Engineering Commons^™

Tolerance Sensitivity Analysis And Robust Optimal Design Method Of A Surface-Mounted Permanent Magnet Motor By Using A Hybrid Response Surface Method Considering Manufacturing Tolerances, Cha-Seung Jun, Byung-Il Kwon, Ohbong Kwon

Publications and Research

This paper presents a robust optimal design method using a hybrid response surface method (H-RSM) which directly finds an optimal point satisfying a target Z-value or a probability of failure. Through three steps, this paper achieves the goal that is to increase the open-circuit airgap flux (OCAF) in a surface-mounted permanent magnet motor and decrease its variation caused by variations of the airgap lengths including an additional one between permanent magnets and rotor back yoke. First, the OCAF equation is derived from the magnetic equivalent circuit (MEC) considering the additional airgap. Then, the equation is validated by comparing its results …

City Of Tyler Hub-And-Spoke Bicycle Lane Network, Pedro A. Zavagna

Civil Engineering Theses

The purpose of this study is to showcase the up-to-date development of a Bicycle Lane Engineered Scoring System (BLESS) that will be utilized to map and identify the optimum feasible locations for bicycle lanes. The project was initiated for the City of Tyler, Texas where a Hub-and-Spoke bicycle lane will be designed around the city utilizing the BLESS. The design process is comprised of attentive planning, progressive development and a collective effort by the transportation engineering research team at the University of Texas at Tyler to design an exceptional bicycle lane network. The BLESS consisted of traffic analysis, lane configuration, …

A Study Of Acoustically Activated Nanodroplets, Songita Choudhury

Theses & Dissertations

Current treatment of acute myocardial infarction (AMI), which is the main pathophysiological event leading to death in the United States, has advanced considerably with the introduction of emergent percutaneous interventions, but there remains an urgent need for novel techniques to rapidly and accurately detect infarcted or ischemic tissue that results from AMI. Ultrasound contrast agents, also known as microbubbles (MB), have become commonplace in echocardiography. However, MBs are purely intravascular tracers and unable to cross endothelial barriers due to size. The limitations of MBs, namely size and short circulation times within the human body, led to the development of phase-change …

Determinants Of Multi-Scale Patterning In Growth Plate Cartilage, Alek Erickson

Theses & Dissertations

ABSTRACT

Functional architectures of complex adaptive systems emerge by dynamic control over properties of individual components. During skeletal development, growth plate cartilage matches bone geometries to body plan requisites by spatiotemporally regulating chondrocyte actions. Bone growth potential is managed by the proximodistal patterning of chondrocyte populations into differentiation zones, while growth vectors are specified by the unique columnar arrangement of clonal groups. Chondrocyte organization at both tissue and cell levels is influenced by a cartilage-wide communication network that relies on zone-specific release and interpretation of paracrine signals. Despite genetic characterization of signaling interactions necessary for cartilage maturation, the regulatory mechanisms …

Design Of A Homeopathic Solution For Chronic Cough, Jacob Ziemke

Senior Honors Projects, 2010-2019

Chronic cough is most commonly defined as a cough that persists for more than eight weeks and is estimated to affect more than 30 million people in the United States at any given time. Diseases contributing to the onset of chronic cough include asthma, pulmonary fibrosis, lung cancer, postnasal drip, gastroesophageal reflux disease (GERD), and bronchitis, and may include lifestyle choices such as smoking. For those who seek medical advice, pharmaceuticals and speech therapy are two common methods of combating chronic cough but serve to mask the symptoms rather than treat the problem; frequently, chronic cough is misdiagnosed or cannot …

Sustainable Agriculture: Integration Of Aquaponics At Punta Leona Hotel And Club In Costa Rica, Cailin Sierra Dyer, Paris Riley Smith

Senior Honors Projects, 2010-2019

Sustainable agriculture is becoming an increasingly important method of food production. As human populations continue to grow, attendant food demand has been increasingly met via agribusiness, including monoculture crop production and factory farming. As is well documented, the rise of agribusiness has led to resource degradation and declining stocks on which “sustainable agriculture” relies. This paper describes a local attempt to re-establish “sustainable agriculture” through the development of an aquaculture system that mimics a naturally occurring cycle that integrates fish and plants. The system was constructed over a three-week period in Punta Leona, Costa Rica. First, the ground was cleared …

