Engineering Commons^™

Optimization Of Chemical Kinetic Mechanism For Efficient Computation Of Combustion Process In Advanced Internal Combustion Engine Configurations, Muzammil Arshad

Theses and Dissertations

For the development and optimization of future fuels and automotive engines, computer modeling and simulation has proved itself as an inseparable, efficient and cost effective tool to experimental studies. The traditional reliance of computer models on simplified global reaction steps to simulate the combustion and engine performance parameters, such as in-cylinder pressure, heat release rate and pollutant formation could reduce credibility of the predictions as the global reaction steps depend on arbitrary adjustment of model parameters. This study has incorporated detailed chemistry by augmenting the combustion model of a three dimensional unsteady compressible turbulent Navier-Stokes solver with liquid spray injection …

Simulation Based Cost-Benefit Analysis For The Inspection Of Highway Bridges Using Small Unmanned Aerial Systems, Rashmi Kadamkulangara Balagopalan

Theses and Dissertations

Visual inspections remain significantly important in surveying the present decay and deterioration status of bridge inspections. These inspections are critical to conduct patch-up remedies and maintenance assignments to guarantee the continued serviceability of structures. Given the high inventory of bridges nationwide (over of 600,000 bridges), increasing costs of bridge inspections are becoming a concern for departments of transportation (DOTs). The conventional inspection method is costly due to various factors. For example, the current approach often requires specialized equipment (e.g., bucket trucks) to conduct underside bridge inspections that significantly affect safety levels on the field and overall costs, and inspectors need …

Construction Techniques And Statistical Analysis Of Dielectric Elastomer Actuators, Adam Morrone

Senior Honors Theses

In this study, a series of experiments were conducted to investigate and improve upon existing construction methods of dielectric elastomer actuators (DEAs). First, a proof of concept was built, which utilized a DEA as an active diaphragm to reproduce sound. Next, two electrode sizes and construction methods were compared via statistical analysis of electrode strain. In an attempt to develop an easier and more efficacious electrode construction method, the substance used for electrodes was then dissolved in six solvents. A commercially available graphite spray was compared against the solutions and determined to be the most promising on the basis of …

Highly Flame Retardant And Bio-Based Rigid Polyurethane Foams Derived From Orange Peel Oil, Chunyang Zhang

Electronic Theses & Dissertations

Polyurethane is an important class of polymer which is being used for various industrial applications in the form of rigid foams, flexible foams, thermoplastic, elastomer, coating, and adhesive. Especially there is a huge market for rigid polyurethane foams for their applications as thermal insulating material in building and housing. In general, polyurethanes are prepared using polyols and diisocyanates. Most of the polyols used by industries are petrochemical based. In this project, a novel polyol from an orange peel oil-based derivative, limonene dimercaptan, was synthesized using one step photochemical thiol-ene reaction. The synthesized polyol was used to prepare flame retardant polyurethane …

Combined Approaches For Quantifying Groundwater-Surface Water Exchanges In Karst Watersheds, Hyrum Tennant

Undergraduate Honors Capstone Projects

Increasingly, groundwater and surface water are thought of as a single source [Winter, 1998]. This is due to the frequent groundwater-surface water exchanges that can occur on a varying spatial and temporal scale within a watershed. Geology and topography are two key factors in dictating the spatial frequency of these exchanges [Winter, 1999]. Understanding groundwater-surface water exchanges both temporally and spatially is critical to managing watersheds effectively. Quantifying these exchanges can be further complicated by the presence of karst geology within a watershed [Lauber and Goldscheider, 2014]. Large karst features can supply groundwater to surface …

Software Defined Radio System For Cubesat Communication, Tyler Gardner

Undergraduate Honors Capstone Projects

Cube satellites, or CubeSats, are small satellites designed around a base unit cube of 10 cm by 10 cm by 10 cm which is commonly referred to as a one unit, or 1 U, CubeSat. The modular architecture of CubeSats allows multiple 1 U frames to be stacked together to form a larger (1.5U, 2U, usually up to 6U) frame as needed. Because CubeSats are cheaper to develop and deploy in orbit than larger satellites, they have become increasingly common for academic, amateur, commercial, and scientific applications over the past five to ten years. There is potential that CubeSats will …

