Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

2021

Discipline
Institution
Keyword
Publication
Publication Type
File Type

Articles 1141 - 1170 of 9978

Full-Text Articles in Engineering

Numerical Investigation Of The Impact Of Distortion On The Hydrodynamics In The Lower Mississippi River Physical Model (Lmrpm), Ali Heidarizhaleh Nov 2021

Numerical Investigation Of The Impact Of Distortion On The Hydrodynamics In The Lower Mississippi River Physical Model (Lmrpm), Ali Heidarizhaleh

LSU Doctoral Dissertations

The Lower Mississippi River Physical Model (LMRPM) is a distorted-scale, 1:6000 horizontal and 1:400 vertical, movable-bed model that is being used to complement ongoing numerical and field studies directed at studying how non-cohesive sediment transport will be impacted by future changes in relative sea level rise and river discharges, as well various management strategies, such as river sediment diversions, in the lower ~190 miles of the Mississippi River The LMRPM was designed using Froude number (Fr) similarity between the prototype and the model, while the flow Reynolds number is relaxed, but determined to be high enough to ensure rough turbulent …

Go to article

Copper Electrodeposition Assisted By Hydrogen Evolution For Wearable Electronics: Interconnections And Fiber Metallization, Sabrina M. Rosa Ortiz Nov 2021

Copper Electrodeposition Assisted By Hydrogen Evolution For Wearable Electronics: Interconnections And Fiber Metallization, Sabrina M. Rosa Ortiz

USF Tampa Graduate Theses and Dissertations

The current project focused on studying an innovative and novel method, called hydrogen evolution assisted (HEA) electroplating, for rapid and localized electrochemical copper deposition that can be applied for integration of electronic circuits to printed circuit boards (PCBs) and fabrics for developing smart textile (e-textile) and advanced wearable electronics. This method has shown a great enhancement to the deposition rate of copper compared to the conventional galvanostatic electroplating method, opening new venues for patterning conductive circuit layouts on fabrics and for the direct integration of devices into fabrics. While due to the slow growth rate and low mechanical flexibility of …

Go to article

Estimating Bounds Of Aerodynamic, Mass And Auxiliary Load Impacts On Autonomous Vehicles: A Powertrain Simulation Approach, Yuche Chen, Ruixiao Sun, Xuanke Wu Nov 2021

Estimating Bounds Of Aerodynamic, Mass And Auxiliary Load Impacts On Autonomous Vehicles: A Powertrain Simulation Approach, Yuche Chen, Ruixiao Sun, Xuanke Wu

Faculty Publications

Vehicle automation requires new onboard sensors, communication equipment, and/or data processing units, and may encourage modifications to existing onboard components (such as the steering wheel). These changes impact the vehicle’s mass, auxiliary load, coefficient of drag, and frontal area, which then change vehicle performance. This paper uses the powertrain simulation model FASTSim to quantify the impact of autonomy-related design changes on a vehicle’s fuel consumption. Levels 0, 2, and 5 autonomous vehicles are modeled for two battery-electric vehicles (2017 Chevrolet Bolt and 2017 Nissan Leaf) and a gasoline powered vehicle (2017 Toyota Corolla). Additionally, a level 5 vehicle is divided …

Go to article

Estimating Bounds Of Aerodynamic, Mass, And Auxiliary Load Impacts On Autonomous Vehicles: A Powertrain Simulation Approach, Yuche Chen, Ruixiao Sun, Xuanke Wu Nov 2021

Estimating Bounds Of Aerodynamic, Mass, And Auxiliary Load Impacts On Autonomous Vehicles: A Powertrain Simulation Approach, Yuche Chen, Ruixiao Sun, Xuanke Wu

Faculty Publications

Vehicle automation requires new onboard sensors, communication equipment, and/or data processing units, and may encourage modifications to existing onboard components (such as the steering wheel). These changes impact the vehicle’s mass, auxiliary load, coefficient of drag, and frontal area, which then change vehicle performance. This paper uses the powertrain simulation model FASTSim to quantify the impact of autonomy-related design changes on a vehicle’s fuel consumption. Levels 0, 2, and 5 autonomous vehicles are modeled for two battery-electric vehicles (2017 Chevrolet Bolt and 2017 Nissan Leaf) and a gasoline powered vehicle (2017 Toyota Corolla). Additionally, a level 5 vehicle is divided …

