Engineering Commons^™

Nanoparticle Penetration Of Respirator Masks At Construction Sites, Jefferson W. Doehling

Honors College Theses

This experimental investigation studies the effectiveness of N95 respirators at blocking particles between 11.5 and 154 nm in diameter during 4 different construction activities. It is well known that large amounts of dust and debris are generated during construction activities. New research has found that significantly more nanoparticles are generated during construction activities than previously thought. Consequently, the N95 respirators commonly worn to protect against these particles are only rated to block 95% particles larger than 0.3 microns in size. In this investigation, two respirator models were tested, a NIOSH TC-84A-0007 pleated N95 respirator and a NIOSH 42CFR84 foldable N95 …

Exploring The Use Of 3d Scanning To Determine Whole-Body Volume While Wearing A Triathlon Wetsuit, Leland Barker, Diego Medoza, John A. Mercer

Kinesiology and Nutrition Sciences Faculty Research

Background: Commercial 3 Dimension (3D) scanners are relatively new to anthropometry. The purpose of this study was to explore ability of using a 3D imaging instrument to measure body volume with and without wearing a wetsuit. Three experiments were conducted to achieve this purpose: (1) to determine if the 3D imaging instrument could accurately measure volume of static objects; (2) to determine the resolution of accuracy of measuring volume of static objects; and (3) to compare whole-body volume of wearing a wetsuit using 3D imaging as well as another body volume measure (air displacement technique). Methods: Three experiments were performed: …

Reducing Stress In 3d Printed Parts Made With Laser Engineered Net Shaping, Shaun Ross Whetten

Mechanical Engineering ETDs

Thermal cycling and repeated melting/solidification cycles characteristic of 3D metal printing processes causes buildup of residual stress in 3D printed parts. Using laser engineered net shaping (LENS®), residual stresses are formed leading to deformation and possible cracking of the 3D printed metal components. The LENS process offers opportunities for rapid prototyping, alternative manufacturing processes, and repair of worn/broken components so it is important to be able to minimize the effects of residual stress. Work was performed to understand the benefit of substrate heating on reducing residual stress in metal parts made using the LENS process. Substrate deformation, and destructive methods …

Assessing The Power Of Remotely-Sensed Snow Cover Extent To Improve Understanding Of Snowpack-Streamflow Dynamics: An Application Of Modis Snow Cover In Western U.S. Mountain Watersheds, Jennifer N. Van Osdel

Civil Engineering ETDs

Mountain snowpacks provide essential water for socio-economic systems around the world, with nearly two billion people living in snow sensitive regions. Therefore, methods for characterizing the snowpack-streamflow dynamics at the watershed level are essential for understanding how changes in temperature and precipitation due to climate change will affect the water supply in these regions. However, in-situ snowpack measurements, such as snow water equivalent (SWE), are often unavailable or insufficient due to the financial and logistical constraints of installing snowpack monitoring systems. Remotely-sensed snow cover extent (SCE), or the proportion of a watershed that is covered in snow, has been previously …

From Flasks To Applications: Design And Optimization Of Giant Quantum Dots Using Traditional And Automated Synthetic Methods, Christina J. Hanson

Nanoscience and Microsystems ETDs

Semiconducting nanocrystals, also known as quantum dots (QDs), that emit light with near-unity quantum yield and are extremely photostable are attractive options as down-conversion and direct electricity-to-light materials for a variety of applications including solid-state lighting, display technologies, bio-imaging and optical tracking. Standard QDs with a core/thin shell structure display fluorescence intermittency (blinking) and photobleaching when exposed to prolonged room temperature excitation for single dot measurements, as well as significant reabsorption and energy transfer when densely packed into polymers or at high solution concentrations.