The Power Of Coefficients And Methods Of Coding In Delimiting Species Using Phenetic Approach: The Case Of African Solanum Section Solanum Sensu Edmonds, Mkabwa Lk Manoko

Tanzania Journal of Science

Phenetics is one of approaches used to delimit species in plant classification. Conclusion in phenetics is based on overall similarity often of morphological data. The approach uses coded data that are analyzed using coefficients to create similarity matrices that are analyzed using clustering analysis to create the classification. Exists different similarity coefficients and coding methods though in practice are used intuitively sometimes giving results that have been challenged. Though similarity coefficients and coding methods have some times been blamed, studies to analyze their influences are limited. The trend however is to avoid morphological data in favor of DNA markers. The …

Total Electron Content Derived From Global Positioning System During Solar Maximum Of 2012-2013 Over The Eastern Part Of The African Sector, Emmanuel D Sulungu, Christian Bs Uiso, Patrick Sibanda

Tanzania Journal of Science

This work presents results of diurnal, seasonal and latitudinal variations of vertical Total Electron Content (TECv) derived from GPS receivers at four locations, [Dodoma (6.19oS, 35.75oE), Mzuzu (11.43oS, 34.01oE), Zomba (15.38oS, 35.33oE) and Tete (16.15oS, 33.58oE)] during the solar maximum period of 2012 – 2013. The receivers are located directly below the EIA and at approximately the same longitude, ~ (33 – 3 oE) within the eastern part of the African sector. Diurnal and latitudinal variations of TECv are presented for an average of the five (5) quietest days of each of the four seasons: March equinox, June solstice, September …

The Viability Of Quantum Computing, Brennan Michael King

Missouri S&T’s Peer to Peer

Quantum computing is an upcoming computational technology that could be the key to advancing the field and ushering in a new era of innovation. In this paper examines the viability of quantum computing extensively using only highly credible peer-reviewed articles from the last few years. These peer-reviewed articles will provide relevant facts and data from prominent researchers in the field of computer engineering. A growing problem in the field of electronics and computers is the concept of Moore’s law. Moore’s law refers to the doubling of transistors every two years in integrated circuits. Recent research has suggested that electronics may …

Experiences Building, Training, And Deploying A Chatbot In An Academic Library, David Meincke

Library Staff Publications

No abstract provided.

Analysis Of The Contribution Of Transportation And Land Use To Citizen Perceptions Of Livability, Rebecca Lewis

PSU Transportation Seminars

What is livability? How does the built environment influence resident perceptions of livability? Although livability is a broadly used term and a key goal in land use and transportation plans at the state level, it is unclear whether residents think their neighborhoods are livable and what contributes to their perception of livability. The purpose of the project was to understand how Oregonians, in neighborhoods of varying densities and within Metropolitan Planning Organizations (MPOs), perceive livability at the nexus of transportation and land use. We sought to understand how residents define and perceive livability in three different MPOs in the state: …

Thermal Comparison Of Polycrystalline Diamond And Aln In Power Semiconductor Device Packages, Brandon M. Guenther

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

The desire for improved thermal management in power semiconductor device packaging is becoming increasingly important due to the progression towards implementing wide-bandgap semiconductor (WBG) materials, such as silicon carbide (SiC) and gallium nitride (GaN). These semiconductor materials have the capability of operating at much higher voltages, temperatures, and frequencies compared to standard silicon-based devices. However, utilizing this enhanced operating region will induce larger thermomechanical stress within the package structure as a consequence of operating at higher junction temperatures around 250-300 °C. To handle the higher and improved operating characteristics from the WBG semiconductors, the current package technology is modified by …

Nmr Studies Of Loaded Microspheres, Ming Huang, Sisi Chen, Rex E. Gerald Ii, Jie Huang, Klaus Woelk

