Engineering Commons^™

Development Of A Dynamic Model And Control System For Load-Following Studies Of Supercritical Pulverized Coal Power Plants, Parikshit Sarda, Elijah Hedrick, Katherine Reynolds, Debangsu Bhattacharyya, National Energy Technology Laboratory

Faculty & Staff Scholarship

Traditional energy production plants are increasingly forced to cycle their load and operate under low-load conditions in response to growth in intermittent renewable generation. A plant-wide dynamic model of a supercritical pulverized coal (SCPC) power plant has been developed in the Aspen Plus Dynamics® (APD) software environment and the impact of advanced control strategies on the transient responses of the key variables to load-following operation and disturbances can be studied. Models of various key unit operations, such as the steam turbine, are developed in Aspen Custom Modeler® (ACM) and integrated in the APD environment. A coordinated control system (CCS) is …

H.F. Hauff Electric Pruner Drive Train, Grady Graff

All Undergraduate Projects

The H.F. Hauff Company invests a large amount of money in developing a quality pruner used in everyday agriculture. Modern electric pruners tend to be expensive while manual tree pruning is very physically demanding. A battery assisted pruner that is light-weight, ergonomic, inexpensive to build and powerful enough to cut branches that a nominal apple tree would possess is the direct affiliation that H.F. Hauff devotes its funding too. A team of engineering students from Central Washington University developed a product with consideration to each of these circumstances. Since hand drills have proven to be user friendly and of abundance …

A Comparison Of Real Time Stream Processing Frameworks, Jonathan Curtis

Dissertations

The need to process the ever-expanding volumes of information being generated daily in the modern world is driving radical changes in traditional data analysis techniques. As a result of this, a number of open source tools for handling real-time data streams has become available in recent years. Four, in particular, have gained significant traction: Apache Flink, Apache Samza, Apache Spark and Apache Storm. Despite the rising popularity of these frameworks, however, there are few studies that analyse their performance in terms of important metrics, such as throughput and latency. This study aims to correct this, by running several benchmarks against …

2018 Scholarly Productivity Report, Missouri University Of Science And Technology

Civil, Architectural and Environmental Engineering Scholarly Productivity Reports

No abstract provided.

Automating The Crowd-Mapping Workflow With Deep Learning, Lasith Niroshan

Theses

Maintaining updated maps in an ever-changing built environment is important for supporting modern society in many ways. The usage of online crowdsourced maps in particular has gained importance in a wide range of recent location-based applications (route planning/navigation, urban planning, real estate, tourism, etc). However, both traditional map production methods and updating today’s online maps suffer from early obsolescence due to their largely manual map production/update workflows. Significant research efforts have focused on refining techniques to identify changes in raster satellite images, aiming to improve and streamline map production processes. Concurrently, the surge in Internet usage has led to a …

Me-Em 2017-18 Annual Report, Department Of Mechanical Engineering-Engineering Mechanics, Michigan Technological University

Department of Mechanical and Aerospace Engineering Annual Reports

Table of Contents

• Curriculum Revision
• The Result: MEP I-IV
• ME-EM Research
• Alumni Features
• Enrollment & Degrees
• Graduates
• Faculty & Staff
• Alumni
• Donors
• Contracts & Grants
• Patents & Publications

Vertical Stress And Stability Of Interburden Over An Abandoned Pillar Working Before Upward Mining: A Case Study, Jinwen Bai, Guorui Feng, Shanyong Wang, Tingye Qi, Jian Yang, Jun Guo, Zhen Li, Xianjie Du, Zehua Wang, Yunlou Du, Yujiang Zhang

Faculty & Staff Scholarship

Upward mining of the residual coal seam over an abandoned pillar working is one of the effective measures to alleviate the contradiction between limited resources and increased consumption. Interburden stability over an abandoned pillar working plays a significant role in guaranteeing the safety of upward mining; however, it has not yet been extensively studied and understood. In this study, the vertical stress of the interburden over an abandoned pillar working was first investigated. The mechanical model of the interburden was established and the damage conditions were analysed. Then, the stability of the interburden over 38502 abandoned workings in Baijiazhuang coal …

