Engineering Commons^™

Investigation Of The Relationship Between The Condensed Structure And The Chemically Bonded Water Content In The Network Of Geopolymer Cements, Herve Tchakoute Kouamo, Sorelle J. K. Melele, Claus H. Rüscher, Elie Kamseu, Cristina Leonelli

Alkali Activated Materials and Geopolymers: Versatile Materials Offering High Performance and Low Emissions

The main objective of this work was to investigate the relationship between the condensed structure and the chemically bonded water content in the metakaolin-based geopolymer network. The kaolinite clay used in this work as an aluminosilicate source was transformed to metakaolin by calcination at 700 °C. The powder of the waste glass and the silica fume were used as silica sources for the synthesis of the hardeners. The obtained hardeners were characterized by infrared spectroscopy and MAS-NMR ²⁹Si. The metakaolin and the hardeners were used for producing geopolymers cements. The synthesized products were characterized by X-ray diffractometry, infrared spectroscopy, …

Selective Flocculation Separation Of Fine Hematite From Quartz Using A Novel Grafted Copolymer Flocculant, Jinxia Zhang, Weiguang Sun, Zhiyong Gao, Fusheng Niu, Long Wang, Yawei Zhao, Yuesheng Gao

Michigan Tech Publications, Part 1

Beneficiation of ultrafine mineral particles (typically with an average size less than 20 µm) remains a critical problem for the mineral processing industry. Selective flocculation technique has been found to show great potential to tackle this problem, whose success mainly depends on the selective adsorption of a flocculant on the target mineral particles. In this work, a novel copolymer flocculant was synthesized by grafting starch and acrylamide, which for the first time, was employed in the flocculation separation of fine hematite from quartz. The composites of the grafted copolymer flocculant (GCF) were characterized by Fourier transform infrared spectroscopy (FTIR) and …

Fracture Initiation In A Transversely Isotropic Solid: Transient Three Dimensional Analysis, Louis Milton Brock

Mechanical Engineering Faculty Publications

A transversely isotropic solid is at rest, and contains a semi-infinite, plane crack. The axis of rotational material symmetry lies in the crack plane. Application of normal point forces to each face of the crack causes transient 3D growth. The related problem of discontinuities in displacement and traction that exist on regions that exhibit dynamic similarity is first considered. Analytic results are obtained in integral transform space. These lead to equations of the Wiener–Hopf type for the fracture problem. Analytic solutions are again obtained and, upon inversion, subjected to a dynamic energy release rate criterion that includes kinetic energy. A …

Analcime Geopolymers As Sorbents In Water Treatment, Hanna Runtti, Sari Tuomikoski, Janne Pesonen

Alkali Activated Materials and Geopolymers: Versatile Materials Offering High Performance and Low Emissions

Zeolite mineral, analcime [Na₁₆(Al₁₆Si₃₂O₉₆)·16H₂O], is formed in mining industry as lithium carbonate is produced from spodumene (LiAlSi₂O₆) using sodium pressure leaching process (1). Zeolite structure possess aluminosilicate framework and pores occupied by water and exchangeable cations (2). Zeolites act as cation exchangers due to which they have been applied as sorbents in water treatment (2). Geopolymers (GP) consist of an anionic framework of corner-sharing SiO₄ and AlO₄, and the exchangeable cations are located in the voids in the same way as in zeolites …

Performance Evaluation Of Metakaolin Clay Geopolymers Synthesised With Bamboo Wood Ash As An Activator, Mary B. Ogundiran, Olalekan P. Akinola

Alkali Activated Materials and Geopolymers: Versatile Materials Offering High Performance and Low Emissions

Global concern about substantial CO₂ emissions during manufacturing of Portland cement has led to studies on alternative low cost green binders. Geopolymer, an inorganic binder, which is produced from reaction of an alkaline activator and aluminosilicate mineral is receiving attention as an alternative cementitious material. However, one of the drawbacks of geopolymer production is the cost of chemical activators used in its synthesis. Studies are scanty on the use of Bamboo Wood Ash (BWA) as a less expensive alternative biomass ash activator in the synthesis of metakaolin clay geopolymers. Possibility of replacing a part of the alkaline commercial activator …

