Engineering Commons^™

Communication System For Firefighters, Nicholas Goodpaster, Steven Booth, Griffin Moede, John-Paul Hurley

Computer Science and Engineering Senior Theses

Currently firefighters use two-way radios to communicate on the job, and they are forced to write reports based on their memory because there is not an easy way to record the communications between two-way radios. Firefighters need a system to automatically document what happened while they were responding to a call. To save them a significant amount of time when creating reports, our solution is to implement an application that allows firefighters to take pictures, record video and communicate in real time with their team of on-site responders. The proposed system will use a Wireless Local Area Network (WLAN) hosted …

Recent Trends In The Frequency And Duration Of Global Floods, Nasser Najibi, Naresh Devineni

Publications and Research

Frequency and duration of floods are analyzed using the global flood database of the Dartmouth Flood Observatory (DFO) to explore evidence of trends during 1985–2015 at global and latitudinal scales. Three classes of flood duration (i.e., short: 1–7, moderate: 8–20, and long: 21 days and above) are also considered for this analysis. The nonparametric Mann–Kendall trend analysis is used to evaluate three hypotheses addressing potential monotonic trends in the frequency of flood, moments of duration, and frequency of specific flood duration types. We also evaluated if trends could be related to large-scale atmospheric teleconnections using a generalized linear model framework. …

Uat Ads-B Data Anomalies And The Effect Of Flight Parameters On Dropout Occurrences, Asma Tabassum, William Semke

Mechanical Engineering Faculty Publications

An analysis of the performance of automatic dependent surveillance-broadcast (ADS-B) data received from the Grand Forks, North Dakota International Airport was carried out in this study. The purpose was to understand the vulnerabilities of the universal access transceiver (UAT) ADS-B system and recognize the effects on present and future air traffic control (ATC) operation. The Federal Aviation Administration (FAA) mandated all the general aviation aircraft to be equipped with ADS-B. The aircraft flying within United States and below the transition altitude (18,000 feet) are more likely to install a UAT ADS-B. At present, unmanned aircraft systems (UAS) and autonomous air …

Message From The Program Chairs - Volume 1, Jiannong Cao, Stelvio Cimato, Yasuo Okabe, Sahra Sedighsarvestani

Electrical and Computer Engineering Faculty Research & Creative Works

No abstract provided.

Wind Turbine Design: Analysis And Experimentation Of Electro-Magnetic Alternator Design, Mark Hans Ewald Steinke

Honors Projects

This article explores the alternator designs for small scale wind turbines and the aspects that affect the performance of these alternators. It explores the design and testing process used to quantify, visualize, and understand the relationship between the wind turbine stator design and the performance. Additionally, the paper analyzes the data collection method using a test jig powered by a hydraulic motor set up by previous groups of students and the data intended to be collected using actual field tests on Whidbey Island located at Camp Casey. These tests were intended to identify favorable combinations of alternators and blades. However, …

Formation Control Of Nonholonomic Multi-Agent Systems, Milad Khaledyan

LSU Doctoral Dissertations

This dissertation is concerned with the formation control problem of multiple agents modeled as nonholonomic wheeled mobile robots. Both kinematic and dynamic robot models are considered. Solutions are presented for a class of formation problems that include formation, maneuvering, and flocking. Graph theory and nonlinear systems theory are the key tools used in the design and stability analysis of the proposed control schemes. Simulation and/or experimental results are presented to illustrate the performance of the controllers.

In the first part, we present a leader-follower type solution to the formation maneuvering problem. The solution is based on the graph that models …

Medical Perspective Articles To Stimulate The Field For Needs-Finding, Brian W. Pogue

Dartmouth Scholarship

This editorial by the journal's Editor in Chief, Brian Pogue, explains the need for a new type of paper.

Performance Of Carbon Aerogel/Fiber Paper As Capacitive Deionization Electrodes Under Variable Operating Conditions, Md Ashique Ahmed, Sanjay Tewari

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The capacitive deionization has garnered renewed interested with recent modifications resulting in efficient (energy and cost) alternatives to desalinate brackish water (salt concentration less than 10 g/L). Recent research efforts, to improve the technology, have been focused mainly on electrode material development and modifications of operational parameters for optimized performance. This research is focused on performance evaluation of carbon aerogel/fiber paper as capacitive deionization electrodes under variable operating conditions. The main operational parameters that were varied are applied voltage, influent temperature and initial concentration. The highest adsorption capacity achieved in this on-going study is 4.61 mg/g at 33.5 oC with …

Master Of Science In Computer Science, Nova Southeastern University

College of Engineering and Computing Course Catalogs

No abstract provided.

