Engineering Commons^™

Dynamics Of Running Processes In The Area Of Underless Water Intake, D.R. Bazarov, M.P. Tashkhanova, A. Gayur, M. Sapaeva

Irrigation and Melioration

The paper analyzes the dynamics of channel processes based on the results of field studies of the Amudarya River at the site of the damless water intake to the Karshi Magistralny Canal (KMK) and developed recommendations for improving the water intake conditions. Based on the results of field studies of the head section of the inlet channel, an assessment of the state of the Amudarya river bed in the water intake zone was made. The results of studies of the hydraulic and alluvial regimes of the Amu Darya River in the area of the damless water intake are generalized The …

Determination Of The Optimal Hydromodule Of Irrigation Network For Drip Irrigation, R.Zh. Karshiev, A. Urazkeldiev, A.H. Radjabov, A.I. Ernazarov

Irrigation and Melioration

Most of the irrigation canals operating in the country were built in the 60s and 80s of the XX century, their hydraulic parameters were designed and adapted to the irrigation regimes of agricultural crops, mainly for surface irrigation, and the average hydromodule values were 0,8-1,0 l / s. , the hydraulic parameters of the channel are designed to carry large volumes of water in a short period of time. Over the next 3-4 years, the introduction of water-saving technologies in the irrigation of agricultural crops by farms and "Clusters" requires the improvement of hydraulic methods of irrigation management, the use …

Assessment Of The Impact Of Climate Change On Hydrological Processes In The Chirchik River Basin, Kh.Sh. Gafforov, Sh.D. Sh.D.Tursunboev

Irrigation and Melioration

The importance of assessing past and future climate differences plays an important role in future planning in relation to climate change. This situation requires urgent and concerted action in several areas: technology, infrastructure, politics, economics, and the environment. The article evaluates the impact of changes in precipitation intensity on the water level in the global circulation model (GCM) RCP 4.5 and 8.5 scenarios in the 2030s, 2050s, and 2070s. This study is a useful reference for improving water resource management and ensuring the sustainability of agricultural products in the future, as well as for improving operational water management and agricultural …

Assessment Of The Impact Of Climate Change On Hydrological Processes In The Chirchik River Basin, В.K. Saliev

Irrigation and Melioration

The article examines the assessment of the state and problems of irrigation water use in the republic in the past and in the near future. A comparative analysis of the state of water resources use for the period of the last 30 years from 1989 to 2019 was carried out.According to the estimates, own water withdrawal for 5 years (2014/15-2018/19) shows that an average of 53.2 m3, including 50.5 billion m3 from rivers At present (2018-2019), an average of 57.06 billion m3 of water is taken for irrigation of 4.289 million hectares of land, against 63.02 billion m3 approved in …

Environmental Damage Caused By Transport Equipment Waste, M. Radkevich, K. Shipilova, M. Abdukodirova, O. Pochugevski

Irrigation and Melioration

The article suggests a new approach to the monetary assessment of the damage caused to the environment by the processed waste of the transport sector. The proposed assessment method is based on the waste collection factor, all types of irretrievable losses and the volume of necessary compensatory release of materials. Based on a survey among vehicle owners, it was found that the solid waste collection rate is about 50 %, while the waste collection rate for operating fluids does not exceed 32 %. In this regard, the bulk of the damage to the environment is caused by liquid waste. Calculations …

Research Of Stress-Deformed State Of Multi-Connected Complex Shell Structures, Т.М. Маvlanov, Sh.O. Khudainazarov, B. Yalgashev, O.S. Nurova

Irrigation and Melioration

Conducting numerical experiments for complex structurally inhomogeneous structures allows us to understand the qualitative picture of the effect of various parameters in a wide range of studies and to give sound recommendations at the design stage for conducting laboratory model and field experiments. In this paper, on the basis of the classical theory of elasticity, the basic equations characterizing the stress-strain state of complex multiply connected shell structures are given and a specific problem is solved. At the same time, some of the structural elements have viscoelastic properties. When solving the problem, the behavior of the structure for the n-th …

To The Determination Of The Critical Circuit Speed Of The Sharing Drum, Kh. Kh. Igamberdiev, A.B. Mukhitdinov