Hardware Security And Vlsi Design Optimization, Hao Xue

Browse all Theses and Dissertations

Microelectronic circuit is ubiquitous component of modern electrical devices. The increasing complexity and professionality of phases in microelectronic supply chain bring more global cooperation to integrated circuit (IC) production. Therefore, providing a secure environment for microelectronic circuit design does not ensure the integrity of the hardware since any participator of IC fabrication has the opportunity to implant a malicious alteration in original IC design. Especially overseas chip-fabrication is a vital potential threat for national defense products. In theory, anyone who has access to fabrication process can tamper with the original design, with the potential to change function, modify parametric properties …

Multi-Scale And Multi-Modal Streaming Data Aggregation And Processing For Decision Support During Natural Disasters, Shruti Kar

Browse all Theses and Dissertations

With the surge in digital information systems, there is a data deluge from various sources that can be analyzed and integrated to produce relevant, reliable and actionable information, for better decision making. We employ multi-modal data (i.e., unstructured text, gazetteers, and imagery) for an aggregate level analysis and location-centric demand/request matching in the context of disaster relief. After classifying the Need expressed in a tweet (the WHAT), we leverage OpenStreetMap to geolocate that Need on a computationally accessible map of the local terrain (the WHERE) populated with location features such as hospitals and housing. Further, our novel use of flood …

Real-Time Path Planning And Obstacle Avoidance For Mobile Robots With Actuator Faults, Ravindra Vibha Bellur

Browse all Theses and Dissertations

In this research, a fault-tolerant path planning and obstacle avoidance algorithm is implemented for mobile ground robots. The fault-tolerant system architecture consists of the following three components: (1) an online fault diagnosis module for detecting and estimating actuator faults in the mobile robot; (2) a localization and mapping module for dynamic terrain mapping and obstacle detection; (3) a path planning and obstacle avoidance module for generating way points from a given point to the desired destination, avoiding the detected obstacles and moving along these way points. The online fault diagnostic information is used to compensate for the effect of faults, …

Development Of An Ios App For Learning Intonation Of Wind Instruments, Swathi Pamidi

Browse all Theses and Dissertations

Learning music instrument is a challenging task for a beginner without constant guidance from an instructor. The primary objective of this thesis research is to design and develop an iOS mobile / iPad learning app that helps users to learn and practice intonation for a suite of wind instruments by themselves with comfort and ease through app-provided tuning and charting guidance and app-assisted self-assessment. Particularly, our successfully-implemented app provides the following features to enhance the user's learning experience: 1 ) Provides learners easy-to-access information for the fingering and tuning techniques of wind instruments by converting Dr. Shelley Jagow's book - …

Isolation And Onboarding: Gender Bias In Aviation Training Documents, William Hart

Technical Communication Capstone Course

There is a growing interest in male-dominated industries and the challenges women face finding their place within the workplace community. Yet, there seems to be little research on how training documents, generally created by technical communicators, may isolate and limit women who seek to pursue careers in these fields. Technical communication and gender scholars have examined women in the technical communication field and gender bias in male-dominated industries but have not yet examined gender stereotypes in training documents. Training documents are designed to provide written instructions and a reference guide for job functions, workplace rules, orientation, and company policies. This …

Quality Improvement Of Recycled Concrete Aggregate Using Polymers, Ahmed Ali Abdrabbou

Master's Theses and Doctoral Dissertations

Crushed concrete is one of the main resources for sustainable material. As this material should not be wasted, this research aims to assess the reuse of crushed concrete material as a resource of sustainable construction material. In this thesis, two types of polymer were mixed with crushed concrete to improve its fragmentation resistance, water absorption, and permeability. Water base polymer is an eco-friendly and cost-effective material, which has been used frequently to improve the quality of crushed concrete. This thesis contributes to the improvement of crushed concrete performance by improving the aggregate properties when it is mixed with a polymer, …

A 3d Cancer Cell Migration Assay On A 384-Pillar Plate With Sidewalls, Nicholas Lesh, Alexander Roth, Stephen Hong, Oju Jeon, Eben Alsberg