Go to article

Explorations And Developments In Multifunctionality, 3d Printing, And Accelerated Aging For Thermoplastics And Thermosets, Zachary Brounstein Nov 2021

Explorations And Developments In Multifunctionality, 3d Printing, And Accelerated Aging For Thermoplastics And Thermosets, Zachary Brounstein

Nanoscience and Microsystems ETDs

If the world is to progress through the fourth industrial revolution, rapid advances in materials science must complement new technological feats in manufacturing, computation and device functionality, and a broader understanding of how materials behave as they age and degrade. To this effect, much effort has been directed towards polymeric materials to address and solve many problems in this new era. This includes developing polymer composites that incorporate fillers to imbue multifunctionality, fabricating novel formulations for additive manufacturing, and conducting aging studies to assess the performance of these materials over long time spans. Building and expanding on the latest research …

Go to article

The Photophysical Studies Of Transition Metal Polyimines Encapsulated In Metal Organic Frameworks (Mof’S), Jacob M. Mayers Nov 2021

The Photophysical Studies Of Transition Metal Polyimines Encapsulated In Metal Organic Frameworks (Mof’S), Jacob M. Mayers

USF Tampa Graduate Theses and Dissertations

Light harvesting systems provide a platform that converts solar energy into other forms of energy. One of the most common examples of photon capturing and conversion into chemical energy is observed in photosynthetic organisms in both Eurkaroyic and Prokaryotic domains. Nature provides a model for successful light harvesting platforms which includes the compartmentalization of antenna complexes that contain separated donor and acceptor pairs that participate in efficient electron transfer processes. In order to mimic such systems, crystalline porous materials that exhibits regular cavities and pore dimensions provides an excellent starting place. Metal organic frameworks (MOFs) are a class of porous …

Go to article

Crystal Structure Prediction Of Materials At Extreme Conditions, Ashley S. Williams Nov 2021

Crystal Structure Prediction Of Materials At Extreme Conditions, Ashley S. Williams

USF Tampa Graduate Theses and Dissertations

The prediction of the structure of a crystal given only the constituent elements is one of the greatest challenges in both materials science and computational science alike. If one were to try to predict a novel crystal by brute force, meaning by arranging the atoms in every possible position of the unit cell and optimizing the geometry to find the energy minima of the potential energy surface, the amount of computer resources required to complete the calculation on the timescale of a few years would vastly exceed the currently installed computational capacity of the entire world. Fortunately, several methods have …

Go to article

Pressure Retarded Osmosis: A Potential Technology For Seawater Desalination Energy Recovery And Concentrate Management, Joshua Benjamin Nov 2021

Pressure Retarded Osmosis: A Potential Technology For Seawater Desalination Energy Recovery And Concentrate Management, Joshua Benjamin

USF Tampa Graduate Theses and Dissertations

Currently, a significant challenge with reverse osmosis-based desalination is reducing the energy consumption and environmental impacts of the process. This project analyzed the viability of using pressure-retarded osmosis (PRO) for energy recovery in seawater desalination facilities using brine concentrate (the draw solution) and other water sources (the feed solution) such as wastewater effluent. The primary goal of this project is to decrease the cost and overall energy consumption of seawater desalination through PRO-based energy recovery. Process modeling, statistical and sensitivity analysis, energy and cost analysis, geospatial and GIS analysis, laboratory-scale testing, water quality analysis, SEM-EDS microscopy, computational fluid dynamics (CFD), …

Go to article

Shortcut Nitrogen Removal In Photo-Sequencing Batch Reactor, Experiments, Dynamic Model And Full-Scale Design, Sahand Iman Shayan Nov 2021

Shortcut Nitrogen Removal In Photo-Sequencing Batch Reactor, Experiments, Dynamic Model And Full-Scale Design, Sahand Iman Shayan

