Engineering Commons^™

Guardian Condor, Jake Stefanick, Matt Wallace, Dan Bologna, Kevin Bayonnet

Williams Honors College, Honors Research Projects

The group was tasked with designing a 3D printed glider. The scope of this assignment is to someday use the developed glider design and equip it with electronics and controls to deliver medical materials to remote areas in drone-like fashion. The glider was to be designed so that it could be printed using a lower-end, compact, and relatively portable 3D printer for optimal field efficiency. For this reason, the makerbot 3D printer was selected. The compact base plate of the makerbot printer left the team with strict size limitations, so the glider was printed in a series of nine parts …

Environmentally Friendly Alternates To Chemlok 233 Adhesive Cement, Madeline M. Busch

Williams Honors College, Honors Research Projects

The purpose of this project was to determine and qualify suitable, environmentally friendly replacement(s) for the current Chemlok 233 adhesive cement used by UTC Aerospace. Chemlok 233 was discontinued by the manufacturer based on the availability of a hazardous solvent (Trichloroethylene – TCE). The Chemlok 233 Control and four Experimental alternates with similar properties were lab tested for adhesion strength in various UTC proprietary cement specifications. The specifications modeled Chemlok’s uses in the construction of pneumatic de-icers. Chemlok 2332 was selected for use in Cement A, and Chemlok 402 was chosen for use in Cement B based on their highest …

Battery Test Chamber, Olivia Cole, Noah Purdy, Jacob Happ

Williams Honors College, Honors Research Projects

A battery test chamber was designed for temperature-controlled experiments on batteries. The apparatus is a standalone desktop unit capable of testing a battery of maximum size 2.25” x 2.25” x 2”. There are two separate chambers divided by a rotating, 90° door. The chamber halves are used for heating and cooling the battery, respectively. An adjustable mount for the battery allows for variation in sample size and securely holds the battery throughout the experiment. The operator can twist a knob on top of the box to spin the battery between the hot and cold chambers. The hot side is equipped …

Impedance Tube Alternative Via The Transfer Function Method, Nathan Palella, Griffin J. Binkley

Williams Honors College, Honors Research Projects

Typical industry-ready impedance tube systems for measuring sound absorption cost between $20,000 and $60,000. The scope of this project was to explore an industrial impedance tube and its functions as well as iteratively reduce the cost of each component of the system to its lowest possible conclusion without severely sacrificing quality of data acquisition. Replacement of the hardware and software with “off-the-shelf” alternatives and custom-made components can reduce the overall cost by as much as two orders of magnitude in order to be used in the education sector, mainly high schools. We find that the designed tube and driver replacements …

Guardian Condor, Kevin Bayonnet

Williams Honors College, Honors Research Projects

Our group has teamed up with Dr. Williams from Discovery Lab Global to research the capabilities of 3D printed Unmanned Aerial Vehicles (UAVs). The goal of our project is to deliver a 3D printed glider prototype which can later be fitted with electronics for controlled flight. The glider must also carry a payload of 2 to 3 pounds in addition to the electronics. These requirements must be met all while using a basic 3D printer with low cost plastic

Throughout the Fall 2017 semester, our group made a significant amount of progress by completing the conceptual design portion of the …

Human Powered Vehicle Design Team: Speed Variable Steering Stabilizer, Eric Miller, Matt Kraml

Williams Honors College, Honors Research Projects

The Human Powered Vehicle Competition (HPVC) is held annually by ASME at a few locations. The University of Akron has competed in the ASME-East and ASME-West competitions over the past handful of years against universities from all over the world. Objectives of each team for the competition are three-fold: vehicle design, racing performance, and innovation. Our senior design project involved working on the innovation concept for ASME-East 2018 held at Penn State University during the weekend of 4/13. Speed variable steering was decided upon by the entire HPVC team early in the design process as the innovation choice for this …

Building Entry Flood Barrier, Richard Esker, Shannon Mccall, Andrew Udovich, Brian Foust

