Engineering Commons^™

Rotary Furnace Lining To Reduce Thermal Stress, Zamira Mukhamedbaeva, Erkin Kurbanov, Abduvali Mukhamedbaev

CHEMISTRY AND CHEMICAL ENGINEERING

The aim of the study is to reduce the thermal stresses of the lining in the areas adjacent to the flare sintering zone of rotary kilns intended for the production of cement clinker. It is proposed to use a lining made of parallel rows of alternating chamotte and chromium-magnesite refractory products to reduce thermal stresses in the areas adjacent to the flare sintering zone by up to 20%, increase the service life of the lining by 1.1-1.2 times as a result of equalizing thermal stresses in the areas of the sintering zone. Optimization of the initial raw material mixture, in …

Computer Simulation Of Particle Velocity In A Cyclone, Askar Artikov, Botir Usmonov, Dilshod Karabaev, Anvar Ulmasbaev, Lola Akabirova

CHEMISTRY AND CHEMICAL ENGINEERING

The article sets the goal of determining and calculating the speed of accelerated movement of particles in the gas-dust flow of an air cyclone, depending on the size of the cyclone, the physical properties of the particle and the gas-dust flow. A method for constructing a computer model of the motion of a particle in a roaring gas-dust flow of a cyclone is presented. The sequence of formalization of the computer model of the process of sedimentation of particles of a gas-dust flow of a cyclone unit is based on the theoretical foundations of aerodynamics and touches on the most …

Anti-Corrosion Protection Of Metal Parts Of Transportation Equipment With A Polymer Coating Based On Epoxiurethane, Aida Barkhanadjyan, Ravshan Khakimov, Botir Ibragimov, Oybek Vafayev, Dmitriy Ayrapetov

CHEMISTRY AND CHEMICAL ENGINEERING

Automotive vehicles are constantly exposed to corrosion processes, and the durability of metal parts depends on the intensity of corrosion. The loss of metals from corrosion is 8-10% of the initial metal mass. In total, losses from corrosion are 4-6% of national income in many countries. This indicates the need for research and the importance of scientific and technical work in this area. This can be achieved by developing a technology for producing anticorrosive compounds and applying them as protective coatings. The anticorrosive protection of a coating synthesized on the basis of local raw materials - epoxyurethane with an additive …

Synthesis And Research Of Silicon-Containing Phthalocyanine, Dilmurod Shukurov, Hayit Turayev, Abdulakhat Djalilov, Masud Karimov

CHEMISTRY AND CHEMICAL ENGINEERING

The aim of this study is to synthesize, and study a new form of dye based on phthalocyanine, a silicon-containing phthalocyanine pigment used as a dye for dye-sensitive solar cells, which are currently third generation solar cells as one of the energy source alternatives. To achieve this goal, a silicon-containing phthalocyanine pigment containing urea, phthalic anhydride and sodium fluorosilicate was synthesized and studied. Based on the results of IR spectroscopy, the reaction of pigment formation is proposed and the data of scanning electron microscopy is presented. Its differential thermal analysis, photodynamic analysis and its relationship with inorganic and organic solvents …

Development Of The Composition Of A Composite Material Based On Thermoreactive Binder Ed-20, Umida Ziyamukhamedova, Gavhar Miradullayeva, Erkin Rakhmatov, Jasur Nafasov, Mavtuna Inogamova

CHEMISTRY AND CHEMICAL ENGINEERING

The aim of the study is to determine the effect of the type of structural modifier and filler on the structure formation and technological properties of potting composite polymeric materials (HCPM) and protective coatings for sheet and complex-configuration technological equipment, taking into account their rheological properties. Compositions of composite polymer materials based on a thermosetting binder of epoxy-diane resin ED-20 filled with a mineral filler - kaolin modified with gassipol resin (GS) - were developed using Newton's interpolation formula and the Lagrange method. The optimal amount of gossypol resin determined in the composition of the composite – in the amount …

