Engineering Commons^™

Investigation Of Geometric And Thermal Scaling Effects On Simulated Turbine Vane Leading Edge Model, James G. Tewaheftewa

Theses and Dissertations

Film cooling is still a bustling research topic, especially with burgeoning manufacturing techniques on the horizon that will open the design space. However, despite the number of years that have gone into gas turbine design and research, evaluating cooling performance on components still presents challenges. This task becomes especially difficult and dangerous if trying to do so in realistic engine conditions. Therefore, the majority of film cooling research is performed at conditions far from realistic engine conditions, often using materials that would never hold up to turbine inlet temperature, and scaled to predict results at engine conditions. Previous film cooling …

Characterization And Analysis Of Plasma Instabilities In A 600 W Permanent Magnet Hall Thruster, Samuel D. Wright

Theses and Dissertations

Electric propulsion is an important technology for the future of space operations and exploration. Within the range of electric propulsion devices, Hall Effect Thrusters provide a balance of thrust and specific impulse well-suited for many Earth-centric missions. Hall Effect Thrusters have been studied since their development in the 1960s and have been flown on hundreds of spacecraft, but the intimate details of the plasma behavior within the thruster exhaust plume are still not well understood. Furthering this knowledge may be key to improving thruster design to yield better performance and longer lifetimes. To this end, experiments were conducted to measure …

Estimating Defensive Cyber Operator Decision Confidence, Markus M. Borneman

Theses and Dissertations

As technology continues to advance the domain of cyber defense, signature and heuristic detection mechanisms continue to require human operators to make judgements about the correctness of machine decisions. Human cyber defense operators rely on their experience, expertise, and understanding of network security, when conducting cyber-based investigations, in order to detect and respond to cyber alerts. Ever growing quantities of cyber alerts and network traffic, coupled with systemic manpower issues, mean no one has the time to review or change decisions made by operators. Since these cyber alert decisions ultimately do not get reviewed again, an inaccurate decision could cause …

Assessing The Competing Characteristics Of Privacy And Safety Within Vehicular Ad Hoc Networks, Jacob W. Connors

Theses and Dissertations

The introduction of Vehicle-to-Vehicle (V2V) communication has the promise of decreasing vehicle collisions, congestion, and emissions. However, this technology places safety and privacy at odds; an increase of safety applications will likely result in the decrease of consumer privacy. The National Highway Traffic Safety Administration (NHTSA) has proposed the Security Credential Management System (SCMS) as the back end infrastructure for maintaining, distributing, and revoking vehicle certificates attached to every Basic Safety Message (BSM). This Public Key Infrastructure (PKI) scheme is designed around the philosophy of maintaining user privacy through the separation of functions to prevent any one subcomponent from identifying …

Modeling A Space-Based Quantum Link, Alexander W. Duchane

Theses and Dissertations

Quantum sources and single photon detectors have improved, allowing quantum algorithms for communication, encryption, computing, and sensing to transition from theory and small-scale laboratory experiments to field experiments. One such quantum algorithm, Quantum Key Distribution, uses optical pulses to generate shared random bit strings between two locations. These shared bit strings can be turned into encryption keys to be used as a one-time-pad or integrated with symmetric encryption techniques such as the Advanced Encryption Standard. This method of key generation and encryption is resistant to future advances in quantum computing which significantly degrade the effectiveness of current asymmetric key sharing …

Assured Android Execution Environments, Brandon P. Froberg

Theses and Dissertations

Current cybersecurity best practices, techniques, tactics and procedures are insufficient to ensure the protection of Android systems. Software tools leveraging formal methods use mathematical means to assure both a design and implementation for a system and these methods can be used to provide security assurances. The goal of this research is to determine methods of assuring isolation when executing Android software in a contained environment. Specifically, this research demonstrates security properties relevant to Android software containers can be formally captured and validated, and that an implementation can be formally verified to satisfy a corresponding specification. A three-stage methodology called "The …

Mitigating The Effects Of Boom Occlusion On Automated Aerial Refueling Through Shadow Volumes, Zachary C. Paulson

