Engineering Commons^™

Transforming Technology & Engineering Educator Inputs Into Desired Student Outputs Through Mechanism Analysis And Synthesis, Andrew J. Hughes, Chris Merrill

Educational Leadership & Technology Faculty Publications

The intention of this article is to provide middle and high school Technology and Engineering Educators (T&EEs) with a more thorough understanding of an engineering approach to the teaching and learning of mechanics. During the teaching and learning of engineering content, in this case mechanics, the educator should attempt to align pedagogical content knowledge with engineering content knowledge and practices. T&EEs will also need to focus on terminology, structure, and applying theory to practical hands-on learning activities inside and outside of the classroom. T&EEs have the potential to foster middle and high school students’ mechanical knowledge and the ability to …

Impulse, Fall 2021, Matt Schmidt, Emily Weber, Christine Delfanian, Dave Graves, Micayla Standish

Impulse (Jerome J. Lohr College of Engineering Publication)

2 | Lohr Endows Dean Position
4 | Faculty News
8 | Prasad Receives NSF Career Award
12 | Jones Steps Aside
14 | Liu Already Busy at Work
15 | Hemphill Leads Heavy Highway Construction
16 | Hitting the Road for CIM Program
18 | Rave Precision Ag Center Opens
20 | 'Mr. Missouri River Energy Services' Honored
22 | Recalling the 1971 Crisis
26 | Students Help With Robotic Walker
28 | Liu Receives Sander Professorship
31 | SDSU Nabs 5 Tau Beta Pi Scholarships
32 | Chapter Honored
33 | Marcy Receives Leadership Honor
34 | Hackman …

Manufacturing: The Qualitative Study Of A Transition To A Green Facility, Brandon David Staves

Masters Theses & Specialist Projects

This qualitative study focused on answering three core questions: How have facilities reduce pollutions in regards to the quality of air, water, land, light and noise? Which Types of pollution reduction projects are more or less successful to implement? What types of pollution are facilities focusing on and why? The results of the 15 companies surveyed show a variety of projects that facilities have used to reduce pollution, it also shows that cost is a major factor in the unsuccessful projects, and that facilities are actively focused on reducing Air, Land, and Water pollution. While the data shows a variety …

Design Optimization And Experimental Study Of Coreless Axial-Flux Pm Machines With Wave Winding Pcb Stators, Peng Han, Damien Lawhorn, Yaser Chulaee, Donovin Lewis, Greg Heins, Dan M. Ionel

Power and Energy Institute of Kentucky Faculty Publications

This paper presents a systematic design optimization and experimental study of coreless axial-flux permanent magnet (AFPM) machines with wave winding printed circuit board (PCB) stators. Existing PCB winding configurations are briefly reviewed and compared to serve as a performance reference. A new concept –the “macro coil”– is proposed to model PCB stator windings in 3D finite element analysis (FEA) to facilitate large-scale multi-objective optimization with the winding eddy current losses evaluated in each design candidate. The detailed trace-by-trace model for a selected optimal design is then built to check the voltage difference between parallel paths and the resulting circulating currents. …

Crest Or Trough? How Research Libraries Used Emerging Technologies To Survive The Pandemic, So Far, Scout Calvert

University of Nebraska-Lincoln Libraries: Faculty Publications

Introduction

In the first months of the COVID-19 pandemic, it was impossible to tell if we were at the crest of a wave of new transmissions, or a trough of a much larger wave, still yet to peak. As of this writing, as colleges and universities prepare for mostly in-person fall 2021 semesters, case counts in the United States are increasing again after a decline that coincided with easier access to the COVID vaccine. Plans for a return to campus made with confidence this spring may be in doubt, as we climb the curve of what is already the second …

Model Optimization For Resource Allocation In A Consulting Firm, Riad Alharithi, Karthik Manjunath, Sara Ferdousi, Vladislav Ruchin, Jennifer Lynn Zeitouni

Engineering and Technology Management Student Projects

Assigning employees with multiple skill sets to projects at the right time has long been a challenge in professional settings. Whether it is assigning a salesperson to a product, an employee to a task, or a company to a project, many variables affect such decisions and make them taxing for managers and owners. In this project, an optimization issue observed in a team member’s workplace is being addressed.. The aim is to efficiently allocate employees to different concurrent projects. The firm's organizational structure is similar to a Project Management Office (PMO) that has an employee pool with varying skill sets …

Report On The Methodological Framework Of New Pedagogical Approaches – Scenarios Of Future Engneering Education, Bente Nørgaard, Claus Spliid, Una Beagon, Klara Kövesi, Brad Tabas, Riitta Lehtinen, Jenni Koponen, Johannes Spaas