Irrigation and Melioration

The article is devoted to the theoretical definition of the critical circumferential speed of the stripping drum of a kena harvester, which depends on the drum diameter, diameter and weight of the stems. It was determined from the equality of the change in the momentum of the stem during impact, i.e. from a shock impulse acting on the stem. The shock impulse is determined when the drum blade touches the stem in the process of stripping, which acts on the mass of the entire stem. The duration of the impact of the drum stripping on the stem was determined from …

An Innovative Seeder For Sowing Non-Loose Seeds Of Saxaul And Cherkez, E.T. Farmonov

Irrigation and Melioration

The main reasons for the absence of a seeder for mechanized sowing of non-loose seeds of fodder plants in deserts are analyzed in the article. The author has developed a technology for sowing non-loose seeds (saxaul and cherkez), which prevents clogging, crushing and breakage in the seeder hopper, and provides for uniform and stable sowing at a set rate and shallow depth over the entire field area without reducing the biological germination. An innovative seeder with a universal sowing unit is recommended. Field tests of the innovative seeder with the proposed universal sowing unit were conducted in February 2020, as …

Recommendations For The Analysis And Safety Assessment Of Turbid Sediments In Flood Reservoirs, А. Yangiev, Sh. Panjiev, D. Adjimuradov

Irrigation and Melioration

The article presents the results of field research conducted in Langar, Dehkanabad, Shurabsoy flood reservoirs in the Kashkadarya region.There are many problems as a result of floods in the reservoirs, there are disturbances in the discharge and drainage facilities during the passage of accidental floods.At the same time, there was a large accumulation of turbid-sediments in flood reservoirs.In the article, the results of the calculations using empirical formulas for predicting the amount of turbid sediments in Langar, Dehkanabad, Shurabsoy flood reservoirs up to 2025-2030 years are also presented, and it is noted that at present their useless volumes are full …

Justification Of Parameters Of Replaceable Working Parts Of A Combined Machine, А.A. Akhmetov, L.B. Muratov

Irrigation and Melioration

In article are described the design and options for completing the replaceable working parts of the combined machine for continuous tillage which of the formation of ridges and ridges for sowing re-crops. The parameters of the ridge former and apron-leveler of this machine have been substantiated. The rational values of the parameters of the comb-former are: length 600 mm, width of the entrance edge 680 mm, height of the blade 160 mm, length of the side edge of the blade 178 mm. The rational values of the working length and height of the leveling apron are 220 mm and 200 …

Development Of An Algorithm For Optimization Of Continuous Technological Process Of Cultivation Of Microorganisms, Sh.R. Rakhmanov

Irrigation and Melioration

In article the analysis of possible modes of microalgae cultivation has been carried out. Two optimization algorithms are substantiated. The first one is based on the method of random search with an absolute bias, an algorithm for optimizing the process of cultivating microorganisms with continuous regeneration of the flow in one cultivator. The second is an algorithm for determining the optimal residence time of chlorella particles in multistage cultivators, focused on the method of dynamic programming, implemented in Wellman's recurrence relation. The developed algorithm for operational forecasting and automatic control of the chlorella cultivation process allows, under given production conditions …

Covid-19 Impact To Family Food Consumption And Income In Uzbekistan: Results Of An Online Survey, Kh. Pardaev, Sh. Hasanov, S. Mamasoliev, Sh. Muratov, R. Kalandarov, U. Nurullaev

Irrigation and Melioration

This article aims to study the impact of the pandemic on food consumption by families in Uzbekistan. The shock of the pandemic is threatening the well-being of families in Uzbekistan, as in all developing countries. The study focuses on the effects of changes in food prices, declining consumption, and changes in household incomes. The Instrumental regression model was used in the factor impact analysis. Data for analysis were collected online by messenger groups from families in urban and rural areas of Uzbekistan. Results of the Econometric analysis demonstrated that the decline in food consumption in households was assessed by a …

Status Of Crop Diversification And Its Empirical Analysis: A Case Study Of The Republic Of Uzbekistan, A.E. Primov

Irrigation and Melioration

The main objective of this study is to determine the status and level of crop diversification among farms in the country through an empirical analysis using panel data collected in 2009-2017. In doing so, we performed the Stata-16 software using the Simpson Diversification Index model in determining the diversification index. According to the results, the highest diversification indicators were found for Samarkand, Fergana and Tashkent regions, respectively, and accounted for 0.74, 0.74 and 0.76, respectively. It can be seen that the existing farms in Tashkent region used more diversified crops than in other regions of the country. The average diversification …