Theses and Dissertations

In flight refueling of Unmanned Aerial Vehicles (UAVs) is critical to the United States Air Force (USAF). However, the large communication latency between a ground-based operator and his/her remote UAV makes docking with a refueling tanker unsafe. This latency may be mitigated by leveraging a tanker-centric stereo vision system. The vision system observes and computes an approaching receiver's relative position and orientation offering a low-latency, high frequency docking solution. Unfortunately, the boom -- an articulated refueling arm responsible for physically pumping fuel into the receiver -- occludes large portions of the receiver especially as the receiver approaches and docks with …

Managing Supply Discrepancies: The Effect Of Performance Measurement And Feedback On Order Fulfillment Quality, Michael J. Weber

Theses and Dissertations

Extensive research on the impact of shipping and packaging errors in the private sector finds numerous negative outcomes, including reduced customer satisfaction, reduced customer loyalty, and lower profitability. However, little research has been done examining the impact of order fulfillment errors on military operations. The purpose of this research is to quantify the impact of supply discrepancy reports (SDRs) on military aircraft readiness metrics, including cannibalizations, not mission capable supply (NMCS) hours, aircraft availability and MICAP hours. Results show SDRs significantly impact aircraft readiness metrics in seven of the fifteen analyses conducted. Additionally, a quasi-experimental study is implemented at DLA …

United States Air Force Applications Of Unmanned Aerial Systems: Modernizing Airfield Damage Assessment, Samuel M. Clark

Theses and Dissertations

Modernizing airfield damage assessment has long been a priority mission at the Air Force Civil Engineer Center (AFCEC). Previously, AFCEC has made advances to expedite unexploded ordnance (UXO) neutralization and pavement repair. Missing from these initiatives is the initial assessment component. This thesis expands the idea of using Small Unmanned Aerial Systems (SUAS), applies it to the Air Force mission, and provides SUAS vehicle configuration and sensor recommendations. In this study, 25 civil engineer officers reviewed airfield imagery gathered using two small air vehicles. For the first review, participants attempted to identify UXOs and foreign object debris (FOD) in a …

Building Evidence The Federal Aviation Administration's Uas Safety Strategy Needs Improvement, Ryan J. Wallace, Tom Haritos, John Robbins

International Journal of Aviation, Aeronautics, and Aerospace

The growth of unmanned aircraft operations within the National Airspace System (NAS) reveal an uptick of alarming safety indicators that suggest unmanned aircraft system (UAS) regulatory policy may require adjustment. Recent reports of aircraft collisions with UAS, an increase in pilot-reported near-misses, and research findings that indicate UAS platforms are capable of causing structural damage to aircraft suggest safe and effective UAS integration may not be proceeding as planned. The authors examine several safety indicators within the context of Heinrich’s Triangle to reveal the UAS industry’s susceptibility to evolving safety-related problems.

Assessment Of Drinking Water Quality Management And A Treatment Feasibility Study For Brick By Brick Water Storage Tanks In Rakai Uganda, James V. Murduca

USF Tampa Graduate Theses and Dissertations

Reliable access to safe drinking water is one necessity for humans to live without concern for major health risks. The overall goal of this research is to improve the public health, through improved drinking water, for communities in the Rakai District in Uganda, directly, and other communities in the world, indirectly, via dissemination of knowledge. This study specifically assessed the knowledge of drinking water quality in regards to public health, their sanitation measures, and water treatment methods for users of Brick by Brick rainwater harvesting tanks in the Rakai District (N = 28) by using a knowledge, attitudes, and practice …

Promoter Effects On Iron-Based, Sba-15 Supported Ultra-High Temperature Fischer- Tropsch Catalysts, David P. Weber

USF Tampa Graduate Theses and Dissertations

Promoter effects on SBA-15 supported iron Fischer-Tropsch catalysts were investigated for their potential to improve high temperature catalyst performance. FTS catalysts promoted by manganese (0.15%-1.4%), copper (0.15%-1%), and potassium (0.5%-3%), with all percentages stated on the basis of mass percentage of final catalysts, were prepared and tested at 430°C and ambient pressure in a fixed bed reactor. Manganese showed the ability to promote the FT reaction, increasing both the CO conversion and the average chain length of hydrocarbon products. Compared to the unpromoted catalyst composed only of iron supported on SBA-15, 1.4%Mn (mass) promotion of 15% (mass) iron on SBA-15 …

Direct Print Additive Manufacturing Of Optical Fiber Interconnects, Roger B. Tipton