Williams Honors College, Honors Research Projects

The purpose of this project is to develop a flood barrier that would resist flood water from entering through the doorways of a building. The goal is to mitigate extensive flooding within a structure. After the disastrous weather events that impacted American citizens late in the year of 2017, the team was inspired to develop a project to help disaster victims. Through extensive preliminary and market research, it was discovered that flooding is a serious issue that affects people all over the world. A product to stop flooding could benefit people in developed countries, but it could also help citizens …

Indicator-Supporting Fixture Based On A Time And Motion Study, James Anthony

Williams Honors College, Honors Research Projects

The design goal of this project was proposed by the sponsor company, Jay-Em Aerospace in Cuyahoga Falls, Ohio. I was tasked with observing a process carried out in the Assembly department by multiple people and charged with coming up with a fixture to improve safety, speed, and accuracy of this task. To determine how to make the process safer, interviews were conducted with the people who would usually be carrying out this process and determined their top concerns and issues with how it is carried out currently. To improve the speed and accuracy of the process, a "time and motion …

Autonomous Uav Battery Swapping, Reed Jacobsen, Nikolai Ruhe, Nathan Dornback

Williams Honors College, Honors Research Projects

One of the main hindrances of unmanned aerial vehicle (UAV) technology are power constraints. One way to alleviate some power constraints would be for two UAVs to exchange batteries while both are in flight. Autonomous mid-air battery swapping will expand the scope of UAV technology by allowing for indefinite flight times and longer missions. A single board computer will control each UAV’s flight software to respond to inputs to align with each other mid-flight. When the two UAVs have joined, mechanical components will exchange a depleted battery on the worker UAV for a freshly charged battery that belongs to the …

Impact Of Noise Level On Task Performance And Workload And Correlation To Personality, Kaylee Marie Eakins

Browse all Theses and Dissertations

An ideal work environment supports a culture of high performance, low mental workload, and quick turnarounds. The impact of noise on three types of tasks in a lab work environment were examined while attempting to identify correlations between a subject's personality and their tolerance to noise. Neuroticism, agreeableness, conscientiousness, and extroversion correlated significantly with subjective (NASA-TLX) and physiological mental workload measures (heart rate variability and eye-tracking). The results show that task type impacts the performance, task duration, and mental workload. Although the physiological workload measures showed significant impact, the parameters standard deviation of R-R intervals and LF/HF ratio agreed with …

Igniting Self-Directed Learning And Higher Level Workforce Competencies In An Aviation Curriculum, Timothy D. Ropp

IMPACT Presentations

Discusses the underlying concepts and pedagogies informing an IMPACT redesign course in Aviation, focused on developing workplace competencies and students' self-directed learning.

Understanding How First-Generation College Students’ Out-Of-School Experiences, Physics And Stem Identities Relate To Engineering Possible Selves And Certainty Of Career Path, Dina Verdín, Allison Godwin, Gerhard Sonnert, Phillip M. Sadler

School of Engineering Education Graduate Student Series

This full, research category study examines how out-of-school experiences in Grades 9-12 predict first-generation college students’ engineering possible selves and certainty of career path. The data for this study came from a large-scale survey on outreach programs which was distributed in first- semester English courses to capture an array of responses from students interested in STEM and non-STEM careers. We used structural equation modeling to examine a set of hypotheses: 1) out-of-school experiences would be mediated by interest and recognition in physics and STEM and no direct effect will be found for out-of-school experiences on physics and STEM identities, 2) …

Integrity Assessment Of Earthen Dams And Levees Using Cross-Plot Analysis Of Seismic Refraction And Electrical Resistivity Tomograms, Leti Teklu Wodajo

