Engineering Commons^™

Thermal And Mechanical Properties Of An Epoxidized Natural Rubber Composite Containing A Li/Cr Co-Doped Nio-Based Filler, B Khumpaitool, S Utara, P Jantachum

Journal of Metals, Materials and Minerals

Li and Cr co-doped NiO-based (LCNO) filler was successfully synthesized by the sol-gel process using metal nitrate compounds as starting materials and citric acid as a crosslinking agent, followed calcination at a temperature of 1000˚C for 3 h. Composites of Li and Cr co-doped NiO/epoxidized natural rubbers with 25 mol% epoxidation (abbreviated as LCNO/ENR-25) were prepared by mixing using a two-roll mill. The ENR-25 was blended with 0.5, 1, 2 and 3 phr (parts per hundred of rubber) of LCNO and the specimens were shaped at 160˚C using compression molding. The LCNO/ENR-25 composites were characterized by thermogravimetric analysis (TGA), Fourier-transform …

Utilization Of Coal Fly Ash As A Raw Material For Refractory Production, R Sukkae, S Suebthawilkul, B Cherdhirunkorn

Journal of Metals, Materials and Minerals

In this research, fireclay bricks were produced using fire clay and coal fly ash as raw materials. Coal fly ash was added to the mixture from 10-50 wt%. The disk shape samples were sintered at the temperatures of 1,100-1,400°C. The mechanical property, thermal property, phase structure and microstructure of the fireclay bricks were studied. It was found that coal fly ash can be used in the fabrication of fireclay bricks. The lower linear shrinkage and lower thermal conductivity were obtained as the higher amount of coal fly ash was added. However, bulk density and strength were lower in the samples …

Intermodel Comparison Between Switch 2.0 And Ge Maps: Evaluating A New Tool For Integrated Modeling Of Electric Vehicles And High-Renewable Power Systems, Florida Solar Energy Center, Matthias Fripp

FSEC Energy Research Center®

This report presents an inter-model comparison between the Switch and GE Energy Consulting, (GE) Multi Area Production Simulation (MAPS) power system models. This work was conducted as part of the project on the "Effect of Electric Vehicles on Power System Expansion and Operation" under a sub award to the Hawaii Natural Energy Institute, University of Hawaii at Manoa (UH), from the Electric Vehicle Transportation Center (EVTC) at the Florida Solar Energy Center, University of Central Florida. The EVTC is a University Transportation Center funded by the Research and Innovative Technology Administration of the US Department of Transportation. The EVTC is …

Inference Framework For Model Update And Development, Xiao Lin

Theses and Dissertations

Computational models play an important role in scientific discovery and engineering design. However, developing computational models is challenging, since the process always follows a path contaminated with errors and uncertainties. The uncertainties and errors inherent in computational models are the result of many factors, including experimental uncertainties, model structure inadequacies, uncertainties in model parameters and initial conditions, as well as errors due to numerical discretizations. To realize the full potential in applications it is critical to systematically and economically reduce the uncertainties inherent in all computational models.

Effects Of Spinal Fusion For Idiopathic Scoliosis On Lower Body Kinematics During Gait, Karen M. Kruger, Christina R. Garman, Joseph J. Krzak, Adam Graf, Sahar Hassani, Sergey Tarima, Peter F. Sturm, Kim W. Hammerberg, Purnendu Gupta, Gerald F. Harris

Biomedical Engineering Faculty Research and Publications

Objectives

The purpose of this study was to compare gait among patients with scoliosis undergoing posterior spinal fusion and instrumentation (PSFI) to typically developing subjects and determine if the location of the lowest instrumented vertebra impacted results.

