Engineering Commons^™

Experimental Study Of Electrical Heating To Enhance Oil Production From Oil-Wet Carbonate Reservoirs, Farida Amrouche, Donglai Xu, Michael Short, Stefan Iglauer, Jan Vinogradov, Martin J. Blunt

Research outputs 2022 to 2026

New approaches for enhanced oil recovery (EOR) with a reduced environmental footprint are required to improve recovery from mature oil fields, and when combined with carbon capture and storage (CCS) can provide useful options for resource maximisation during the net zero transition. Electrical heating is investigated as a potential EOR method in carbonate reservoirs. Samples were placed in an apparatus surrounded by a wire coil across which different DC (direct current) voltages were applied. Monitoring the imbibition of both deionized water (DW) and seawater (SW) into initially oil-wet Austin chalk showed that water imbibed into the rock faster when heated …

A Brief Review Of The Impact Of Silver Nanoparticles On Agriculture And Certain Biological Properties: A Case Study, Sushmashree Krishnappa, Shankramma Kalikeri, Raj Kumar H. Garampalli, Lingaraju H G, Charan Kumar Kachintaya

International Journal of Health and Allied Sciences

Nanotechnology is progressively becoming a popular field of research because it has been successful in changing our agricultural and food systems. According to research published by the UNFAO, agriculture as well as its derivatives would be in high demand sooner or later, owing to nutritional changes. Nanoparticles have been reported to be used in an agricultural sector, because of its capacity to encourage crop growth and yield. Among metal nanoparticles, Silver Nanoparticles (AgNPs) are attracting a lot of attention. We have highlighted some of the agricultural uses of AgNPs, which include pest management, plant disease detection, crop enhancement, and crop …

A Broad Spectrum Defense Against Adversarial Examples, Sean Mcguire

Theses and Dissertations

Machine learning models are increasingly employed in making critical decisions across a wide array of applications. As our dependence on these models increases, it is vital to recognize their vulnerability to malicious attacks from determined adversaries. In response to these adversarial attacks, new defensive mechanisms have been developed to ensure the security of machine learning models and the accuracy of the decisions they make. However, many of these mechanisms are reactionary, designed to defend specific models against a known specific attack or family of attacks. This reactionary approach does not generalize to future "yet to be developed" attacks. In this …

Spatially Guided Construction Of Multilayered Epidermal Models Recapturing Structural Hierarchy And Cell–Cell Junctions, Haiwei Zhai, Xiaowei Jin, Grayson Minnick, Jordan Rosenbohm, Mohammed Abdul Haleem Hafiz, Ruiguo Yang, Fanben Meng

Department of Mechanical and Materials Engineering: Faculty Publications

A current challenge in 3D bioprinting of skin equivalents is to recreate the distinct basal and suprabasal layers and promote their direct interactions. Such a structural arrangement is essential to establish 3D stratified epidermis disease models, such as for the autoimmune skin disease pemphigus vulgaris (PV), which targets the cell– cell junctions at the interface of the basal and suprabasal layers. Inspired by epithelial regeneration in wound healing, a method that combines 3D bioprinting and spatially guided self-reorganization of keratinocytes is developed to recapture the fine structural hierarchy that lies in the deep layers of the epidermis.Herein, keratinocyteladen fibrin hydrogels …

Reliability Of Bridge Inspection Technologies, Glenn A. Washer

INSPIRE Archived Webinars

This presentation will discuss the reliability of inspection technologies used for the condition assessment of highway bridges. Data from condition assessments are critical to asset management and decision-making. The methodologies used to assess condition are usually subjective methods, such as visual inspections, that can vary as a result of human factors and differences in training and interpretation of inspection procedures. Nondestructive evaluation technologies (NDE) are implemented on a more limited basis and rely on indirect measurements to infer the presence of damage, and these assessments are affected by environmental factors, materials variability, and limitations in the interpretation of the resulting …

Mesures À Haute Sensibilité Du Passage De Contaminants Nanométriques À Travers Les Gants De Protection Par Imagerie Médicale, Mahmoud Mohamed Omar, Amélie Augé, Myriam Laprise-Pelletier, Ludovic Tuduri, Marc-André Fortin

