Engineering Commons^™

City Farm Slo - Walk-In Produce Coolbot Cooler, Connor Morinini

Construction Management

This paper describes the planning, financing, and construction of a commercial sized refrigerator for a non-profit urban farm in San Luis Obispo, CA, called City Farm SLO. Construction of the project occurred over a nine-month period from September of 2020 to May of 2021. The project involved building a Tuffshed, site grading, framing a room inside the Tuffshed, hanging a door, installing electricity inside the room, insulating the interior, painting the exterior, installing an air conditioner, and wiring the Coolbot to the air conditioner. The project was built to allow the non-profit organization to begin storing their agricultural crops in …

Optical And Structural Properties Of Manganese-Doped Zinc Oxide Grown By Metal-Organic Chemical Vapor Deposition, Vishal Saravade, Zahra Manzoor, Alexis Corda, Chuanle Zhou, Ian Ferguson, Na Lu

Electrical and Computer Engineering Faculty Research & Creative Works

This systematic study investigates the optical properties and process−structure−property relationships of Mn-doped zinc oxide (ZnMnO) grown by metal-organic chemical vapor deposition with varying Mn-doping concentration and growth conditions. ZnMnO exhibits a good crystal quality oriented in the (002) direction and contains intermixtures of zinc oxide (ZnO)-like and manganese oxide (MnxOy)-like phases. The material exhibits a direct energy absorption band-edge and a reduction in bandgap with Mn-doping. Photoluminescence studies show that Mn-doping can simultaneously tailor broad green band luminescence and ultraviolet edge emissions. Post-growth air-annealing results in broad MnxOy-related photoluminescence emissions at 3.3–4.5 eV. A further reduction in the absorption band-edge …

Double-Acting Batch Reverse Osmosis Configuration For Best-In-Class Efficiency And Low Downtime, Sandra Cordoba, Abhimanyu Das, Jorge Leon, Jose M. Garcia, David M. Warsinger

School of Mechanical Engineering Faculty Publications

Energy consumption in reverse osmosis has decreased substantially over the last few decades thanks to the implementation of energy recovery devices, high efficiency pumps, and improved membranes. However, to further increase the adoption of the technology, its energy needs must still be reduced. Batch and semi-batch reverse osmosis configurations have shown potential to be the most energy efficient reverse osmosis variants, but have remaining inefficiencies from brine mixing and high downtime. In this study, we modeled in new detail a further improved double-acting batch reverse osmosis system that uses a high-pressure tank with a reciprocating piston. A high-pressure pump is …

Automating Deep-Sea Video Annotation, Hanson Egbert

Master's Theses

As the world explores opportunities to develop offshore renewable energy capacity, there will be a growing need for pre-construction biological surveys and post-construction monitoring in the challenging marine environment. Underwater video is a powerful tool to facilitate such surveys, but the interpretation of the imagery is costly and time-consuming. Emerging technologies have improved automated analysis of underwater video, but these technologies are not yet accurate or accessible enough for widespread adoption in the scientific community or industries that might benefit from these tools.

To address these challenges, prior research developed a website that allows to: (1) Quickly play and annotate …

Simulation Of A Configurable Hybrid Aircraft, Brandon Bartlett

Master's Theses

As the demand for air transportation is projected to increase, the environmental impacts produced by air travel will also increase. In order to counter the environmental impacts while also meeting the demand for air travel, there are goals and research initiatives that aim to develop more efficient aircraft. An emerging technology that supports these goals is the application of hybrid propulsion to aircraft, but there is a challenge in effectively exploring the performance of hybrid aircraft due to the time and money required for safe flight testing and due to the diverse design space of hybrid architectures and components. Therefore, …

Bibliometric Review On Iot Based System For Remote Downloading On Microcontroller, Arundhati Bandopadhyaya Ms., Diya Dodwad Ms., Diviyanshi Gupta Ms., Surya Koyyana Mr., Parag Narkhede Mr., Shripad Deshpande Mr.