Effect Of Talc On The Properties Of A Compound Based On Ethylene-Propylene Copolymer, Ikromjon Usmanov, Farrukh Kurbanbekov, Bobir Aykhodjaev, Ravshan Adilov

CHEMISTRY AND CHEMICAL ENGINEERING

The aim of the research is to study the possibility of replacing Korean-made talc with inexpensive talc from an Afghan deposit, processed in Uzbekistan and used for the production of polypropylene compounds. In the future, these compounds are used for the manufacture of plastic car parts. A block copolymer produced by Uz Kor Gaz Chemical was chosen as a binder. For this, the influence of the content and type of talc on the properties of a compound based on an ethylene-propylene copolymer was studied.

The properties of the obtained compounds checked using ISO standards. The fractional composition of the studied …

Influence Of Sulfur Modification On The Properties Of Sulfur Concrete, Zhavkhar Khayitova, Khasan Beknazarov, Hayit Turaev, Abdulakhat Jalilov

CHEMISTRY AND CHEMICAL ENGINEERING

The purpose of this study is the synthesis and study of modified sulfur concrete for use in industrial construction. To achieve this goal, sulfur concrete based on gossypol resin and pyrolysis distillate was modified and studied. The strength properties of sulfur-based concrete obtained from sulfur modified with gossypol resin and pyrolysis distillate were investigated. For the addition to sulfur concrete, industrial waste was used as a finely dispersed filler - fly ash from the Angren TPP and phosphogypsum generated at Ammophos-Maxam JSC. It was found that the best strength results correspond to sulfur-based concrete modified with gossypol resin using an …

Physical And Chemical Studies Of Overroof Rocks Of Clay Shales Of The Dzherdanak Deposit, Mastura Aripova, Ivan Levitskiy, Khabiba Khamidova, Odelbek Ammanov

CHEMISTRY AND CHEMICAL ENGINEERING

The purpose of this study is study of the physical and chemical properties of the overburden of the Dzherdanak deposit. The chemical and mineralogical composition of the overburden of the Djerdanak deposit has been studied by the methods of X-ray and thermography, electron microscopy and infrared spectroscopy. The main phases are quartz, kaolinite and muscovite. The study of the fine structure of the rock under an electron microscope showed the homogeneity of the rock with pronounced uniform inclusions, which is preserved even after firing. Changes in the rock after firing at 1050 °C have been determined. The formation of mullite …

On The Possibility Of Obtaining Effective Phosphoric Fertilizers As A Result Of Interaction Of Phosphorite-Containing Waste With Activated Glauconite Sands, Nargisa Takhirova, Fazlidin Khudoyberdiev, Shahlo Daminova

CHEMISTRY AND CHEMICAL ENGINEERING

These studies are devoted to the study of the chemical properties obtained as a result of chemical activation of glauconite and further neutralization of activated glauconite by waste products of phosphorite concentrates. Based on the results of X-ray structural studies of the obtained products, it is possible to obtain granular complex fertilizers after adding phosphorites to the system. Activation with mineral acids (nitric or sulfuric) should be carried out to accelerate the transformation of minerals from glauconite sands into an easily digestible form. Since the obtained compounds form an acidic environment, it is necessary to neutralize them. The neutralization process …

Study Of Sorption Of Rhenium Ions On Solid Extragents, Otabek Pardaev, Dildora Ilkhomjonkizi Khakimboeva, Shahlo Daminova, Ulugbek Sharafutdinov, Sharipov Khasan Turabovich

CHEMISTRY AND CHEMICAL ENGINEERING

In this work, the aim is to study the possibility of extracting rhenium from sulfuric acid solutions by sorption of impregnated sorbents based on polystyrene-divinylbenzene (MN202) and an organic reagent MAB (2-amino-1-methylbenzimidazole).New sorbent based on MN202 (Purolite) impregnated with organic reagents have been obtained and investigated. The sorbent characteristics determined using SEM, XRD and FTIR methods. The optimal conditions for the sorption of rhenium (VII) ions for the "element-sorbent" systems have been established. Under static conditions, the sorption of rhenium on impregnated sorbents in a sulfuric acid solution was studied in the periodic system with respect to the contact time, …