Efficiency Of Using Graphic Software In The Design Of Hydrotechnical Structures, U.A. Nasritdinova, A.M. Khodjaev, Z.I. Kayumova

Irrigation and Melioration

The article examines the work of scientists engaged in research in this area in the design of hydrotechnic structures. The possibilities of design programs for the application of the results of scientific research in the educational process were used. Thanks to the design in these programs, practical tasks are carried out with the utmost precision. The use of computer technology in teaching the subject "Hydrotechnical structures" and the use of graphic software AutoCAD in the design of linear platforms for clothing, curved platforms for clothing from hydrotechnical structures are shown in 2D and 3D three-dimensional modeling.

A Plug&Play Approach For Modeling And Simulating Applications In The Era Of Internet Of Social Things, Zakaria Maamar, Mohamed Sellami, Fatma Masmoudi, Muhammad Asim, Abdul Haseeb, Thar Baker, Fadwa Yahya

All Works

This article presents an approach to model and simulate Plug&Play social things. Confined into silos, existing (not social) things are restricted to basic operations like sensing and actuating, which deprive them from participating in the satisfaction of complex business applications. Contrarily, social things are expected to engage in collaborative scenarios and to tap into specific relations that connect them to peers when achieving these scenarios. These relations are referred to as complimentary, antagonism, and competition, and allow to develop networks of things. To capitalize on such networks, the approach to model and simulate Plug&Play social things puts forward four stages …

Étude De L’Applicabilité De Haut-Parleurs Paramétriques Au Développement De Nouveaux Concepts D’Alarmes De Recul, Olivier Robin, Alain Berry, Hugues Nélisse

Rapports de recherche scientifique

L’utilisation d’alarmes de recul est obligatoire sur une majorité de véhicules lourds et reste un moyen largement utilisé pour prévenir et alerter les personnes œuvrant à proximité de ces véhicules. Des études antérieures, réalisées par l’IRSST, ont montré les limites d’efficacité des alarmes utilisées en milieu de travail pour minimiser le risque à la sécurité des travailleurs. De plus, les alarmes de recul, par le son de niveau élevé et très typé qu’elles produisent, sont régulièrement une source de nuisance importante pour les travailleurs, et aussi pour les riverains. Ces problèmes de gêne et de perception sonore pour les travailleurs …

Thermoelectric Generation And Thermophysical Properties Of Metal Oxide Nanofluids, Xinran Hou, Rong-Tsu Wang, Shaowen Huang, Jung-Chang Wang

Journal of Marine Science and Technology–Taiwan

This study describes the comprehensive characterization of the diverse water-based nanofluids involving aluminum oxide, titanium dioxide, and zinc oxide nanoparticles, which were prepared through the two-step synthesis method assisted by a microemulsion ultrasound skill with effects of both weight-percent concentration (wt.%) in the range of 1.0% and 5.0% and between 20 ^oC and 40 ⁰C. The mean cluster size, zeta potential, pH value, viscosity, thermal conductivity, absorbance, light absorption, and electrical charge density of the various nanofluids were surveyed by relative experiments. The results showed that the 2 wt.% Al₂O₃, 2 wt.% TiO_{2 …}

Wireless Sensor Network-Based Monitoring Of Bridge Pile Foundations For Detecting Scouring Depth, Han-Tang Huang, H. Ping Tserng, Ruei-Yu Hou, Mirosław Skibniewski

Journal of Marine Science and Technology–Taiwan

Climate change brings about unprecedented increases in the occurrence of storms and flooding. In response to increased risk of bridge pier scouring, there is a need for increased safety monitoring of bridges. This paper presents a wireless sensor network (WSN) - based solution developed to measure micro-vibrations of a bridge pier. Test measurement values are converted with the use of the Fast Fourier Transform (FFT) method to obtain natural frequencies. Scouring depth of the pier is estimated with the use of a Finite Element Method model. WSN is used to collect the signal and to test data transmission stability in …

A New Fuzzy Dea Model For Solving The Mcdm Problems In Supplier Selection, Chi-Mao Tsai, Hsuan-Shih Lee, Guo-Ya Gan