Designing A Synthetic Spider Silk Based Coating For Urinary Catheters To Reduce The Risk Of Cautis, Tess Marie Armbrust

Undergraduate Honors Capstone Projects

Catheter associated urinary tract infections (CAUTis) are a leading cause of morbidity and mortality in patients with life-threatening conditions. Foley catheters are the most common catheter used when a patient requires hospitalization but can become burdened with microbes which lead to CAUTis, the most common source of hospital acquired infection (HAI). The attached bacteria can form biofilms on the catheter which are difficult to treat using oral antibiotics and can lead to chronic infections. Synthetic spider silk as a catheter coating shows great promise because of demonstrated strength, biocompatibility, and antimicrobial properties. In addition, the antiseptic chlorhexidine can enhance the …

Mechatronic Carnival, Caroline Kutach, Charlotte Liu, Nic Rodriguez, Laura Wilson

Mechatronics Final Projects

The goal for our design was to create a two-player water gun shooting game. The object of the game is to use a water gun to aim a stream of water at a target and fill up a tank. The player who is able to successfully fill up their tank first is the winner.

The design consists of two water guns that are powered by a pump. They are used to shoot at a target in the backboard of the device. As the tank fills up, LEDs light up to indicate each player’s progress. When a tank is full, all …

Variable Input Pressure Regulator, Sean Farrell, Dupri Grimes, William Mcelvogue, Nathan Richter

Mechatronics Final Projects

The variable input pressure regulation system was designed to carry out a test in accordance with the ASTM E1105 standardized commercial window testing procedure. This testing standard dictates that a negative pressure must be maintained within 2% of a constant value while a curtain wall spray system saturates the window from the outside. The test lasts around 15 - 20 minutes depending on the window type, though it may last longer if the user chooses. Currently, the test is performed by a user regulating differential pressure with a variable pump power dial, a gate valve, and a high precision liquid …

Improving Operator Situation Awareness By Phasor Measurement Unit (Pmu) Data Visualization, Esa M. Rantanen, Ernest Fokoue, Jacob Haut, Chandini Ramesh, Kathleen Gegner, Thomas Overbye, Komal Shetye

Articles

The application of phasor measurement unit (PMU) data in the power industry is currently an area of intense interest. The key driver for PMU technology is to use the precise time sources provided by Global Positioning System (GPS) satellites to accurately measure the relative voltage and current phase angles at buses across an interconnect at a very high sampling rate. Presenting PMU data to power system operators in a format that is truly useful for them and that affords improved situation awareness (SA) and fast and accurate decision making is a particular challenge to display design. This report describes development …

Feasibility For An Improved Method Of Deep Bed In-Bin Grain Drying, Ali Ezell

Biological and Agricultural Engineering Undergraduate Honors Theses

In-bin grain drying reduces the moisture content of field harvested grain down to a level suitable for profitable storage. The traditional method for in-bin deep bed grain drying is conducted in a cylindrical grain bin with an approximate height to diameter aspect ratio of 1:2, a stirring mechanism, a bottom plenum, a fan, and a heating element. This method poses problems by having a drying front that can move through the grain bed too slowly causing over or under drying leading to losses. This method also requires a stirring mechanism with significant capital costs and the inability to use sensing …

Performance Assessment Of Solid State Anaerobic Digestion Of Poultry Litter, Mason Puckett

Biological and Agricultural Engineering Undergraduate Honors Theses

The disposal of poultry litter can exert an economic and environmental burden to the agriculture community. As a result, it is desirable to reduce the amount of waste and recover resources from the waste. This study focuses on the construction and preliminary testing of a laboratory scale (20 L) solid state anaerobic digester (AD) fed with dry poultry litter. Glucose was added in addition to the poultry litter to achieve the appropriate C:N ratio to support the growth of anaerobic microorganisms. The AD was first fed every 4 days at 4 g VS/L/feeding for 24 days, rested (no feeding) for …

