Engineering Commons^™

Phasor Measurement Unit Testing And Characterization, Joe Perigo

Graduate Theses & Non-Theses

The power grid is a complex system composed of many different elements. Knowledge of electrical waveform content across the grid is key to managing power and maintaining stability. Electrical waveforms can be represented mathematically as time-varying phasors. Electrical phasors give information pertaining to the magnitude of the waveform as well as the phase relationship of the waveform to a reference. A Phasor Measurement Unit (PMU) is a device that is installed at a node on the power grid and measures electrical phasors. The potential of near real time phasor information is powerful and has driven PMU application technology forward at …

Uav-Based Geotechnical Modeling And Mapping Of An Inaccessible Underground Site, Elizabeth Anne Russell

Graduate Theses & Non-Theses

Digital photogrammetry is becoming a more common method used for mapping geological and structural rock mass features in underground mining. The issue of capturing geological and structural data in inaccessible, unsupported areas of mines remains even when utilizing terrestrial photogrammetric methods; thus, geotechnical models of mines are left with incomplete datasets. Large unsupported underground voids, like stopes, have the potential to cause major failures, but by filling in the geotechnical data gaps in inaccessible areas, potential failures can be predicted through kinematic analysis of the area’s mapped discontinuities. Implementation of Unmanned Aerial Vehicles (UAVs) in underground mines and recent advances …

High Fidelity Kinetic Model For Flotation: Applications To Rare Earth Elements And Copper/Molybdenum Separations, Richard Ladouceur

Graduate Theses & Non-Theses

A high-fidelity kinetic model was developed to identify and elucidate the effects of varying principle froth flotation parameters on the sub-processes that occur within and between the flotation zones. Whereas traditional models fail to adequately address froth recovery and recovery by entrainment, the high-fidelity model defines these phenomena based on an improved understanding of the pulp/froth interface. Solution chemistry considerations that govern rare earth mineral separation by flotation were identified, characterized, and optimized. Application of novel surfactants such H205 and salicylhydroxamic acid (collectors) and dimethyl glycol monobutyl ether (depressant) was evaluated to define optimal flotation conditions. The effect of pressure …

Investigations Of Solid-State Sintering Behavior Of Binary Refractory Metal Oxide Systems, Maureen Chorney

Graduate Theses & Non-Theses

Refractory metals are commonly alloyed for improved corrosion resistance, thermal stability, and strength. In service, these alloys form highly stable oxides under mildly oxidizing conditions at relatively low temperatures. In order to recycle these materials, high temperature electrochemical processing is required to reduce the refractory metal oxides. To abet experimental evaluation of the electrochemical reduction process under development at the Idaho National Laboratory, binary mixtures of selected refractory metal oxide powders were sintered to produce cathode pellets, which could be suspended in the molten salt electrolyte during reduction experiments. Preparatory literature review revealed a paucity of published information relative to …

Week 4 Lab: Counterlist, Michelle Shu, David Soon, Nyc Tech-In-Residence Corps

Open Educational Resources

Syllabus and materials for the course "CSC 59940: Front-End Web Application Development" delivered at the City College of New York in Spring 2018 by Michelle Shu and David Moon as part of the Tech-in-Residence Corps program.

Autonomous Vehicle, Matyas Gyimesi, Keith Beier, Chris Brunton, Nick Frederick, Aaron Martindale

Research Horizons Day Posters

No abstract provided.

An Evaluation Of Induction Heating In Healthcare Food Industry, Barrett Alexander Hampton

Masters Theses & Specialist Projects

This thesis addresses the problem healthcare facilities are having in maintaining proper food temperatures while transporting meals to patients after food has left the kitchen area. Induction heat has been a known method for generating heat for many years. The commercial food industry currently uses this technology, which is beginning to appear in the residential sector as well because of developments made by manufacturers. This study focuses on the top commercial brand models of induction heaters and the supporting materials currently used to create heat sources to maintain food temperatures in hospitals and long term care facilities.

The research in …

Application Of Huffman Data Compression Algorithm In Hashing Computation, Lakshmi Narasimha Devulapalli Venkata,

Masters Theses & Specialist Projects

Cryptography is the art of protecting information by encrypting the original message into an unreadable format. A cryptographic hash function is a hash function which takes an arbitrary length of the text message as input and converts that text into a fixed length of encrypted characters which is infeasible to invert. The values returned by the hash function are called as the message digest or simply hash values. Because of its versatility, hash functions are used in many applications such as message authentication, digital signatures, and password hashing [Thomsen and Knudsen, 2005].