Investigation On Microstructure And Mechanical Properties Of Fa/Ggbs -Based Geopolymer After Exposure At Elevated Temperature, Apriany Saludung, Yuko Ogawa, Kenji Kawai

Alkali Activated Materials and Geopolymers: Versatile Materials Offering High Performance and Low Emissions

Fly ash (FA) and ground granulated blast -furnace slag (GGBS) are industrial wastes and have been widely utilized as construction material due to the environmental impacts. The use of these by-products is not only for the sustainable construction but also for reducing the emission of CO₂ due to the use of Portland cement. This study presents the microstructure and mechanical properties of geopolymer paste made from different ratios of low -calcium FA and GGBS after exposure at elevated temperature (500- 950^oC). Compressive strength tests for both heated and unheated cylindrical specimens (using 50 mm x 100 mm …

Geopolymers Including Cdw For Application As A Building Material, Matteo Panizza, Marco Natali, Adriana Bernardi, Matteo Panizza, Enrico Garbin, Michele Secco, Vilma Ducman

Alkali Activated Materials and Geopolymers: Versatile Materials Offering High Performance and Low Emissions

No abstract provided.

Conference Program, John L. Provis, Waltraud M. Kriven, Cristina Leonelli, Aldo Boccaccini, Arie Van Riessen

Alkali Activated Materials and Geopolymers: Versatile Materials Offering High Performance and Low Emissions

No abstract provided.

Fault Identification And Location For Distribution Network With Distributed Generations, Wen Fan, Yuan Liao

Electrical and Computer Engineering Faculty Publications

Power distribution networks with distributed generations may experience faults. It is essential to promptly locate the fault for fast repair and restoration. This paper presents a novel method for identifying the faulted section and accurate location of faults that occur on power distribution grid. Appropriate matrices are set up to represent meter locations on the grid and the topology of the grid. The voltage and current measurements obtained are utilized to decide the fault sections. Then fault location is determined by solving equations that link measurements and fault locations through bus impedance matrix. The method is applicable to both single …

Computer Science Master’S Graduate Chronicles Her Journey At Usu | College Of Engineering, Usu College Of Engineering

College of Engineering News

Mounika Arukala joined the master’s of computer science program at Utah State University in August 2016.

Applications Of Complex Network Analysis In Electric Power Systems, Mahmoud Saleh, Yusef Esa, Ahmed Mohamed

Publications and Research

This paper provides a review of the research conducted on complex network analysis (CNA) in electric power systems. Moreover, a new approach is presented to find optimal locations for microgrids (MGs) in electric distribution systems (EDS) utilizing complex network analysis. The optimal placement in this paper points to the location that will result in enhanced grid resilience, reduced power losses and line loading, better voltage stability, and a supply to critical loads during a blackout. The criteria used to point out the optimal placement of the MGs were predicated on the centrality analysis selected from the complex network theory, the …

Can The Application Of The Visual Programme Tool Dynamo Assist In Streamlining Current Cobie Requirements For Design Professionals, Bim Tudublin, Richard Kenna

Capstone Reports

information exchange (COBie) is still a misunderstood and miscommunicated topic. Despite the free distribution of supporting information, many errors remain in its practical application. This study explores strengthening COBie design practices, reducing computational expense by data automation and streamlining the workflow process without the need for designer’s total immersion into COBie theory. Synergies between Autodesk Revit and Dynamo BIM were the chosen software utilised to achieve such a goal. A literature review is first employed to provide a current overview from academic and industry sources, with the principles of design science the chosen methodology in the development, implementation and evaluation …

Performance Evaluation Of Energy-Autonomous Sensors Using Power-Harvesting Beacons For Environmental Monitoring In Internet Of Things (Iot), George Dan Moiş, Teodora Sanislav, Silviu Corneliu Folea, Sherali Zeadally