Journal of Marine Science and Technology–Taiwan

Supplier selection is a crucial task in supply chain management, and good supply chain management is essential to a company's ability to develop sustainably and gain the trust and satisfaction of its customers. In modern supply chain management, supplier selection often takes the form of a multi-criteria decision-making (MCDM) problem. Thus, to solve this problem, this study formulated a novel fuzzy MCDM model, which is based on the fuzzy data envelopment analysis model. This novel approach can transform the linguistic variables of assessment criteria into well-founded quantitative data for calculation. Moreover, our approach can effectively discriminate between decision-making units (both …

Evaluation Of The Human Discomfort Caused By Ship Vibrations, Laurentiu Picu, Eugen Rusu

Journal of Marine Science and Technology–Taiwan

The present work analyzes the subjective responses of people exposed to transient vibrations caused by systems with a single degree of freedom. In this context, the main objective of the research was to identify the main effect of vibrations on people's well-being at work (in particular on vessels crew) and to discover those frequencies that lead to the greatest discomfort. In order to achieve this goal, 12 laboratory experiments were carried out involving ten male subjects in good health, aged between 28 and 42. The variables of the vibratory system considered are: acceleration (4.8 ÷ 8.6 m/s¡2), amplitude (1 ÷ …

Application Of Physically Based Semi-Distributed Hec-Hms Model For Flow Simulation In Tributary Catchments Of Kaohsiung Area Taiwan, Fiaz Hussain, Ray-Shyan Wu, Kai-Chun Yu

Journal of Marine Science and Technology–Taiwan

Hydrologic modeling is a commonly used tool to understand the rainfallerunoff processes of gauged and ungauged catchments for proper quantitative estimation of water resources availability. In the present study, an attempt is made to simulate surface runoff using a physically based semi-distributed hydrological (HEC-HMS) model for four local-scale tributary catchments of Kaohsiung area Taiwan. The input physical parameters of the model were calculated and preprocessed in HEC-GeoHMS based on digital elevation model (DEM), land use, soil and hydro-meteorological data. The model performance was satisfactory with Nash Sutcliffe Efficiency (NSE) ¼ 0.51 to 0.86 and the coefficient of determination (R2) ¼ …

Evaluating Key Factors Of Container Shipping Lines From The Perspective Of High-Tech Industry Shippers, Chien-Lung Hsu, Tien-Chun Ho

Journal of Marine Science and Technology–Taiwan

Because of the changes in customers' needs and demands created by the development of container transport in the 1960s, the global container transport business has become increasingly competitive. With the high-tech industry ranged with one of the few competitive industries in Taiwan from 2002, container shipping lines have been forced to implement innovative operating patterns to meet the evolving demands of the high-tech industry shippers. This study conducts a survey questionnaire of domestic high-tech industry shippers to explore the different factors affecting their selection of container shipping lines, evaluating the key influencing factors by maritime marketing's 4C framework: customer needs, …

Beach Topography Surveying Using Unmanned Aerial Vehicle Photogrammetry Technology, Hui-Ming Fang, Kuan-Tsung Chang, Sung-Shan Hsiao, Shih-Peng Chiang

Journal of Marine Science and Technology–Taiwan

The mechanisms of in situ topography changes must be identified for spatial planning in coastal areas. In this study, the authors used in situ direct measurement methods and indirect remote-sensing technologies to develop a method for beach topography surveillance. Unmanned aerial vehicles (UAVs) have advantages of high portability and mobility and low operating altitude. Therefore, a UAV was equipped with a lightweight camera and a positioning system that comprised a global positioning system and an inertial measurement unit. Aerial photogrammetry and aerial triangu-lation methods were adopted for matching image feature points to obtain the corresponding topographic points in the sand. …

Stream Power Analysis Of The Mid-Barataria Conveyance Channel Model, Jack Graham

LSU Master's Theses

Louisiana’s coast is disappearing at an alarming rate. Erosion, subsidence, sea level rise, and the devastating impacts from hurricanes have contributed to the loss of thousands of square miles of land that was once a thriving ecosystem. The Louisiana government is taking action to help protect and restore these coastal habitats, which are a home to some two million people and numerous species of animals, birds, and fish. The Mid-Barataria Sediment Diversion is a new type of project to help create land in Barataria Basin. Conceptually, the diversion is designed to use the available sediment and stream power provided by …

