Engineering Commons^™

Midpoint And Endpoint Sustainability Assessment Of U.S. And China Manufacturing: A Comparative Mrio+Recipe Analysis, Mustafa Saber

Master's Theses

Manufacturing is among the most important industries for an economy, which creates value-added, fosters innovation, stimulates employment and economic growth. Therefore, manufacturing industries are crucial for a country’s sustainable development not only for economic reasons but also for social (.e.g. employment, tax, etc.) and environmental ones. Thus, manufacturing activities’ contribution to the economy is critically related with environmental and social impacts. Sustainable economic growth is essential and necessary for a country to provide all necessary goods and services to its growing population.

And, this is highly linke with the creation of new jobs and in this context, manufacturing jobs have …

Generating Exploration Mission-3 Trajectories To A 9:2 Nrho Using Machine Learning, Esteban Guzman

Master's Theses

The purpose of this thesis is to design a machine learning algorithm platform that provides expanded knowledge of mission availability through a launch season by improving trajectory resolution and introducing launch mission forecasting. The specific scenario addressed in this paper is one in which data is provided for four deterministic translational maneuvers through a mission to a Near Rectilinear Halo Orbit (NRHO) with a 9:2 synodic frequency. Current launch availability knowledge under NASA’s Orion Orbit Performance Team is established by altering optimization variables associated to given reference launch epochs. This current method can be an abstract task and relies on …

Assessing Risk In Iot Devices, David Levitsky

Master's Theses

The explosive growth of the Internet of Things ecosystem has thrust these devices into the center of our lives. Unfortunately, the desire to create these devices has been stronger than the one to secure them. Recent attacks have shown us ignoring security in Internet of Things devices can cause severe harm in both a digital and physical sense. This thesis outlines a framework for developers and managers to assess the risk of IoT devices using a weighted scoring system across five different categories. Our case studies suggest that devices with higher security considerations have a better security posture and lower …

Micro-Nozzle Simulation And Test For An Electrothermal Plasma Thruster, Tyler J. Croteau

Master's Theses

With an increased demand in Cube Satellite (CubeSat) development for low cost science and exploration missions, a push for the development of micro-propulsion technology has emerged, which seeks to increase CubeSat capabilities for novel mission concepts. One type of micro-propulsion system currently under development, known as Pocket Rocket, is an electrothermal plasma micro-thruster.

Pocket Rocket uses a capacitively coupled plasma, generated by radio-frequency, in order to provide neutral gas heating via ion-neutral collisions within a gas discharge tube. When compared to a cold-gas thruster of similar size, this gas heating mechanism allows Pocket Rocket to increase the exit thermal velocity …

Investigating The Effect Of An Upstream Spheroid On Tandem Hydrofoils, Joel Tynan Guerra

Master's Theses

This thesis documents a series of three dimensional unsteady Reynolds Averaged Navier-Stokes CFD simulations used to investigate the influence of an upstream prolate spheroid body on tandem pitching hydrofoils. The model is validated by performing separate CFD simulations on the body and pitching hydrofoils and comparing results to existing experimental data. The simulations were run for a range of Strouhal numbers (0.2-0.5) and phase differences (0-π). Results were compared to identical simulations without an upstream body to determine how the body affects thrust generation and the unsteady flow field.

The combined time-averaged thrust increases with Strouhal number, and is highest …

Il-12 Gene Electrotransfer Triggers A Change In Immune Response Within Mouse Tumors, Guilan Shi, Chelsea Edelblute, Sezgi Arpag, Cathryn Lundberg, Richard Heller

Bioelectrics Publications

Metastatic melanoma is an aggressive skin cancer with a relatively low survival rate. Immune-based therapies have shown promise in the treatment of melanoma, but overall complete response rates are still low. Previous studies have demonstrated the potential of plasmid IL-12 (pIL-12) delivered by gene electrotransfer (GET) to be an effective immunotherapy for melanoma. However, events occurring in the tumor microenvironment following delivery have not been delineated. Therefore, utilizing a B16F10 mouse melanoma model, we evaluated changes in the tumor microenvironment following delivery of pIL-12 using different GET parameters or injection of plasmid alone. The results revealed a unique immune cell …

Proposed Router And Switch Design With Introduction Of Buffering To Reduce Retransmission Cost By Reducing Bandwidth And Time Of Corrupt Packet, Manoj R. Chakravarthi