Information Science Faculty Publications

Environmental conditions and air quality monitoring have become crucial today due to the undeniable changes of the climate and accelerated urbanization. To efficiently monitor environmental parameters such as temperature, humidity, and the levels of pollutants, such as fine particulate matter (PM2.5) and volatile organic compounds (VOCs) in the air, and to collect data covering vast geographical areas, the development of cheap energy-autonomous sensors for large scale deployment and fine-grained data acquisition is required. Rapid advances in electronics and communication technologies along with the emergence of paradigms such as Cyber-Physical Systems (CPSs) and the Internet of Things (IoT) have led to …

Synthesis-Structure-Activity Relationships In Co3o4 Catalyzed Co Oxidation, Kathleen Mingle, Jochen A. Lauterbach

Faculty Publications

In this work, a statistical design and analysis platform was used to develop cobalt oxide based oxidation catalysts prepared via one pot metal salt reduction. An emphasis was placed upon understanding the effects of synthesis conditions, such as heating regimen and Co2+ concentration on the metal salt reduction mechanism, the resultant nanomaterial properties (i.e., size, crystal structure, and crystal faceting), and the catalytic activity in CO oxidation. This was accomplished by carrying out XRD, TEM, and FTIR studies on synthesis intermediates and products. Additionally, high-throughput experimentation was employed to study the performance of Co3O4 oxidation catalysts over a wide range …

Assessing Subjectivity In Environmental Sensor Data Post Processing Via A Controlled Experiment, Amber Spackman Jones, Jeffery S. Horsburgh, David P. Eiriksson

Publications

Collection of high resolution, in situ data using environmental sensors is common in hydrology and other environmental science domains. Sensors are subject to drift, fouling, and other factors that can affect the quality of the measurements and their subsequent use for scientific analyses. The process by which sensor data are reviewed to verify validity often requires making edits in post processing to generate approved datasets. This quality control process involves decisions by technicians, data managers, or data users on how to handle problematic data. In this study, an experiment was designed and conducted where multiple participants performed quality control post …

Hydrotreating Of Guaiacol: A Comparative Study Of Red Mud-Supported Nickel And Commercial Ni/Sio2-Al2o3 Catalysts, Hossein Jahromi, Foster Agblevor

Biological Engineering Faculty Publications

Upgrading of bio-oil through catalytic hydrotreating was investigated with guaiacol as a model compound. A nickel supported on red mud (Ni/RM) hydrotreating catalyst was developed and compared to the standard Ni/SiO₂-Al₂O₃ catalysts under similar experimental conditions. The Ni/RM catalyst was characterized by inductively coupled plasma atomic emission spectrometry (ICP-AES), X-ray diffraction analysis (XRD), scanning electron microscopy (SEM), BET specific surface area, and temperature programmed reduction (TPR). The effects of reaction temperature (300, 350, 400 °C) and initial hydrogen pressure (4.83 MPa (700 psi), 5.52 MPa (800 psi), and 6.21 MPa (900 psi)) on products distribution …

New Insights Into The Glycosylation Steps In The Biosynthesis Of Sch47554 And Sch47555, Ozkan Fidan, Riming Yan, Gabrielle Gladstone, Tong Zhou, Du Zhu, Jixun Zhan

Biological Engineering Faculty Publications

Sch47554 and Sch47555 are antifungal compounds from Streptomyces sp. SCC‐2136. The availability of the biosynthetic gene cluster made it possible to track genes that encode biosynthetic enzymes responsible for the structural features of these two angucyclines. Sugar moieties play important roles in the biological activities of many natural products. An investigation into glycosyltransferases (GTs) might potentially help to diversify pharmaceutically significant drugs through combinatorial biosynthesis. Sequence analysis indicates that SchS7 is a putative C‐GT, whereas SchS9 and SchS10 are proposed to be O‐GTs. In this study, the roles of these three GTs in the biosynthesis of Sch47554 and Sch47555 are …

A Survey Of Ride-Hailing Passengers, Steven Gehrke

PSU Transportation Seminars

In less than a decade, the ride-hailing industry, led by Uber and Lyft, has dramatically transformed the way we travel in our metro regions. Rider adoption of these on-demand mobility services has proceeded much quicker than our understanding of their impacts to our urban transportation systems. Planning for this transformation in personal mobility, which will have unintended consequences, has been made more difficult by the scarcity in meaningful data made available by these ride-hailing companies. Public agencies responsible for managing congestion and transit services are hindered in their ability to successfully plan for the integration of this emergent travel mode …