An Experimental Comparison Of Simple Measurements Used For The Characterization Of Sand Equestrian Surfaces, María Alejandra Blanco, Raúl Hourquebie, Kaleb Dempsey, Peter Schmitt, Michael L. Peterson

Biosystems and Agricultural Engineering Faculty Publications

Quantitative measurements of performance parameters have the potential to increase consistency and enhance performance of the surfaces as well as to contribute to the safety of horses and riders. This study investigates how factors known to influence the performance of the surface, incorporation of a drainage package, control of the moisture control, and introduction of a geotextile reinforcement, affect quantitative measurements of arena materials. The measurements are made by using affordable lightweight testing tools which are readily available or easily constructed. Sixteen boxes with arena materials at a consistent depth were tested with the Going Stick (GS), both penetration resistance …

Nusat I: History, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint Presentation created by Professor Bob Twiggs titled "NUSat I: History" from October 5, 2021.

College Of Engineering News, Georgia Southern University

College of Engineering & Computing: News & Publications (2010-2023)

• GS engineering student competes on Netflix baking show

Nusat I: History, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint Presentation created by Professor Bob Twiggs titled "NUSat I: History" from October 5, 2021.

College Of Engineering News, Georgia Southern University

College of Engineering & Computing: News & Publications (2010-2023)

• 2021-22 Undergraduate Research Awards Announced

Defining The Innate Immune Responses For Sars-Cov-2-Human Macrophage Interactions, Mai M. Abdelmoaty, Pravin Yeapuri, Jatin Machhi, Katherine E. Olson, Farah Shahjin, Vikas Kumar, You Zhou, Jingjing Liang, Kabita Pandey, Arpan Acharya, Siddappa N. Byrareddy, R. Lee Mosley, Howard E. Gendelman

Nebraska Center for Biotechnology: Faculty and Staff Publications

Host innate immune response follows severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) infection, and it is the driver of the acute respiratory distress syndrome (ARDS) amongst other inflammatory end-organ morbidities. Such life-threatening coronavirus disease 2019 (COVID-19) is heralded by virus-induced activation of mononuclear phagocytes (MPs; monocytes, macrophages, and dendritic cells). MPs play substantial roles in aberrant immune secretory activities affecting profound systemic inflammation and end-organ malfunctions. All follow the presence of persistent viral components and virions without evidence of viral replication. To elucidate SARS-CoV- 2-MP interactions we investigated transcriptomic and proteomic profiles of human monocyte-derived macrophages. While expression of the …

Optimal Tracking In Switched Systems With Free Final Time And Fixed Mode Sequence Using Approximate Dynamic Programming, Tohid Sardarmehni, Xingyong Song

Mechanical Engineering Faculty Publications

Optimal tracking in switched systems with fixed mode sequence and free final time is studied in this article. In the optimal control problem formulation, the switching times and the final time are treated as parameters. For solving the optimal control problem, approximate dynamic programming (ADP) is used. The ADP solution uses an inner loop to converge to the optimal policy at each time step. In order to decrease the computational burden of the solution, a new method is introduced, which uses evolving suboptimal policies (not the optimal policies), to learn the optimal solution. The effectiveness of the proposed solutions is …

Examining Thermal Management Strategies For A Microcombustion Power Device, Bhanuprakash Reddy Guggilla, Jack Perelman Camins, Benjamin Taylor, Smitesh Bakrania

Henry M. Rowan College of Engineering Departmental Research

Microcombustion attracts interest with its promise of energy dense power generation for electronics. Yet, challenges remain to develop this technology further. Thermal management of heat losses is a known hurdle. Simultaneously, non-uniformities in heat release within the reaction regions also affect the device performance. Therefore a combination of thermal management strategies are necessary for further performance enhancements. Here, a bench top platinum nanoparticle based microcombustion reactor, coupled with thermoelectric generators is used. Methanol-air mixtures achieve room temperature ignition within a catalytic cartridge. In the current study, the reactor design is modified to incorporate two traditional thermal management strategies. By limiting …