Master In Management Information Systems, Nova Southeastern University

College of Engineering and Computing Course Catalogs

No abstract provided.

The Pocketqube Standard: Issue 1, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A report titled "The PocketQube Standard Issue 1" published on June 7, 2018.

Oxidation Of N-Doped Multiwalled Carbon Nanotubes And Formation Of Discontinuous Spiraled Carbon Nanoribbons, Aman Preet Kaur, Mark S. Meier, Rodney Andrews, Dali Qian

Chemistry Faculty Publications

The effects of five commonly used wet chemical oxidations were studied for the extent of oxidation of graphitized nitrogen-doped multiwalled carbon nanotubes (N-MWCNTs). KMnO₄/ H₂SO₄ was the most potent oxidant, as it produced the highest fraction of oxygen-containing functional groups. Electron microscopy studies showed that the treatment of annealed N-MWCNTs (G-N-MWCNTs) with H₂SO₄/HNO₃ and H₂SO₄/KMnO₄ mixtures leads to interesting spiraled ribbon textures. A structural model, involving the stacking of coiled subunits to form a discontinuous carbon nanoribbon rather than a continuous ribbon is proposed to …

Foreword Special Section On Electrical Contacts, Ronald A. Coutu Jr., Ravi Mahajan

Electrical and Computer Engineering Faculty Research and Publications

Welcome to the Special Topics Section dedicated to the 2016 Holm Conference on Electrical Contacts. This special section contains eight high-quality papers that comprehensively describe the state of the art and potential future directions for topics of great interest to our readers. The Editor-in-Chief (EIC), in consultation with the other EICs, Associate Editors (AEs), and domain experts, selects the topics for the special sections, and a Guest Editor or AE (GE/AE), who is a leading expert in the technical area, then directs the solicitation and peer review of the papers. In cases where the GE/AE is also an author, the …

Investigation Of Energy Impacts Of Whole-House Ducted Dehumidifier Location, Florida Solar Energy Center, Charles Withers, Jr.

FSEC Energy Research Center®

This report discusses energy impacts related to how ducted dehumidifier ducts are configured as well as where they are located. Lab controlled testing evaluated three different duct configurations. The three DHU lab test configurations were: 1) DHU air ducted directly from/to room, 2) DHU ducted from/to the central air return duct, and 3) DHU from/to the central air supply duct. Simulation effort evaluated conductive energy gains/losses through dehumidifier and its ducts for 1) conditioned space, 2) attic, and garage locations.

Minimum Required Length For Geotechnical Lateral Stability Of Rocksocketed Pile Shafts, Arash Khosravifar, Zia Zafir

Civil and Environmental Engineering Faculty Publications and Presentations

The original strong-rock (SR) p-y curves for rock-socketed shafts exhibit a brittle response where the post-peak resistance drops to approximately zero. This brittle response could result in a progressive failure of the rock p-y curves which, in turn, results in excessive pile lengths. This paper proposes a modification to the strong-rock (SR) p-y curves where the post-peak residual strength is equal to 20% of the ultimate resistance (0.2*pult). This residual resistance is proposed based on the assumption that the lateral resistance of cracked rock (after the peak point) should not be smaller than the lateral resistance of heavily weathered rock …

Modeling And Simulation Of Mass Flow Of Steel Plate/Slab During Hot Rolling, X. Wang, S. Ganguly, K. Chandrashekhara, Mario F. Buchely, Semen Naumovich Lekakh, David C. Van Aken, Ronald J. O'Malley, D. Bai, Y. Wang, T. Natarajan

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The ability to predict mass flow behavior during hot rolling is essential to product quality. In this study, viscoplastic models of the steels from SSAB and U.S. Steel were developed based on experimental stress-strain curves. A three-dimensional nonlinear finite element model was built to simulate a reverse plate hot rolling and a hot strip rolling process. For plate rolling, a seven pass schedule was simulated. The plastic strain distributions during rolling were investigated. The results show that the surface of the plate has larger plastic strain than the center. In the case of hot strip rolling, the simulation predicts that …