We have developed thick shell “giant” QDs (gQDs), ultra-stable photon sources both at the ensemble and …

Spectral Analysis Of Surface Waves To Detect Subsurface Voids, Payman Hajiani, Neil Lennart Anderson, J. David Rogers

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Systems and methods for detecting a subsurface cavity. A source applies a force to ground under inspection and a plurality of sensors coupled to the ground detect resulting surface waves. A processor is configured to extract phase and frequency components of the acquired seismic data, identify a phase shift in surface waves in the ground under inspection based on the extracted phase and frequency components, and determine one or more physical characteristics of a subsurface cavity based on the identified phase shift

Method For Data - Driven Learning - Based Control Of Hvac Systems Using High - Dimensional Sensory Observations, Amir-Massoud Farahmand, Saleh Nabi, Piyush Grover, Daniel Nikolaev Nikovski

Department of Mechanical and Materials Engineering: Faculty Publications

A controller for controlling an operation of an air - conditioning system conditioning an indoor space includes a data input to receive state data of the space at multiple points in the space , a memory to store a code of a reinforcement learning algorithm and a history of the state data and a history of control commands having been applied to the air - conditioning system , wherein the history of the control commands is associated with the state data and history of rewards , a processor coupled to the memory determines a value function outputting a cumulative value …

Assessing Seasonal Flow Dynamics At A Lagoon Saltwater–Freshwater Interface Using A Dual Tracer Approach, S. Müller, S. Jessen, C. Duque, É. Sebök, Bethany T. Neilson, P. Engesgaard

Civil and Environmental Engineering Faculty Publications

Study region: Eastern shore of Ringkøbing Fjord, a coastal lagoon at the west coast of Denmark

Study focus: A dual tracer approach based on salinity and δ¹⁸O is used to assess seasonal dynamics at the saltwater-freshwater interface of a coastal lagoon. At the site, salinity is prone to vary on a sub-seasonal or daily frequency due to riverine freshwater inputs to the lagoon. In contrast, δ¹⁸O compositions of end-members only vary seasonally.

New hydrological insights: The dual tracer approach shows to be valuable in coastal settings where end-member concentrations vary substantially over the seasons and hence, …

1974 - Geology Of The Southern Salinas Valley Area, California

State and Federal Documents Relating to Monterey and San Luis Obispo Counties

This 1974 report about the geology of the southern Salinas Valley was concerned mainly with relating the occurrence of petroleum and other mineral commodities to the Cenozoic history of the area. The investigation had two phases. First phase involved detailed geologic mapping of quadrangles that cover most of Tertiary beds west of the Salinas River. Second phase included a reconnaissance geologic mapping to extend the results of the first phase to a larger area. The report summarizes results of the geologic investigation of the entire southern Salinas Valley area.

Experimental Testing Of A Metamaterial Slow Wave Structure For High-Power Microwave Generation, Kevin Aaron Shipman

Electrical and Computer Engineering ETDs

Experimental Testing of a Metamaterial Slow Wave Structure for High-Power Microwave Generation

by

Kevin Aaron Shipman

B.S., Exercise Science, University of New Mexico, 2008

A.S., Mathematics, San Juan College, 2014

M.S., Electrical Engineering, University of New Mexico, 2018

Abstract

A high-power L-band microwave source has been developed using a metamaterial (MTM) to produce a biperiodic double negative slow wave structure (SWS) for interaction with an electron beam. The beam is generated by a ~700 kV, ~6 kA short pulse (~ 10 ns) electron beam accelerator. The design of the metamaterial SWS (MSWS) consists of a cylindrical waveguide, loaded with alternating …

An Analysis Of The Relationship Between Leadership Style And Lean Expressed Through Respect, Proactivity, And Innovative Work Behavior, Reiner Martens

Organization, Information and Learning Sciences ETDs

This dissertation is based on the idea that a leadership style is necessary to implement a lean culture within an organization. This research study employed a systematic literature review, from which a lean leadership model was developed. Based on the two principles of a lean organizational culture, 1. respect for people and 2. continuous improvement, three measurable variables were identified, respect, proactivity, and innovative work behavior. These three variables were connected to the lean leadership model. Leadership styles based on the full range model of leadership were used as independent variable(s). The overarching results of this study were: (1) transformational …