Rapports de recherche scientifique

Les gants de polymère sont utilisés comme équipements de protection individuels dans de nombreux secteurs d’activité professionnelle où les risques chimiques sont présents. Leur efficacité à bloquer le passage de certains contaminants doit être mesurée par des méthodes d’essais précises et standardisées. Les mesures de résistance chimique sont généralement effectuées en utilisant une cellule de perméation, un petit appareil contenant deux réservoirs séparés par la membrane dont on veut mesurer le potentiel-barrière : l’un contient le contaminant, l’autre contient un milieu collectant le contaminant après que celui-ci ait passé à travers la membrane. Au fur et à mesure de l’expérience, …

Metasurfaces For Sensing Applications: Gas, Bio And Chemical, Shawana Tabassum, S.K. Nayemuzzaman, Manish Kala, Akhilesh Kumar Mishra, Satyendra Kumar Mishra

Electrical Engineering Faculty Publications and Presentations

Performance of photonic devices critically depends upon their efficiency on controlling the flow of light therein. In the recent past, the implementation of plasmonics, two-dimensional (2D) materials and metamaterials for enhanced light-matter interaction (through concepts such as sub-wavelength light confinement and dynamic wavefront shape manipulation) led to diverse applications belonging to spectroscopy, imaging and optical sensing etc. While 2D materials such as graphene, MoS2 etc., are still being explored in optical sensing in last few years, the application of plasmonics and metamaterials is limited owing to the involvement of noble metals having a constant electron density. The capability of competently …

Changing Stem To Steam: An Analyzation On The Effects Of Art Integration Up To The University Level, Elizabeth Richmond

Honors Projects

This Honors Project is a combination of an artistic, creative project and a research driven analysis. The focus of this project is to research and understand the effects the arts have on both general students and STEM students in particular, what benefits come from art education and art integration, and if STEM students benefit from art integration. This goal was accomplished through a literature review and annotated bibliography featuring 18 sources. Another goal of the project was to understand where I fit into the research. In my creative portion of the project, I explored and analyzed how the arts affected …

Thermodynamic Limits Of Atmospheric Water Harvesting, Akshay K. Rao, Andrew J. Fix, Yun Chi Yang, David M. Warsinger

School of Mechanical Engineering Faculty Publications

Atmospheric water harvesting (AWH) is a rapidly emerging approach for decentralized water production, but current technology is limited by trade-offs between energy consumption and yield. The field lacks a common basis to compare different AWH technologies and a robust understanding of the performance impacts of water recovery, desorption humidity (for sorbent systems), and realistic component-level efficiencies. By devising a set of unifying assumptions and consistent parameters across technologies, we provide the first fair thermodynamic comparison over a broad range of environmental conditions. Using 2nd law analysis, or least work, we study the maximum efficiency for common open system AWH methods …

Ag-Iot For Crop And Environment Monitoring: Past, Present, And Future, Nipuna Chamara, Md Didarul Islam, Geng Bai, Yeyin Shi, Yufeng Ge

Department of Agricultural and Biological Systems Engineering: Faculty Publications

CONTEXT: Automated monitoring of the soil-plant-atmospheric continuum at a high spatiotemporal resolution is a key to transform the labor-intensive, experience-based decision making to an automatic, data-driven approach in agricultural production. Growers could make better management decisions by leveraging the real-time field data while researchers could utilize these data to answer key scientific questions. Traditionally, data collection in agricultural fields, which largely relies on human labor, can only generate limited numbers of data points with low resolution and accuracy. During the last two decades, crop monitoring has drastically evolved with the advancement of modern sensing technologies. Most importantly, the introduction …

Out Of The Blue: Volcanic So2 Emissions During The 2021–2022 Eruptions Of Hunga Tonga—Hunga Ha’Apai (Tonga), S. A. Carn, N. A. Krotkov, B. L. Fisher, C. Li