USF Tampa Graduate Theses and Dissertations

Nitrogen is one of the essential elements for life; however, inefficient use of nitrogen creates major environmental problems. Nitrogen-rich streams from urban areas, farms, and wastewater treatment plants (WWTPs) lead to surface and groundwater contamination, resulting in eutrophication, hypoxia, and notable environmental, public health and economic damage. Ammonia is a form of nitrogen that can be created during industrial or biological nitrogen fixation or decomposition of biomass. Anaerobic digesters (ADs) in WWTP generate biogas from collected sludge from primary and secondary clarifiers to achieve energy recovery in the plant. However, sidestream effluent from dewatering AD sludge contains high concentrations of …

Go to article

Application Of Gas-Assisted Gravity Drainage (Gagd) Process For Enhancing Recovery From Unconventional Resources, Muzher Al Musabeh Nov 2021

Application Of Gas-Assisted Gravity Drainage (Gagd) Process For Enhancing Recovery From Unconventional Resources, Muzher Al Musabeh

LSU Doctoral Dissertations

The oil recovery with hydraulic fracturing has played an important role in hydrocarbon production and energy support last decade from unconventional resources. Characteristically, the significant production decline and low recovery factors from these reservoirs triggered the need for new EOR techniques to compensate for the decline and help sustain the production. In this study, an experimental investigation of the Gas-Assisted Gravity Drainage (GAGD) process in the presence of fractures as EOR process was conducted using Nitrogen (N2) and Carbon Dioxide (CO2) in Berea Sandstone (BSS) and Tuscaloosa Marine Shale (TMS). Core flooding and EOR experiments were used to determine the …

Go to article

Modeling And Simulation Of Janus-Like Nanoparticles Formation By Solid-Gas Exothermic Reactions, A. A. Markov, Karen S. Martirosyan Nov 2021

Modeling And Simulation Of Janus-Like Nanoparticles Formation By Solid-Gas Exothermic Reactions, A. A. Markov, Karen S. Martirosyan

Physics & Astronomy Faculty Publications

Theoretical model for the simulation of synthesis of Janus-like particles (JP) consisting two different phases using the Carbon Combustion Synthesis of Oxides (CCSO) is presented. The model includes the variation of sample initial porosity, carbon concentration and oxygen flow rate used to predict the formation of JP features. The two temperature (2T) combustion model of chemically active submicron-dispersed mixture of two phases including ferroelectric and ferromagnetic was implemented and assessed by using the experimentally estimated activation energy of 112±3.3 kJ/mol and combustion temperature. The experimental values allowed to account the thermal and concentration expansion effect along with the dispersion by …

Go to article

Parametric Analysis Of Rib Pillar Stability In A Longitudinal Sublevel Open Stoping Operation In An Underground Copper Mine In Southern Africa, Kostas Kaklis, Zacharias Agioutantis, Munyindei Masialeti, Jerome Yendaw, Thierry Bineli Betsi Nov 2021

Parametric Analysis Of Rib Pillar Stability In A Longitudinal Sublevel Open Stoping Operation In An Underground Copper Mine In Southern Africa, Kostas Kaklis, Zacharias Agioutantis, Munyindei Masialeti, Jerome Yendaw, Thierry Bineli Betsi

Mining Engineering Faculty Publications

The pillar stability factor (PSF) is calculated in three different mining stages for a sublevel open stoping mining project located in northern Botswana. Several three-dimensional finite element models were developed by varying the stope span. Pillar strength was estimated using the Lunder and Pakalnis equation and pillar stress was obtained from the numerical models. As mining progresses, both the first and second mining stages meet the rib pillar stability factor requirement for safe extraction. Geometrical improvements are suggested in the mining layout for the third mining stage to achieve the required PSF, which is based on international practices.

Go to article

Nanocrystals Impregnated Porous Article And Method Of Making And Using Same, Michael D. Sherburne Nov 2021

Nanocrystals Impregnated Porous Article And Method Of Making And Using Same, Michael D. Sherburne

AFIT Patents

The present invention relates to devices for detecting radiation by the excitation of colloidal nanocrystals within a porous article and methods of using same. The aforementioned device is inexpensive and can be fabricated quickly in order to detect radiation. Due to the use of colloidal nanocrystals which have been known to have a decay constant of under 100 ps when energetic electrons produced by an incident x-ray excite the nanocrystals, this device can be used in fast radiation detection of x-rays.