Library Philosophy and Practice (e-journal)

Working with sensors has become an area of expertise within the domain of electronic engineering. On a day to day basis, thousands of sensors are put to use around us, for instance, in smoke alarms, speedometers, motors, computers, radiators etc. to accumulate sensor data, cables that connect the sensors to the bottom station after which the information is worked on. But cabling is often expensive especially when handling large scale industrial applications ^[5]. For an equivalent reason, low-cost wireless networks came into the picture recently and are in high demand. A research paper we found during our review of …

Maize Tassel Detection From Uav Imagery Using Deep Learning, Aziza Alzadjali, Mohammed H. Alali, Arun Narenthiran Weeranampalayam Sivakumar, Jitender S. Deogun, Stephen Scott, James C. Schnable, Yeyin Shi

Department of Mechanical and Materials Engineering: Faculty Publications

The timing of flowering plays a critical role in determining the productivity of agricultural crops. If the crops flower too early, the crop would mature before the end of the growing season, losing the opportunity to capture and use large amounts of light energy. If the crops flower too late, the crop may be killed by the change of seasons before it is ready to harvest. Maize flowering is one of the most important periods where even small amounts of stress can significantly alter yield. In this work, we developed and compared two methods for automatic tassel detection based on …

Modeling Vadose Zone Hydrology [Lecture Notes], Derek M. Heeren, Dean E. Eisenhauer

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Modeling Vadose Zone Hydrology is a graduate-level course offered biennially in the Department of Biological Systems Engineering. Topics included hydraulic properties of porous media, application of Darcy's Law in variably saturated media, hydrologic and transport processes in the vadose zone, and solution of steady and unsteady flow problems using numerical techniques. A graphical approach for characterizing vertical one-dimensional problems with energy head profiles was emphasized. Common one-dimensional flow and transport problems were solved analytically. The course was taught using a combination of lecture notes and PowerPoint presentations. The lecture notes from 2021, captured using the Microsoft Whiteboard app with a …

Hands-Free Electric Skateboard, Blaise M. Bibolet

Electrical Engineering

An electric skateboard functions as a skateboard propelled by electric motors. It is usually controlled with a handheld controller. This project describes an electric skateboard controlled via weight distribution. To accelerate, the rider leans forward, and to decelerate, the rider leans backward. It can travel 17 miles per hour and has regenerative braking to recharge the battery.

Ultra-High-Energy Neutrino Detection Antenna Simulations, Nicholas C. Garcia

Electrical Engineering

Neutrinos allow researchers to investigate high-energy galactic phenomena, such as supernovae and black holes. Neutrinos interact with their surroundings via the weak nuclear force and therefore, travel unattenuated through space and are not deflected by electromagnetic fields. However, they do rarely interact with other particles. When neutrinos interact with nucleons (protons or neutrons) in a dielectric medium (i.e.: ice sheets), they are detectable through a cone of coherent electromagnetic radiation (Askaryan Radiation) created by the particle shower generated from the neutrino interaction [1]. The Radio Neutrino Observatory in Greenland (RNO-G) detects UHE neutrinos greater than 100 PeV (10¹⁵ eV) …

Illustrating Important Effects Of Second-Order Sensitivities On Response Uncertainties In Reactor Physics, Dan Gabriel Cacuci

Faculty Publications

This paper illustrates the relative importance of the largest first- and second-order sensitivities of the leakage response of an OECD/NEA reactor physics benchmark (a polyethylene-reflected plutonium sphere) to the benchmark’s underlying total cross sections. It will be shown that numerous 2nd-order sensitivities of the leakage response with respect to the total cross sections are significantly larger than the largest corresponding 1st-order sensitivities. In particular, the contributions of the 2nd-order sensitivities cause the mean (expected) value of the response to differ appreciably from its computed value and also cause the response distribution to be skewed towards positive values relative to the …

Study Of Electrodeposition Of Copper-Indium Material For Fabrication Of Cis Thin-Film Solar Cells, Leher Farooq

Theses

Abstract

Copper-Indium material for the fabrication of CIS/CIGS thin-film solar cells and for applications as an alloy is one of the most auspicious materials currently being studied and has attracted significant interest in solar energy and other industries. In the past, there have been several methods used for the fabrication of chalcopyrite thin-film solar cells. However, one of the best methods in the industry is electrodeposition, which employs the principles of electrochemistry to deposit materials on a working electrode. The cyclic voltammetry and constant potential deposition studies have been conducted for the electrodeposited copper indium material. In order to better …

Heat Transfer Intensification In Microchannel Heat Sinks (Mchs) - Wavy Channels Embedded With Pin Fins, Anas Mohammad Amin Alkhazaleh