Michigan Tech Publications, Part 1

Most volcanism on Earth is submarine, but volcanic gas emissions by submarine eruptions are rarely observed and hence largely unquantified. On 15 January 2022 a submarine eruption of Hunga Tonga-Hunga Ha’apai (HTHH) volcano (Tonga) generated an explosion of historic magnitude, and was preceded by ∼1 month of Surtseyan eruptive activity and two precursory explosive eruptions. We present an analysis of ultraviolet (UV) satellite measurements of volcanic sulfur dioxide (SO2) between December 2021 and the climactic 15 January 2022 eruption, comprising an unprecedented record of Surtseyan eruptive emissions. UV measurements from the Ozone Monitoring Instrument (OMI) on NASA’s Aura satellite, the …

System Archetypes Underlying Formal-Informal Urban Water Supply Dynamics, Rakhshinda Bano, Mehdi Khiadani, Yong Saebastian Nyam

Research outputs 2022 to 2026

Contrary to developed countries, developing countries have been observed to have an increased reliance on a diversity of water supply options to meet their daily demands, where formal supply systems are incapable of fulfilling the daily needs of consumers. In filling a demand-supply gap, informal supply systems are increasingly being associated with issues of long-term sustainability, higher consumer cost, and inequity. Emerging formal-informal dynamics in developing countries require a thorough understanding of complex human-water interactions for policy direction, in order to best support the advancement of urban water sustainability. Accordingly, system archetypes offer a platform to explain the behaviors of …

Towards Efficient Scoring Of Student-Generated Long-Form Analogies In Stem, Thilini Wijesiriwardene, Ruwan Wickramarachchi, Valerie L. Shalin, Amit P. Sheth

Publications

Switching from an analogy pedagogy based on comprehension to analogy pedagogy based on production raises an impractical manual analogy scoring problem. Conventional symbol-matching approaches to computational analogy evaluation focus on positive cases, and challenge computational feasibility. This work presents the Discriminative Analogy Features (DAF) pipeline to identify the discriminative features of strong and weak long-form text analogies. We introduce four feature categories (semantic, syntactic, sentiment, and statistical) used with supervised vector-based learning methods to discriminate between strong and weak analogies. Using a modestly sized vector of engineered features with SVM attains a 0.67 macro F1 score. While a semantic feature …

Modelling The Hydrating Behaviour Of Fly-Ash In Blended Cements Using Thermodynamics, Nikki Shaji, Niall Holmes Dr., Mark Tyrer

Conference papers

This paper presents a new method to thermodynamically model the hydration behaviour of fly-ash (FA) blended cements by deriving individual phase descriptions depending on the proportion of FA in the blended cement. The predicted hydrated phase assemblage, pore solution chemistries and pH over 1,000 days of hydration and with increasing FA proportions are presented. The thermodynamic data for the FA phases are derived using oxide proportions and mineral compositions are copied directly into the PHREEQC input file. The FA phases take account of all minerals to give a more accurate description of its behaviour during hydration. The calcium aluminosilicate hydrate …

Effects Of Nutrient Level And Growth Rate On The Conjugation Process That Transfers Mobile Antibiotic Resistance Genes In Continuous Cultures, Mohammadreza Shafieifini, Yuepeng Sun, Zachery R. Staley, University Of Nebraska-Lincoln, Jean-Jack Riethoven, Xu Li

Department of Civil and Environmental Engineering: Faculty Publications

Bacteria in the effluent of wastewater treatment plants (WWTPs) can transfer antibiotic resistance genes (ARGs) to the bacteria in receiving water through conjugation; however, there is a lack of quantitative assessment of this phenomenon in continuous cultures. Our objective was to determine the effects of background nutrient levels in river water column and growth rates of bacteria on the conjugation frequency of ARGs from effluent bacteria to river bacteria, as well as on the resulting resistance level (i.e., MICs) of the river bacteria. Chemostats were employed to simulate the discharge points of WWTPs into rivers, where effluent bacteria (donor cells) …

Bio-Based Food Packaging Material For Intelligent Food Packaging Applications For Chicken Fillets, Kalpani Y. Perera, Amit K. Jaiswal, Swarma Jaiswal, Shubham Sharma