Manipal Journal of Science and Technology

A new design of router and switch is proposed in this paper to decrease the unnecessary wastage of transmission bandwidth capacity because of retransmission of corrupt or lost packets. A buffer memory is joined to every router and switch. Every one of the packets that go through a router is stored in the buffer memory for a short time. On the off-chance that a packet is discarded at any router, it tends to be asked from the past router, which has a duplicate of the packet in its buffer. Through our approach, we spare a great deal of data transmission …

Gabias Epitaxial Thin Films For Quantum Well Solar Cells, K K Nagaraja

Manipal Journal of Science and Technology

Resonant tunneling structures aid the effective extraction of charge carriers form deeper quantum wells. However, the need for aligning both the valance and electron subbands further complicates the process. The difference in the electron-hole confinement in GaBiAs can ease some of the design problems. Herein, we report the preliminary results on the growth of GaBiAs thin films. The films are grown by using the molecular beam epitaxy (MBE), and the structural and optical characterizations are carried out by high resolution XRD (HRXRD), and low temperature photoluminescence (PL), respectively. PL spectra confirms the formation of GaBiAs. The percentage of Bi in …

Integrated Health Monitoring And Reinforcement Of Transportation Structures With Optimized Low-Cost Multifunctional Braided Cables, Ibrahim Karaman, Darren Hartl

Publications

The objective of this research study is to design, fabricate, and characterize multifunctional high strength and self-sensing braided cables and structures using novel Fe-based shape memory alloys (SMAs). The system exploits unique properties of recently developed low-cost super-elastic FeMnAlNi SMAs, which enables excellent super-elastic properties, high strength, and self-sensing in structural health monitoring (SHM) systems. This novel material technology can be coupled with modeling efforts that allow for accurate prediction of both the materials and structural response during sensing. At the conclusion of the project, we have demonstrated that with careful design of processing parameters, it is possible to control …

Sustainable And Equitable Financing For Pedestrian Infrastructure Maintenance, Gregory Rowangould

Data

Corresponding data set for Tran-SET Project No. 17PPUNM01. Abstract of the final report is stated below for reference:

"In many communities, pedestrian infrastructure is discontinuous, inaccessible to those with physical disabilities, and poorly maintained. Correcting these problems would be a first step in providing infrastructure to achieve the active travel and related transportation goals of many communities. One nearly universal challenge to maintaining sidewalks in a state of good repair and addressing environmental justice concerns is an adequate, sustainable, and equitable source of funding. Municipal governments across the country maintain and repair their streets and roadways; however, most require residents …

Recruiting, Retaining, And Promoting For Careers At Transportation Agencies, Christofer Harper, Susan Bogus, Raghava Kommalapati, Doeun Choe

Data

Corresponding data set for Tran-SET Project No. 17PPLSU07. Abstract of the final report is stated below for reference:

"State transportation agencies currently face complex challenges in recruiting and retaining the workforce necessary to function effectively. The situation exacerbates due to the number of employees from different generations that have to coexist with varying values, expectations, and principles. These agencies are primarily comprised of two generational groups: the baby-boomers, who are approaching retirement and occupy many managerial positions; and the millennials, who are demonstrating their interest in technology and demanding dynamism in their careers. This multiplicity of interest represents a challenge …

Evaluation Of Comparative Damaging Effects Of Multiple Truck Axles For Flexible Pavements, Stefan Romanoschi, Athanassios Papagiannakis

Data

Corresponding data set for Tran-SET Project No. 17PUTA01. Abstract of the final report is stated below for reference:

"This study aims at evaluating the effect of overlapping flexible pavement strain responses from truck axles that are not part of multiple axle configurations (i.e., tandem, triple and quad). For this purpose, a newly constructed pavement was instrumented with strain gauges installed at the bottom of the asphalt concrete base layer on US-287 south of Mansfield, TX. This pavement structure is typically used for medium- to high-volume roads in the South-Central region of the United States. The strain gauges were used to …

Development Of Environmentally-Friendly Stabilization Methods For Transportation Infrastructure Based On Geopolymers, Miladin Radovic, Anand Puppala

Data

Corresponding data set for Tran-SET Project No. 17GTTAM02. Abstract of the final report is stated below for reference:

"Geopolymers (GPs) have received much attention as an eco-friendly and sustainable alternative to conventional chemical additives, since they can be processed at room temperatures from aqueous solutions by utilizing waste materials (e.g. fly ash) or abundant natural sources (e.g. clay). A collaborative research study is carried out by teams from Texas A&M University (TAMU) and University of Texas at Arlington (UTA) to investigate the effectiveness of GPs for stabilizing base and subgrade materials by considering the strength and shrink-swell characteristics. Two types …

Sustainability-Based Long-Term Management Of Bridges Under Multi-Hazard Exposure, Mohamed Soliman

Data

Corresponding data set for Tran-SET Project No. 17STOKS01. Abstract of the final report is stated below for reference:

"Bridges are under deterioration due to various mechanical and environmental stressors. Hydraulic-related hazards (e.g., flood and scour), aggressive environmental conditions, and seismic events (e.g., earthquake) are recognized as the most significant threats to the safety of bridges. In traditional risk assessment methods for structures susceptible to damage due to floods and other natural hazards (e.g., corrosion and seismic events), future hazard predictions are conducted using historic return periods and climate records. However, recent increase in flood intensity in central-southern states indicate that …

Use Of Nanoclays As Alternatives Of Polymers Toward Improving Performance Of Asphalt Binders, Zahid Hossain, Ashraf Elsayed

Data

Corresponding data set for Tran-SET Project No. 17BASU01. Abstract of the final report is stated below for reference:

"The main goal of this study is to assess the feasibility of the use of nanoclay as an alternative to commonly used polymers such as styrene-butadiene-styrene (SBS), which are used to modify the performance grade (PG) of asphalt binders. Three types of nanoclay and two types of neat binders were selected for laboratory investigation. Different amounts (1, 2, and 3%) of nanoclays were used. A blending protocol has been developed to mix the nanoclay with the asphalt binder. Rotational Viscosity (RV), Dynamic …

Research Incentive Programs For Closures Of Public And Private Grade Crossings, Julius Codjoe

Data

Corresponding data set for Tran-SET Project No. 17PPLSU13. Abstract of the final report is stated below for reference:

"Vehicle-train crashes that occur at highway-rail crossings result in injuries, fatalities, and damage to equipment. In order to reduce the number of vehicle-train crashes, Federal Railroad Administration requires states which have challenges with crossing safety, including Louisiana, to develop a State Action Plan to improve grade crossing safety. Consequently, identification of specific solutions for improving safety at crossings was included in the 2015 Louisiana Transportation Plan as one of its objectives. This study seeks to identify and evaluate current and new incentive …

Use Of Ultra‐High‐Performance Fiber‐Reinforced Concrete (Uhp‐Frc) For Fast And Sustainable Repair Of Pavements, Shih-Ho Chao

Data

Corresponding data set for Tran-SET Project No.17STUTA03. Abstract of the final report is stated below for reference:

"This research presents a new methodology, which enables streets, roads, highways, bridges, and airfields to use an advanced fiber-reinforced concrete material, which can delay or prevent the deterioration of these transportation infrastructure when subjected to traffic and environmental loadings. The major problem of concrete is its considerable deterioration and limited service life due to its brittleness and limited durability. As a result, it requires frequent repair and eventual replacement, which consumes more natural resources. Ultra-high-performance fiber-reinforced concrete (UHP-FRC) introduces significant enhancement in the …

Self-Healing Microcapsules As Concrete Aggregates For Corrosion Inhibition In Reinforced Concrete, Homero Castaneda, Marwa Hassan, Miladin Radovic, Jose Milla

Data

Corresponding data set for Tran-SET Project No. 17CLSU08. Abstract of the final report is stated below for reference:

"Reinforced Concrete (RC) structures are vital to the US’s civil infrastructure for their strength and versatility. Unfortunately, RC elements deteriorate rapidly when exposed to corrosive environments. One possible solution is to extend the life of RC elements and systems using microencapsulated corrosion inhibitors to reduce the rebar corrosion rate. The capsules house an anodic corrosion inhibitor agent including calcium nitrate (CN) and triethanolamine (TEA). The integration of such microencapsulated materials will enhance the durability and extend the useful life by controlling the …

Enhancing The Durability And The Service Life Of Asphalt Pavements Through Innovative Light-Induced Self-Healing Materials, Marwa Hassan