Undergraduate Research Posters 2018

Hepatocellular carcinoma (HCC) is an aggressive liver cancer where prognosis is heavily tied to metastasis progression. Researchers look to determine the triggers for metastasis to control its spread. The goal of this project is to determine these triggers by quantifying Hep3B cell migration on a high-throughput platform. We infected Hep3B cells with lentiviruses containing mCherry to produce stable fluorescent cells. Next, we determined the stability of growth factors in oxidized, methacrylated alginate (OMA) hydrogel by binding growth factors with methacrylated heparin sulfate (MHS) before encapsulating in OMA, printing onto the 384-pillar plate with sidewalls, and quantifying growth factor release via …

Spark Plasma Sintering Of Soft Magnetic Materials, Harnavdeep Kaur, Taban Larimian, Javier Esquivel

Undergraduate Research Posters 2018

Over the past 3 decades, iron-based soft magnetic alloys such as Finemet (Fe73.5Si13.5B9Nb3Cu1 (at%)) have attracted great interest due to their exceptional magnetic properties like high magnetization, low coercivity, and high curie temperature. However, the production of amorphous precursor requires very high cooling rates, and thus only wires, powders, and thin ribbons are achievable, yet these are not suitable in industrial applications where large volume of bulk magnetic components is required. Mechanical alloying (MA) has gained special attention as a powerful non-equilibrium process for fabricating amorphous and nanocrystalline materials, whereas spark plasma sintering (SPS) is a unique technique for processing …

Learning Local, Quenched Disorder In Plasticity And Other Crackling Noise Phenomena, Stefanos Papanikolaou

Faculty & Staff Scholarship

When far from equilibrium, many-body systems display behavior that strongly depends on the initial conditions. A characteristic such example is the phenomenon of plasticity of crystalline and amorphous materials that strongly depends on the material history. In plasticity modeling, the history is captured by a quenched, local and disordered flow stress distribution. While it is this disorder that causes avalanches that are commonly observed during nanoscale plastic deformation, the functional form and scaling properties have remained elusive. In this paper, a generic formalism is developed for deriving local disorder distributions from field- response (e.g., stress/strain) timeseries in models of crackling …

Formation And Regeneration Of Shape-Selective Zsm-35 Catalysts For N‐Butene Skeletal Isomerization To Isobutene, Quan Xu, Wenjing Yang, Zhiwei Chen, Yingchun Ye, Yan Luo, Jason Street, Hongjun Zhou, Chunming Xu

Faculty & Staff Scholarship

Skeletal isomerization of n-butene to isobutene was performed over formed ZSM-35 zeolites in a lab-scale, fixed-bed reactor. The formation conditions to produce isobutene with zeolites were varied to determine the most advantageous binding agent (pseudo-boehmite) amount and steam dealumination conditions. The optimal binding agent amount was 20 wt %. Steam dealumination stabilized the catalysts and enhanced the catalytic performance because of the stable Si/Al framework and suitable acidity. The optimized process conditions involved a reaction temperature of 410 °C, a weight hourly space velocity of 5 h−1, and an n-butene concentration in feedstock of 50%. After being on-stream for 296 …

Hurricane Evacuation Modeling Using Behavior Models And Scenario-Driven Agent-Based Simulations, Yuan Zhu, Kun Xie, Kaan Ozbay, Hong Yang

Computational Modeling & Simulation Engineering Faculty Publications

Transportation modeling and simulation play an important role in the planning and management of emergency evacuation. It is often indispensable for the preparedness and timely response to extreme events occurring in highly populated areas. Reliable and robust agent-based evacuation models are of great importance to support evacuation decision making. Nevertheless, these models rely on numerous hypothetical causal relationships between the evacuation behavior and a variety of factors including socio-economic characteristics and storm intensity. Understanding the impacts of these factors on evacuation behaviors (e.g., destination and route choices) is crucial in preparing optimal evacuation plans. This paper aims to contribute to …

Revitalizing The Moment Distribution Method: A Fast And Exact Analysis Of Multibay, Multi-Story Frames., Jackson Kong, Simon Ho Fai Wong

Faculty of Science & Technology (THEi)