Articles

Bionanocomposite packaging is made up of bio- based materials that have high performance activity and are ecologically sustainable alternatives to packaging made of synthetic polymers. Intelligent packaging retains track of the state of the food and the environment in which it is stored, and communicates relevant changes to the consumer through visualization or other methods. The aim of this study was to develop a bionanocomposite intelligent packaging material by utilising sodium alginate, gelatin, nanoclay and curcumin. Sodium alginate, gelatin film incorporated with Curcumin (Cur), and Nanoclay (NC) in various concentrations (0% W/V, 0.5% W/V, 1% W/V and 1. 5% W/V) …

Filters Used For Roundness Error Evaluation: An Experimental Comparison Study, Fatma Elerian

Mansoura Engineering Journal

Filtration is a necessary step in roundness measurement. The type of filter affects value of roundness error. There were many studies that explain the differences between filters theoretically and few of them have studied the differences practically. This study aims at introducing a practical comparison of the following filters (2CR50, 2CR75, 2CRPC50, 2CRPC75, Gaussian and no filter) in order to demonstrate the effect of each on roundness error values. RA-120 ROUNDTEST instrument was used for measuring out of roundness of 25 turned workpieces. Least squares reference circle (LSC), minimum zone reference circle (MZC), maximum inscribed reference circle (MIC) and minimum …

Antioxidant Deterioration In Active Composite Film During Storage, Anang Lastriyanto, Kurniawan Yuniarto, Cahyo Mustiko Okta Muvianto, Hary -. Kurniawan

Journal of Applied Packaging Research

Pure polylactic acid is widely used for packaging, but it has limitation due to its oxygen barrier property. We investigated oxygen scavenging active packaging by incorporating synthetic antioxidant butylated hydroxyl toluene (BHT) into matrix composite film (plasticized polylactic acid-natrium montmorillonite/NaMMT) using direct casting. The 2.2-Diphenyl-1-picrylhydrazyl (DPPH) or antiradical activity was used to investigate oxygen scavenging of butylated hydroxytoluene in PLA active composite film during 15 storage days at 30oC. Oxygen permeability was calculated by using ASTM F3136-15 method. BHT oxidation rate of the active film composite film was 0.043 times per day. The BHT was estimated fully deteriorate after 108 …

Tropospheric Attenuation Prediction For Future Millimeter Wave Terrestrial Systems: Estimating Statistics And Extremes, Jinwen Liu, David W. Matolak, Ismail Güvenç, Hani Mehrpouyan

Electrical and Computer Engineering Faculty Publications and Presentations

Tropospheric attenuations can be significant in the millimeter wave (mmWave) frequency bands; hence, accurate prediction modeling of tropospheric attenuation is important for reliable mmWave communication. Several models have been established by the International Telecommunication Union (ITU), yet estimation accuracy is limited due to the large spatial scales used for model input parameters. In this paper, we address this and apply local precipitation data to analyze tropospheric attenuation statistics and compare to results when using ITU regional input rain data. Specifically, tropospheric attenuation is predicted via simulations using the ITU method at 30, 60, and 90 GHz in four distinct geographic …

Experimentally Measured Lumbar Skin Strains During Activities Of Daily Living, Andrew Gibbons, Paul Mcmullin, Darian Emmett, Ulrike H. Mitchell, David T. Fullwood, Anton E. Bowden

Student Works

Introduction: When mechanical stimulation of the skin, post-surgery, is kept at a minimum, the risk for hypertrophic scarring is reduced. Therefore, surgeons have utilized different tools for optimal scar outcomes such as cutting along or perpendicular to the Langers lines or collagen fiber orientation^1,2. However, biomechanical strains induced in the skin during activities of daily living (ADL) are the primary mechanism for suture opening, and increased awareness of these strains may provide informative insights to both pre-operative incision planning, as well as post-operative counseling with the patient regarding specific activities that may lead to wound re-opening.