1978 - Water Resources Investigations - Two-Dimensional And Three-Dimensional Digital Flow Models Of The Salinas Valley Ground-Water Basin, Report 78-113

State and Federal Documents Relating to Monterey and San Luis Obispo Counties

This 1978 report discussed a group of hydrologic models that were developed for the Salinas Valley that included the small-stream model, river model, two -dimensional ground-water model, and three dimensional ground-water model. The small-stream model simulated ground-water recharge from small streams that were tributary to the Salinas River. The river model simulated ground-water recharge from and surface-water discharge in the Salinas River. The two-dimensional and three-dimensional ground-water models simulated hydraulic head in the ground-water basin. The report noted that in addition to being an important agricultural area, Salinas Valley contained several growing urban areas that obtained water from the ground …

1994 - Managing Water For Drought, U.S. Army Corps Of Engineers And Institute For Water Resources

Miscellaneous Federal Documents & Reports

The purpose of the report was to explain the procedure for cooperative federal-state drought preparedness studies, to indicate how the studies related to the longstanding principles and guidance for federal water resources investigations, and to indicate the means of implementing conclusions arrived at in any given region. This 1994 report, developed during a four-year National Study of Water Management, summarizes the method of improving water management during drought. The method was tested and refined in four field studies in different parts of the country, in which teams of water managers and users worked together to reduce drought impacts. In each …

Nanostructured Materials Derived From Metal-Organic Frameworks For Energy And Environmental Applications, Zhiqiang Xie

LSU Doctoral Dissertations

Nowadays, energy and environmental issues have become the top priority among a series of global issues. Fossil fuels as the dominant source are depleted fast and usually lead to some environmental problems. Heavy metal pollution has posed a severe threat to environment and public health. Metal-organic frameworks (MOFs), as a very promising category of porous materials, have attracted more and more interest in research communities due to their extremely high surface areas, diverse nanostructures and unique properties. To meet the ever-increasing energy demand and tackle the heavy metal pollution in water, MOFs can function as ideal templates to prepare various …

Modeling And Visualization Of Uncertainty-Aware Geometries Using Multi-Variate Normal Distributions, Christina Gillman, Thomas Wischgoll, Bernd Hamann, James Ahrens

Computer Science and Engineering Faculty Publications

Many applications are dealing with geometric data that are affected by uncertainty. It is important to analyze, visualize, and understand the properties of uncertain geometry. We present a methodology to model uncertain geometry based on multi-variate normal distributions. In addition, we propose a visualization technique to represent a hull for uncertain geometry capturing a user-defined percentage of the underlying uncertain geometry. To show the effectiveness of our approach, we have modeled and visualized uncertain datasets from different applications.

Uncertainty In Optical Particulate Counting Sensors, Jared Todd Blanchard

Undergraduate Honors Theses

To mitigate the health problems and environmental damage caused by the burning of biomass in homes across the developing world, there is an international effort to design clean burning cookstoves that burn with greater efficiency and emit fewer harmful substances. An important tool for gauging the effectiveness of these alternate stoves is the optical particulate counting (OPC) sensor, which comes in many varieties. To facilitate comparison between measurements from different models, a mathematical model and uncertainty analysis method for OPC’s have been developed. These may be applied to any light-scattering OPC. In addition, a low-cost physical system was developed to …

Design Optimization For A Cnc Machine, Alin Resiga

Dissertations and Theses

Minimizing cost and optimization of nonlinear problems are important for industries in order to be competitive. The need of optimization strategies provides significant benefits for companies when providing quotes for products. Accurate and easily attained estimates allow for less waste, tighter tolerances, and better productivity. The Nelder-Mead Simplex method with exterior penalty functions was employed to solve optimum machining parameters. Two case studies were presented for optimizing cost and time for a multiple tools scenario. In this study, the optimum machining parameters for milling operations were investigated. Cutting speed and feed rate are considered as the most impactful design variables …