Theses

This work conceptualizes heat sinks for electronics employing wavy/sinusoidal microchannels embedded with pin fins and subsequently analyzes their performance in terms of thermal resistance, pressure drop, maximum chip temperature, and the associated pumping power due to the pressure drop. The conceptualized wavy Microchannel Heat Sink (MCHS) is mathematically modeled using a combination of governing equations including energy equations, continuity equations, and Navier- Stokes equations. The performance of the wavy microchannel heat sink embedded with pin fins is evaluated based on a parametric study covering multiple parameters; microchannel’s amplitude, frequency, hydraulic diameter, pin fins’ diameter, and location, and Reynolds number. The …

Extraction And Bioactivity Evaluation Of Antioxidant Components From Teucrium Stocksianum Bioss Collected From Uae, Ahmad Ayman Al Salloum

Theses

Recently, the industry of Natural Bioactive Compounds (NBAC) is expanding dramatically due to its high medical potentials. High bioactivity of natural extracts from a wide range of plants is evident from the reported literature. For instance, NBACs show antibacterial, antifungal, antimicrobial, anti-inflammatory, anticancer and antioxidant activities. Teucrium stocksianum Boiss. from the Lamiaceae family is a known herb in the traditional medicine in United Arab Emirates. Multiple bioactivities of T. stocksianum were recorded such as anti-inflammation, analgesia, antioxidation, anticancer, antinociception and antimicrobial bioactivity. In this thesis, the extraction of NBACs from T. stocksianum was studied with Microwave-assisted extraction using Deep eutectic …

Experimental Investigation And Prediction Of Long-Term Effect Of Sustained Load And Harsh Environment On Fiber-Reinforced Polymer Composites, Amir Hussain Idrisi

Dissertations

In this dissertation the durability of thermoset composites was investigated under sustained load. Two thermoset composites, E-glass/epoxy and E-glass/polyurethane were immersed in seawater under sustained load (10%, 15%, 20%, 25% of failure load) and varying temperature (23°C to 95°C) for the period of 15 months. Mechanical, physical and thermal properties were experimentally investigated. The effects of temperature, moisture, and immersion time on the deterioration of the composite material were studied for both composites. It was observed that the weight of the samples increased with the immersion time and temperature for both the composites. The highest increase in weight of the …

Development And Characterization Of Sustainable Novel Aluminum Metal Matrix Composites, John Victor Christy

Dissertations

Low crude oil prices have impacted the economy of the Gulf Cooperation Council (GCC) member countries especially the United Arab Emirates (UAE). Hence it is vital to accelerate the diversification of the economy. Among the many potential diversification avenues, manufacturing is a promising area that could add to the GDP. This work brings out a sustainable and cost-effective method for manufacturing AMCs and expanding their applications.

This work deals with the processing and characterization of recycled AMCs manufactured using a novel approach. With the emphasis on sustainable manufacturing, this work aims to use Scrap Aluminum Alloy Wheels (SAAW) of cars …

Set Team Orienteering Problem With Time Windows, Aldy Gunawan, Vincent F. Yu, Andros Nicas Sutanto, Panca Jodiawan

Research Collection School Of Computing and Information Systems

This research introduces an extension of the Orienteering Problem (OP), known as Set Team Orienteering Problem with Time Windows (STOPTW), in which customers are first grouped into clusters. Each cluster is associated with a profit that will be collected if at least one customer within the cluster is visited. The objective is to find the best route that maximizes the total collected profit without violating time windows and time budget constraints. We propose an adaptive large neighborhood search algorithm to solve newly introduced benchmark instances. The preliminary results show the capability of the proposed algorithm to obtain good solutions within …

Hierarchical Reinforcement Learning: A Comprehensive Survey, Shubham Pateria, Budhitama Subagdja, Ah-Hwee Tan, Chai Quek

Research Collection School Of Computing and Information Systems

Hierarchical Reinforcement Learning (HRL) enables autonomous decomposition of challenging long-horizon decision-making tasks into simpler subtasks. During the past years, the landscape of HRL research has grown profoundly, resulting in copious approaches. A comprehensive overview of this vast landscape is necessary to study HRL in an organized manner. We provide a survey of the diverse HRL approaches concerning the challenges of learning hierarchical policies, subtask discovery, transfer learning, and multi-agent learning using HRL. The survey is presented according to a novel taxonomy of the approaches. Based on the survey, a set of important open problems is proposed to motivate the future …