The purpose of this study is to apply …

Failure Analysis Of Philos Plate Construct Used For Pantalar Arthrodesis Paper Ii-Screws And Fem Simulations, Farah Hamandi, Richard T. Laughlin, Tarun Goswami

Biomedical, Industrial & Human Factors Engineering Faculty Publications

A fractured stainless steel 3.5 mm proximal humerus internal locking system (PHILOS) plate and screws were investigated in this paper. This plate was used for ankle arthrodesis of a 68-year-old female with a right ankle deformity. Both the plate and screws were considered in this investigation. Optical and scanning electron microscopes (SEM) were used to document fracture surface characteristics, such as extensive scratching, plastic deformation, rubbed surfaces, discoloration, and pitting, along with cleavage, secondary cracking, deposits of debris, striations, and dimples. Indications of these features show that the plate failed by corrosion fatigue, however, overloading separated the screw(s) in two …

Developing Knowledge Management Strategies, Bryan Gibson, Candice Y. Wallace, Steven Douglas Kreis

Kentucky Transportation Center Research Report

Retirements and other staff changes have led to a loss of institutional knowledge across public agencies. These changing workforce dynamics have highlighted the study of knowledge management, and how organizations can best retain their core knowledge bases. Key to understanding knowledge management is how organizations have approached the issue and the most effective methods and processes they have used to retain, store, and disseminate knowledge. Part of the knowledge management discussion includes core competencies, or what basic knowledge and skills are essential to an organization’s mission. Also, considering the impacts of outsourcing on public employment, is another key to understanding …

A Straightforward Updating Criterion For 2-D/3-D Hybrid Discontinuous Galerkin Time-Domain Method Controlling Comparative Error, Wending Mai, Ping Li, C. G. Li, Ming Jiang, Wenqu Hao, Lijun Jiang, Jun Hu

Electrical and Computer Engineering Faculty Research & Creative Works

The 2-D/3-D hybrid discontinuous Galerkin time-domain (DGTD) method is efficient to deal with structures that contain elements capable of 2-D simplification. To separate 2-D elements from 3-D ones, a criterion for approximation error manipulation is required. However, in the latest reported technique, this kind of criterion is derived from the causality principle and the Courant-Freidrichs-Lewy constraint, and thus is indirect and inessential to 2-D simplification. As a result, some elements capable of 2-D simplification are unnecessarily flagged as 3-D ones, deteriorating efficiency dramatically. Moreover, controlling absolute error, the traditional criterion is not flexible for structures with complex mode distribution. In …

Study On The Effect Of Iron-Based Deoxidizing Inhibitors For Coal Spontaneous Combustion Prevention, Chaoyu Hao, Yanling Chen, Jiren Wang, Cunbao Deng, Guang Xu, Fengwei Dai, Rui Si, Hongfei Wang, Haoyu Wang

Mining Engineering Faculty Research & Creative Works

To improve the prevention of spontaneous coal combustion, reduced iron powder and other ingredients should be added together to form an iron-based deoxidizing inhibitor, with the dual effect of oxygen consumption and inhibition. The oxygen consumption rate of the inhibitor was studied through experiments. According to the theory of coordination resistance, the coordination resistance of Fe³⁺ was studied via the density functional method. Subsequently, a comparative experiment of the effects on spontaneous coal combustion was conducted. The research shows that several kinds of common resistance agents that are added to the reduced iron powder can consume oxygen. However, the …

Review Of The Methods For Determination Of Reactive Oxygen Species And Suggestion For Their Application In Advanced Oxidation Induced By Dielectric Barrier Discharges, Emile S. Massima Mouele, Olanrewaju Ojo Fatoba, Omotola Babajide, Kassim O. Badmus, Leslie F. Petrik