Automated Control System Design Manual For Plant Growth And Support, Brooke Benham

Biological and Agricultural Engineering Undergraduate Honors Theses

The “Automated Control System Design Manual for Plant Growth and Support” project contains a teaching manual for high school students and teachers to use to aid in teaching STEM subjects. Building confidence in students and encouraging the pursuit of STEM related fields is one of the primary functions. This project utilizes low cost instruments and freely available software to teach the construction, installation, programming, and application for an automated control system with emphasis on plant growth and regulation. The end result is a fully automated system that can be controlled wirelessly via an android application to monitor temperature, humidity, and …

Optimizing Construction Estimation: A Case Study Of The Etsu Football Stadium And The Etsu Fine Arts Center, John Paul Mitra

Undergraduate Honors Theses

Considering the complexity of the construction industry, it is vital to predict costs accurately throughout the entire planning, design, and construction process of a project. Various factors such as overhead, delays, cost variation, and program and scope play significant roles in determining the viability and profitability of a project. Thus, it is important to learn about what makes construction estimates so variable even among expert estimators within the same company. This study will look at the estimation methods used by BurWil Construction Company and Denark Construction, Inc. for the ETSU Football Stadium and the ETSU Fine Arts Center, respectively, as …

Building Data Visualization Applications To Facilitate Vehicular Networking Research, Noah Carter

Undergraduate Honors Theses

A web app was developed which allows any internet-connected device to remotely monitor a roadway intersection’s state over HTTP. A mapping simulation was enhanced to allow researchers to retroactively track the location and the ad-hoc connectivity of vehicle clusters. A performance analysis was conducted on the utilized network partitioning algorithm. This work was completed under and for the utility of ETSU’s Vehicular Networking Lab. It can serve as a basis for further development in the field of wireless automobile connectivity.

Surface Area And Electrocatalytic Properties Of Feni Nanoparticles For The Oxygen Evolution Reaction (Oer), James Burrow

Chemical Engineering Undergraduate Honors Theses

Iron-nickel bimetallic electrocatalysts have recently emerged as some of the best candidates for the oxygen evolution reaction (OER) in alkaline electrolyte. Understanding the effects of composition and morphology of iron-nickel nanoparticles is crucial for optimization and enhanced electrocatalyst performance. Both physical surface area and electrochemical surface area (ECSA) are functions of morphology. In this study, four different iron-nickel nanoparticle catalysts were synthesized. The catalysts were varied based on morphology (alloy versus core-shell) and composition (low, medium, and high stabilizer concentration). Brunauer-Emmett-Teller (BET) surface area analysis was conducted on three of the synthesized iron-nickel nanoparticles using a physisorption analyzer while electrochemical …

Wafer Enhanced Electrodeionization For Conversion Of Co2 Into Bicarbonate Feed For Algae Cultured Photobioreactors, Kayvan Afrasiabi

Chemical Engineering Undergraduate Honors Theses

The world has acknowledged climate change as a global crisis that demands considerable attention, with one of the largest culprit being carbon emissions from industrial processing and power generation. While reduction in carbon emissions is the principal action towards mitigating the effects of climate change, scientists and engineers have given increased attention to alternative sources of energy as well as methods of carbon sequestration to coax traditional manufactory and industry into environmentally friendly and sustainable practices. One technology of this nature is the use of wafer-enhanced electrodeionization (WE-EDI) membranes to convert gaseous carbon dioxide (CO₂) from industrial flue …

Sulfate Removal From Mine Impacted Waters, Tyler Shock

Chemical Engineering Undergraduate Honors Theses

Woo Pig Sulfate (WPS) has developed two methods for reducing levels of calcium sulfate in mine impacted waters, a “hot process” and a two-stage nanofiltration process. Both processes were designed to treat gypsum saturated water that is currently being pumped via interceptor wells to prevent the spread of a sulfate plume into a nearby community. Each solution was designed for Freeport McMoran’s Sierrita mine in Green Valley, Arizona, which was visited in order to gain insight about the problem. Below 250 ppm on the treated stream, nanofiltration and the hot process achieve overall recoveries of 84 and 99%, respectively. The …