Reports

This report summarises the methodology used to create scenarios as part of the innovative teaching pedagogies proposed in the A-STEP 2030 (Attracting diverSe Talent to the Engineering Professions of 2030) project. This project is an EU Erasmus+ project funded under call number 2018-1-FR01-KA203- 047854. The report begins by describing the overall project and the organisation of the learning and teaching activity. The scenarios were co-created with student participants and academic staff in the learning and teaching activity - A-STEP 2030 Summer School which was held in August 2021. The specific scenarios created by participants are described in this report and …

The Impact Of Gemba Walks On Preventative Maintenance Productivity, Jake Donald Taylor

Masters Theses & Specialist Projects

Gemba Walks are a tool to get management involvement in areas where the work is taking place. Gemba Walks allow individuals involved first-hand to voice and reduce waste within the process and general operations. This research measured the benefits and improvements Gemba Walks had on the availability of equipment. For example, reducing the number of events that equipment is down for maintenance and its duration to repair these events, therefore improved availability. Maintenance is a critical aspect of keeping a company running, and making improvements found during this research significantly impacted the company by creating lean improvements. The improvements focused …

Systematic Review And Regression Modeling Of The Effects Of Age, Body Size, And Exercise On Cardiovascular Parameters In Healthy Adults, Aseem Pradhan, John Scaringi, Patrick Gerard, Ross Arena, Jonathan Myers, Leonard A. Kaminsky, Ethan Kung

Publications

Purpose

Blood pressure, cardiac output, and ventricular volumes correlate to various subject features such as age, body size, and exercise intensity. The purpose of this study is to quantify this correlation through regression modeling.

Methods

We conducted a systematic review to compile reference data of healthy subjects for several cardiovascular parameters and subject features. Regression algorithms used these aggregate data to formulate predictive models for the outputs—systolic and diastolic blood pressure, ventricular volumes, cardiac output, and heart rate—against the features—age, height, weight, and exercise intensity. A simulation-based procedure generated data of virtual subjects to test whether these regression models built …

Plaque Contact Surface Area And Flow Lumen Volume Predict Stroke Risk In Extracranial Carotid Artery Stenosis, Ryan Gendey, Ethan Kung, Veena Mehta, Adam Brown, Matthew Bridges, Ravi Veeraswamy

Publications

The standard indication for intervention in asymptomatic disease is currently percent stenosis in the internal carotid artery as measured by the NASCET method, which remains limited in discriminating power. CT angiography (CTA) is widely used to calculate NASCET stenosis but also offers the opportunity to analyze carotid artery plaques from a morphological perspective that has not been widely utilized. We aim to improve stroke risk stratification of patients with carotid artery stenosis using plaque 3D modeling and image analysis. Patients with CTAs appropriate for 3D reconstruction were identified from an NIH designated stroke center database, and carotid arteries were segmented …

Deep Convolutional Correlation Particle Filter For Visual Tracking, Reza Jalil Mozhdehi

Dissertations (1934 -)

In this dissertation, we explore the advantages and limitations of the application of sequential Monte Carlo methods to visual tracking, which is a challenging computer vision problem. We propose six visual tracking models, each of which integrates a particle filter, a deep convolutional neural network, and a correlation filter. In our first model, we generate an image patch corresponding to each particle and use a convolutional neural network (CNN) to extract features from the corresponding image region. A correlation filter then computes the correlation response maps corresponding to these features, which are used to determine the particle weights and estimate …

Investigation Of Combinations Of Rationally Selected Bioengineered Nisin Derivatives For Their Ability To Inhibit Listeria In Broth And Model Food Systems, Laura Nyhan, Des Field, Colin Hill, Michael J. Callanan, Máire Begley

Department of Biological Sciences Publications

In this study, we examined the ability of nisin A and a rationally assembled bank of 36 nisin derivative producing Lactococcus lactis strains to inhibit Listeria. A broth-based bioluminescence assay for screening single and combinations of bioengineered nisin derivatives using cell-free supernatants (CFS) from nisin derivative producing strains was developed. In this way, we screened 630 combinations of nisin derivative producing strains, identifying two (CFS from M17Q + N20P and M17Q + S29E) which exhibited enhanced anti-listerial activity when used together compared to when used alone, or to the nisin A producing strain. Minimal inhibitory concentration assays performed with purified …

Physiological Processes, Chirag B. Raval

Open Educational Resources

Physiological Processes is designed to introduce fundamental concepts of physiology to biomedical engineering learners. Areas covered include: neural, muscular, cardiovascular, respiratory and renal system function; bioelectrical signals, capillary-level transport, organ-level exchange. Whenever possible, analysis will be quantitative in order to fulfill the course goals and to build the foundation for the subsequent biomedical engineering curriculum. This course is for Biomedical Engineering majors only.