Go to article

Aerobic Copper-Promoted Oxidative Dehydrosulfurative Carbon-Oxygen Cross-Coupling Of 3,4-Dihydropyrimidine-1: H -2-Thiones With Alcohols, Jihong Lee, Yujeong Kwon, Dong-Chan Lee, Jeong Hun Sohn Nov 2021

Aerobic Copper-Promoted Oxidative Dehydrosulfurative Carbon-Oxygen Cross-Coupling Of 3,4-Dihydropyrimidine-1: H -2-Thiones With Alcohols, Jihong Lee, Yujeong Kwon, Dong-Chan Lee, Jeong Hun Sohn

Chemistry and Biochemistry Faculty Research

An aerobic Cu-promoted oxidative dehydrosulfurative carbon-oxygen cross-coupling of 3,4-dihydropyrimidin-1H-2-thiones (DHPMs) with both aliphatic and aromatic alcohols is described. Together with the ready availability of DHPMs and both alcohols, the method furnishes facile access to biologically valuable 2-alkoxypyrimidines with rapid diversification.

Go to article

Ionospheric F-Layer Dipole Flute Instability Effects On Electromagnetic Scattering In A Magnetohydrodynamic Plasma, Andrew J. Knisely Nov 2021

Ionospheric F-Layer Dipole Flute Instability Effects On Electromagnetic Scattering In A Magnetohydrodynamic Plasma, Andrew J. Knisely

Theses and Dissertations

The ionosphere has significant impact on radio frequency (RF) applications such as satellites, over-the-horizon radar, and commercial communication systems. The dynamic processes effecting the behavior of the ionic content leads to a variety of instabilities that adversely affect the quality of RF signals. In the F-layer ionosphere, flute instability persists, appearing as two radial regions of high and low density perturbations elongated along the earth's geomagnetic field lines. The sizes of flute structures are comparable to the wavelengths in the high frequency spectrum. The objective is to characterize the high frequency scattering of an incident field by developing a 3D …

Go to article

Improvised Centrifugal Spinning For The Production Of Polystyrene Microfibers From Waste Expanded Polystyrene Foam And Its Potential Application For Oil Adsorption, Marco Laurence M. Budlayan, Jonathan N. Patricio, Jeanne Phyre B. Lagare, Susan D. Arco, Arnold C. Alguno, Antonio M. Basilio, Felmer S. Latayada, Rey Y. Capangpangan Nov 2021

Improvised Centrifugal Spinning For The Production Of Polystyrene Microfibers From Waste Expanded Polystyrene Foam And Its Potential Application For Oil Adsorption, Marco Laurence M. Budlayan, Jonathan N. Patricio, Jeanne Phyre B. Lagare, Susan D. Arco, Arnold C. Alguno, Antonio M. Basilio, Felmer S. Latayada, Rey Y. Capangpangan

Physics Faculty Publications

A straightforward approach to recycle waste expanded polystyrene (EPS) foam to produce polystyrene (PS) microfibers using the improvised centrifugal spinning technique is demonstrated in this work. A typical benchtop centrifuge was improvised and used as a centrifugal spinning device. The obtained PS microfibers were characterized for their potential application for oil adsorption. Fourier transform infrared spectroscopy results revealed similarity on the transmission bands of EPS foam and PS microfibers suggesting the preservation of the EPS foam’s chemical composition after the centrifugal spinning process. Scanning electron microscopy displayed well-defined fibers with an average diameter of 3.14 ± 0.59 μm. At the …

Go to article

A System Architecture For Water Distribution Networks, Noha Abdel-Mottaleb Nov 2021

A System Architecture For Water Distribution Networks, Noha Abdel-Mottaleb

USF Tampa Graduate Theses and Dissertations

This dissertation examines structure-function relationships of water distribution networks (WDNs), with focus on improving the decision-making process for water utilities. WDNs are lifeline infrastructure systems, necessary for the functioning of cities. Yet water utilities around the world struggle with emerging challenges that include but are not limited to aging infrastructure components, limited budgets, increased interdependencies between infrastructure systems, increased rates of urbanization, and increasing extreme weather conditions. This is why enhancing the performance of WDNs is a priority for water utilities around the world. This research begins to delineate a system architecture for WDNs and evaluates the use of various …