Electronic Theses and Dissertations

Geophysical methods provide a rapid, economical, non-invasive, and spatial coverage of the subsurface in terms of geophysical properties. On the other hand, geophysical methods can generate multiple geophysical anomalies. An anomaly on a seismic refraction or an electrical resistivity tomogram is an area that has different values compared to its surrounding. Geophysical anomalies in dams and levees can be due to the overall heterogeneity of the subsurface, structures such as principal spillways, artifacts of inversion software, or to a true compromised location, such as an air void due to internal erosion or seepage. Therefore, there is uncertainty involved with using …

Electrospinning Aqueous Solutions Of Poly(Ethylene Oxide) Using A Corona-Type Apparatus, Nicholas Neill

Williams Honors College, Honors Research Projects

The purpose of this project was to evaluate working parameters for the corona spinneret to create electrospun fibers/ fiber mat. This project was set-up using a Box-Behnken design of experiment. The working parameters were investigated by performing the electrospinning process, altering the working conditions, collecting the electrospun fibers. The scope of this project includes three primary operational conditions: distance between the spinneret and the collection plate, the viscosity (weight percent) of PEO in the spinning solution and the weight percent of NaCl in the spinning solution. The distance between the spinneret and the collection plate were varied to 18 cm, …

Ball Oscillating Bouncer, Eric Blok, Daniel Altemese, Ryan Nowacki, Maram Qurban

Williams Honors College, Honors Research Projects

The purpose of this report is to document the need, objectives, marketing and engineering requirements, as well as validate the design of an autonomous control device capable of continuously bouncing a table tennis ball on a paddle. This includes the design of a self correcting system using lightweight materials, and as few sensors and components as possible to achieve a compact, portable design. To accomplish this, the system is designed to react to a ball falling from as short a distance as 10 centimeters above the paddle, meaning all sensor processing, control processing, and motor drives should be able to …

Sports Spectator Beacon, Alexander Connelly

Williams Honors College, Honors Research Projects

The objective of this design project is to develop a system that can determine the location of an implemented beacon. The main operating technique used in determining the location is RSSI multilateration. The system consists of a beacon, network transmitters, mobile users, core processing and an interface with each software component for data transmission. The beacon is only an RF transmitter; therefore, receivers need to be able to interpret the signal of the beacon. In order to determine the location of the beacon from the receivers, the locations of the receivers must be known. The network transmitters’ act as a …

An Assessment Of Trihalomethanes And Haloacetic Acids On The Cancer Exposure Risk Of Ohio Drinking Water Systems, Stephen Sykes

Williams Honors College, Honors Research Projects

The cancer exposure risk from drinking chlorine-based disinfection by-products (DBPs) such as trihalomethanes (THMs) and haloacetic acids (HAAs) has been established as a major concern to public health as 98% of the United States drinking water systems in operation use chlorinated systems to disinfect the water they provide [2]. Using data collected from the Ohio Environmental Protection Agency from January 2014 to September 2017 in the cites of Cleveland, Columbus, Cincinnati, Canton, and Akron this study attempts to look at the risk of cancer caused by the DBPs. To show the relative risk of several different systems in operation from …

Wearable Hearing Accessory Technology, Tyler Cindea, Jaime Alcorn, Brooke Draper, Kyle Glascott, Ben Hanna, Robert Thoerner

Williams Honors College, Honors Research Projects

We set out in August 2017 to develop an active noise suppressing device that would be usable both in military and civilian activities. Due to constraints in knowledge and time, we decided our best course of action was to divide the project into two equal projects with the hope to be able to combine them into a single project at the end of the allotted time. This consisted of an active noise suppression device and a passive noise suppression device. The passive device would have no electronic components and the active device would be pure circuitry with no housing. This …

Budget Quadcopter Kit, Connor Bailey, Taylor Stephens

Williams Honors College, Honors Research Projects

Over the past few years quadcopters, also known as drones, have really started to take off in a recreational market. The technology has come a long way over the past decade and as with most technology, as it has matured it has become cheaper and more accessible to everyday people. So much so that anyone can go online and purchase a small quadcopter for under $20. They are relatively easy to fly and can even be flown indoors due to how safe they are as well. However, buying a quadcopter online doesn't really allow the consumer to develop a true …