Data

Corresponding data set for Tran-SET Project No. 17BLSU02. Abstract of the final report is stated below for reference:

"The objective of this study was to evaluate the efficiency of a new generation of Ultraviolet (UV) light-induced self-healing polymers in enhancing the durability and self-healing properties of asphalt mixtures. Self-healing polymers were successfully synthesized in the laboratory and were characterized using Fourier Transform Infrared Spectroscopy (FTIR). In addition, Thermogravimetric Analysis (TGA) results showed that the synthesized polymers achieved the required thermal stability to resist asphalt mixture production processes. Viscosity results showed that addition of 5% Recycled Asphalt Shingle (RAS) and/or 20% …

Mitigating Traffic Congestion On I-10 In Baton Rouge, La: Supply- And Demand-Oriented Strategies & Treatments, Samir Ahmed, Osama Osman, Julius Codjoe

Data

Corresponding data set for Tran-SET Project No. 17ITSLSU09. Abstract of the final report is stated below for reference:

"The aim of this study is to develop a better understanding of the causes of traffic congestion on I-10 in the Baton Rouge, LA area, particularly at the I-10 Mississippi River Bridge, and to identify treatments and strategies to mitigate congestion at the bridge site. This study developed and calibrated a microsimulation model of I-10 (from Lobdell Highway in Port Allen to Highland Road, I-110 to Florida Street, and I-12 to Walker Road) and investigated several supply- and demand-oriented strategies. This includes: …

Development Of A Self-Healing And Rejuvenating Mechanisms For Asphalt Mixtures Containing Recycled Asphalt Shingle, Marwa Hassan

Data

Corresponding data set for Tran-SET Project No. 17BLSU06. Abstract of the final report is stated below for reference:

"The objective of this study was to test the hypothesis that hollow-fibers encapsulating a rejuvenator product could improve both self-healing, rejuvenation, and mechanical properties of asphalt mixtures. Hollow-fibers containing a rejuvenating product were synthesized via a wet spinning procedure with sodium-alginate polymer as the encapsulating material. An optimization of the production parameters for the synthesis of fibers was performed to develop fibers suitable for high-temperature and shear stress environment typical of asphalt mixture production. A self-healing experiment was conducted to evaluate the …

Coastal Bridges Under Hurricane Stresses Along The Texas And Louisiana Coast, Adolfo Matamoros, Firat Testik

Data

Corresponding data set for Tran-SET Project No. 17STTSA02. Abstract of the final report is stated below for reference:

"The main objective of this study was to develop a high-resolution model capable of simulating the response of bridge structures to hydrodynamic loads for hurricane design conditions (i.e. surge height, wave height, and frequency) expected in the Texas-Louisiana coast. The model relied on Coupled Eulerian-Lagrangian techniques (CEL) where solids are simulated with Lagrangian meshes, while fluids are simulated using Eulerian meshes, and was calibrated using historical data from wave impact laboratory tests. Two high resolution models were created, the first of a …

Development Of A Self-Powered Structural Health Monitoring System For Transportation Infrastructure, Aydin Karsilaya, Samer Dessouky, Athanassios Papagiannakis

Data

Corresponding data set for Tran-SET Project No. 17PTAM03. Abstract of the final report is stated below for reference:

"Roadways and bridges play an important role in the economic and social health of society by connecting commerce and people. Economic growth and population expansion pose considerable burden on the aging infrastructure (i.e., pavements and bridges). There is a pressing need to develop structural health monitoring (SHM) technologies capable of collecting infrastructure utilization data. Doing so inexpensively with self-powered systems will revolutionize infrastructure monitoring technology, and will improve decision making enabling roadway and bridge preservation. In this study, a self-powered battery-less structural …

Investigating Problem Of Distracted Drivers On Louisiana Roadways, Xiaoduan Sun

Publications

Due to the escalating usage of cellphone and social networking, distracted driving is and will remain as one of the most serious problems faced by Departments of Transportation (DOTs) and law enforcement agencies. Under the aim of in-depth investigation of distracted driving crashes in Louisiana, the specific objectives of this study are: (1) reviewing the crash reports for the quality of distracted driving crash reporting, (2) analyzing distracted driving-related crashes through regression model and data mining algorithm to link the severity of distracted driving crashes with the contributing factors collected in crash data, (3) investigating the observable characteristics of distracted …

