: A Philippine Journal for Senior High School Teachers and Students

In response to climate change and significant decreases of arable land in developing nations, vertical farming has emerged as a suitable alternative to the conventional method of farming with its use of modern technologies such as LED lights. Since previous literature on this subject had mainly focused on the effects of blue and red lights concerning plant growth, this research paper involved 620 nm (pink light), 550 nm (green light), and the combination of the colors in the color spectrum (white light) to expand the scope of the study. The facilities used for the experiment were a multiple-row vertical setup …

Utilization Of Daucus Carota Subsp. Sativus (Carrot) Peels And Oryza Sativa (Rice) As Alternative Materials For Paper Production, Jiwoo Kim, Gabriel Kurt Aguila, Julienna Nicolle B. Espinase, Kyle Ranier T. Fortuna, Ryo G. Hizume, Elaine Jan F. Mendoza, Austin David M. Saldivar, Yujin Yang, Jose Mari M. Calamlam, Gerald B. Gamboa

Sinaya: A Philippine Journal for Senior High School Teachers and Students

The problem of pollution and deforestation have continuously contributed to the mass deterioration of the environment. This study aimed to create paper from rice and carrot wastes tested in a laboratory. The study followed an experimental research design, utilizing TAPPI T-220 test methods and ISO standard procedures. The paper sheets were tested under four quality tests: paper tear index, folding endurance, grammage, and paper burst strength. Data gathered from laboratory tests were statistically analyzed via the independent t-test. It was found that rice papers had a higher paper tear index (4.99 mN.m^2/g), folding endurance (3.81 folds), and paper burst strength …

An Experimental Study Of Norton And Thule Cooking Pot Performance, Caelie Marshall Butler

Dissertations and Theses

Ceramic technology was adopted by hunter-gatherers of the Paleo-Inuit Norton tradition in the Western Arctic between 2800 and 2500 years B.P., corresponding with an increase in the use of aquatic resources. Pottery production and use continued until approximately 1,500 BP, and resumed during the Neo-Inuit Birnirk and Thule periods, approximately 1,350 years BP. The technical characteristics of Norton and Thule ceramics suggest they performed differently when used for cooking, with Norton ceramics best suited for cooking using direct or suspended heat, and Thule ceramics best suited for indirect heat. Prior experimental archaeological research has focused on Thule ceramics, with limited …

Development Of A Nanobiodegradable Drilling Fluid Using Prosopis Farcta Plant And Pomegranate Peel Powders With Metal Oxide Nanoparticles, Jagar A. Ali, Rawezh N. Ahmed, Abdullah D. Abdullah, Nali H. Ali, Abdullah M. Kalhury, Ayub N. Sabir, Abbas Khaksar Manshad, Alireza Keshavarz, Amir H. Mohammadi

Research outputs 2022 to 2026

One of the inevitable problems encountered during the petroleum well drilling process is "lost circulation"in which part of the drilling fluid is lost into the formation. A combination of nanoparticles with their unique properties and cost-effective biodegradable materials can play an effective role in treating fluid loss. In this study, our aim was to formulate drilling fluids modified with nanoparticles, pomegranate peel powder, and Prosopis farcta plant powder. The drilling fluids were identified and recognized using scanning electron microscopy, X-ray diffraction, and Fourier transform infrared spectroscopy techniques. Furthermore, experimental tests were conducted in order to investigate the performance of the …

Advances In High-Order Sensitivity Analysis For Uncertainty Quantification And Reduction In Nuclear Energy Systems, Dan Gabriel Cacuci

Faculty Publications

No abstract provided.

Distribution Of Dds-Cerberus Authenticated Facial Recognition Streams, Andrew T. Park, Nathaniel Peck, Richard Dill, Douglas D. Hodson, Michael R. Grimaila, Wayne C. Henry

Faculty Publications

Successful missions in the field often rely upon communication technologies for tactics and coordination. One middleware used in securing these communication channels is Data Distribution Service (DDS) which employs a publish-subscribe model. However, researchers have found several security vulnerabilities in DDS implementations. DDS-Cerberus (DDS-C) is a security layer implemented into DDS to mitigate impersonation attacks using Kerberos authentication and ticketing. Even with the addition of DDS-C, the real-time message sending of DDS also needs to be upheld. This paper extends our previous work to analyze DDS-C’s impact on performance in a use case implementation. The use case covers an artificial …