Electrical and Computer Engineering Faculty Research & Creative Works

Porous-wall hollow glass microspheres (PWHGMs) are a novel form of glass materials that consist of 1-μm-thick porous silica shells, 20-100 μm in diameter, with a hollow cavity in the center. Utilizing the central cavity for material storage and the porous walls for controlled release is a unique combination that renders PWHGMs a superior vehicle for targeted drug delivery. In this study, NMR spectroscopy was used to characterize PWHGMs for the first time. A vacuum-based loading system was developed to load PWHGMs with various compounds followed by a washing procedure that uses solvents immiscible with the target material. Immiscible binary model …

Utah Salt Storage Facilities Guidelines And Best Management Practices, Weston Bellon

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

An environmental analysis was conducted at the Utah Water Research Laboratory of samples gathered from Utah Department of Transportation (UDOT) salt storage facilities retention ponds across the state. The analysis indicated high levels of TSS largely made up of minerals directly associated with the deicing solution currently used by UDOT in roadway applications. As a companion to that analysis, best management practices have been identified and compiled to provide a resource for the proper management of salt storage facilities in the state of Utah. Topics included as best management practices include locating new storage facilities, proper salt storage, proper salt …

Research And Development Of Powder Brazing Filler Metals For Diamond Tools: A Review, Fei Long, Peng He, Dusan P. Sekulic

Mechanical Engineering Faculty Publications

Powder brazing filler metals (PBFMs) feature a number of comparative advantages. Among others, these include a low energy consumption, an accurate dosage, a good brazeability, a short production time, and a high production efficiency. These filler metals have been used in the aerospace, automobile, and electric appliances industries. The PBFMs are especially suitable for diamond tools bonding, which involves complex workpiece shapes and requires accurate dosage. The recent research of PBFMs for diamond tools is reviewed in this paper. The current applications are discussed. The CuSnTi and Ni-Cr-based PBFMs have been the two commonly used monolayer PBFMs. Thus, the bonding …

Study Of Near-Cup Droplet Breakup Of An Automative Electrostatic Rotary Bell (Esrb) Atomizer Using High-Speed Shadowgraph Imaging, Jacob E. Wilson, Stephen William Grib, Adnan Darwish Ahmad, Michael W. Renfro, Scott A. Adams, Ahmad Salaimeh

Mechanical Engineering Faculty Publications

Electrostatic Rotary bell (ESRB) atomizers are used as the dominant means of paint application by the automotive industry. They utilize the high rotational speed of a cup to induce primary atomization of a liquid along with shaping air to provide secondary atomization and transport. In order to better understand the fluid breakup mechanisms involved in this process, high-speed shadowgraph imaging was used to visualize the edge of a serrated rotary bell at speeds varying between 5000 and 12,000 RPM and with a water flow rate of 250 ccm. A multi-step image processing algorithm was developed to differentiate between ligaments and …

Geoscan-M Use At Ma’Aden Phosphate Al Jalamid Mine, Saudi Arabia, Luke Balzan, Zoran Bauk, Andrew Harris

Beneficiation of Phosphates VIII

Access to real-time data is critical for process control. Scantech’s GEOSCAN-M elemental analyser has been utilized in the minerals industry for the past two decades in a range of different commodities. Already established for use in the coal and cement industries, commodities such as iron ore, copper, lead zinc, manganese, bauxite and lithium have benefited from the real-time access to elemental composition data on conveyed flows provided by the GEOSCAN. The phosphate industry has also recognized the benefits of the equipment and a number of operators and companies have installed GEOSCANs to provide real-time analysis back to the plant.

A …

The Santa Clara, 2018-05-03, Santa Clara University

The Santa Clara

No abstract provided.

Can Your P2o5 Be Commercially Exploited?, Ewan Wingate, Michael E. Kelahan, M. Robert Kelahan

Beneficiation of Phosphates VIII

World reserves of high-grade, high-quality phosphate rock are steadily decreasing. As a result, lower quality rock is being increasingly evaluated to determine its potential for commercial exploitation. It is well known that the chemical and mineralogical composition of phosphate rock varies widely from deposit to deposit, and therefore, the conditions for processing different phosphate rock types also varies.