A Comprehensive Reliability-Based Framework For Corrosion Damage Monitoring And Repair Design Of Reinforced Concrete Structures, Homero Castaneda, Aydin Karsilaya, Ayman Okeil, Mahmoud Reda Taha

Data

Corresponding data set for Tran-SET Project No. 17STLSU03. Abstract of the final report is stated below for reference:

"In this work, we developed a comprehensive framework for corrosion management of reinforced concrete (RC) structures. This framework includes critical steps of an effective approach to quantify the damage evolution as well as providing the timeframe for effective maintenance/repair strategies for corrosion assessment in RC structures. The framework included several activities including the use of indirect and direct inspection tools, theoretical development for damage prediction, experimental measurements and theoretical development of repair time based on reliability. The uniqueness of the framework is …

Real-Time Heuristics And Metaheuristics For Static And Dynamic Weapon Target Assignments, Alexander G. Kline

Theses and Dissertations

The problem of targeting and engaging individual missiles (targets) with an arsenal of interceptors (weapons) is known as the weapon target assignment problem. This problem has been well-researched since the seminal work in 1958. There are two distinct categories of the weapon target assignment problem: static and dynamic. The static weapon target assignment problem considers a single instance in which a known number of incoming missiles is to be engaged with a finite number of interceptors. By contrast, the dynamic weapon target assignment problem considers either follow on engagement(s) should the first engagement(s) fail, a subsequent salvo of incoming missiles, …

Experimental And Computational Analysis Of The Interaction Of Carbon And Silicon Ablation Products In Expanding Hypersonic Flows, Brian E. Donegan

Theses and Dissertations

Thermal protection is required for vehicles entering planetary atmospheres to protect against the severe heating loads experienced. Characterization of candidate materials is often done utilizing plasma or arc-jet facilities, which provide steady-state testing of the thermal environments experienced during hypersonic flight, but do not correctly simulate hypersonic flowfields. Conversely, impulse facilities can reproduce flight velocities and enthalpies but have extremely short test times, prohibiting testing of thermal response. Modeling ablation and heating rates, particularly in the wake region, remains a significant challenge due to the complexity of the flowfield. To better understand this complex phenomenon and provide data to validate …

Development And Characterization Of Nano Nickel-Based Conductive Inks For Flexographic Printing Of Electronics And New Interpretations Of Surface Energies Of Solids, Bilge Nazli Altay

Dissertations

Traditional printing technologies and conductive/functional inks have been integrated to print electronic devices and circuits on really think, lightweight and flexible materials in a time and cost-effective manner. Printing is an additive manufacturing technology, which selectively deposits materials only where needed to produce a wide range of devices including sensors, smart packaging, solar panels, batteries, light sources and wearable electronics. Therefore, it greatly reduces the number of required steps for manufacturing as well as the amount of waste generated relative to conventional electronic manufacturing. However, the process requirements and ink formulations to print electronics differ from graphic printing; therefore, the …

Vision-Based Framework For Monitoring Of Eating Behavior Of Persons With Alzheimer’S Disease, Haitham Al-Anssari

Dissertations

Dementia is a syndrome used to describe an array of significant declines in cognitive abilities due to progressive and irreversible loss of neurons and brain functioning. This neurodegeneration seriously affects daily life activities like driving, shopping, working and speaking. Among these, Alzheimer’s disease is the most common type of dementia, with individuals experiencing loss of memory and thinking and reasoning skills. Due to cognitive decline, individuals with Alzheimer’s often suffer from malnutrition, since they do not eat, even when food is presented, and must be fed with assistance. This assistance presents a significant burden of time to caregivers, and consequently …

Integrated Compressive Sensing And Feature Descriptors- A Framework For Facial Recognition Systems, Ali Kadhem Jaber

Dissertations

Facial recognition is still a challenge in many applications, particularly in surveillance, security systems, and human-computer interactive (HCI) tools. The impact of real-world environmental variations on the performance of any facial recognition system can be significant. These variations may include illumination, facial expressions, poses, disguises (facial hair, glasses or cosmetics) and partial face occlusion. Furthermore, the number of images (samples) needed for facial recognition systems can be very large, much larger than what is typically required by an algorithm, and this is often made worse with expansion of the feature space dimensionality. Truly, the “curse of dimensionality” haunts any real-time …