Summary of Background Data

PSFI is the standard of care for correcting spine deformities, allowing the preservation of body equilibrium while maintaining as many mobile spinal segments as possible. The effect of surgery on joint motion distal to the spine must also be considered. Very few studies have addressed the effect of PSFI on activities such as walking and even fewer address …

Will The Real Designer Please Stand Up? [Senior Design], Jay R. Goldberg

Biomedical Engineering Faculty Research and Publications

In the 1950s and 1960s, there was a popular television show called To Tell the Truth, on which three contestants claimed to be a person with an unusual occupation or distinction. Two of them were impostors, and the other was telling the truth. Four panelists asked the contestants questions to determine who was being truthful. After each panelist chose the contestant he or she thought was telling the truth, the host would ask "Will the real _____ please stand up?" To create drama, each contestant would rise at different times and then sit, leaving the contestant with the unusual occupation …

Evaluation And Design Improvement Of An Augmentative And Alternative Communication Tool For Children With Autism, Moez Lidinallah Fessi

Theses and Dissertations

Autism Spectrum Disorder treatment is a real challenge in our society. In an attempt to manage this, Augmentative and Alternative Communication devices became more and more prevalent in the form of software installed on portable devices such as tablets. These mobile applications help individuals with autism to enhance their communication capabilities. Some of the concerns pertaining to the success these systems are the efficacy and the capability, the ease of use, and the user engagement. The research described in this thesis focuses on the usability of a particular application named Livox. This usability evaluation consisted of a threefold approach: (1) …

Reconsidering The Foundations Of Thermodynamics From An Engineering Perspective, Terry Bristol

Mathematics and Statistics Faculty Publications and Presentations

Currently, there are two approaches to the foundations of thermodynamics. One, associated with the mechanistical Clausius-Boltzmann tradition, is favored by the physics community. The other, associated with the post-mechanical Carnot tradition, is favored by the engineering community. The bold hypothesis is that the conceptual foundation of engineering thermodynamics is the more comprehensive. Therefore, contrary to the dominant consensus, engineering thermodynamics (ET) represents the true foundation of thermodynamics. The foundational issue is crucial to a number of unresolved current and historical issues in thermodynamic theory and practice. ET formally explains the limited successes of the ‘rational mechanical’ approaches as idealizing special …

A Framework And Exploration Of A Cybersecurity Education Escape Room, Justin Charles Snyder

Theses and Dissertations

This thesis presents a review of educational-escape-room literature followed by a design-oriented framework (the Snyder Escape Room Framework or SERF) and demonstrates the potential efficacy of escape-rooms in cybersecurity education. Several authors have proposed frameworks and guidelines for game and educational design regarding escape rooms. This work coalesces some of those ideas into a more substantial and comprehensive framework (SERF) that designers can use when developing educational escape rooms. The Snyder Escape Room Framework provides heuristics for goals and objectives, players, activities, context, trajectory design, and evaluation. Additionally, this work describes and analyzes the novel prototyped BYU GCC escape room …

Control Laws For Autonomous Landing On Pitching Decks, Kendrick Buchala

Theses and Dissertations

This thesis addresses the problem of landing a quadcopter onto the pitching deck of a ship, as a partial simulation of a shipboard landing during high seas. The deck is modeled to pitch with a sinusoidal motion. While shipboard landing consists of many stages, only the final landing is simulated in this research. Other ship motions, such as roll and heave, are likewise not considered. The goal is to land the quadcopter in the center of the deck with minimal position and pitch error, where position error measures how far fore or aft of the center of the landing pad …

Dynamics Of Spacecraft Orbital Refueling, Casey Clark

Theses and Dissertations

A quantitative collation of relevant parameters for successfully completed experimental on-orbit fluid transfers and anticipated orbital refueling future missions is performed. The dynamics of connected satellites sustaining fuel transfer are derived by treating the connected spacecraft as a rigid body and including an internal mass flow rate. An orbital refueling results in a time-varying local center of mass related to the connected spacecraft. This is accounted for by incorporating a constant mass flow rate in the inertia tensor. Simulations of the equations of motion are performed using the values of the parameters of authentic missions in an endeavor to provide …

Human-Centered Design Of A 3d-Augmented Strategic Weather Management System For The Aviation Community, Sébastien Léonce Paul Boulnois

Theses and Dissertations

Convective weather is one of the main causes of accidents in the National Airspace System according to the Federal Aviation Administration. The purpose of this research, aligned with current NextGen research efforts, was to determine how weather information, presented in 2D and/or 3D, and associated with interaction features, could impact airline pilots’ weather-related situation awareness and decision-making capabilities. Human-Centered Design principles, along with Design Thinking, were used and led to the design of a 3D-Augmented Strategic Weather Management System aiming to satisfy this research question. The system is called “Onboard Weather Situation Awareness System” (OWSAS) in the scope of this …