Parasol: Efficient Parallel Synthesis Of Large Model Spaces, Clay Stevens, Hamid Bagheri

School of Computing: Conference and Workshop Papers

Formal analysis is an invaluable tool for software engineers, yet state-of-the-art formal analysis techniques suffer from well-known limitations in terms of scalability. In particular, some software design domains—such as tradeoff analysis and security analysis—require systematic exploration of potentially huge model spaces, which further exacerbates the problem. Despite this present and urgent challenge, few techniques exist to support the systematic exploration of large model spaces. This paper introduces Parasol, an approach and accompanying tool suite, to improve the scalability of large-scale formal model space exploration. Parasol presents a novel parallel model space synthesis approach, backed with unsupervised learning to automatically derive …

Climate And Genetic Data Enhancement Using Deep Learning Analytics To Improve Maize Yield Predictability, Parisa Sarzaeim, Francisco Muñoz-Arriola, Diego Jarquin

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Despite efforts to collect genomics and phenomics (“omics”) and environmental data, spatiotemporal availability and access to digital resources still limit our ability to predict plants’ response to changes in climate. Our goal is to quantify the improvement in the predictability of maize yields by enhancing climate data. Large-scale experiments such as the Genomes to Fields (G2F) are an opportunity to provide access to “omics” and climate data. Here, the objectives are to: (i) improve the G2F “omics” and environmental database by reducing the gaps of climate data using deep neural networks; (ii) estimate the contribution of climate and genetic database …

Micro-Triboelectric Generator For Zero-Power Shock Detection, Mohammad Alzgool, Mohammad Mousavi, Benyamin Davaji, Shahrzad Towfighian

Mechanical Engineering Faculty Scholarship

This work shows zero-power shock sensing for the combination of a micro-triboelectric generator and MEMS electrostatic actuator system where the mechanical shock to the generator causes it to produce volt- age, this voltage is used to actuate a Micro-Electro-Mechanical-system (MEMS) switch. For the first time, we present the fabrication process of a Triboelectric-Nano-Generator (TENG) with MEMS technology. The MEMS-TENG has a suspended 1.5mm × 1.5mm plate separated by 2 μm from the substrate. The generator is a triboelectric transducer made of a suspended Al micro-plate above a polyimide (PI) thin layer that is covered by another Al layer in the …

Solar Pv Panels-Self-Cleaning Coating Material For Egyptian Climatic Conditions, Iman El-Mahallawi, Engy Elshazly, Olugbenga Timo Oladinrin Dr., Muhammad Qasim Rana Dr.

Renewable Mechanical Energy

No abstract provided.

Study Of Asymptotic Velocity In The Bondi–Hoyle Accretion Flows In The Domain Of Kerr And 4-D Einstein–Gauss–Bonnet Gravities, Orhan Donmez, Fatih Dogan, Tuba Sahin

Materials Science and Engineering Faculty Research & Creative Works

Understanding the physical structures of the accreted matter very close to a black hole in quasars and active galactic nucleus (AGN) is an important milestone to constrain the activities occurring in their centers. In this paper, we numerically investigate the effects of the asymptotic velocities on the physical structures of the accretion disk around the Kerr and Einstein–Gauss–Bonnet (EGB) rapidly rotating black holes. The Bondi–Hoyle accretion is considered with a falling gas towards the black hole in an upstream region of the computational domain. Shock cones are naturally formed in the downstream part of the flow around both black holes. …

Key Aspects To Consider For The Hydrogen Strategy Of Ireland, Utkarsha Chavan

Other resources

Hydrogen will be the key player in achieving the net-zero carbon emission target but, some aspects need to be considered while formulating the hydrogen strategy for Ireland. In this article, the first aspect emphasises promoting hydrogen production technologies with low to nill carbon emissions followed by gauging the hydrogen demand for individual energy demand sectors. The second aspect focuses on the technical constraints revolving around the direct injection of hydrogen into the natural gas network. The government needs to play an important role as a policy maker and as an investor to achieve net-zero carbon emission through hydrogen.