Scalable Patterning Using Laser-Induced Shock Waves, Saidjafarzoda Ilhom, Khomidkhodza Kholikov, Peizhen Li, Claire Ottman, Dylan Sanford, Zachary Thomas, Omer San, Haluk E. Karaca, Ali O. Er

Mechanical Engineering Faculty Publications

An advanced direct imprinting method with low cost, quick, and minimal environmental impact to create a thermally controllable surface pattern using the laser pulses is reported. Patterned microindents were generated on Ni₅₀Ti₅₀ shape memory alloys and aluminum using an Nd: YAG laser operating at 1064 nm combined with a suitable transparent overlay, a sacrificial layer of graphite, and copper grid. Laser pulses at different energy densities, which generate pressure pulses up to a few GPa on the surface, were focused through the confinement medium, ablating the copper grid to create plasma and transferring the grid pattern onto …

Systematic Design And Experimental Demonstration Of Bianisotropic Metasurfaces For Scattering-Free Manipulation Of Acoustic Wavefronts., Junfei Li, Chen Shen, Ana Díaz-Rubio, Sergei A Tretyakov, Steven A Cummer

Henry M. Rowan College of Engineering Departmental Research

Recent advances in gradient metasurfaces have shown that by locally controlling the bianisotropic response of the cells one can ensure full control of refraction, that is, arbitrarily redirect the waves without scattering into unwanted directions. In this work, we propose and experimentally verify the use of an acoustic cell architecture that provides enough degrees of freedom to fully control the bianisotropic response and minimizes the losses. The versatility of the approach is shown through the design of three refractive metasurfaces capable of redirecting a normally incident plane wave to 60°, 70°, and 80° on transmission. The efficiency of the bianisotropic …

Airline Quality Rating 2018, Brent D. Bowen, Dean E. Headley

Airline Quality Rating Report

The results of the 28th annual national Airline Quality Rating (AQR). The most comprehensive study of the performance quality of the 12 largest airlines in the United States, the AQR is conducted by researchers at the W. Frank Barton School of Business at Wichita State University and Embry-Riddle Aeronautical University’s Prescott, Ariz., campus. Airline performance, as presented by AQR researchers, encompasses a multifactor look at the overall quality of the airlines. It includes on-time performance, denied boardings, mishandled baggage and customer complaints. AQR is the longest running and most established measure of airline quality. AQR researchers use a combination of …

Multi-Objective Resource Provisioning In Network Function Virtualization Infrastructures, Diogo Oliveira

USF Tampa Graduate Theses and Dissertations

Network function virtualization (NFV) and software-dened networking (SDN) are two recent networking paradigms that strive to increase manageability, scalability, pro- grammability and dynamism. The former decouples network functions and hosting devices, while the latter decouples the data and control planes. As more and more service providers adopt these new paradigms, there is a growing need to address multi-failure conditions, particularly those arising from large-scale disaster events. Overall, addressing the virtual network function (VNF) placement and routing problem is crucial to deploy NFV surviv- ability. In particular, many studies have inspected non-survivable VNF provisioning, however no known work have proposed survivable/resilient …

Patient Specific Radiation Doses From Projection Radiography Images: Improving The Accuracy Of Low Dose Radiation Calculations, Daniel J. Sandoval

Nuclear Engineering ETDs

Due to an increase in regulatory scrutiny and medical facility accreditation requirements to monitor patient radiation dose from diagnostic imaging procedures, there is a growing necessity to determine and record accurate patient radiation dose from diagnostic medical imaging procedures. Current methods of patient dosimetry in diagnostic imaging are both extremely difficult and time consuming, require large computing resources (such as Monte Carlo computations), or lack accuracy due to using data based on homogeneous materials and “standard-man sized” anthropomorphic models.