Improving Stb Devices’ Parental Control, Mahmood Fawzi Alfathe

Theses and Dissertations

In this dissertation, an IPTV system was designed with new viewer parental control authentication method. People deal with traditional IPTV systems that use simple authentication numeric passcodes, and this topic did not receive the attention to overcome its security problems. In this dissertation two contributions were introduced, the first one is to design and implement an IPTV system that uses humans’ Biometrics authentication instead of numeric passwords; the second contribution was presented by integrating and testing the efficiency of the suggested solution as an authentication key against traditional numerical passcodes. Also, the characteristics of this new method were tested. In …

Optimizing Dynamic Range For Micro-Electro-Mechanical Resonators, Douglas John Schoeller

Theses and Dissertations

The performance of microelectromechanical systems (MEMS) is a topic that attracts attention from the scientific community due to their diverse applications. The use of MEMS has been applied to areas of medicine, timing, sensing, and microfluids to name a few. This work seeks to enhance the performance of a MEM resonator by optimizing its linear dynamic range (LDR) through the idea of combining the mixed nonlinear effects that stem from mechanical and electrostatic forces. The modeling procedure in this work incorporates the third-order Duffing model and includes an electrostatic effect that is expanded to the fifth order nonlinearity. When involving …

Dynamic Behavior Of Granular Earth Materials Subjected To Pressure-Shear Loading, Jeff Wilson Lajeunesse

Dissertations (1934 -)

The dynamic response of granular earth materials such as sand has been of interest for many years. Multiple previous works have explored the shock response of sand in various grain shapes, sizes, and moisture contents, but the response during rapid combined loading has been relatively unexplored. The current study contributes to that lack of data by performing pressure-shear experiments on Oklahoma #1 silica sand, with quasi-smooth grains of 63 - 120 micron diameter and 99.8 wt.% Si02 composition. In these experiments, an oblique flyer plate impacts an equally inclined target, imparting a longitudinal (pressure) and transverse (shear) wave into a …

An Empirical Path Loss Model For Wireless Sensor Network Deployment In A Library Environment, Thomas John Misilo

Theses and Dissertations

Wireless networks are becoming more commonplace which has necessitated the know-how to optimally place the devices. There have been studies using wireless sensor networks inside of libraries and museums. However, extensive research has not been completed on propagation modeling for use in the library environment. The main aim of this research is to provide a propagation path loss model for a typical library environment, while comparing two types of antennas (wire and small dipole antenna). This research develops path loss models for a peer-to-peer 2.4 GHz system, where both the transmitter and the receiver are located at the same elevated …

Design And Simulation Of An Intelligent Self-Adaptive System For A Smart Home, Basman M. Hasan Alhafidh

Theses and Dissertations

Home automation and control systems as basic elements of smart cities have played a key role in the development of our homes environments . They have a wide range of applications in many fields at home such as security and monitoring, healthcare, energy, and entertainment applications. The improvement of humans’ living standards make people keep trying to delegate many of their needs to a home automation system. Such a system has been built with capabilities of predicting what the user intends to do in smart home environment. However, there are many issues that need more investigation and solutions, such as: …

Robust Assignment Of Customer Orders With Uncertain Configurations In A Production Network For Aircraft Manufacturing, Jens Buergin, Philippe Blaettchen, Juri Kronenbitter, Katharina Molzahn, Yannick Schweizer, Caroline Strunz, Manuel Almagro, Frank Bitte, Stephan Ruehr, Marcello Urgo, Gisela Lanza

Research Collection Lee Kong Chian School Of Business

Production of multi-variant products in a network requires the assignment of customer orders to locations and periods. This is a highly complex planning task, as requirements of procurement, production, distribution, and sales have to be considered. Providing customers with the flexibility of configuring their ordered products after order assignment further increases the complexity of the planning task by taking uncertainty into account. Therefore, a robust optimisation model, using scenarios representing potential customer-specific order configurations, is introduced. By providing enough flexibility to handle maximum work overload caused by the potential order configurations at locations, a robust assignment of orders can be …