The conventional moment distribution method is revitalized with a new approach which requires only one-cycle of balance and carry-over and no iteration. For a continuous beam, the method begins by assuming the value of the balancing moment, say x, at the first joint. By invoking the moment equilibrium condition successively from the first towards the last joints, balancing and carry-over moments at other joints can be determined in terms of the unknown x without iteration. By means of moment equilibrium of the last joint, the unknown x can be solved exactly, regardless of the number of spans, and the final …

Experimental Study Of A Novel Subcooling Method Based On Liquid Desiccant Dehumidification For Vapor-Compression Refrigeration Systems., Xiaohui She, Yonggao Yin, Yimo Luo, Lindeman Brett, Dan Zhong, Xiaosong Zhang

Faculty of Science & Technology (THEi)

Refrigerant subcooling could increase the refrigerating capacity and potentially improve the performance of refrigeration systems. In this paper, a novel subcooling method is experimentally studied for the first time in a hybrid vapor compression refrigeration system. In this system, condensation heat (~40 °C) is used to drive an integrated subcooling cycle to subcool the refrigerant leaving the condenser, which significantly increases the system performance. Changes in system performance are measured as functions of the following variables: the mass flow rates of the dehumidification air, ambient air, dehumidification solution, regeneration solution, and spraying water. Comparisons are made between the proposed system …

Simultaneous Measurement Of Displacement And Temperature Based On Baloon - Shaped Bent Smf Structure Incorporating An Lpg, Ke Tian, Wenlei Yang, Gerald Farrell, Elfed Lewis, Xianfan Wang, Pengfei Wang

Articles

Abstract—A novel optical fibre sensor based on a balloon-shaped bent single-mode (BSBS) fibre structure incorporating a long-period grating (LPG) for simultaneous measurement of displacement and temperature is described and experimentally demonstrated. The sensor is fabricated by splicing a BSBS fibre structure formed Mach-Zehnder interferometer (MZI) with an LPG. Due to the interference dip which is formed by the BSBS fibre structure is sensitive to external displacement and temperature variation, while that formed by LPG only depends on temperature, displacement and temperature therefore can be unambiguously and simultaneously measured by this sensor. Experimental results show that this sensor offers a high …

Composite Cutting Device, Mikhail Minasyan

All Undergraduate Projects

Title and Author: Composite Cutting Device by Misha Minasyan (Mechanical Engineering Technology)

As the aerospace industry innovates, so does the material that is being used. No longer are airplane manufacturers like Boeing depending on only various metals for making their wings. A transition over the past few years has been made to using composite materials because of there light weight and strength. The issue that composite material brings is that it cannot be recycled without processing. The current 777X made by Boeing has transitioned to used composite to manufacture their airplane wings.

A two student team developed two separate processes …

Introduction - Syllabus, C. Ariel Pinto

Module 1: Fundamentals of Cybersecurity Risk Management

Cybersecurity risk management is a necessary tool for decision making for all management levels from tactical to strategic and creating a common understanding between people from diverse domains or having different priorities. This course adopts a multidisciplinary perspective. It creates a common understanding of risk for a diverse set of students which are coming from different disciplines such as technical, social, economics, law, and politics to remove communication barriers between strategic, operational, and tactical level decision makers.

The course covers related government and industry regulations and standards along with best practices frequently used to assess, analyze and manage cyber risks, …

Influence Of Atmospheric Clearness On Pdlc Switchable Glazing Transmission, Aritra Ghosh, Brian Norton, Tapas K. Mallick

Articles

Electrically activated switchable polymer dispersed liquid crystal (PDLC) is suitable for adaptive windows. A particular type requires 20V to become 71% transparent while in the absence of power it is 27% transparent. Glazing transmission changes with light incident angle. As the clearness of a sky changes the fraction changes alter of direct insolation (that has an azimuthally changing incident) and diffuse insolation (that has a largely constant incident). Thus, the effective overall incident angle determining the glazing transmittance also changes. In this work for the first time, the variation of PDLC glazing transmission with clearness index has been investigated.