Mining Engineering Faculty Research & Creative Works

Advanced oxidation processes (AOPs) particularly non-thermal plasmas based on electrical discharges have been widely investigated for water and wastewater treatment. Dielectric barrier discharges (DBDs) generate large amounts of selective and non-selective reactive oxygen species (ROS) such as ozone, hydrogen peroxide, atomic oxygen, superoxide molecular anions and hydroxyl radicals, having been proved to be efficient for water decontamination among various forms of electrical discharge systems. The detection and quantification methods of these oxygen species in non-thermal plasmas have been reviewed. However, their application in dielectric barrier discharge has not been well studied. It is therefore imperative to summarize the various detection …

Development Of A Novel Bioactive Glass Suitable For Osteosarcoma-Related Bone Grafts, Alireza Rahimnejad Yazdi, Lawrence Torkan, Stephen D. Waldman, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

In this study, zinc borate-based glasses with increasing gallium content (0, 2.5, 5, 10, and 15 wt % Ga) were synthesized and their effect on the viability and proliferation of preosteoblasts and osteosarcoma cancer cells were investigated. Methyl thiazolyl tetrazolium (MTT) cell viability assays using glass degradation extracts revealed that the extracts from glasses with lower Ga contents could enhance the viability of preosteoblasts, while extracts from the glass composition with 15 wt % Ga caused statistically significant reduction of their viability. MTT cell viability assays using the extracts and osteosarcoma cells showed that only extracts from the glass composition …

The Effect Of Incorporating Different Concentrations Of Chlorhexidine Digluconate On The Degree Of Conversion Of An Experimental Adhesive Resin, Lamiaa Mahmoud Moharam, Haidy Nabil Salem, Hanaa Mahmoud Elgamily

Chemical and Biochemical Engineering Faculty Research & Creative Works

Background: The aim of this study was to evaluate the effect of chlorhexidine digluconate incorporation on the degree of conversion of an experimental adhesive resin. Material and methods: The experimental resin was prepared from 70 wt.% bisphenol A glycerolate dimethacrylate, 30 wt.% hydroxyethyl methacrylate, silanized SiO₂ nanofillers, 0.5% of camphorquinone and ethyl 4-dimethylaminebenzoate (binary photo-initiator system). Five chlorhexidine digluconate concentrations (0, 0.5, 1, 2 and 4 wt%) were then incorporated into the experimental resin. Thirty Potassium Bromide pellets were prepared then divided into six groups (n=5/group), representing the tested adhesive resins (Single Bond 2, 0, 0.5, 1, 2 and …

Additive Manufacturing Of Transparent Fused Quartz, Junjie Luo, John M. Hostetler, Luke Gilbert, Jonathan T. Goldstein, Augustine M. Urbas, Douglas A. Bristow, Robert G. Landers, Edward C. Kinzel

Mechanical and Aerospace Engineering Faculty Research & Creative Works

This paper investigates a filament-fed process for additive manufacturing (AM) of fused quartz. Glasses such as fused quartz have significant scientific and engineering applications, which include optics, communications, electronics, and hermetic seals. AM has several attractive benefits such as increased design freedom, faster prototyping, and lower processing costs for small production volumes. However, current research into glass AM has focused primarily on nonoptical applications. Fused quartz is studied here because of its desirability for use in high-quality optics due to its high transmissivity and thermal stability. Fused quartz filaments are fed into a CO₂ laser-generated molten region, smoothly depositing …

Direct Metal Laser-Sintered Stainless Steel: Comparison Of Microstructure And Hardness Between Different Planes, M. Ghasri-Khouzani, H. Peng, R. Attardo, P. Ostiguy, J. Neidig, R. Billo, D. Hoelzle, M. R. Shankar

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Microstructural analysis and micro-hardness measurements were performed on different planes of 316L stainless steel fabricated by direct metal laser sintering (DMLS) technique. A fine cellular network was observed within the steel microstructure, where morphology of most cells changed from columnar on XZ-plane (vertical section) to equiaxed on XY-plane (horizontal section). Correspondingly, morphology of most grains was found to alter from columnar for the XZ-plane to equiaxed in the case of the XY-plane. Moreover, X-ray diffraction (XRD) analysis revealed a fully austenitic structure for both the planes. The average micro-hardness value for the XZ-plane and XY-plane was insignificantly (≈ 3%) different, …

Implementing An Ore Reconciliation System Supported By Statistical Process Control, Bryan Nielson