Improvements For Vision-Based Navigation Of Small, Fixed-Wing Unmanned Aerial Vehicles, Robert C. Leishman, Jeremy Gray, John F. Raquet, Adam Rutkowski

Faculty Publications

Investigating alternative navigation approaches for use when GPS signals are unavailable is an active area of research across the globe. In this paper we focus on the navigation of small, fixed-wing unmanned aerial vehicles (UAVs) that employ vision-based approaches combined with other measurements as a replacement for GPS. We demonstrate with flight test data that vehicle attitude information, derived from cheap, MEMS-based IMUs is sufficient to improve two different types of vision processing algorithms. Secondly, we show analytically and with flight test data that range measurements to one other vehicle with global pose is sufficient to constrain the global drift …

Gekko Optimization Suite, Logan Beal, Daniel Hill, Ronald Abraham Martin, John Hedengren

Faculty Publications

This paper introduces GEKKO as an optimization suite for Python. GEKKO specializes in dynamic optimization problems for mixed-integer, nonlinear, and differential algebraic equations (DAE) problems. By blending the approaches of typical algebraic modeling languages (AML) and optimal control packages, GEKKO greatly facilitates the development and application of tools such as nonlinear model predicative control (NMPC), real-time optimization (RTO), moving horizon estimation (MHE), and dynamic simulation. GEKKO is an object-oriented Python library that offers model construction, analysis tools, and visualization of simulation and optimization. In a single package, GEKKO provides model reduction, an object-oriented library for data reconciliation/model predictive control, and …

Sponsored Libre Research Agreements To Create Free And Open Source Software And Hardware, Joshua M. Pearce

Michigan Tech Publications, Part 1

As a growing number of companies reject intellectual property (IP) monopoly-based business models to embrace libre product development of free and open source hardware and software, there is an urgent need to refurbish the instruments of university-corporate research partnerships. These partnerships generally use a proprietary standard research agreement (PSRA), which for historical reasons contains significant IP monopoly language and restrictions for both the company and the university. Such standard research agreements thus create an artificial barrier to innovation as both companies using a libre model and universities they wish to collaborate with must invest significantly to restructure the contracts. To …

Developmental Steps For A Functional Three-Dimensional Cell Culture System For The Study Of Asymmetrical Division Of Neural Stem Cells, Martina Zamponi

Biomedical Engineering Theses & Dissertations

Stem cells are a cell type present during and following development, which possess self- renewal properties, as well as the ability to differentiate into specific cells. Asymmetrical division is the cellular process that allows stem cells to produce one differentiated and one un-differentiated daughter cell during the same mitotic event. Insights in the molecular mechanisms of such process are minimal, due to the absence of effective methods for its targeted study. Currently, traditional methods of investigation include monolayer cell culture and animal models. The first poses structural limitations to the accurate representation of human tissue and cell structures, while animal …

Development Of A Small Diameter Rapid Pressuremeter Test For Unbound Pavement Layer Evaluations, Thaddeus Joseph Misilo Iii

Theses and Dissertations

Six inch and 12 inch long small diameter pressuremeter (SDPMT) probes were developed and tested extensively to determine in situ stress-strain properties of unbound pavement layers. They were deployed in the same hole as the one made during nuclear density testing. The stress strain response of conventional or incremental and continuous or rapid strain controlled tests in unbound pavement layers were evaluated at four sites in Brevard County, Florida. One test site was A-1-b base material, one was A-3 subgrade and two were compacted A-3 fill of subgrade quality. The SDPMT results were compared with nuclear density dry and wet …

A Robot Fdm Platform For Multi-Plane And 3d Lattice Structure Printing, Ismayuzri Bin Ishak

Theses and Dissertations

Additive manufacturing is a process to fabricate three-dimensional (3D) objects usually by joining a material layer by layer. The layer by layer joining process simplifies the fabrication method by slicing the 3D object into stacks of 2D contours. The layers are combined in a single build direction to form the 3D object. The purpose of this research is generate new knowledge in additive manufacturing process by integrate a six degree of freedom robot arm platform with a fused deposition modeling system entitled MotoMaker for additive manufacturing applications. The development of a higher degree of freedom additive manufacturing platform allows for …