Direct Potable Reuse Of Wastewater, Aaron Henry, Molly Churchwell, Lauren Clark, Boyce Bethel, Dakota Rusk, Sabrina Castle

Chemical Engineering Undergraduate Honors Theses

Water is essential to our societies and mankind. Currently, 844 million people across the globe lack access to potable water. By 2025, it is projected that half of the world population will be in a region of water stress.5 The water crisis is often thought of as a problem limited to places that have always struggled to have clean water, but it is now affecting new areas such as the southwest United States. With increasing population demands and drought, the feasibility of direct potable reuse (DPR) of wastewater is being considered. According to an EPA report in 2017, there are …

Sulfate Removal From Mine Impacted Waters, Derek Richard

Chemical Engineering Undergraduate Honors Theses

Woo Pig Sulfate (WPS) has developed two methods for reducing levels of calcium sulfate in mine impacted waters, a “hot process” and a two-stage nanofiltration process. Both processes were designed to treat gypsum saturated water that is currently being pumped via interceptor wells to prevent the spread of a sulfate plume into a nearby community. Each solution was designed for Freeport McMoran’s Sierrita mine in Green Valley, Arizona, which was visited in order to gain insight about the problem. Below 250 ppm on the treated stream, nanofiltration and the hot process achieve overall recoveries of 84 and 99%, respectively. The …

Direct Potable Reuse Of Wastewater, Dakota Rusk, Molly Churchwell, Lauren Clark, Sabrina Castle, Boyce Bethel, Aaron Henry

Chemical Engineering Undergraduate Honors Theses

Water is essential to our societies and mankind. Currently, 844 million people across the globe lack access to potable water. By 2025, it is projected that half of the world population will be in a region of water stress. The water crisis is often thought of as a problem limited to places that have always struggled to have clean water, but it is now affecting new areas such as the southwest United States. With increasing population demands and drought, the feasibility of direct potable reuse (DPR) of wastewater is being considered. According to an EPA report in 2017, there are …

Direct Potable Reuse Of Wastewater, Lauren Clark

Chemical Engineering Undergraduate Honors Theses

Water is essential to our societies and mankind. Currently, 844 million people across the globe lack access to potable water. By 2025, it is projected that half of the world population will be in a region of water stress.⁵ The water crisis is often thought of as a problem limited to places that have always struggled to have clean water, but it is now affecting new areas such as the southwest United States. With increasing population demands and drought, the feasibility of direct potable reuse (DPR) of wastewater is being considered. According to an EPA report in 2017, there …

Degradation Of Orange G Through Persulfate Activated Nanoscale Zerovalent Iron Composites And Boron-Doped Diamond Electrodes, Suzana Ivandic

Chemical Engineering Undergraduate Honors Theses

Properly treated wastewater is necessary for water reuse and to avoid unnecessary impacts on the environment. The poultry industry utilizes large amounts of water for poultry processing. The need for innovative ways to treat organic contaminants in the poultry wastewater industry is especially necessary due to increased poultry consumption. The U.S. Department of Agriculture projected Americans would consume approximately 92 pounds of chicken per person in 2017.¹ Dissolved air flotation (DAF) is currently used in poultry wastewater treatment, but DAF does not remove organic contaminants efficiently per effluent standards. Implementation of processes that degrade contaminants directly would benefit the …

Direct Potable Reuse Of Wastewater, Sabrina Castle

Chemical Engineering Undergraduate Honors Theses

Water is essential to our societies and mankind. Currently, 844 million people across the globe lack access to potable water. By 2025, it is projected that half of the world population will be in a region of water stress.5 The water crisis is often thought of as a problem limited to places that have always struggled to have clean water, but it is now affecting new areas such as the southwest United States. With increasing population demands and drought, the feasibility of direct potable reuse (DPR) of wastewater is being considered. According to an EPA report in 2017, there are …

Removal Of Carbamazepine From Drinking Water, Paola Marrero-Rivera, Adam Johnson, Jordan Alex Gadberry, Juan Rodriguez, Thomas Krumpolc, Zach Wiese