Effects Of Cloud Computing In The Workforce, Kevin Rossi Acosta

Cybersecurity Undergraduate Research Showcase

In recent years, the incorporation of cloud computing and cloud services has increased in many different types of organizations and companies. This paper will focus on the philosophical, economical, and political factors that cloud computing and cloud services have in the workforce and different organizations. Based on various scholarly articles and resources it was observed that organizations used cloud computing and cloud services to increase their overall productivity as well as decrease the overall cost of their operations, as well as the different policies that were created by lawmakers to control the realm of cloud computing. The results of this …

Machine Learning For High-Fidelity Prediction Of Cement Hydration Kinetics In Blended Systems, Rachel Cook, Taihao Han, Alaina Childers, Cambria Ryckman, Kamal Khayat, Hongyan Ma, Jie Huang, Aditya Kumar

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The production of ordinary Portland cement (OPC), the most broadly utilized man-made material, has been scrutinized due to its contributions to global anthropogenic CO₂ emissions. Thus -- to mitigate CO₂ emissions -- mineral additives have been promulgated as partial replacements for OPC. However, additives -- depending on their physiochemical characteristics -- can exert varying effects on OPC's hydration kinetics. Therefore -- in regards to more complex systems -- it is infeasible for semi-empirical kinetic models to reveal the underlying nonlinear composition-property (i.e., reactivity) relationships. In the past decade or so, machine learning (ML) has arisen as a promising, …

Replication Data For: Evaluation Of Model Concepts To Describe Water Transport In Shallow Subsurface Soil And Across The Soil–Air Interface, Zhen Li, Kathleen Smits

Earth & Environmental Sciences Datasets - Archive

Soil water evaporation plays a critical role in mass and energy exchanges across the land–atmosphere interface. Although much is known about this process, there is no agreement on the best modeling approaches to determine soil water evaporation due to the complexity of the numerical modeling scenarios and lack of experimental data available to validate such models. Existing studies show numerical and experimental discrepancies in the evaporation behavior and soil water distribution in soils at various scales, driving us to revisit the key process representation in subsurface soil. Therefore, the goal of this work is to test different mathematical formulations used …

Replication Data For: The Effect Of The Top Soil Layer On Moisture And Evaporation Dynamics, Zhen Li, Kathleen Smits

Earth & Environmental Sciences Datasets - Archive

Understanding the effect of the top soil layer on surface evaporation and water distribution is critical to modeling hydrological systems. However, the dependency of near-surface soil moisture and fluxes on layering characteristics remains unclear. To address this uncertainty, we investigate how the arrangement of soil horizons affects the evaporation and soil moisture, specifically, the near-surface soil moisture, through the combination of numerical simulations and evaporation experiments. The characteristics of fluxes and moisture from different soil profiles are then used to understand the soil layering conditions. Results show that the top soil layer can significantly affect the evolution of soil moisture …

Fluids Demonstrations Iii: Viscous Flow In Modified Thin Enclosures, Centrifugal Effect, Vortical Flow, And Turbulence, Said Shakerin

All Faculty Articles - School of Engineering and Computer Science

Several new devices that demonstrate a variety of known phenomena in fluid dynamics are presented. These add on to a recent collection of demonstrations and follow the same design features as documented earlier (self-contained, easy to use, low cost). Descriptions are provided to enable replication by others, using readily available materials. The significance of each demonstration is outlined and background information on the relevant physics can be found in the cited references. The devices can be generally used in classroom lecture demonstrations, outreach activities, or other student-based projects. However, pedagogical details are left to readers' discretion, depending on the scope …

Fabrication And Characterization Of Manganese Oxide Surfaces From Polymer-Based Fiber Precursors, Molly C. Brockway

Graduate Theses & Non-Theses

Supercapacitors are an energy storage technologycombining properties of both capacitors and batteries to deliver high power and energydensities. Supercapacitors store charge through electrostatic and faradaic interactions between the electrode and ionic electrolyte. By improving the physical structure of electrodes, the interfacial area where energy storage occurs can be increased and electrochemical performance improved. New, fibrous, manganese oxide web-based structures tested for use as a supercapacitor electrode were fabricated by electrospinning and direct calcinationof metal salt-containing polymer fibers, and the effects of fabrication parameters on electrochemical performance were investigated. Data show that high polymer concentrations and low oxide precursor concentrations during …