Identifying Fibre Orientations For Fracture Process Zone Characterization In Scaled Centre-Notched Quasi-Isotropic Carbon/Epoxy Laminates With A Convolutional Neural Network, Xiaodong Xu, Aser Abbas, Juhyeong Lee

Mechanical and Aerospace Engineering Faculty Publications

This paper presents a novel X-ray Computed Tomography (CT) image analysis method to characterize the Fracture Process Zone (FPZ) in scaled centre-notched quasi-isotropic carbon/epoxy laminates. A total of 61 CT images of a small specimen were used to fine-tune a pre-trained Convolutional Neural Network (CNN) (i.e., VGG16) to classify fibre orientations. The proposed CNN model achieves a 100% accuracy when tested on the CT images of the same scale as the training set. However, the accuracy drops to a maximum of 84% when tested on unlabelled images of the specimens having larger scales potentially due to their lower resolutions. Another …

Comparison Of Rubber Asphalt With Polymer Asphalt Under Long-Term Aging Conditions In Michigan, Dongzhao Jin, Kwadwo Ampadu Boateng, Siyu Chen, Kai Xin, Zhanping You

Michigan Tech Publications, Part 1

The objective of this study is to compare the long-term aging performance of dry-processed rubber-modified asphalt mixture with styrene–butadiene–styrene polymer-modified asphalt mixture on heavy traffic volume roads in the wet-freeze environment of Michigan. The rutting performance was evaluated using the Hamburg wheel track device. The disc-shaped compact tension test was used to assess the fracture energy. The dynamic modulus experiment was used to estimate the load and displacement relationship. The asphalt binder properties were evaluated using multiple stress creep recovery and the linear amplitude sweep test. The pavement distresses were evaluated using the pavement mechanistic–empirical design. All three types of …

A Framework For Sexism Detection On Social Media Via Byt5 And Tabnet, Arjumand Younus, Muhammad Atif Qureshi

Articles

Hateful and offensive content on social media platforms particularly content directed towards a specific gender is a great impediment towards equality, diversity and inclusion. Social media platforms are facing increasing pressure to work towards regulation of such content; and this has directed researchers in text mining to work towards hate speech identification algorithms. One such attempt is sexism detection for which mostly transformer-based text methods have been proposed. We propose a combination of byte-level model ByT5 with tabular modeling via TabNet that has at its core an ability to take into account platform and language aspects of the challenging task …

Permafrost Landscape History Shapes Fluvial Chemistry, Ecosystem Carbon Balance, And Potential Trajectories Of Future Change, Scott Zolkos, Suzanne E. Tank, Steven V. Kokelj, Robert G. Striegl, Sarah Shakil, Carolina Voigt, Oliver Sonnentag, William L. Quinton, Edward A.G. Schuur, Donatella Zona, Peter M. Lafleur, Ryan C. Sullivan, Masahito Ueyama, David Billesbach, David Cook, Elyn R. Humphreys, Philip Marsh

Daugherty Water for Food Global Institute: Faculty Publications

Intensifying permafrost thaw alters carbon cycling by mobilizing large amounts of terrestrial substrate into aquatic ecosystems. Yet, few studies have measured aquatic carbon fluxes and constrained drivers of ecosystem carbon balance across heterogeneous Arctic landscapes. Here, we characterized hydrochemical and landscape controls on fluvial carbon cycling, quantified fluvial carbon fluxes, and estimated fluvial contributions to ecosystem carbon balance across 33 watersheds in four ecoregions in the continuous permafrost zone of the western Canadian Arctic: unglaciated uplands, ice-rich moraine, and organic-rich lowlands and till plains. Major ions, stable isotopes, and carbon speciation and fluxes revealed patterns in carbon cycling across ecoregions …

Elucidating The Interfacial Bonding Behavior Of Over-Molded Hybrid Fiber Reinforced Polymer Composites: Experiment And Multiscale Numerical Simulation, Gideon A. Lyngdoh, Sumanta Das

Faculty Publications - Biomedical, Mechanical, and Civil Engineering

This paper implements molecular dynamics (MD) simulation using reactive force field (ReaxFF) to evaluate the

atomistic origin of the interfacial behavior in the overmolded hybrid unidirectional continuous carbon fiber low-melt PAEK (CFR- LMPAEK)-short carbon fiber reinforced PEEK (SFR-PEEK) polymer composites. From the MD simulation, it was observed that the

interfacial properties improve with increasing maximum processing temperature and injection pressure although such an improving trajectory gets saturated beyond specific limits. The interfacial strength and fracture response of the hybrid polymer system at the interface are also evaluated. The mechanical responses obtained from MD simulation are used as adhesive properties in …