Adsorption And Transport Of Colloids At Interface And In Bulk, Jingyun Lee

LSU Doctoral Dissertations

Colloids are suspensions of microscopic insoluble particles dispersed in a continuum phase such as liquid or gas. Colloids are found in our everyday life from food and cosmetic industries to pharmaceutical and biomedical applications. Depending on a global minimum of the free-energy landscape, colloidal suspensions can be classified as two major classes: equilibrium or active colloidal system. This Ph.D dissertation presents strategies to engineer equilibrium self-assembled structures and out-of-equilibrium active matter using various interparticle forces.

First, we introduce the means to promote the equilibrium self-assembled structures driven by adsorption of colloids at interface. Typically, adsorption of colloids at interface is …

Development Of A New Technology For Obtaining The Substance Of The Drug Acetamizole, Sarvar Saidov, Asqar Abdurazakov, Rixsibay Karimov, Mavluda Baltabayeva

Chemical Technology, Control and Management

The main goal of this work is to obtain a preparation of acetamizole based on local raw materials by a more convenient method of acylation of 2-methoxycarbonylaminobenzimidazole with glacial acetic acid, this synthesis method is proposed for the first time. On the basis of the conducted experiments, favorable conditions for the reaction were found, the influence of the nature of the acid, the temperature, the duration of the reaction and other factors on the course of the reaction was studied, the technology was developed and implemented at the experimental production of "IHRV AN RUz". Based on experiments conducted by scientists …

Methodology For Determination And Assessment Of Uncertainty Sources Of Textile Materials Total Thermal Resistance, Abdurauf Abdurashidovich Abdukayumov, Ortagoli Sharipovich Hakimov

Chemical Technology, Control and Management

The problems of improving of methods for determination of the total thermal resistance of textile materials are considered. A comparative analysis of the applied methods based on stationary and non-stationary heat exchange is performed. A higher accuracy of non-stationary methods based on measuring the cooling time of a heat cell with subsequent determination of the cooling rate and the total thermal resistance of the material under study is noted. A method is proposed for estimating the variance of the main values required for calculating the total thermal resistance of materials. The results of the study of the relationship between sources …

Analysis Of Consistency Of Similarity Predicates To Measures Of Similarity And Advantages Of Their Application In Digital Systems For Solving Intellectual Problems, Makhmudjon Abdullaev, Nodira Batirdjanovna Alimova

Chemical Technology, Control and Management

The results of the analysis of the correspondence of similarity predicates to similarity measures used in various metric methods used for signal classification and the feasibility of using similarity predicates in the construction of digital systems for solving intellectual problems, for which the simplification of computational operations is of no small importance, are presented. Some general and distinctive features of the similarity predicate are considered in comparison with the euclidean metric in relation to one-dimensional and two-dimensional spaces, and generalized to the case of n-dimensional metric spaces. The expediency of using methods based on the calculation of similarity predicates, which …

Synthesis Of Control Systems For Multidimensional Dynamic Objects Under Parametric Uncertainty Based On The Invariance Theory, U.F Mamirov

Chemical Technology, Control and Management

The problems of synthesis of control systems for multidimensional dynamic objects in the conditions of parametric uncertainty which are based on invariance theory are considered. When constructing stable synthesis algorithms, a recurrent method for determining pseudo-solutions of linear algebraic systems of equations is used. Computational algorithms for the solution based on singular matrix expansions are given. These computational procedures allow us to regularize the problem of synthesis of the considered algorithms for the synthesis of control systems for multidimensional dynamic objects under conditions of parametric uncertainty and improve the quality indicators of control processes.

Calculate The Reliability Of The Bts-Bsc Network With The Reserved Line Connection, Dilmurod Davronbekov, Utkir Karimovich Matyokubov

Chemical Technology, Control and Management

The issue of reserving communication lines between the base station and the mobile network base station controller which are considered as one system is considered. Analytical expressions have been developed for calculating the reliability of the system for various options for backing up communication lines between the base station and the base station controller. The results of research and calculations of reliability for ten different types of backup communication lines of the base station and the base station controller are presented.