Replication Data For: Effect Of Subsurface Soil Moisture Variability And Atmospheric Conditions On Methane Gas Migration In Shallow Subsurface, C. T.K.K. Deepagoda, Kathleen Smits

Earth & Environmental Sciences Datasets - Archive

A major concern resulting from the increased use and production of natural gas has been how to mitigate fugitive greenhouse gas emissions (predominantly methane) from natural gas infrastructure (e.g., leaky shallow pipelines). Subsurface migration and atmospheric loading of methane from pipeline leakage is controlled by source configurations and subsurface soil conditions (e.g., soil heterogeneity and soil moisture) and are further affected by atmospheric conditions (e.g., wind and temperature). However, the transport and attenuation of methane under varying subsurface and atmospheric conditions are poorly understood, making it difficult to estimate leakage fluxes from methane concentration measurements at and above the soil …

Effects Of Air-Injection Pressure On Airflow Pattern Of Air Sparging, Arvin Farid, Atena Najafi, Jim Browning, Elisa Barney Smith

Civil Engineering Faculty Publications and Presentations

Air sparging is a remediation technology for treating soil/groundwater contaminated with volatile organic compounds (VOCs). VOC removal during air sparging is rendered less effective because of the random formation of air channels, creating preferential paths for airflow, thus limiting remediation to these channels, referred to as a zone of influence (ZOI). Pulsation is a popular method used to improve the effectiveness of air sparging through cyclic operation, with the hope that air channels would form elsewhere. Pulsation makes air sparging more time-consuming. This paper studies the effects of one cycle of pulsation and air pressure on the airflow pattern and …

Asphaltene Thermodynamic Flocculation During Immiscible Nitrogen Gas Injection, Mukhtar Elturki, Abdulmohsin Imqam

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Gas-enhanced oil recovery is one of the most advantageous enhanced oil recovery methods. Nitrogen is one of the most investigated gases because of its beneficial properties. However, during its interaction with crude oil, nitrogen can induce asphaltene deposition, which may result in severe formation damage and pore plugging. Few works have investigated the impact of nitrogen on asphaltene instability. This research studied the immiscibility conditions for nitrogen in nanopores and the impact of nitrogen on asphaltene precipitations, which could lead to plugging pores and oil recovery reduction. A slimtube was used to determine the minimum miscibility pressure (MMP) of nitrogen …

Political Processes Of Displacement In Infrastructure Development: The Case Of Aldeia Da Luz And The Alqueva Dam, Cordelia Walz

Independent Study Project (ISP) Collection

In 2002, the residents of Aldeia da Luz left their village for the final time, displaced to make room for the Alqueva Dam, a massive regional hydropower and irrigation project almost half a century in the making. The Alqueva Multipurpose Project was marketed by the Portuguese government as a way to develop the impoverished region of the Alentejo and bring innovation to the agricultural sector. The village of Luz was the only physical obstacle to this goal and, therefore, its residents were dispossessed, sacrificed for the development of the greater Alentejo region. However, unlike many other large-scale infrastructure projects that …

Taking The Waste Out Of Wastewater: Evaluation And Implementation Of Sustainability Measures At Base Aérea N.°5’S Wastewater Treatment Plant, Abigail Monahan

Independent Study Project (ISP) Collection

Wastewater treatment is a critical process by which the concentration of pollutants in wastewater are reduced to minimize the resulting effluent’s impact on human health and the environment. Base Aérea N.°5, an airbase located in Monte Real, Portugal, is striving to enhance their wastewater treatment methods to decrease the impact of the treated effluent on the environment. They can reduce the effluent’s impact by implementing more advanced wastewater treatment to decrease the concentration of micropollutants and pathogens in the effluent, and they can reuse the treated effluent to decrease the volume of freshwater they extract. This work seeks to evaluate …

Effect Of Addition Of Nano Silicon Dioxide To Cement Bricks: Preparation And Characterictics, Rehab Emad, Ibrahim M. Ibrahim, M. A. Radwan, M. A. Sadek, Hany A. Elazab

Chemical and Biochemical Engineering Faculty Research & Creative Works

The aim of the research is to design and produce a durable, and high load, bearing build constructing bricks based on cement, sand, and aggregates with the addition of Nano silica, studying the effect of the added materials to get a background about the impact of the Nano silica on the ability of using such a product. The cement used is 52.5 grade which represent the strength of the cement, sand with particle size 300-600 micrometer, aggregates with diameter lays between 0.5-1 cm better to use smaller size, water, and finally Nano-silica with particle size 17 nm with purity higher …