Graduate Theses & Non-Theses

There are several stages within mine planning that utilize different block models to help predict future values. Ore reconciliation manages the variance observed between the forecasted values from these block models and actual production data. This paper primarily focuses on an ore reconciliation system that was developed for an open pit copper operation located in the Western United States. A monthly reconciliation approach has been setup in a stepwise format along the mine value chain. Mine call factors are calculated each month for each step within the operation’s mining process to measure the variance between predicted values and production data. …

Optimal Mixed Tracking/Impedance Control With Application To Transfemoral Prostheses With Energy Regeneration, Gholamreza Khademi, Hanieh Mohammadi, Hanz Richter, Daniel J. Simon

Mechanical Engineering Faculty Publications

We design an optimal passivitybased tracking/impedance control system for a robotic manipulator with energy regenerative electronics, where the manipulator has both actively and semi-actively controlled joints. The semi-active joints are driven by a regenerative actuator that includes an energy-storing element. Method: External forces can have a large influence on energy regeneration characteristics. Impedance control is used to impose a desired relationship between external forces and deviation from reference trajectories. Multi-objective optimization (MOO) is used to obtain optimal impedance parameters and control gains to compromise between the two conflicting objectives of trajectory tracking and energy regeneration. We solve the MOO problem …

Rotordynamic Analysis Of Theoretical Models And Experimental Systems, Cameron R. Naugle

Master's Theses

This thesis is intended to provide fundamental information for the construction and

analysis of rotordynamic theoretical models, and their comparison the experimental

systems. Finite Element Method (FEM) is used to construct models using Timoshenko

beam elements with viscous and hysteretic internal damping. Eigenvalues

and eigenvectors of state space equations are used to perform stability analysis, produce

critical speed maps, and visualize mode shapes. Frequency domain analysis

of theoretical models is used to provide Bode diagrams and in experimental data

full spectrum cascade plots. Experimental and theoretical model analyses are used

to optimize the control algorithm for an Active Magnetic Bearing …

Modeling And Analysis Of Cal Poly Microgrid, Matthew A. Guevara

Master's Theses

Microgrids—miniature versions of the electrical grid are becoming increasingly more popular as advancements in technologies, renewable energy mandates, and decreased costs drive communities to adopt them. The modern microgrid has capabilities of generating, distributing, and regulating the flow of electricity, capable of operating in both grid-connected and islanded (disconnected) conditions. This paper utilizes ETAP software in the analysis, simulation, and development of the Cal Poly microgrid. Additionally, an ETAP power system protection tutorial is created to aid students entering the power industry. Microprocessor-based relays are heavily utilized in both the ETAP model and hardware implementation of the system. Case studies …

Near-Optimal Control Of Switched Systems With Continuous-Time Dynamics Using Approximate Dynamic Programming, Tohid Sardarmehni

Mechanical Engineering Research Theses and Dissertations

Optimal control is a control method which provides inputs that minimize a performance index subject to state or input constraints [58]. The existing solutions for finding the exact optimal control solution such as Pontryagin’s minimum principle and dynamic programming suffer from curse of dimensionality in high order dynamical systems. One remedy for this problem is finding near optimal solution instead of the exact optimal solution to avoid curse of dimensionality [31]. A method for finding the approximate optimal solution is through Approximate Dynamic Programming (ADP) methods which are discussed in the subsequent chapters.

In this dissertation, optimal switching in switched …

Effects Of The Tempering And High-Pressure Torsion Temperatures Onmicrostructure Of Ferritic/Martensitic Steel Grade 91, Artur Ganeev, Marina Nikitina, Vil Sitdikov, Rinat Islamgaliev, Andrew Hoffman, Haiming Wen

Materials Science and Engineering Faculty Research & Creative Works

Grade 91 (9Cr-1Mo) steel was subjected to various heat treatments and then to high-pressure torsion (HPT) at different temperatures. Its microstructure was studied using transmission electron microscopy (TEM) and X-ray diffraction (XRD). Effects of the tempering temperature and the HPT temperature on the microstructural features and microhardness in the ultrafine-grained (UFG) Grade 91 steel were researched. The study of the UFG structure formation takes into account two different microstructures observed: before HPT in both samples containing martensite and in fully ferritic samples.