First Train Timetabling And Bus Service Bridging In Intermodal Bus-And-Train Transit Networks, Liujiang Kang, Hao Li, Huijun Sun, Jianjun Wu, Zhiguang Cao, Nsabimana Buhigiro

Research Collection School Of Computing and Information Systems

Subway system is the main mode of transportation for city dwellers and is a quite signif-icant backbone to a city's operations. One of the challenges of subway network operation is the scheduling of the first trains each morning and its impact on transfers. To deal with this challenge, some cities (e.g. Beijing) use bus 'bridging' services, temporarily substitut -ing segments of the subway network. The present paper optimally identifies when to start each train and bus bridging service in an intermodal transit network. Starting from a mixed integer nonlinear programming model for the first train timetabling problem, we linearize and …

Ultrapin: Inferring Pin Entries Via Ultrasound, Liu, Ximing, Robert H. Deng, Robert H. Deng

Research Collection School Of Computing and Information Systems

While PIN-based user authentication systems such as ATM have long been considered to be secure enough, they are facing new attacks, named UltraPIN, which can be launched from commodity smartphones. As a target user enters a PIN on a PIN-based user authentication system, an attacker may use UltraPIN to infer the PIN from a short distance (50 cm to 100 cm). In this process, UltraPIN leverages smartphone speakers to issue human-inaudible ultrasound signals and uses smartphone microphones to keep recording acoustic signals. It applies a series of signal processing techniques to extract high-quality feature vectors from low-energy and high-noise signals …

When Program Analysis Meets Bytecode Search: Targeted And Efficient Inter-Procedural Analysis Of Modern Android Apps In Backdroid, Daoyuan Wu, Debin Gao, Robert H. Deng, Rocky Chang

Research Collection School Of Computing and Information Systems

Widely-used Android static program analysis tools,e.g., Amandroid and FlowDroid, perform the whole-app interprocedural analysis that is comprehensive but fundamentallydifficult to handle modern (large) apps. The average app size hasincreased three to four times over five years. In this paper, weexplore a new paradigm of targeted inter-procedural analysis thatcan skip irrelevant code and focus only on the flows of securitysensitive sink APIs. To this end, we propose a technique calledon-the-fly bytecode search, which searches the disassembled appbytecode text just in time when a caller needs to be located. In thisway, it guides targeted (and backward) inter-procedural analysisstep by step until reaching …

Comprehensive Characterization Of The Aerosol And Cloud Condensation Nuclei In The Uae, Farah Hassan Abdi

Theses

Cloud seeding has emerged as a significant alternative freshwater source in the United Arab Emirates (UAE). It is employed to manipulate weather conditions and increase precipitation in specific target regions. These efforts aim to densify clouds and enhance the likelihood of rainfall by inducing nucleation. This technique involves an operational crew aboard an aircraft that disperses substantial quantities of seeding particles, such as salts or silver iodide, into suitable clouds. These particles can serve as cloud condensation nuclei (CCN) and indirectly affect the rate of rainfall. In 2018, cloud seeding operations were responsible for approximately 10-15% of the UAE's total …

Assimilating Requirements Specification For Space Manned Missions: A Novel Approach, Khalfan Mohamed Al Remeithi

Theses

Aligned with the UAE Space Strategy 2117, which aims to establish the first inhabitable human on the Martian Surface by 2117, and with the current enthuse toward space tourism, the thesis proposes a novel framework to assimilate the process of requirement specification for a Manned Mission to Mars surface. Deep Space manned missions are unique and characterized by a set of specific requirements that should be elicited from different sources and stakeholders to ensure the missions’ success. In addition, these missions are highly dependent on the software components in the Command and Data Handling System (CDHS), which is used to …

Metallurgical And Thermal Processing Investigation Of Additively Manufactured Superalloys Jbk-75 And Nasa-Hr-1, Allyse Birken, Derek Noel

Materials Engineering

Aerojet Rocketdyne is investigating the use of directed energy deposition (DED), an additive manufacturing process, to reduce cost and lead time for manufacturing complex rocket engine components for their RS-25 engines. JBK-75 and NASA-HR-1, two Fe-Ni-base, age-hardenable (γ′) superalloys, are used for nozzle structural jackets and hot gas manifolds. Currently, these parts are produced using traditional forging or casting methods followed by intensive machining operations. Additionally, these alloys were designed for use in the wrought condition and require a different set of post-processing heat treatments when produced using DED due to their dendritic, segregated microstructure in the as-built condition. Homogenization …