Go to article

Determinant Factors Of Bicyclist Injury Severity At Signalized And Unsignalized Intersections, Apy Das Nov 2021

Determinant Factors Of Bicyclist Injury Severity At Signalized And Unsignalized Intersections, Apy Das

Dissertations and Theses

Bicycling is becoming increasingly popular in Oregon and the US in general due to its environment friendliness as well as health benefits. With Oregon's population projected to increase by more than 30% over the next 30 years, improving the safety of the transportation network for persons on bicycles is important. In Oregon, majority of the bicyclist crashes occur at intersections. This thesis seeks to identify the determinant factors that significantly impact bicyclist crash injury severity at intersections. A mixed logit framework that accounts for any unobserved heterogeneity in the data and allows the estimated parameters to randomly vary across observations …

Go to article

Cessation And Resumption Of Elective Neurointerventional Procedures During The Coronavirus Disease 2019 Pandemic And Future Pandemics, Tim W. Malisch, Sameer A. Ansari, Gary R. Duckwiler, Kyle M. Fargen, Steven W. Hetts, Franklin A. Marden, Athos Patsalides, Clemens M. Schirmer, Allan Brook, Justin F. Fraser Nov 2021

Cessation And Resumption Of Elective Neurointerventional Procedures During The Coronavirus Disease 2019 Pandemic And Future Pandemics, Tim W. Malisch, Sameer A. Ansari, Gary R. Duckwiler, Kyle M. Fargen, Steven W. Hetts, Franklin A. Marden, Athos Patsalides, Clemens M. Schirmer, Allan Brook, Justin F. Fraser

Neurosurgery Faculty Publications

At the time of this writing, the coronavirus disease 2019 pandemic continues to be a global threat, disrupting usual processes, and protocols for delivering health care around the globe. There have been significant regional and national differences in the scope and timing of these disruptions. Many hospitals were forced to temporarily halt elective neurointerventional procedures with the first wave of the pandemic in the spring of 2020, in order to prioritize allocation of resources for acutely ill patients and also to minimize coronavirus disease 2019 transmission risks to non-acute patients, their families, and health care workers. This temporary moratorium on …

Go to article

Don't Bite The Bait: Phishing Attack For Internet Banking (E-Banking), Ilker Kara Nov 2021

Don't Bite The Bait: Phishing Attack For Internet Banking (E-Banking), Ilker Kara

Journal of Digital Forensics, Security and Law

Phishing attacks are based on obtaining desired information from users quickly and easily with the help of misdirecting, panicking, curiosity, or excitement. Most of the phishing web sites are designed on internet banking(e-banking) and the attackers can acquire financial information of misled users with the tactics and discourses they develop. Despite the increase of prevention techniques against phishing attacks day by day, an effective solution could not be found for this issue due to the human factor. Because of this reason, real phishing attack studies are essential to study and analyze the attackers’ attack techniques and strategies. This study focused …

Go to article

Driver Perceptions On Taxi-Sharing And Dynamic Pricing In Taxi Services: Evidence From Athens, Greece., Christina Milioti, Konstantinos Kepaptsoglou, Konstantinos Kouretas, Eleni Vlahogianni Nov 2021

Driver Perceptions On Taxi-Sharing And Dynamic Pricing In Taxi Services: Evidence From Athens, Greece., Christina Milioti, Konstantinos Kepaptsoglou, Konstantinos Kouretas, Eleni Vlahogianni

Journal of Public Transportation

The taxi industry has changed dramatically during the last decade, as ride-sourcing applications, ride-sharing and alternative pricing schemes have emerged, either as complementing or competitive services and strategies. After some years of familiarity with such trends, it is interesting to explore where the taxi industry stands with respect to possible service innovations. This paper explores behavioral patterns of drivers, focusing on issues such as their preferred way of conducting business, and their views on introducing taxi-sharing and dynamic pricing. Data collected from a face-to-face questionnaire survey in Athens, Greece are exploited, and appropriate econometric models are developed for the purposes …