Near-Field Imaging Of Plasmonic Nanopatch Antennas With Integrated Semiconductor Quantum Dots, Vasudevan Iyer, Yoong Sheng Phang, Andrew Butler, Jiyang Chen, Brian Lerner, Christos Argyropoulos, Thang Hoang, Benjamin Lawrie

Department of Electrical and Computer Engineering: Faculty Publications

Plasmonic nanopatch antennas that incorporate dielectric gaps hundreds of picometers to several nanometers thick have drawn increasing attention over the past decade because they confine electromagnetic fields to grossly sub-diffraction-limited volumes. Substantial control over the optical properties of excitons and color centers confined within these plasmonic cavities has already been demonstrated with far-field optical spectroscopies, but near-field optical spectroscopies are essential for an improved understanding of the plasmon–emitter interaction at the nanoscale. Here, we characterize the intensity and phase-resolved plasmonic response of isolated nanopatch antennas by cathodoluminescence microscopy. Furthermore, we explore the distinction between optical and electron beam spectroscopies of …

On The Need To Determine Accurately The Impact Of Higher-Order Sensitivities On Model Sensitivity Analysis, Uncertainty Quantification And Best-Estimate Predictions, Dan Gabriel Cacuci

Faculty Publications

This work aims at underscoring the need for the accurate quantification of the sensitivities (i.e., functional derivatives) of the results (a.k.a. “responses”) produced by large-scale computational models with respect to the models’ parameters, which are seldom known perfectly in practice. The large impact that can arise from sensitivities of order higher than first has been highlighted by the results of a third-order sensitivity and uncertainty analysis of an OECD/NEA reactor physics benchmark, which will be briefly reviewed in this work to underscore that neglecting the higher-order sensitivities causes substantial errors in predicting the expectation and variance of model responses. The …

Association Between Aqueous Atrazine And Pediatric Cancer In Nebraska, Jagadeesh Puvvula, Shannon L. Bartelt-Hunt, Balkiss S. Ouattara, Alan S. Kolok, Jesse E. Bell, Eleanor G. Rogan

Department of Civil and Environmental Engineering: Faculty Publications

Agrichemicals, chemicals used to maximize crop and animal production, can lead to water quality concerns when these chemicals run off into surface and groundwater after precipitation events. In Nebraska, one such chemical is atrazine, a suspected carcinogen. This study evaluated the association between atrazine in surface and groundwater, in relation to the incidence of pediatric cancer in Nebraska watersheds over 30 years (1 January 1987 to 31 December 2016). The watersheds were grouped into four categories based on the average atrazine concentration over the study period, using quantile classification. The associations between atrazine (ground/surface) and pediatric cancer after adjusting for …

Effects Of A Hole On Uplifting Forces On A Submerged Horizontal Thin Plate, Deng How Tsaur, Shyh Rong Her

Journal of Marine Science and Technology–Taiwan

The effect of a hole on uplifting forces acting on a submerged horizontal thin plate are examined using the boundary element method. To deal with the submerged thin plate case, which is a degenerate boundary problem, a hypersingular integral equation is employed to overcome some troubles when the boundary element method is used. Two-dimensional problems are considered, and the linear gravity wave theory is adopted. Several examples are calculated and the numerical results are presented to show the influence of a hole on uplifting forces.

Engineering News, Fall 2021, School Of Engineering

Engineering News

No abstract provided.