The Influence Of Organic Pigments On Coating Properties, Sarah Medeiros

Williams Honors College, Honors Research Projects

Abstract

The purpose of this project was to identify the qualities of two synthesized organic pigments added to a coating. These high-performance pigments were benzodipyrrolidone and benzodifuranone, which are π-conjugated monomers. These pigments were each formulated into two different pigment concentrations and compared with a control that had no pigment. This project is limited by time constraints and the number of variables that can be tested in that time. Performance testing was conducted to evaluate the qualities of these coatings. The results demonstrated that the coatings were reproducible and most tests had results that were equal to or exceeded the …

Soil Moisture Sensor, Jaclyn Miller, Derek Bitecofer, Seung Jun Lee

Williams Honors College, Honors Research Projects

Since water is an important resource and not all communities around the world can afford to be liberal with their water needs; it has become important to use available water as efficiently as possible, especially in agriculture. For the purpose of reducing the overwatering of crops, an unattended ground moisture sensor can be implemented to measure the moisture level in the soil surrounding the plants. This will allow a farmer to know when to water or stop watering crops. For convenience, the moisture data information should be transmitted wirelessly to the user. The design of an unattended ground moisture sensor …

Engineering Technology And Engineering Program Comparison Of Underrepresented Students In The Same Institution, Anne M. Lucietto, Lesley M. Berhan

School of Engineering Technology Faculty Publications

Engineering programs include far fewer African American students than engineering technology students enrolled in four-year programs at universities offering both ABET accredited programs. Several studies show this contrast, suggesting that further research in this area is warranted. The rationale for the higher population of students consistently in one program over the other is generally unknown. While researchers study the engineering population, the engineering technology population goes relatively unnoticed. The effects of a student’s past and current environments in engineering technology are relatively unknown. Researchers developed a survey to gather data from underrepresented populations in universities that meet the noted criteria. …

International Experience Of Engineering Technology Students Learning About Renewable Energy, Anne M. Lucietto

School of Engineering Technology Faculty Publications

Cultural exposure is said to be an enhancement to collegial learning. With this in mind, students in an engineering technology program were given the opportunity to go to Germany to a regional university, experience education in that setting, and visit sites dedicated to renewable energy. The students were given a two-week experience that taught them through both formal and informal means. Ultimately, students experienced curiosity, openness to different cultural norms, and were able to identify components of other cultural perspectives responding with their own worldviews. The researchers utilized the Miville-Guzman Universality Diversity Scale (M-GUDS-S) to assess pre and post activity …

Engineering Technology Students: Do They Approach Capstone Courses Differently Than Other Students?, Frederick Berry, Anne M. Lucietto, Andrew Scott

School of Engineering Technology Faculty Publications

Using data collected from students in engineering technology, engineering, and other areas such as computer science a comparison of student reactions to the capstone course are coded and sorted. Using content analysis methods, the researchers compare and contrast the various student groups and their reactions to assigned capstone projects. They are also able to assess student interaction with faculty and industry mentors. Researchers strive to learn more about these various student approaches to the capstone experience and to further our understanding of best practices in capstone courses.

Stem Educators: Who Are They?, Anne M. Lucietto, Liza Ann Russell

School of Engineering Technology Faculty Publications

Technical education or STEM (Science, Technology, Engineering, and Mathematics) education is often touted as the way for students to succeed, for corporations to move forward, and to gain prominence in the world economy. With all this promotion, do we know who is teaching these subjects to our students? This question urged researchers to develop a survey and distribute it to those teaching STEM subjects. The survey collected a variety of information, the results of the demographic section being reported here. The survey responses are from a population of STEM educators teaching at all levels, found to be male and generally …