Go to article

An Efficient Track-Scale Model For Laser Powder Bed Fusion Additive Manufacturing: Part 1- Thermal Model, Reza Tangestani, Trevor Sabiston, Apratim Chsktsborty, Waqas Muhammad, Lang Yuan, Étienne Martin Nov 2021

An Efficient Track-Scale Model For Laser Powder Bed Fusion Additive Manufacturing: Part 1- Thermal Model, Reza Tangestani, Trevor Sabiston, Apratim Chsktsborty, Waqas Muhammad, Lang Yuan, Étienne Martin

Faculty Publications

This is the first of two manuscripts that presents a computationally efficient full field deterministic model for laser powder bed fusion (LPBF). A new Hybrid Line (HL) heat input model integrates an exponentially decaying (ED) heat input over a portion of a laser path to significantly reduce the computational time. Experimentally measured properties of the high gamma prime nickel-based superalloy RENÉ 65 are implemented in the model to predict the in-process temperature distribution, stresses, and distortions. The model accounts for specific properties of the material as different phases. The first manuscript presents the HL heat transfer model, which is compared …

Go to article

Learning State-Dependent Sensor Measurement Models To Improve Robot Localization Accuracy, Troi André Williams Nov 2021

Learning State-Dependent Sensor Measurement Models To Improve Robot Localization Accuracy, Troi André Williams

USF Tampa Graduate Theses and Dissertations

This dissertation proposes a novel method called state-dependent sensor measurement models (SDSMMs). Such models dynamically predict the state-dependent bias and uncertainty of sensor measurements, ultimately improving fundamental robot tasks such as localization. In our first investigation, we introduced the state-dependent sensor measurement model framework, described their properties, stated the input and output of these models, and described how to train them. We also explained how to integrate such models with an Extended Kalman Filter and a Particle Filter, two popular robot state estimation algorithms. We validated the proposed framework through a series of localization tasks. The results showed that our …

Go to article

Moisture Affinity Of Hdpe/Phase-Change Material Composites For Thermal Energy Storage Applications, Sandra K. Boetcher, Thomas B. Freeman, Rafael M. Rodriguez, Kashif Nawaz Nov 2021

Moisture Affinity Of Hdpe/Phase-Change Material Composites For Thermal Energy Storage Applications, Sandra K. Boetcher, Thomas B. Freeman, Rafael M. Rodriguez, Kashif Nawaz

Publications

Moisture adsorption can degrade the structural integrity of thermal energy storage devices and can negatively impact the capacity and charging/discharging behavior. Steady-state and transient experiments are conducted at various operating temperatures to evaluate the moisture affinity of organic phase-change material (PCM) shape stabilized with high-density polyethylene (HDPE).

Go to article

Metal Fatigue And Crack Propagation Using Thermodynamic/Thermoelectric Approach, Behnam Hajshirmohammadi Nov 2021

Metal Fatigue And Crack Propagation Using Thermodynamic/Thermoelectric Approach, Behnam Hajshirmohammadi

LSU Doctoral Dissertations

The present dissertation concentrates on the fatigue life of metals and fatigue crack growth (FCG). The basic concept of fatigue thermodynamics is used for this purpose. With the application of thermoelectricity, a method is developed on the basis of fracture fatigue entropy (FFE) for the rapid estimation of the fatigue life of components. To this end, thermoelectric signals captured from a specimen during cyclic loading are analyzed, and a procedure is proposed for the calculation of fatigue life based on the thermoelectric signals in the beginning and the steady-state zone of fatigue. Temperature gradient and electric potential gradients in metals …

Go to article

Effectiveness Assessment Of The Search-Based Statistical Structural Testing, Yang Shi, Xiaoyu Song, Marek A. Perkowski, Fu Li Nov 2021

Effectiveness Assessment Of The Search-Based Statistical Structural Testing, Yang Shi, Xiaoyu Song, Marek A. Perkowski, Fu Li