Methods: Data …

Ionic Liquid Pilocarpine Analog As An Antiglaucoma Drug Candidate, Juan Wang, Boxuan Li, Jing Tang, Li Qiu, Xin Qiao, Na Xu, Hu Yang

Chemical and Biochemical Engineering Faculty Research & Creative Works

Ionic liquid pilocarpine analog [Pilo-OEG]Cl, the first-of-its-kind ionic liquid antiglaucoma drug candidate, is synthesized and reported. To synthesize [Pilo-OEG]Cl, pilocarpine was reacted with the oligo-polyethylene glycol chloride, 2-[2-(2-chloroethoxy)ethoxy] ethanol, to form an ionic liquid molecule with an imidazole cation and a chloride anion. The chemical structure of [Pilo-OEG]Cl was confirmed with 1H NMR spectroscopy. Compared with pilocarpine (Pilo) and pilocarpine hydrochloride (PiloHCl), [Pilo-OEG]Cl has improved structural stability according to pH measurements and LC-MS analysis. The corneal permeability coefficient of [Pilo-OEG]Cl is 2-fold higher than that of Pilo and 8-fold higher than that of PiloHCl. [Pilo-OEG]Cl does not show apparent toxicity …

Atherogenic Potential Of Microgravity Hemodynamics In The Carotid Bifurcation: A Numerical Investigation, Philippe Sucosky, Varun Vinayak Kalaiarasan, Graham B. Quasebarth, Patricia Strack, Jason A. Shar

Open Access Publishing Fund Collection

Long-duration spaceflight poses multiple hazards to human health, including physiological changes associated with microgravity. The hemodynamic adaptations occurring upon entry into weightlessness have been associated with retrograde stagnant flow conditions and thromboembolic events in the venous vasculature but the impact of microgravity on cerebral arterial hemodynamics and function remains poorly understood. The objective of this study was to quantify the effects of microgravity on hemodynamics and wall shear stress (WSS) characteristics in 16 carotid bifurcation geometries reconstructed from ultrasonography images using computational fluid dynamics modeling. Microgravity resulted in a significant 21% increase in flow stasis index, a 22–23% decrease in …

Pre-Eruptive Excess Volatiles And Their Relationship To Effusive And Explosive Eruption Styles In Semi-Plugged Volcanoes, Sri Budhi Utami, Juan Andùjar, Fidel Costa, Bruno Scaillet, Hanik Humaida, Simon Carn

Michigan Tech Publications, Part 1

Understanding the role of various factors influencing eruption style is challenging, but it can aid in adapting different hazard mitigations and crisis responses for explosive or effusive events. Here, we focus on the role of magma storage conditions in controlling eruption styles at basaltic andesite volcanoes, and how they can be related to monitoring data. We study the cycle of explosive (1990, sub-Plinian) → effusive (2007, dome) → explosive (2014, sub-Plinian) eruptions from Kelud (Kelut) volcano, Indonesia. We conducted petrological analyses of the eruption products and phase equilibria experiments using pumice and explored a range of temperatures, pressures, oxygen fugacity, …

Improving Ideation Of User Actions Using A Novel Ideation Method, Thomas L. Ashworth

Theses and Dissertations

During early stages of the design process, ideation methods are used to generate a set of potential solutions based on a particular need. Solutions to design problems generally require both technology and user actions (or tactics) of some sort, although solution ideas may omit explicit mention of either technology or tactics. Previous research suggests that an explicit consideration of tactics in early-stage ideation enables design teams to improve the quantity, quality, variety, and novelty of their idea sets. In this paper, a novel ideation method known as the Random Prompts method is presented, and its performance is evaluated against a …

Mathematical Model For Sei Growth Under Open-Circuit Conditions, Shiv Krishna Madi Reddy, Wei Shang, Ralph E. White

Faculty Publications

A solid electrolyte interphase (SEI) growth model is developed in a mixed mode that contains solvent diffusion through the SEI layer and corresponding solvent reduction kinetics at the SEI/electrode interface. The governing equations are solved by the Landau transformation, which makes the moving layer fixed to predict the open circuit potential, SEI layer thickness, and capacity loss. The estimated parameters fitted with experimental data from the literature are computed using COMSOL and MATLAB. Results show that the mixed mode model predicts lower capacity loss and thinner SEI layer due to its growth under open circuit conditions than previously reported by …