This dissertation provides an algorithm that calculates a more accurate dose using patient-specific projection radiographic images. The algorithm includes measurements acquired …

An Exploration Of The Optical Detection Of Ionizing Radiation Utilizing Modern Optics Technology, Sean D. Fournier, Adam Hecht, Cassiano De Oliveira, Jeffrey B. Martin, Richard K. Harrison, Charles Potter

Nuclear Engineering ETDs

Modern ultraviolet (UV) cameras, when combined with UV-transmitting lenses/filter arrangements, can be used to detect radiation dose in air. Ionizing radiation excites nitrogen molecules in ambient air, the resulting decay includes weak emission of ultraviolet photons. Previous work has proven this phenomenon is detectable using highly-sensitive electronically cooled cameras traditionally used in astronomy for low-background imaging. While the ability to detect the presence of radiation (i.e. qualitative measurement) has been demonstrated at Sandia National Laboratories, there are several challenges in correlating images to known dose-fields (quantitative measurement). These challenges include: a low signal to background ratio, interferences due to electronic …

Advanced Paving Materials And Technologies, Zhanping You, Qingli Dai, Feipeng Xiao

Michigan Tech Publications, Part 1

No abstract provided.

College Of Engineering News, Georgia Southern University

College of Engineering & Computing: News & Publications (2010-2023)

• MSAE Student Sushmita Khan and Drs. Kaleta and Yin Win Best Paper Award at SAIS 2018

Numerical Investigation Of Performance Of Ducted Dual Rotor Wind Turbine, Ahmed Elbaz

Mechanical Engineering

Dual rotor wind turbine system presents higher energy extraction rates from wind.  In the present study, it is proposed to utilize the dual rotor configuration in a ducted system using wind lens in order to enable its applications at regions of low wind speeds. The aerodynamic performance of ducted dual rotor wind turbine is investigated using CFD modelling to solve 3-D turbulent-steady incompressible flow. Mesh independent study was made to ensure the accuracy and validate the results. Detailed investigations of the effect of lens on wind turbine performance in different configurations are presented and analyzed. Power curves are presented and …

Information Technology News, Georgia Southern University

Information Technology: News & Publications (2012-2023)

• MSAE Student Sushmita Khan and Drs. Kaleta and Yin Win Best Paper Award at SAIS 2018

Faculty Promotions 2018 | College Of Engineering, Usu College Of Engineering

College of Engineering News

The College of Engineering at Utah State University extends its congratulations to four newly-promoted faculty members.

The Catalytic Activity Of Copper Oxide Nanoparticles Towards Carbon Monoxide Oxidation Catalysis: Microwave – Assisted Synthesis Approach, Hany A. Elazab Dr

Chemical Engineering

In this research, we report a simple, versatile, and reproducible method for the synthesis of copper oxide nanoparticles via microwave assisted synthesis approach. The important advantage of this catalyst is due to its important role not only in the low temperature oxidation of CO but also in potential applications in pharmaceutical and fine chemical synthesis. The results reveal that the copper oxide catalyst has particularly a remarkable high activity for CO oxidation catalysis as it was found that copper oxide (CuO) catalyst has 100% conversion of carbon monoxide into carbon dioxide at 175 oC. This also could be attributed to …

Review Of Challenges And Advances In Modification Of Food Package Headspace Gases, Ziynet Boz, Bruce A. Welt, Jeffrey K. Brecht, William Pelletier, Eric Mclamore, Gregory A. Kiker, Jason E. Butler

Journal of Applied Packaging Research

Modified Atmosphere Packaging (MAP) has been widely used as an effective way to preserve foods. Fresh produce, meat and meat products, seafood, and dairy products can benefit from modified gaseous atmospheres, which are usually achieved by reducing oxygen and increasing carbon dioxide concentrations, within limits, defined by product tolerances. MAP of fresh produce is particularly challenging because products are living and respiring. Respiration rates depend on several factors including temperature, oxygen, and carbon dioxide concentrations. Balancing package permeation with respiration is challenging, often due to limited selection of practical packaging materials. Failing to remain within tolerance limits of products leads …