USF Tampa Graduate Theses and Dissertations

High performance communications, sensing and computing systems are growing exponentially as modern life continues to rely more and more on technology. One of the factors that are currently limiting computing and transmission speeds are copper wire interconnects between devices. Optical fiber interconnects would greatly increase the speed of today’s electronic devices. In this study it has been demonstrated that by using a new Direct Print Additive Manufacturing (DPAM) process of Fused Deposition Modeling (FDM) of plastic and micro-dispensing of pastes and inks, we can 3D print single and multi-mode optical fibers in a controlled manner such that compact, 3-dimensional optical …

Graduate Outreach Services: Perspectives From Two University Library Programs, Corinne Bishop Edd, Nashieli Marcano Phd

Transforming Libraries for Graduate Students

This session highlights graduate outreach services at the University of Central Florida and Clemson University libraries and compares institutional program approaches, outreach strategies, and the research needs of student populations in the Social Sciences and Engineering.

The presenters coordinate graduate outreach services at their institutions, and the first part of the presentation will include a discussion of each institution’s service model and each librarian’s role. Details about collaborations with campus partners and networking, f2f workshops and use of online platforms (Canvas LMS) to promote services, recruiting outreach advocates, and marketing programs will also be discussed.

The second part of the …

Measuring The Creep Behaviour Of Corrugated Board By Cascade And Individual Test Rig, Viktoria Köstner, Jörg B. Ressel, Bernd Sadlowsky, Péter Böröcz

Journal of Applied Packaging Research

In this paper static and quasi-static test are conducted to determine the creep behaviour of corrugated board. This study shows a possible way to take the real loads occurring in container shipping into account. The aim of the measurements is to develop a new test option, which is in keeping with the loads occurring. Two test rigs have been developed and constructed for this purpose. These make it possible to measure the creep of corrugated board extremely precisely over a longer period in the aspect of climate chamber size and relative humidity (RH) distribution in the chamber. To increase the …

Selective Laser Melting Of Ni-Rich Niti: Selection Of Process Parameters And The Superelastic Response, Narges Shayesteh Moghaddam, Soheil Saedi, Amirhesam Amerinatanzi, Ehsan Saghaian, Ahmadreza Jahadakbar, Haluk E. Karaca, Mohammad Elahinia

Mechanical Engineering Faculty Publications

Material and mechanical properties of NiTi shape memory alloys strongly depend on the fabrication process parameters and the resulting microstructure. In selective laser melting, the combination of parameters such as laser power, scanning speed, and hatch spacing determine the microstructural defects, grain size and texture. Therefore, processing parameters can be adjusted to tailor the microstructure and mechanical response of the alloy. In this work, NiTi samples were fabricated using Ni_50.8Ti (at.%) powder via SLM PXM by Phenix/3D Systems and the effects of processing parameters were systematically studied. The relationship between the processing parameters and superelastic properties were investigated …

Influence Of Slm On Compressive Response Of Niti Scaffolds, Narges Shayesteh Moghaddam, Soheil Saedi, Amirhesam Amerinatanzi, Ahmadreza Jahadakbar, Sayed Ehsan Saghaian, Haluk E. Karaca, Mohammad Elahinia

Mechanical Engineering Faculty Publications

Porous Nickel-Titanium shape memory alloys (NiTi-SMAs) have attracted much attention in biomedical applications due to their high range of pure elastic deformability (i.e., superelasticity) as well as their bone-level modulus of elasticity (E≈12-20 GPa). In recent years, Selective Laser Melting (SLM) has been used to produce complex NiTi components. The focus of this study is to investigate the superelasticity and compressive properties of SLM NiTi-SMAs. To this aim, several NiTi components with different level of porosities (32- 58%) were fabricated from Ni_50.8Ti (at. %) powder via SLM PXM by Phenix/3D Systems, using optimum processing parameter (Laser power-P=250 W, …

Adaptive Navigation Control Primitives For Multirobot Clusters: Extrema Finding, Contour Following, Ridge/Trench Following, And Saddle Point Station Keeping, Christopher A. Kitts, Robert T. Mcdonald, Michael A. Neumann