Height Information Aided 3d Real-Time Large-Scale Underground User Positioning, Houbing Song, Chengkai Tang, Cunle Zhang, Lingling Zhang, Yi Zhang

Publications

Due to the cost of inertial navigation and visual navigation equipment and lake of satellite navigation signals, they cannot be used in large‐scale underground mining environment. To solve this problem, this study proposes large‐scale underground 3D real‐time positioning method with seam height assistance. This method uses the ultrawide band positioning base station as the core and is combined with seam height information to build a factor graph confidence transfer model to realise3D positioning. The simulation results show that the proposed real‐time method is superior to the existing algorithms in positioning accuracy and can meet the needs of large‐scale underground users.

Leveraging Natural Learning Processing To Uncover Themes In Clinical Notes Of Patients Admitted For Heart Failure, Ankita Agarwal, Krishnaprasad Thirunarayan, William Romine, Amanuel Alambo, Mia Cajita, Tanvi Banerjee

Computer Science and Engineering Faculty Publications

Heart failure occurs when the heart is not able to pump blood and oxygen to support other organs in the body as it should. Treatments include medications and sometimes hospitalization. Patients with heart failure can have both cardiovascular as well as non-cardiovascular comorbidities. Clinical notes of patients with heart failure can be analyzed to gain insight into the topics discussed in these notes and the major comorbidities in these patients. In this regard, we apply machine learning techniques, such as topic modeling, to identify the major themes found in the clinical notes specific to the procedures performed on 1,200 patients …

How Engineering Education Guilds Are Expanding Our Understanding Of Propagation In Engineering Education, Kaitlin Mallouk, Alexandra C. Strong, Darby R. Riley, Courtney J. Faber

Henry M. Rowan College of Engineering Departmental Research

Background: The National Science Foundation (NSF) and other organizations have spent millions of dollars each year supporting well-designed educational innovations that positively impact the undergraduate engineering students who encounter them. However, many of these pedagogical innovations never experience widespread adoption. To further the ability of innovation developers to advance engineering education practice and achieve sustained adoption of their innovations, this paper focuses on exploring how one community-based model, engineering education guilds, fosters propagation across institutions and individuals. Engineering education guilds seek to work at the forefront of educational innovation by creating networks of instructor change-agents who design and implement a …

Overview Of Arbitrarily High-Order Adjoint Sensitivity And Uncertainty Quantification Methodology For Large-Scale Systems, Dan Gabriel Cacuci

Faculty Publications

This work reviews from a unified viewpoint the concepts underlying the “nth-Order Comprehensive Adjoint Sensitivity Analysis Methodology for Response-Coupled Forward/Adjoint Linear Systems” (nth-CASAM-L) and the “nth-Order Comprehensive Adjoint Sensitivity Analysis Methodology for Nonlinear Systems” (nth-CASAM-N) methodologies. The practical application of the nth-CASAM-L methodology is illustrated for an OECD/NEA reactor physics benchmark, while the practical application of the nth-CASAM-N methodology is illustrated for a nonlinear model of reactor dynamics that exhibits periodic and chaotic oscillations. As illustrated both by the general theory and by the examples reviewed in this work, both the nth-CASAM-L and nth-CASAM-N methodologies overcome the curse of dimensionality …

Microgrid Energy Management During High-Stress Operation, Thomas Price, Gordon Parker, Gail Vaucher, Robert Jane, Morris Berman

Michigan Tech Publications, Part 1

We consider the energy management of an isolated microgrid powered by photovoltaics (PV) and fuel-based generation with limited energy storage. The grid may need to shed load or energy when operating in stressed conditions, such as when nighttime electrical loads occur or if there is little energy storage capacity. An energy management system (EMS) can prevent load and energy shedding during stress conditions while minimizing fuel consumption. This is important when the loads are high priority and fuel is in short supply, such as in disaster relief and military applications. One example is a low-power, provisional microgrid deployed temporarily to …