Warren J. Baker Center For Science And Mathematics California Polytechnic State University, San Luis Obispo Campus, Matthew Hudson

Fire Protection Engineering: Culminating Experience Project Reports

The purpose of this report is to analyze the Warren J Baker Center for Science and Math on the California Polytechnic State University, San Luis Obispo campus. Baker Science is primarily used for classroom and laboratory instruction of college students, with study spaces, faculty offices, and assembly spaces. There are mechanical, electrical, and storage spaces ancillary to the main building functions. The building comprises six floors that are between 23,000 and 44,000 ft2. The first floor contains classrooms, faculty offices, mechanical/electrical spaces, and an auditorium with fixed seating. An atrium connects floors two through five. There are walkways running down …

Pod Stabilization, Lane Matthew Pledger, Becca Stefanich, Ian Mccandless, Patrick Salter, Kirk Kuran

General Engineering

We were tasked by Holmes Solutions to find a way to stabilize their patented SWITCHBACK passenger gondola system. This system is a self-propelled pod that transitions smoothly between cables and rails. The main goal for this project is to dampen side-to-side swing of gondola pods using a modular stabilization system. This device must be within these constraints: it must fit within a work envelope, must be safe for user and operator, must perform a dampening effect, and must be compliant with the current system. We formulated many ideas to achieve the goal, including making the pod more aerodynamic, adding sliding …

Sole On The Ocean Hotel, Dale Mcdowell

Fire Protection Engineering: Culminating Experience Project Reports

The following is an analysis of the fire protection systems and services at the Sole On The Ocean, Hotel (pronounced So-lay), Restaurant and Parking Building, located in Sunny Isles (Miami), Florida. Sole is used for temporary sleeping accommodations, business conference and restaurant purposes. The building is considered a high-rise building and is 24 Stories tall. The building occupancy classification is mixed used for Hotel (Residential), Restaurant (Assembly) and Parking (Storage). The prescriptive analysis was based on the Florida Building Code (FBC) which is identical to the International Building Code (IBC) with a few addendums. This report will adhere to the …

California Polytechnic State University – San Luis Obispo Building 180: Baker, Kelly Kessloff

Fire Protection Engineering: Culminating Experience Project Reports

This project was performed as part of the requirements for completion of the Fire Protection Engineering Master’s Program at Cal Poly. This project covers a full prescriptive and performance based analysis on the Warren J. Baker Center for Science and Mathematics. This building was constructed on Cal Poly’s campus in 2013 and serves occupancies such as classrooms, laboratories, and office space for students and professors.

The prescriptive based analysis of this report will analyze the applicable building codes and determine if this building is compliant. Relevant codes include the 2016 California Building and the 2016 California Fire Code. In addition …

Consumer-Ready Insulated Solar Electric Cooker, Simon Ford, Sachin Gokhale, Brendan Lynn, Richard Nguyen

Mechanical Engineering

An insulated solar electric cooker, or ISEC, converts solar energy into electricity to cook food, boil water, provide heat or even help charge batteries. In this project, the focus is an ISEC with a phase change material (PCM) that helps store heat when the solar energy input is minimal, such as after the sun has set. Although a successful ISEC already exists that utilizes PCM, this product can be improved in many ways. The specific revisions investigated in this report are the improvement of the thermal efficiency with the implementation of a vacuum-sealed outer pot, the reduction of the overall …

Interactive Physics Display: Air Cannon, Marina Smeltzer, Sydney Hosokawa, Jordan Nguyen, Jessica Ouyang

Mechanical Engineering

The San Luis Obispo Botanical Garden (SLOBG) is a non-profit organization that provides a place for visitors to connect with and explore nature. The sponsors from SLOBG sought an interactive physics display to be implemented in their children’s garden that will educate children and adult visitors about physics concepts in a welcoming and comfortable atmosphere. The research done showed that customers are looking for a “wow” factor with the display to surprise and engage them. Patents showed the design and build of interactive playground equipment. Government reports described the curriculum for the target audience and also outlined the safety precautions …