Unfortunately, most early stage phosphate feasibility studies tend to focus on the P₂O₅ content and neglect the other chemical constituents or impurities in the rock. It is the remainder of the chemical constituents that often define the quality of …

Milling Of The Phosphate Rock Flotation Circuit Circulating Load Aiming Production Increase And Iron Content Reduction In The Final Concentrate, André Carlos Silva, Michelle Fernanda De Lira Teixeira, Anastácio Honório De Melo Filho, Thiago Drumond De Alvarez De Araújo, Maurício José De Oliveira Júnior, Wanderson Ferreira Borges Júnior, Bruno Palhares Milanezi, Jailson Pinto Cardoso

Beneficiation of Phosphates VIII

Phosphorus has its main application in the production of phosphoric acid, being the apatite series its main ore. The Brazilian main phosphorus reserves are igneous, as is the case of Catalão alkaline dome, were Copebras/CMOC International has operations. The content of P₂O₅ in the ROM has been reduced over the years and, as a consequence, the content of the contaminants in the concentrate, produced by flotation, which enhances the difficulty in the phosphoric acid production. Only traces of arsenic, iron, and heavy metals can be present in high-purity phosphoric acid. The circulating load of the Copebras’ phosphate …

Revisiting The Merseburg Process: Economic Opportunity And Environmental Benefit?, Gary Albarelli

Beneficiation of Phosphates VIII

The process for manufacture of ammonium sulfate from gypsum, known as the Merseburg Process, named for the town in Germany where it was developed, has been commercially produced in plants in Austria, India, Pakistan and the United Kingdom in the past. It is based on reacting ammonia and carbon dioxide to produce ammonium carbonate, which is then reacted with gypsum to produce ammonium sulfate and calcium carbonate. Ammonium sulfate is mainly used as direct fertilizer or in producing compound fertilizers. The global ammonium sulfate market is projected to grow 4% annually through 2025, from $4.6 billion to $6.8 billion. As …

Influence Of The Impeller Speed On Phosphate Rock Flotation, André Carlos Silva, Elenice Maria Schons Silva, Fernanda Santos Andrade

Beneficiation of Phosphates VIII

Flotation represents, at present, the technology capable of efficiently concentrate the minerals of interest, separating them from other gangue minerals. The flotation process is based on interactions between minerals (solid phase), water (liquid phase), and air (gas phase). However, it depends on physical forces driving the system. If mineral particles do not have enough momentum during the collision with the air bubble no attachment between them occurs, and consequently no flotation. Impeller rotation speed is undoubtedly a factor that changes the hydrodynamic conditions of the flotation system playing a vital role on it. It supplies the flotation system with air …

Latest Trend For Fluorine In The Phosphoric Industry: Absorption Efficiency Improvement, Conversion Into Raw Material, Tibaut Theys

Beneficiation of Phosphates VIII

Almost all the phosphate apatite used in the world to produce phosphoric acid trough the wet process contains fluorine. When not properly controlled, this element creates process, health and environmental issues that can have dramatic impact. In recent year several technologies have been established or improved to tackle these challenges.

F absorption has been improved by simple changes that ensure a high efficiency while minimizing the CAPEX.

F usage has also been largely investigated to produce valuable product as AlF3 or HF but also easy to transport raw material as CaF2. This paper will describe some recent development related to …

Analysis Of Surface Integrity In Machining Of Aisi 304 Stainless Steel Under Various Cooling And Cutting Conditions, F. Klocke, B. Döbbeler, S. Lung, S. Seelbach, Ibrahim S. Jawahir

Institute for Sustainable Manufacturing Faculty Publications

Recent studies have shown that machining under specific cooling and cutting conditions can be used to induce a nanocrystalline surface layer in the workspiece. This layer has beneficial properties, such as improved fatigue strength, wear resistance and tribological behavior. In machining, a promising approach for achieving grain refinement in the surface layer is the application of cryogenic cooling. The aim is to use the last step of the machining operation to induce the desired surface quality to save time-consuming and expensive post machining surface treatments. The material used in this study was AISI 304 stainless steel. This austenitic steel suffers …