Self-Adhesive Silicone Microstructures For The Treatment Of Tympanic Membrane Perforations, Gabriela Moreira Lana, Katharina Sorg, Gentiana Ioana Wenzel, Dietmar Hecker, René Hensel, Bernhard Schick, Klaus Kruttwig, Eduard Arzt

Chemical and Biochemical Engineering Faculty Research & Creative Works

Inspired by the gecko foot, polymeric microstructures have demonstrated reliable dry adhesion to both stiff objects and sensitive surfaces such as skin. Microstructured silicone patches are proposed, herein, for the treatment of tympanic membrane perforations with the aim of serving as an alternative for current surgical procedures that require anesthesia and ear canal packing. Sylgard 184 PDMS micropillars of 20 μm in diameter and 60 μm in length are topped by a Soft Skin Adhesive (SSA) MG7-1010 terminal layer, of about 25 μm thickness. The adhesion is evaluated by specially designed tack tests against explanted murine eardrums and, for comparison, …

A Novel Laser-Aided Machining And Polishing Process For Additive Manufacturing Materials With Multiple Endmill Emulating Scan Patterns, Mohammad Masud Parvez, Sahil Patel, Sriram Praneeth Isanaka, Frank W. Liou

Mechanical and Aerospace Engineering Faculty Research & Creative Works

In additive manufacturing (AM), the surface roughness of the deposited parts remains significantly higher than the admissible range for most applications. Additionally, the surface topography of AM parts exhibits waviness profiles between tracks and layers. Therefore, post-processing is indispensable to improve surface quality. Laser-aided machining and polishing can be effective surface improvement processes that can be used due to their availability as the primary energy sources in many metal AM processes. While the initial roughness and waviness of the surface of most AM parts are very high, to achieve dimensional accuracy and minimize roughness, a high input energy density is …

Coupled Flexural‐Electrical Evaluation Of Additively Manufactured Multifunctional Composites At Ambient Temperature, Ritesh Ghimire, Frank W. Liou

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Multifunctional composites offer a higher strength to weight ratio, electrical properties, etc., thereby providing possible solutions for replacing the physical electrical wirings in aircraft. The lack of research on the coupled multifunctional characterization of 3D printed composites flexural-electrical properties is the main reason for its unsuitability in aerospace applications. The proposed method evaluates multifunctional flexural‐electrical properties of 3D printed multifunctional carbon fiber composites. Traditional methods for conducting structural and electrical analyses for aircraft certification do not accommodate new technologies that are not yet proven. Such technologies are additive manufacturing (AM) techniques, multifunctional composite structures, and the certification requirements for 3D …

Understanding The Plugging Performance Of Hpam-Cr (Iii) Polymer Gel For Co2 Conformance Control, Xindi Sun, Baojun Bai, Ali Khayoon Alhuraishawy, Daoyi Zhu

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

With the demand for conformance control in carbon dioxide (CO₂) flooding fields, hydrolyzed polyacrylamide-chromium [HPAM-Cr (III)] polymer gel has been applied in fields for CO₂ conformance control. However, the field application results are mixed with success and failure. This paper is intended to understand the HPAM-Cr (III) polymer gel plugging performance in CO₂ flooding reservoirs through laboratory experiments and numerical analysis. We conducted core flooding tests to understand how the cycles of CO₂ and water affect the HPAM-Cr (III) polymer gel plugging efficiency to CO₂ and water during a water-alternating-gas (WAG) process. Berea Sandstone …

Design Optimization Of A Very High Power Density Motor With A Reluctance Rotor And A Modular Stator Having Pms And Toroidal Windings, Peng Han, Murat G. Kesgin, Dan M. Ionel, Rohan Gosalia, Nakul Shah, Charles J. Flynn, Chandra Sekhar Goli, Somasundaram Essakiappan, Madhav Manjrekar

Power and Energy Institute of Kentucky Faculty Publications

This paper proposes a new high power density permanent magnet (PM) motor design for traction applications to achieve the 50kW/L target set by the US Department of Energy by increasing the torque capability and operating speed compared to conventional PM machine topologies. A large-scale multi-objective design optimization based on 2D finite element analysis (FEA) and differential evolution algorithm was conducted to achieve the best trade-off among high efficiency, high power density and high power factor. The torque-speed envelopes are also checked for the Pareto front designs to make sure they have a constant power speed ratio of at least 3:1. …