Mechanical Engineering

Adaptive navigation is the process of modifying a vehicle's direction or motion path based on measurements taken while moving. When exploring a scalar field, such as the temperature or the concentration level of a pollutant across a region of interest, adaptive navigation may allow the identification of locations of interest-like the maximum temperature or the source of the pollutant-without exhaustively mapping the entire region. Adaptive navigation has been hailed as a powerful capability, and significant work has been performed to explore how such techniques can be used to find the local extreme points and follow contour levels in a field. …

Evaluation Of Resiliency In A Wide-Area Backup Protection System Via Model Checking, Kolby H. Elliot

Theses and Dissertations

Modern civilization relies heavily on having access to reliable power sources. Recent history has shown that present day protection systems are not adequate. Numerous backup protection (BP) systems have been proposed to mitigate the impact of primary protection system failures. Many of these novel BP systems rely on autonomous agents communicating via wide-area networks. These systems are highly complex and their control logic is based on distributed computing. Model checking has been shown to be a powerful tool in analyzing the behavior of distributed systems. In this research the model checker SPIN is used to evaluate the resiliency of an …

Comparison Of Thermal Glove Wrist-Hand Orthoses In Their Effectiveness On Rheumatoid Arthritis, Brittany E. Mott

USF Tampa Graduate Theses and Dissertations

Rheumatoid arthritis (RA) is an autoimmune disease affecting nearly 1% of the world’s population with symptoms such as inflammation, pain, and reduced strength [1]. Physicians and scientists work to develop pharmaceuticals and medical devices aimed at decreasing the symptoms associated with RA to better the lives of those affected. One of the most recent developments is the addition of thermal therapy gloves to the array of upper limb orthoses available to patients with RA. It was hypothesized that this study will show that orthoses in the form of thermal therapy gloves are beneficial to the patients by reducing symptoms such …

Optimal Trajectory Generation In A Dynamic Multi-Body Environment Using A Pseudospectral Method, Jacob A. Dahlke

Theses and Dissertations

High-altitude parking orbits could provide resiliency to the military space infrastructure by providing redundancy in key assets, allowing for rapid reconstitution of underperforming satellites. When analyzing trajectories in a high-altitude regime, two-body models of Keplerian motion become less accurate since the gravitational effects of other bodies are no longer negligible. To provide a higher fidelity model of the dynamics in a high-altitude regime, a multiple-body model can be used. In the Earth-Moon system, a spacecraft operating in the high-altitude regime can be modeled with three-body dynamics. With certain simplifying assumptions, the model is called the circular-restricted three-body problem (CR3BP). The …

Control, Characterization, And Cooling Of An Ultra-Compact Combustor, Kevin J. Demarco

Theses and Dissertations

An Ultra-Compact Combustor (UCC) is novel alternative to axial flow combustors commonly used in gas turbine engines. The UCC offers multiple benefits to engine design. First, the UCC aims to increase the thrust-to-weight ratio of an aircraft gas turbine engine by decreasing the size, and thus weight, of the engine's combustor. This is done by utilizing a Circumferential Cavity (CC) wrapped around the main core flow which hosts the combustion event, allowing a shortened combustor length. Second, within the CC, the combusting mixture is subjected to a high centrifugal loading which aids combustion by improving both flame propagation and residence …

Analytical Determination Of A Helicopter Height Velocity Diagram, Michael J. Harris

Theses and Dissertations

A helicopter height velocity (HV) diagram was analytically constructed using optimal control techniques. A three degree of freedom, point-mass, dynamic model was developed and validated with flight test data. An induced velocity calculation was incorporated which addressed the effects of vortex ring state. The problem was posed as an open final time, constrained initial state, constrained final state problem, with the objective function as a weighted sum of the initial altitude and quadratic controls. This formulation was solved using direct pseudo-spectral collocation and adaptive mesh refinement as implemented by the GPOPS-II® software suite. Proper adjustment of path constraints was crucial …

An Efficient Euler Method To Predict Shock Migration On A Straked Delta Wing Design, Dylan N. Hope

Theses and Dissertations

In support of the Air Force Office of Scientific Research, this project sought to identify the significance of nonlinear aerodynamic phenomena in regards to LCO of a straked delta wing design. Previous works include unsteady Navier-Stokes aeroelastic analysis of various wing designs and flight test of F-16 transonic LCO with interest focused on oscillatory SITES behavior. The research presented within this investigation further expanded the understanding of unsteady aerodynamics by performing aeroelastic analysis of a wing oscillated in pitch with an Euler-based, boundary layer coupled numerical method (ZEUS). The wing was tested for a multitude of LCO parameters such as …