An Evaluation Of Pit Latrines And User Perception Of Excrement In Ngäbe Communities In Panama, James A. Libby

USF Tampa Graduate Theses and Dissertations

At the end of the Millennium Development Goal (MDG) period in 2015, 2.3 billion people, 31% of the global population, still did not have access to even basic sanitation services. Of these people, 892 million still practice open defecation, and 856 million people use unimproved facilities such as pit latrines without a slab or platform or hanging latrines or bucket latrines (JMP 2017). Sustainable Development Goal (SDG) Target 6.2 now aims to achieve adequate and equitable sanitation and hygiene for all and sets the ambitious target of eradicating open defecation by 2030. While the number of people open defecating was …

The Santa Clara, 2018-05-24, Santa Clara University

The Santa Clara

No abstract provided.

Stretchable Methyl Ammonium Lead Iodide Perovskite Solar Cells For Photovoltaic And Piezoelectric Energy Harvesting, William Tait

University Scholar Projects

The goal of this work was to fabricate an inverse planar perovskite solar cell (PSC) that was stretchable in one dimension and completely solution-processible. Perovskites are a material that have attracted much attention in recent years due to their appealing characteristics, such as being photovoltaic and piezoelectric. PSCs have been the focus of many studies in the solar cell area, as they are solution-processible and have shown high efficiencies relative to the amount of time they have been studied. Fabricating a PSC on a stretchable substrate would be beneficial, as a bendable, stretchable PSC would likely have more applications than …

An Investigation Of The Cortical Learning Algorithm, Anthony C. Samaritano

Theses and Dissertations

Pattern recognition and machine learning fields have revolutionized countless industries and applications from biometric security to modern industrial assembly lines. The fields continue to accelerate as faster, more efficient processing hardware becomes commercially available. Despite the accelerated growth of the pattern recognition and machine learning fields, computers still are unable to learn, reason, and perform rudimentary tasks that humans and animals find routine. Animals are able to move fluidly, understand their environment, and maximize their chances of survival through adaptation - animals demonstrate intelligence. A primary argument in this thesis that we have not yet achieved a level of intelligence …

Stealth Transmission In Free Space Optical Communication Systems Using Amplified Spontaneous Emission Noise, Youness Ergaibi

Theses and Dissertations

One of the challenging real-world problems in the communication network is to secure the communication system that deals with a large data. Perhaps even a more challenging version of this scenario is when the channel that transmits the information is a wireless media. This thesis introduces a steganography technique to secure the physical layer of the communication system. It enhances the benefits by using optical communication rather than radio frequency (RF) communication, especially in terms of transmitting a large scale of data. This thesis demonstrates that we can transmit secure large information in free space (air) using steganography mechanism and …

Nanoparticle-Mediated Therapeutic Agent Delivery For Treating Metastatic Breast Cancer—Challenges And Opportunities, Yunfei Li, Brock Humphries, Chengfeng Yang, Zhishan Wang

Toxicology and Cancer Biology Faculty Publications

Breast cancer (BC) is the second leading cause of cancer-related death in American women and more than 90% of BC-related death is caused by metastatic BC (MBC). This review stresses the limited success of traditional therapies as well as the use of nanomedicine for treating MBC. Understanding the biological barriers of MBC that nanoparticle in vivo trafficking must overcome could provide valuable new insights for translating nanomedicine from the bench side to the bedside. A view about nanomedicine applied in BC therapy has been summarized with their present status, which is gaining attention in the clinically-applied landscape. The progressions of …

Perovskite Solar Cells Fabricated Via Scalable Dip Coating Methods, Joseph F. Iannello