Chemical Engineering Undergraduate Honors Theses

Due to the increasing prevalence of prescription medication over the past few decades, pharmaceuticals have accumulated in various water sources. This has become a public health concern because many pharmaceuticals have limited research on the effects of chronic low-level exposure.One pharmaceutical of interest that has been detected in water sources is carbamazepine. Carbamazepine (CBZ) is a common pharmaceutical prescribed for the treatment of seizure disorders, neuropathic pain, and various psychological disorders. It’s mechanism of action is “sodium channel blocking,” which is the impairment of conduction of sodium ions in sodium channels. This, in effect, reduces nervous-system conductivity in key areas …

Cross-Linking Amyloid Forming Proteins For Improved Understanding Of Early Aggregation, Gram Booth

Chemical Engineering Undergraduate Honors Theses

Alzheimer’s disease is the only disease in the ten leading causes of death in the United states that cannot be slowed, prevented, or cured. Alzheimer’s dementia and type II diabetes are the top two diseases caused by improper protein folding, aggregation, and deposition of fibrillar plaques in tissues. These plaques, originally thought to be the cause of these diseases, have been discovered to be mostly benign and representative of the later stages of the disease. The smaller, more soluble oligomeric aggregates are responsible for the death of pancreatic and neural cells. Many oligomeric species are unstable and exist only for …

A Proposed Process And Economic Analysis For A Manufacturing Facility For Nylon 6,6, Perry Doles

Chemical Engineering Undergraduate Honors Theses

The global nylon market is a multi-billion-dollar industry that has been thriving in recent years due to advances in the process technology and its flexibility as a material. Nylon 6,6 is a versatile material with uses in many industries because of its ability manipulated into many forms. It is commonly used in applications that require heat resistance, chemical resistance, and high mechanical strength. It is commonly used in luggage, car parts, carpets, and many other plastic products that require the properties that nylon 6,6 exhibits. The versatility and demand for nylon 6,6 make it an attractive process for many potential …

Aerospace Mission Outcome: Predictive Modeling, Ephraim Suhir

Mechanical and Materials Engineering Faculty Publications and Presentations

Human-in-the-Loop (HITL)-related models can be applied in various aerospace vehicular problems, when human qualifications and performance are crucial and the ability to quantify them is therefore imperative; since nobody is perfect, these evaluations should preferably be done on a probabilistic basis. The suggested models can also be used in many other areas of applied science and engineering, not even necessarily vehicular engineering, when a human encounters an extraordinary situation and should possess a sufficiently high human capacity factor (HCF) to successfully cope with an elevated mental workload (MWL). The incentive for probabilistic predictive modeling and the rationale for such modeling …

Improving Spatial Visualization Abilities Using 3d Printed Blocks, Vanessa Lebow, Michelle Bernhardt-Barry, Jyotishka Datta

Civil Engineering Undergraduate Honors Theses

Spatial visualization abilities have been shown to be a key predictor of success in science, technology, engineering, and math fields. Past research has revealed that women and underrepresented minorities tend to lag behind in spatial visual abilities, however, research has also shown that these skills can be improved with guided practice. This study seeks to examine whether 3D printed aids help spatial visual retention in 6th graders. A modified Purdue spatial visualization test was used as the assessment standard. Students’ mental rotation abilities were assessed before and after the 3D printed aids were administered. Data was collected from five different …

Development Of A Hydraulic Conductivity Placement Window Using Centrifuge Techniques, Greg Thomas

Civil Engineering Undergraduate Honors Theses

A centrifuge soil testing device, currently operated by researchers at the University of Arkansas, was used to develop a technique to determine a hydraulic conductivity placement window. The purpose of this research was to develop a placement window by means of a centrifuge instead of by means of a panel board. Soil specimens were created at standard PRcotor energy and at 50 percent of Standard Proctor energy at -3 percent of optimum, -1.5 percent of optimum, two specimens at optimum, +1.5 percent of optimum, and +3 percent of optimum water content. Values of hydraulic conductivity for the respective specimens were …