A Cost Effective Direct Writing Laser System For Rapid Prototyping Of Microfluidic Devices, Mohammed Ziauddin

Mechanical Engineering Theses

This study is conducted to highlight the improvement in technology of manufacturing microstructures using maskless lithography technique. Direct laser writing technique was implemented, and a major section of this study is carried out on an experimental slant. Variables that were not covered experimentally were studied using lithography simulation software, GenISys – LAB. The aim of this study is to fabricate and analyze cost effective maskless lithography apparatus to ensure rapid prototyping and optimize the system to be used for at least two negative photoresist materials. A parametric study was carried out determining the best operating conditions from both perspectives of …

Artificial Intelligence Approach For Classroom Scheduling, Farah M. T. Aiash

Mechanical Engineering Theses

Companies, factories, and academic institutes often rely on planning and controlling scheduling of production lines or classrooms to ensure efficient utilization of resources. Task scheduling is a complex nonlinear process, due to numerous constraints, parameters and frequent, sudden changes in the requirements. The aim of this project is to explore the utilization of artificial intelligent neural networks in the preparation of classroom scheduling by utilizing their adaptive attributes and learning ability to establish a procedure for classroom timetable preparation. A set of input vectors comprising five constraints are introduced to a Self-Organizing Feature Map (SOM) neural network for classroom sections …

Redefining Commercial Vehicle Permitting And Credentialing Violations, Andrew Martin, Jennifer R. Walton, Valerie J. Keathley

Kentucky Transportation Center Research Report

The objective of this study was to analyze enforcement and adjudication of common commercial vehicle tax, credentialing, and safety offenses. This study examined violations of the International Fuel Tax Agreement and the Kentucky Intrastate Tax, Kentucky’s weight distance tax, Unified Carrier Registration, Kentucky size and weight laws, and federal safety regulations from 2004 to 2013. Statistical analysis showed declining conviction rates, increasing dismissal rates, and a drop in collections of court costs and fines associated with these offenses. In addition, adjudication varied significantly from district court to district court, which is creating an equity issue for motor carriers and the …

Longer Lasting Bridge Deck Overlays, David Q. Hunsucker, Kean H. Ashurst Jr., Brad W. Rister, David L. Allen, Eileen Grady

Kentucky Transportation Center Research Report

The objective of this report is to determine the most effective method for bridge deck overlay construction and repair by assessing current practices; examining new products and technologies; and reviewing NCHRP (National Cooperative Highway Research Program) guidelines, state standard specifications, ASCE (American Society of Civil Engineers) infrastructure ratings, and original bridge core chloride penetration data. Based on the review, this report offers the following conclusions. Latex modified concrete (LMC) overlays perform well, provide a long service life, and are the most commonly used method of bridge deck rehabilitation. Ohio considers microsilica concrete (MSC) overlays as state of the art due …

Ultra Efficient Commercial Transport Challenge- Nasa Design Challenge- X-Jab-Ect, Ramin Abdul, Jacob Beiting, Evan Johnston

Senior Design Project For Engineers

Today’s aircraft require new innovation to be able to produce the same amount of lift, but with the design decrease the amount of drag produced. The X-JAC ECT has the ability and is an innovative airframe to reduce today’s fuel costs. The baseline comparison for the X-JAB is the Boeing 747-400 aircraft, the payload, range, speed, and altitude are the same f or the X-JAB and the 747. Through use of supercritical airfoils, the X-JAB was designed as a blended wing body aircraft to produce more lift while evenly balancing the weight of the aircraft and the payload. Through parametric …

Development Of A Thiol-Acrylate-Based Hydrogel For Tumor Spheroid Generation In A Microfluidic Device, Wayne Joseph Wortmann Iii

Honors Capstones

No abstract provided.

Ocean And Ice Shelf Tides From Cryosat-2 Altimetry, Edward Zaron

Civil and Environmental Engineering Faculty Publications and Presentations

A new empirical model of ocean tides has been developed for the Weddell Sea, south of 668S, between 908W and 08, using six years of radar altimeter data from the CryoSat-2 satellite mission. Because of its long groundtrack repeat period (368 days) and its diverse measurement modes, low-rate mode (LRM) over the ocean and synthetic aperture radar interferometric mode (SARin) over ice surfaces and parts of the ocean, the CryoSat2 data pose a number of challenges for tidal analysis. The space and time sampling properties of the exact repeat, near-repeat, and crossover ground tracks have been analyzed to discover which …