Theses and Dissertations

Perovskite solar cells present the possibility for less expensive electricity generation, through the use of low cost materials and fabrication methods relative to current silicon-based technology. Many current methods of fabricating thin film perovskite solar cells focus on spin-coating, which inherently lacks scalability due to particle conglomeration, poor uniformity over a larger area, and safety concerns. Dip-coating, an alternative to spin-coating, which is explored here addresses these issues which limit scalability. Each individual layer can be separately synthesized, deposited, and characterized, which leads towards scalability. Choosing only the best results from each independent layer allowed progress to the creation of …

Two-Phase Flow Regime Map For Large Diameter Pipes And High-Velocity Flows, Matheus Sigaki Capovilla

LSU Master's Theses

Worst-case-discharge (WCD) calculations are a pre-requisite for any new well to be drilled in the Gulf of Mexico (GoM). Models that were mostly developed for production rates prediction are currently used to calculate the WCD rate. These models were mostly developed for pipe diameters and flow velocities much smaller than those expected during WCD events. Therefore, these models may be miscalculating WCD rates.

This study aims at analyzing one of possible sources of errors in these models: the flow regime maps. The influence of diameter change on flow regimes is discussed. A thorough literature review is carried out for different …

The Fabrication Of High-Aspect Ratio Gratings For Talbot Interferometer With Medical Imaging Application., Vikaram Singh

LSU Master's Theses

X-ray Phase contrast-based Talbot interferometer creates high contrast between weak and strong absorbing materials, which makes it effective in imaging soft tissues. However, its performance is bounded by the aspect-ratio, features and symmetry of its gratings. For 40 KeV energy X-rays, the analyzer grating thickness should be 100 µm or more to achieve > 90% absorption in order to obtain high contrast images. Moreover, the smaller period in grating is desired for higher resolution. Therefore, researchers are exploring various fabrication techniques to achieve greater aspect-ratio gratings. Utilizing modern LIGA techniques, the aspect-ratio of gratings can be improved with a simplified …

Non-Mpm Mode Coding For Intra Prediction In Video Coding, Taru Kanchan

Computer Science and Engineering Master's Theses

The High Efficiency Video Coding standard introduced thirty-five intra prediction modes. It employed a method based on three most probable modes (MPM) to improve intra mode coding. This method significantly improved the performance by extracting three MPMs out of the thirty-five intra modes. The Joint Video Exploration Team (JVET) defines sixty-seven intra prediction modes for a possible future video coding standard. In the latest JVET development, six MPMs are chosen, and the remaining sixty-one modes are divided into sixteen “selected” and forty-five “non-selected” modes. These non-MPM modes are coded using fixed length coding. This research focusses on finding more efficient …

Analyzing A Small-Scale, Constructed Wetland For Stormwater Treatment, Juliann Apple, Pascal Schlee

Rose-Hulman Undergraduate Research Publications

Stormwater treatment by means of constructed wetlands has the ability to effectively remove pollutants such as total suspended solids, nitrite, nitrate, and ammonia. Utilizing two small, lab-scale constructed wetlands, one free water flow system and one subsurface flow system, our research team analyzed the levels of these pollutants at different locations in the wetland. Our team of two Civil and Environmental Engineering undergraduate students tested a variety of different water samples including tap water, stormwater, and a high nitrate solution. A consistent decrease in nitrate and nitrite was observed throughout the systems. While there was not an overall decrease in …

The Effect Of Cellulose Nanocrystals On Latex And Adhesive Properties In Emulsion- Based Polymer Nanocomposites, Marc A. Dubé, Emily D. Cranston, Carole Fraschini, Richard Berry

Polymer Reaction Engineering X (PRE 10) (2018)

Pressure sensitive adhesives (PSAs) adhere quickly and firmly to surfaces with the application of light pressure, and can be removed without leaving a residue. Their mechanical performance is measured by tack, peel strength and shear strength. A balanced combination between the three mechanical performance measurements depends on the specific end-use application and is challenging to achieve. This is particularly so when replacing solvent-based technologies with more sustainable, water-based (i.e., emulsion polymerization) technologies. PSAs synthesized using emulsion polymerization tend to have a lower shear strength due to poor gel network formation. As a result, conventional emulsion-based PSAs suffer from the inability …