Using Augmented Reality In Engineering Education, Juan Estrella

Publications and Research

Augmented Reality is an interactive mixture between the real world and computerized images that capture the audience’s attention. Devices that support augmented reality improve the image of the real-world surroundings with simulated physical input such as sound, video, or graphics overlaid on top of the real-world view. In recent years, augmented reality has improved beyond expensive military applications and has now entered a wide variety of domains. In engineering education, AR technologies can serve as a learning aid as well as a basis for innovation. The technology provides 3-D visualizations that allow to: (i) observe flaws in designs before the …

Security Attacks On Reckless-Apps: "Remote Car Keyless Applications" For New Semi Autonomous Vehicles, Mohamed El-Tawab

Masters Theses, 2010-2019

Rapid technological advancements of vehicle manufacturing and the modern wireless technology opens the door for several new Intelligent Transportation applications. Remote Keyless system in vehicles is considered one of the famous applications that has been developed recently, which is susceptible to many cyberattacks. Remote Keyless applications on smartphones were developed in the past few years to perform the functionality of keyless fob and are expected to replace the physical keyless fobs in the next few years, which can open the door to many cyberattacks. In this research, we implemented a simulation that represents the REmote Car KeyLESS Applications (RECKLESS-apps) on …

U.S. Agro-Climate In 20th Century: Growing Degree Days, First And Last Frost, Growing Season Length, And Impacts On Crop Yields, Meetpal Singh Kukal, Suat Irmak

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Significant air temperature changes have occurred globally during the 20th century, which are spatially variable to a considerable degree and these changes can have substantial implications in agroecosystem productivity. The agroclimate indicators that are responsible in these contexts are first fall frost (FFF), last spring frost (LSF), climatological growing season (CGS) length, and heat accumulation (growing degree days, GDD). We explore spatial and temporal trends associated with these indices across the continental U.S. (CONUS) during 1900–2014 using datasets collected at 1218 sites. On average, FFF has been occurring later (by 5.4 days century⁻¹), and LSF has been occurring …

Mechanical Reinforcement Of Polyacrylamide Hydrogels Using Pristine Single-Walled Carbon Nanotubes, Wuxiang Feng

Graduate Dissertations and Theses

Hydrogels have great promise as an innovative biomedical material possessing many advantages such as high water content, porous structure, and excellent biocompatibility. Although hydrogels have been used to develop some successful applications, they commonly do not have sufficient mechanical strength required for artificial soft tissues. Here, the author fabricated reinforced PAAm hydrogels using single-walled carbon nanotubes as reinforcing materials. The fusion of SWCNTs and the PAAm matrix successfully generated SWCNTs/PAAm hybrid gels with improved mechanical strength. Moreover, the aqueous dispersion of SWCNTs used for engineering the hybrid gels remained excellent stability after two months. SEM images from previous research and …

Solar And Rain Catching Canopy. Urban Oasis, Afolabi Ibitoye, Langston Clark, Elena Zimareva, Evan Banks, Alexander Aptekar

Publications and Research

The Urban Oasis is designed to work within existing “pocket parks” in New York City as a combined rainwater collector, personal electronics charging station and resting designation for New Yorkers. Intended to not only lessen the demand on the city power grid by using renewable energy to charge devices, the urban oasis is also intended to mitigate grey water overfill in New York’s combined sewer system and, in general, serve as a model for responsible environmental stewardship in urban areas.

The important technical aspects of the canopy specifically analyzed were:

a) how much rainwater could the canopy be expected to …

Bond-Type Cfrp Anchorage System For Prestressed Concrete Applications, Yasir Saeed, Franz Rad, Salam Al-Obaidi

Student Research Symposium

High tensile strength, adjustable and high modulus of elasticity, high strength-to-weight ratio, and non-corrosiveness are great features which have made Fiber Reinforced Polymer (FRP) very attractive to engineers. Prestressed concrete applications require high strength prestressing material that could apply and maintain effective compressive force to concrete members. Although FRPs, especially Carbon FRP (CFRP), have the desired strength, no efficient system for its anchorage to concrete has been devised yet. This paper presents an experimental evaluation on new bond-type CFRP anchors. A total of eleven samples were prepared and tested. The CFRP rods were 0.375 in. and 0.50 in. diameter. The …