New Approaches For Memristive Logic Computations, Muayad Jaafar Aljafar

Dissertations and Theses

Over the past five decades, exponential advances in device integration in microelectronics for memory and computation applications have been observed. These advances are closely related to miniaturization in integrated circuit technologies. However, this miniaturization is reaching the physical limit (i.e., the end of Moore's Law). This miniaturization is also causing a dramatic problem of heat dissipation in integrated circuits. Additionally, approaching the physical limit of semiconductor devices in fabrication process increases the delay of moving data between computing and memory units hence decreasing the performance. The market requirements for faster computers with lower power consumption can be addressed by new …

Flexural Strength, Ductility, And Serviceability Of Beams That Contain High-Strength Steel Reinforcement And High-Grade Concrete, Anas Yosefani

Dissertations and Theses

Utilizing the higher capacity steel in design can provide additional advantages to the concrete construction industry including a reduction of congestion, improved concrete placement, reduction in the required reinforcement and cross sections which would lead to savings in materials, shipping, and placement costs. Using high-strength reinforcement is expected to impact the design provisions of ACI 318 code and other related codes.

The Applied Technology Council (ATC-115) report "Roadmap for the Use of High-Strength Reinforcement in Reinforced Concrete Design" has identified key design issues that are affected by the use of high-strength reinforcement. Also, ACI ITG-6, "Design Guide for the Use …

New Algorithms For Compressed Sensing Of Mri: Wtwts, Dwts, Wdwts, Srivarna Settisara Janney

Master of Science in Computer Science Theses

Magnetic resonance imaging (MRI) is one of the most accurate imaging techniques that can be used to detect several diseases, where other imaging methodologies fail. MRI data takes a longer time to capture. This is a pain taking process for the patients to remain still while the data is being captured. This is also hard for the doctor as well because if the images are not captured correctly then it will lead to wrong diagnoses of illness that might put the patients lives in danger. Since long scanning time is one of most serious drawback of the MRI modality, reducing …

Rotation Of Two-Petal Laser Beams In The Near Field Of A Spiral Microaxicon, S. S. Stafeev, Liam O'Faolain, M. V. Kotlyar

Cappa Publications

Using a spiral microaxicon with the topological charge 2 and NA = 0.6 operating at a 532-nm wavelength and fabricated by electron-beam lithography, we experimentally demonstrate the rotation of a two-petal laser beam in the near field (several micrometers away from the axicon surface). The estimated rotation rate is 55 °/mm and linearly dependent on the on-axis distance, with the theoretical rotation rate being 53 °/mm. The experimentally measured rotation rate is found to be linear and coincident with the simulation results only on the on-axis segment from 1.5 to 3 mm. The experimentally measured rotation rate is 66 °/mm …

Musical Casual Creator For Easy Self-Expression, Louis Lin, Ian Santillano

Computer Science and Engineering Senior Theses

People with autism often struggle with the ability to communicate. As a result, many people with autism become frustrated in their attempts to express their thoughts and feelings fully. Current forms of music therapy are designed to improve the lives of patients with autism, but are inefficient at developing their communication skills. Our project is designed to help music therapy patients express themselves through the creation of music. A patient will be able to “write” a song through the power of his or her feelings. With our system, music therapy patients can actively drive the entire creative process and learn …

Conference Program, Millicent Sullivan, Josué Sznitman, Lola Eniola-Adefeso, Srivatsan Kidambi

Nanotechnology in Medicine II: Bridging Translational in vitro and in vivo Interfaces

No abstract provided.

From Holographic Video Monitors To Optogenetic Probes: How Advancements To Leaky-Mode Modulator Technology Are Saving The World, Stephen Dalton Mclaughlin

Theses and Dissertations

The research presented in this dissertation focuses on improvements made to lithium niobate leaky-mode modulators for both holographic video and optogenetic applications. The specific improvements found herein are: (1) characterization of leaky-mode modulators to decrease driver bandwidth to match that of commodity graphics processing units, (2) the implementation of surface relief gratings as input couplers to replace rutile prism coupling, (3) the addition of backside surface relief gratings to create an orthogonal output face for the leaky-mode modulator, and (4) the creation of superimposed surface relief gratings in lithium niobate to enable multiple wavelength coupling at a single input angle. …