Electrical and Computer Engineering Faculty Publications and Presentations

Search-based statistical structural testing (SBSST) is a promising technique that uses automated search to construct input distributions for statistical structural testing. It has been proved that a simple search algorithm, for example, the hill-climber is able to optimize an input distribution. However, due to the noisy fitness estimation of the minimum triggering probability among all cover elements (Tri-Low-Bound), the existing approach does not show a satisfactory efficiency. Constructing input distributions to satisfy the Tri-Low-Bound criterion requires an extensive computation time. Tri-Low-Bound is considered a strong criterion, and it is demonstrated to sustain a high fault-detecting ability. This article tries to …

Go to article

Novel Quantum Algorithms To Minimize Switching Functions Based On Graph Partitions, Peng Gao, Marek A. Perkowski, Yiwei Li, Xiaoyu Song Nov 2021

Novel Quantum Algorithms To Minimize Switching Functions Based On Graph Partitions, Peng Gao, Marek A. Perkowski, Yiwei Li, Xiaoyu Song

Electrical and Computer Engineering Faculty Publications and Presentations

After Google reported its realization of quantum supremacy, Solving the classical problems with quantum computing is becoming a valuable research topic. Switching function minimization is an important problem in Electronic Design Automation (EDA) and logic synthesis, most of the solutions are based on heuristic algorithms with a classical computer, it is a good practice to solve this problem with a quantum processer. In this paper, we introduce a new hybrid classic quantum algorithm using Grover’s algorithm and symmetric functions to minimize small Disjoint Sum of Product (DSOP) and Sum of Product (SOP) for Boolean switching functions. Our method is based …

Go to article

Optically Active Selenium Vacancies In Baga4Se7 Crystals, Brian C. Holloway, Timothy D. Gustafson, Christopher A. Lenyk, Nancy C. Giles, Kevin T. Zawilski, Peter G. Schunemann, Kent L. Averett, Larry E. Halliburton Nov 2021

Optically Active Selenium Vacancies In Baga4Se7 Crystals, Brian C. Holloway, Timothy D. Gustafson, Christopher A. Lenyk, Nancy C. Giles, Kevin T. Zawilski, Peter G. Schunemann, Kent L. Averett, Larry E. Halliburton

Faculty Publications

Barium gallium selenide (BaGa4Se7) is a recently developed nonlinear optical material with a transmission window extending from 470 nm to 17 μm. A primary application of these crystals is the production of tunable mid-infrared laser beams via optical parametric oscillation. Unintentional point defects, such as selenium vacancies, cation vacancies (barium and/or gallium), and trace amounts of transition-metal ions, are present in BaGa4Se7 crystals and may adversely affect device performance. Electron paramagnetic resonance (EPR) and optical absorption are used to identify and characterize these defects. Five distinct EPR spectra, each representing an electron …

Go to article

An Assessment And Exploration Of Recent Methodological Advances In Safety Data Analysis, Suryaprasanna Kumar Balusu Nov 2021

An Assessment And Exploration Of Recent Methodological Advances In Safety Data Analysis, Suryaprasanna Kumar Balusu

USF Tampa Graduate Theses and Dissertations

The injury severity and frequency of traffic crashes can be further reduced by implementing appropriate traffic safety measures. Several advanced methodologies have been developed in the recent decades to more accurately identify the factors affecting road safety. Such methodologies have helped policy makers formulate appropriate safety measures directed toward increasing seatbelt and helmet use, reducing speed limits in school zones, implementing adolescent driver programs, and so on. However, each methodological approach has its own strengths and weakness and could lead to different inferences. This dissertation assesses and explores a number of recently developed methodologies and their application to traffic safety …

Go to article

Fabrication Of Oxide-Based Memristors For Neural Networks, Jamison E. Wagner Nov 2021

Fabrication Of Oxide-Based Memristors For Neural Networks, Jamison E. Wagner

Electrical and Computer Engineering ETDs

This thesis discusses what a memristor is, how it is hypothesized to work and the fabrication work undertaken with hafnia and titania-based ultrathin oxide films. In addition, the electrical tests utilized to characterize the physical performance of the memristors including but not limited to, their IV hysteresis responses, yield rates and overall reliability. The results and discussion of this work are aimed at better understanding how fabrication of memristive devices can be further improved for future work.

Go to article

First Prev Next Last