Versatile Soliton Emission From A Ws2 Mode-Locked Fiber Laser, Bo Guo, Shi Li, Ya-Xian Fan, Pengfei Wang

Articles

Recently, few-layer tungsten disulfide (WS2), as a shining 2D material, has been discovered to possess both the saturable absorption ability and large nonlinear refractive index. Here, we demonstrate versatile soliton pulses in a passively mode-locked fiber laser with a WS2-deposited microfiber. The few-layer WS2 is prepared by the liquid-phase exfoliation method and transferred onto a microfiber by the optical deposition method. Study found, the WS2-deposited microfiber can operate simultaneously as a mode-locker and a high-nonlinear device. In experiment, by further inserting the WS2 device into the fiber laser, besides the dual-wavelength soliton, noise-like soliton pulse, conventional soliton and its harmonic …

Fabrication And Characterization Of A Magnetized Metal-Encapsulated Fbg Sensor For Structural Health Monitoring, Sagar Jinachandran, Huijun Li, Jiangtao Xi, B. Gangadhara Prusty, Yuliya Semenova, Gerald Farrell, Ginu Rajan

Articles

A novel means of metal packaging of a fiber Bragg grating (FBG) sensor using stainless steel and tin, together with high temperature resistant samarium cobalt (SmCo) magnet is proposed in this paper. The inclusion of high temperaturecapable SmCo magnets enable the metal packaging of the FBG sensor with magnetic capabilities. This packaged sensor can be placed in direct contact with the substrate structures such as iron pipelines and other ferromagnetic components without any adhesives, making them easily detachable and reusable. This is a significant improvement compared with other commercial fiber optic sensors which are, surface attached using epoxies or welded …

Comparing The Effectiveness Of Different Classification Techniques In Predicting Dns Tunnels, Patrick Walsh

Dissertations

DNS is one of the most widely used protocols on the internet and is used in the translation of domain names into IP address in order to correctly route messages between computers. It presents an attractive attack vector for criminals as the service is not as closely monitored by security experts as other protocols such as HTTP or FTP. Its use as a covert means of communication has increased with the availability of tools that allow for the creation of DNS tunnels using the protocol. One of the primary motivations for using DNS tunnels is the illegal extraction of information …

Cost Benefit Evaluation Of Maintenance Options For Aging Equipment Using Monetised Risk Values: A Practical Application, Maria Chiara Leva, G. Baldissone, R. Caso, M. Demichela, L. Lawlor, B. Mcaleer

Conference Papers

With constant pressure to reduce maintenance costs as well as short-term budget constraints in a changing market environment, asset managers are compelled to continue operating aging assets while deferring maintenance and investment. The scope of the paper is to get an overview of the methods used to evaluate risks and opportunities for deferred maintenance interventions on aging equipment, and underline the importance to include monetised risk considerations and timeline considerations, to evaluate different scenarios connected with the possible options. Monetised risk values offer the opportunity to support risk-based decision-making using the data collected from the field. The paper presents examples …

Non-Crossing Partitions And Milnor Fibers, Colum Watt, Michael Falk, Thomas Brady

Articles

For a finite real reflection group, W, we use non-crossing partitions of type W to construct a finite cell complex with the homotopy type of the Milnor fiber of the associated W–discriminant, Δ_W, and another with the homotopy type of the Milnor fiber of the defining polynomial of the associated reflection arrangement. These complexes support natural cyclic group actions realizing the geometric monodromy. Using the shellability of the non-crossing partition lattice, this cell complex yields a chain complex of homology groups computing the integral homology of the Milnor fiber of Δ_W.

Toxicity Screening Of Biochar-Mineral Composites Using Germination Tests, Jan Mumme, Josephine Getz, Munoo Prasad, Ulf Lüder, Kern Jurgen, Ondrej Masek, Wolfram Buss

Articles

This study assessed the properties and toxicity (water cress germination trials) of 38 waste-derived, novel biochar-mineral composites (BMCs) produced via slow pyrolysis and hydrothermal carbonization (hydrochars). The biochars were produced from sewage sludge and compost-like output (CLO) by varying the type of mineral additive (zeolite, wood ash and lignite fly ash), the mineral-to-feedstock ratio and the carbonization process. While pure hydrochars completely inhibited germination of water cress, this effect was ameliorated by mineral additives. Seedlings grew best in pyrolysis chars and while wood ash addition decreased plant growth in many cases, 1:10 addition to CLO doubled germination rate. The factors …