Additive Manufacturing And Performance Of Architectured Cement-Based Materials, Mohamadreza Moini, Jan Olek, Jeffrey P. Youngblood, Bryan Magee, Pablo D. Zavattieri

Lyles School of Civil Engineering Faculty Publications

There is an increasing interest in hierarchical design and Additive Manufacturing (AM)of cement-based materials. However, the brittle behavior of these materials and the presence of interfaces from the additive manufacturing process represent the current major challenges. Our work focuses on harnessing the heterogeneous interfaces by employing clever designs from bio-inspired Bouligand architectured materials. In this paper, we aim to demonstrate some key mechanisms that can allow brittle hardened cement-based materials to gain flaw-tolerant properties. Mechanisms such as cracktwisting at the interfaces have been previously observed in naturally-occurring orsynthetic composite Bouligand architectures. In this paper, a heterogeneous interface with porous characteristics …

Spacecraft Fire Safety Research: Combustion Of Lithium-Ion Batteries To Predict Fire Scenarios, Elisabeth Meyer

Williams Honors College, Honors Research Projects

The purpose of this project was to research characteristics of a Lithium-ion battery fire to determine if trends exist in measured fire characteristics that can help predict different fire scenarios. These experiments will ultimately aid in developing an alarm threshold for a spacecraft smoke detector, specifically for Orion, a new, multi-purpose crew vehicle under development by NASA. Orion is the next-generation of spacecraft designed to replace the space shuttle and will play an important role in NASA’s journey to Mars.

In the experiments performed, Lithium-ion batteries were placed in a test chamber and ignited while smoke concentration was measured, simulating …

Effects Of Hofmeister Ions On Gelation Of Gelatin And Pluronic Hydrogels, Eric Britton

Williams Honors College, Honors Research Projects

The purpose of the project was to observe the effects of the Hofmeister series of ions on the gelation of gelatin and Pluronic-127 hydrogels. Hydrogels are semi-solid materials that contain a network of joined molecules through intermolecular interactions which are capable of holding water. Gelatin and Pluronic-127 (PF-127) are thermoreversible, physical crosslinked gels. Gelation occurs when temperature, or other driving forces, reduce the polymer chain solubility until a distinct 2-phase system forms. When aqueous ions are present in solution, they exhibit specific ion effects that have either a stabilizing or destabilizing effect on the solubility of proteins and other polymers. …

Interfacial Corrosion Of Copper And The Formation Of Copper Hydroxychloride, Mary Teague, Shengxi Li, Hongbo Cong

Williams Honors College, Honors Research Projects

Electrical circuitry is an industry, among many others, heavily using the element of copper. Ensuring the mechanical integrity of Cu is crucial, especially in salt environments, for the multifaceted composition of circuits. 4N NaCl solution (equilibrium concentration in ~84% RH) simulated this three-phase system. Rectangular Cu samples were partially immersed in both ambient and continuous lab air sparging atmospheres to understand waterline corrosion of the metal. Open circuit potentials (OCP) were continuously taken during the immersion testing for a maximum of 5 days. A scanning electron microscopy (SEM) equipped with an energy dispersive X-ray spectrometer (EDS), Raman spectroscopy, and 3-D …

Tandem Mass Spectrometry (Ms/Ms) For Determination Of Architecture Of Synthetic Polymers, Shoumik Saha

Williams Honors College, Honors Research Projects

Tandem Mass Spectrometry (MS/MS) was used to determine the architecture of synthetic polymers and they are difluorene-N₃, 3-difluorene-N₃ and VPOSS-3-difluorene. VPOSS materials usually exhibit electrochemical properties and the research was performed to determine their accurate structure and to provide evidence of their proper synthesis. The compounds were mixed with a matrix solution, DCTB, and a silver salt to enable proper protonation. The solvent mixture was on a MALDI plate and then put into the mass spectrometer. The mass spectrum generated was analyzed and each fragment was identified to structures with the synthetic polymers via ChemDraw. Thus, trial …