3d-Printable And Open-Source Modular Smartphone Visible Spectrophotometer, Brandon Winters, Nick Banfield, Cassandra Dixon, Anna Swensen, Dakota Holman, Braxton Fillbrown

Chemistry Faculty Publications

The past four decades have brought significant and increasingly rapid changes to the world of instrument design, fabrication, and availability due to the emergence of 3D printing, open-source code and equipment, and low-cost electronics. These, along with other technological advances represent a nexus in time ripe for the wide-spread production and availability of low-cost sophisticated scientific equipment. To that end, the design of a 3D printable and open-source, modular spectrometer is described. This specific instrument is distinctly different from others that have been reported in recent years in that it was designed outside of the “black box” paradigm of …

Rapid Selection Of Moving Wagons In The Sequence Of Video Frames Based On The Method Of Calculating The Optical Flow, Bahodir Muminov Prof.

Bulletin of TUIT: Management and Communication Technologies

With the advent of digital video cameras, it has become possible to process measurement data using a computer, which has led to a wide range of new tasks in digital signal processing. Examples of such tasks are perimeter observation and detection of a moving object, recognition of a moving object, and identification of an object. Research and development of algorithms for processing video data, as a rule, requires a time-consuming computational experiment on model and real data of a large volume. Therefore, it is important to correctly organize the computational process when modifying and testing algorithms.

Greenhouse Gas Emissions And Drought Projections For Nebraska, Adam Liska

Adam Liska Papers

This lecture will focus on three issues. The first is a presentation of data from the first greenhouse gas emissions inventory for the State of Nebraska, which will be published in the coming weeks. In 2016, emissions from beef cattle made up 23% of net state emissions, and coal for electricity made up 23.7% of net state emissions. The second issue to be addressed are the impacts of the 2012 drought on agriculture in Nebraska and the region. The drought of 2012 indicates that future droughts in the 21^st century in the region can be a dominant influence on …

Engineering At San Jose State University, Fall 2021, San Jose State University, Charles W. Davidson College Of Engineering

Engineering at San Jose State University

No abstract provided.

Santa Clara Magazine, Volume 62 Number 2, Fall 2021, Santa Clara University

Santa Clara Magazine

18 - WE ARE THE CHAMPIONS The pandemic stole an entire year of games from them. But this team still won it all. Written by Harold Gutmann. Illustrated by Liam Eisenberg.

26 - INFORMED BY STRUGGLE. How hardship forged a sense of gratitude in SCU finance professor Meir Statman and his wife, Navah. Written by Deborah Lohse.

30 - TWEETING GOOD There’s a Bronco who finds hope, God, and cat pictures online. We talk with @padreSJ. Interviewed by Leslie Griffy. Illustrated by Kyle Hilton.

34 - SIGNALS FROM A CHANGING PLANET. The imprints of humans on the environment spell a …

An Application Of An Unequal-Area Facilities Layout Problem With Fixed-Shape Facilities, Alan Mckendall, Artak Hakobyan

Faculty & Staff Scholarship

The unequal-area facility layout problem (UA-FLP) is the problem of locating rectangular facilities on a rectangular floor space such that facilities do not overlap while optimizing some objective. The objective considered in this paper is minimizing the total distance materials travel between facilities. The UA-FLP considered in this paper considers facilities with fixed dimension and was motivated by the investigation of layout options for a production area at the Toyota Motor Manufacturing West Virginia (TMMWV) plant in Buffalo, WV, USA. This paper presents a mathematical model and a genetic algorithm for locating facilities on a continuous plant floor. More specifically, …

Thin Safety Margin: The Sefor Super-Prompt-Critical Transient Experiments, Ozark Mountains, Arkansas 1970–1971, Jerry Havens, Collis Geren

Arkansas Scholarly Editions

Thin Safety Margin charts the history of SEFOR, a twenty-megawatt reactor that operated for three years in the rural Ozark Mountains of Arkansas as part of an internationally sponsored program designed to demonstrate the Doppler effect in plutonium-oxide-fueled fast reactors. Authors Jerry Havens and Collis Geren draw upon this history to assess the accidental explosion risk inherent in using fast reactors to reduce the energy industry’s carbon dioxide emissions.

If a sufficiently powerful fast-neutron explosion were to cause the containment of a reactor such as SEFOR’s to fail, the reactor’s radiotoxic plutonium fuel could vaporize and escape into the surrounding …