Direct Numerical Simulations Of Incompressible Flow Through Porous Packs Over A Wide Range Of Reynolds Numbers, Antoine Michael Diego Jost

Theses and Dissertations

Direct numerical simulations of incompressible flow through periodic square/rectangular (two-dimensional; 2-D) and cubic (three-dimensional; 3-D) arrays of particles and periodic random packs of polydisperse spheres over a wide range of Reynolds numbers and at various porosities are performed. The unsteady Navier- Stokes equations are solved with either a 3-D parallel finite-difference (FD) inhouse research code on a collocated Cartesian grid and with an immersed boundary method (IBM) to treat the internal boundaries, or with the finite-volume (FV) solver OpenFOAM R⃝ on an unstructured grid and with an explicit treatment of the boundaries. The FD explicit solver is used for 2-D …

An Analysis Of The Relationship Between Orthopedic Drill Bit And Screw Diameter On Drilling Energy And Axial Load Pullout Strength, Scott J. J. Baskerville

Theses and Dissertations

The number of orthopedic procedures performed per year in the United States is expected to grow to 6.6 million by 2020 (1). Most of these surgeries involve some degree of bone drilling and screw fixation, putting many patients at risk of the adverse effects of the heat-induced osteonecrosis which can limit the holding strength of bone screws and the efficacy of the screw-dependent fixtures. Excessive heat-induced osteonecrosis can occur when surgeons prolong the drilling procedure to avoid drill plunge, which can cause damage to soft neurovascular tissues local to the drilling site (2). The SMARTdrill system used in this study …

Isru Thermal-Driven Processes On Interplanetary Surfaces And Characteristics On Production Of Commodities, Jesus A. Dominguez

Theses and Dissertations

Extraterrestrial In-Situ Resource Utilization (ISRU) is a primary area of interest to enable successful exploration, mining, and human settling in space missions. Native extraterrestrial conditions, such as vacuum conditions and low gravity are challenging as their effects on workable-scale ISRU operations are basically unknown. This dissertation research work studied three thermal-driven properties on JSC-lA lunar regolith simulant at pilot-plant-­scale under vacuum (a native ambient condition on the moon and asteroids): (1) gasification and decomposition of regolith's components that have the potential of generating gaseous oxygen, metals, and alloys without the necessity of terrestrial precursors, (2) vacuum void formation during the …

Adaptive Spaceship Cockpit Architecture, Ondřej Doule

Theses and Dissertations

This research project is focused on a system design theory and practice of the most complex environment that a human-system architect can ever encounter. It is the environment of the spaceship cockpit or cabin that is affected by forces of propulsion and gravity accelerations and freefall while the direction and magnitude of gravity change during the flight. Furthermore, the hyperbaric, restrictive environment of Intra Vehicular Activity spacesuit adds another layer of complexity. In off-nominal or emergency situations, these environmental effects combine, which results in specific human-system interaction requirements. Considering human-system integration requirements on safety, comfort and efficiency of communication between …

Tornado And Hurricane Hazards: Reconnaissance, Structural Analysis And Vulnerability Modeling, Fernando Simon Plaz

Theses and Dissertations

This thesis is composed of three main projects which are directly linked to wind engineering. Hazards such as tornadoes and hurricanes are natural disasters which causes human and economic losses. First, the study consists on a forensic analysis made to a Tornado that hit Funing and Sheyang counties, in the Jiangsu Province of China. 21 villages, mostly rural, experienced important damages to different type of structures. The work will describe field observations and structural analyses made to communication towers. Preliminary estimates of wind speeds will be given based on the observations and the analysis as well as recommendations to reduce …

Investigation Of The Skin Effect In Alternating Currents, Matthew Liang

The International Student Science Fair 2018

My research is on the investigation of the skin effect in alternating currents. The skin effect is when an alternating current tends to flow on the surface of the conductor, such that the current density is highest near the surface, and decreases with greater depths in the conductor. This is due to the alternating current inducing changing magnetic fields, which in turn induces currents that oppose the original flow of current, resisting the current flowing through the centre the most. This reduces the effective cross-sectional area of the conductor and increases the resistance, causing increased power losses. This effect becomes …