Algorithms For Small Satellite Formation Flying, Robert B. Larue

Theses and Dissertations

This thesis presents algorithms for spacecraft formation flying using impulsive thrust and low-thrust methods. The general circular orbit formation initial conditions are derived in terms of equinoctial elements. Physical significance of the bounded relative motion parameters is presented for the case of general circular orbits. The developed algorithms are posed in terms of equinoctial elements for a singularity-free approach. The algorithms are assessed by numerical propagation of the inertial equations of motion with J2 and drag perturbations. Methods are presented for minimizing the ΔV required for formation initialization. An examination of the performance of open-loop and closed-loop control is provided …

Creep Of Hi-Nicalon™ S Ceramic Fiber Tows At 1000°C In Air And In Silicic Acid-Saturated Steam, Brian G. Kroeger

Theses and Dissertations

Advanced SiC/SiC ceramic matrix composites (CMCs) are being considered for a variety of applications. Of interest is their ability to withstand exposure to high temperature in an aggressive oxidizing environment. The presence of steam creates such an environment. As steam traverses across a SiC/SiC composite and through cracks in the SiC matrix, it becomes saturated with silicic acid, Si(OH)₄. It is essential to understand the long-term impacts and durability of SiC/SiC CMCs that have been exposed to such a demanding environment. The present research investigated creep of Hi-Nicalon™ S SiC fibers at 1000°C in air and in silicic …

The Study And Application Of Carbon Nanotube Film Heaters For Space Applications, Christopher C. Rocker

Theses and Dissertations

The purpose of this research was to examine the feasibility of using Carbon Nanotube (CNT) sheets as thin film heaters for space applications. The ability to maintain the temperature of space components has a direct impact on a space vehicle's operation and longevity. Currently etched foil heaters are used to heat satellite batteries. Battery heaters are the focus of this research. However, as this study will show, they have limitations and are susceptible to failure. CNT sheets have many beneficial properties and show potential in replacing the etched foil design. In this study test specimens were created by forming laminate …

Defender-Assisted Evasion And Pursuit Maneuvers, Roger S. Anderson

Theses and Dissertations

Motivated by the possibilities afforded by active target defense, a 3-agent pursuit-evasion differential game involving an Attacker/Pursuer, a Target/Evader, and a Defender is considered. The Defender strives to assist the Target by intercepting the Attacker before the latter reaches the Target. A barrier surface in a reduced state space separates the winning regions of the Attacker and Target-Defender team. In this thesis, attention focuses primarily on the Attacker's region of win where, under optimal Attacker play, the Defender cannot preclude the Attacker from capturing the Target. Both optimal and suboptimal strategies are investigated. This thesis uses several methods to breakdown …

Variable Speed Simulation For Accelerated Industrial Control System Cyber Training, Luke M. Bradford

Theses and Dissertations

It is important for industrial control system operators to receive quality training to defend against cyber attacks. Hands-on training exercises with real-world control systems allow operators to learn various defensive techniques and see the real-world impact of changes made to a control system. Cyber attacks and operator actions can have unforeseen effects that take a significant amount of time to manifest and potentially cause physical harm to the system, making high-fidelity training exercises time-consuming and costly. This thesis presents a method for accelerating training exercises by simulating and predicting the effects of a cyber event on a partially-simulated control system. …

An Analysis Of Multi-Domain Command And Control And The Development Of Software Solutions Through Devops Toolsets And Practices, Mason R. Bruza

Theses and Dissertations

Multi-Domain Command and Control (MDC2) is the exercise of command and control over forces in multiple operational domains (namely air, land, sea, space, and cyberspace) in order to produce synergistic effects in the battlespace, and enhancing this capability has become a major focus area for the United States Air Force (USAF). In order to meet demands for MDC2 software, solutions need to be acquired and/or developed in a timely manner, information technology infrastructure needs to be adaptable to new software requirements, and user feedback needs to drive iterative updates to fielded software. In commercial organizations, agile software development methodologies and …