Physical, Chemical, And Mineralogical Controls On Retardation Of Anatoxin-A Migration By Sorption To Natural Soils With Implications For Groundwater Protection, Justin L. Hobart, Andrew M. O’Reilly, Jennifer N. Gifford

Faculty and Student Publications

Increasing prevalence of cyanotoxins in surface water bodies worldwide threatens groundwater quality when contaminated water recharges an aquifer through natural or artificial means. The subsurface fate of anatoxin-a (ATX) is not well studied. Laboratory batch experiments were performed to expand the current knowledge of ATX sorption affinities to geologic media, with a focus on natural soil (Vertisol, Ultisol, Alfisol, and Inceptisol) and physical, chemical, and mineralogical characteristics. For a range of aqueous ATX concentrations (0.3–14 μg/L), linear, Freundlich, and Langmuir isotherms fit observed data well (r2 = 0.92–1.00, RMSE = 0.4–6.3 μg/kg). Distribution coefficient (Kd) and retardation factor (Rf) values …

An Empirical Comparison Of The Security And Performance Characteristics Of Topology Formation Algorithms For Bitcoin Networks, Muntadher Sallal, Ruairí De Fréin, Ali Malik, Benjamin Aziz

Articles

There is an increasing demand for digital crypto-currencies to be more secure and robust to meet the following business requirements: (1) low transaction fees and (2) the privacy of users. Nowadays, Bitcoin is gaining traction and wide adoption. Many well-known businesses have begun accepting bitcoins as a means of making financial payments. However, the susceptibility of Bitcoin networks to information propagation delay, increases the vulnerability to attack of the Bitcoin network, and decreases its throughput performance. This paper introduces and critically analyses new network clustering methods, named Locality Based Clustering (LBC), Ping Time Based Approach (PTBC), Super Node Based Clustering …

Abbott Cardiac Electrophysiology Wet Lab Project, Melissa Kurani, Fiona Lynn

Biomedical Engineering: Graduate Reports and Projects

Cardiac mapping systems provide electrophysiologists with pertinent information about ablation treatment plans for patients who suffer from cardiac arrhythmias. This thesis describes the process of designing a functional wet lab that integrates with Abbott’s EnSite Precision 3D Mapping System, with the purpose of providing Cal Poly students and faculty with an opportunity to have a hands-on learning experience with cardiac mapping. This project encompassed a thorough literature review of cardiology, electrophysiology, and in vitro lab systems, followed by the design, manufacturing, and evaluation of a functional and anatomically representative wet lab. This is a continuation of previous master’s projects that …

Maximum Grid Spacing Effect On Peak Pressure Computation Using Inflow Turbulence Generators, Zahra Mansouri, Rathinam Panneer Selvam, Arindam Gan Chowdhury

Civil Engineering Faculty Publications and Presentations

The peak pressures are computed using computational fluid dynamics (CFD) with the synthetic inflow turbulence generator and compared with 1:6 scale Texas Tech University (TTU) wind tunnel measurements. The inflow turbulence is calculated using the Consistent Discrete Random Flow Generation Method (CDRFG) method. The maximum and minimum frequencies from the field or experimental measurements as input to the inflow turbulence generator without considering the largest grid spacing used in the CFD model leads to high pressure error. For one case, more than 100% error in peak pressure results is observed. In addition, spurious pressures are observed at the building location …

Optimal Inverter And Wire Selection For Solar Photovoltaic Fencing Applications, Koami Soulemane Hayibo, Joshua M. Pearce

Electrical and Computer Engineering Publications

Despite the benefits and the economic advantages of agrivoltaics, capital costs limit deployment velocity. One recent potential solution to this challenge is to radically reduce the cost of racking materials by using existing farm fencing as vertical photovoltaic (PV) racking. This type of fenced-based PV system is inherently electrically challenging because of the relatively long distances between individual modules that are not present in more densely packed conventional solar PV farms. This study provides practical insights for inverter selection and wire sizing optimization for fence-based agrivoltaic systems. Numerical simulation sensitivities on the levelized cost of electricity (LCOE) were performed for …