Laser Vaporization And Controlled Condensation (Lvcc) Of Graphene Supported Pd/Fe3o4 Nanoparticles As An Efficient Magnetic Catalysts For Suzuki Cross – Coupling, Hany A. Elazab Dr

Chemical Engineering

Herein, a reproducible, reliable, and efficient method was reported for the synthesis of palladium nanoparticles dispersed on a composite of Fe3O4 and graphene (Pd-Fe3O4/G) as a highly efficient active catalyst for being used in Suzuki cross–coupling reactions. Graphene supported Pd/Fe3O4 nanoparticles (Pd-Fe3O4/G) exhibit a remarkable catalytic performance towards Suzuki coupling reactions. Moreover, the prepared catalyst could be recycled for up to three times with high catalytic activity. The catalyst was prepared using LVCC synthesis; the prepared catalyst is highly magnetic which provides a platform to facilitate the separation process of the catalyst through applying an external magnetic field using a …

Advanced Stress Analysis, Benjamin Liaw

Open Educational Resources

No abstract provided.

Wind Energy And Wind-Energy-Inspired Turbulent Wakes: Modulation Of Structures, Mechanisms And Flow Regimes, Elizabeth H. Camp

Dissertations and Theses

The interaction of turbulent wakes with one another and with the adjacent fluid directly impacts the generation of electricity in wind turbine arrays. Computational modeling is well suited to the repeated iterations of data generation that may be required to inform understanding of the function of wind farms as well as to develop control schemes for plant function. In order to perform such computational studies, a simplified model of the turbine must be implemented. One of the most computationally efficient parametrizations of the blade utilizes a stationary disk which has a prescribed drag and produces a wake. However, since accurate …

Controllable Internal Mixing In Coalescing Droplets Induced By The Solutal Marangoni Convection Of Surfactants With Distinct Headgroup Architectures, Jerome J. Nash, Patrick T. Spicer, Kendra Erk

School of Materials Engineering Faculty Publications

Through several complementary experiments, an investigation of the bulk and interfacial flows that emerged during the coalescence of two water-in-oil droplets with asymmetric compositional properties was performed. By adding surfactant to one of the coalescing droplets and leaving the other surfactant-free, a strong interfacial tension gradient (i.e., solutal Marangoni) driving energy between the merging droplets generated pronounced internal mixing. The contributions of two distinct types of surfactant, anionic ammonium lauryl sulfate (ALS) and cationic cetyltrimethylammonium bromide (CTAB) on the rate of coalescence bridge expansion and on the generation of opposing flows during coalescence were investigated. All coalescence experiments supported the …

College Of Engineering News, Georgia Southern University

College of Engineering & Computing: News & Publications (2010-2023)

• Three GS Students Win WIT Scholarships

Framework Integrating Climate Model, Hydrology, And Water Footprint To Measure The Impact Of Climate Change On Water Scarcity In Lesotho, Africa, John W. Pryor

USF Tampa Graduate Theses and Dissertations

Water scarcity is a problem that will be exacerbated by climate change. Being able to model the effect of climate change on water scarcity is important to effectively plan the use of future water resources. This research integrated the Soil and Water Assessment Tool (SWAT), climate model, and water footprint analysis to measure the impact of climate change on future water scarcity. This was achieved through two objectives. The first objective was to create a modeling framework that links the output from climate model to SWAT and combined streamflow outputs from SWAT with water footprint analysis to measure how climate …

Influence Of Silica Nanoparticle Density And Flow Conditions On Sedimentation, Cell Uptake, And Cytotoxicity, Mostafa Yazdimamaghani, Zachary B. Barber, Seyyed Pouya Hadipour Moghaddam, Hamidreza Ghandehari

Chemical and Biochemical Engineering Faculty Research & Creative Works

Careful evaluation of the toxicological response of engineered nanomaterials (ENMs) as a function of physicochemical properties can aid in the design of safe platforms for biomedical applications including drug delivery. Typically, in vitro ENM cytotoxicity assessments are performed under conventional static cell culture conditions. However, such conditions do not take into account the sedimentation rate of ENMs. Herein, we synthesized four types of similar size silica nanoparticles (SNPs) with modified surface roughness, charge, and density and characterized their cytotoxicity under static and dynamic conditions. Influence of particle density on sedimentation and diffusion velocities were studied by comparing solid dense silica …