Engineering Commons^™

Mechanical Engineering News, Georgia Southern University

Mechanical Engineering: News & Publications (2013-2023)

• Students Participate in Study Abroad in Germany

Metal Reactivity In Laboratory Burned Wood From A Watershed Affected By Wildfires, Asifur Rahman

Civil Engineering ETDs

Massive amounts of wood ash are deposited into nearby streams as a result of runoff from storm events after increasing frequency of wildfire events that negatively affect water quality. Ash and debris from burned vegetation can alter the pH, turbidity and dissolved oxygen (DO) in water and can release heavy metals, organic matter, and nutrients. We investigated interfacial processes affecting metal mobility in wood ash burned under laboratory-controlled conditions using aqueous chemistry, microscopy and spectroscopy analyses. Wood was collected from the Valles Caldera National Preserve in New Mexico which has experienced two wildfires since 2011 that have caused devastating effects. …

Data-Driven Uncertainty Quantification Interpretation With High Density Regions, Matthew Gregor Peterson

Computer Science ETDs

In a time when data is being constantly generated by phones, vehicles, sensor net- works, social media, etc. detecting anomalies with in the data can be very crucial. In cases where we know little prior knowledge about the data, it becomes difficult to extract uncertainty about our results. In this thesis, we will propose a framework in which we can extract uncertainty distributions from data-driven modeling prob- lems. We will show some concrete examples of how to apply framework and provide some insight into what the uncertainty distributions are telling us using High Density Regions (HDRs).

Me2b

SIGNED: The Magazine of The Hong Kong Design Institute

Fixing the internet's biggest flaw

Seismic Performance And Retrofit Evaluation Of Hollow-Core Composite Bridge Columns, Mohanad M. Abdulazeez, Ahmed Gheni, Nicholas Colbert, Mohamed Elgawady

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This paper presents the seismic behavior of large-scale hollow-core fiber-reinforced polymerconcrete-steel (HC-FCS) bridge column. The HC-FCS column consists of a concrete wall sandwiched between an outer fiber-reinforced polymer (FRP) tube and an inner thin-walled steel tube. The width-to-diameter ratio for the steel tube was 147. The column had an outer diameter of 24 inches and a height-to-diameter ratio of 4.0. The steel tube was embedded into reinforced concrete footing with an embedded length of 1.25 times the steel tube diameter, while the FRP tube only confined the concrete wall thickness and curtail at the top of the footing level. The …

Intelligent Computational Transportation, Yuming Zhang

Electrical and Computer Engineering ETDs

Transportation is commonplace around our world. Numerous researchers dedicate great efforts to vast transportation research topics. The purpose of this dissertation is to investigate and address a couple of transportation problems with respect to geographic discretization, pavement surface automatic examination, and traffic ow simulation, using advanced computational technologies. Many applications require a discretized 2D geographic map such that local information can be accessed efficiently. For example, map matching, which aligns a sequence of observed positions to a real-world road network, needs to find all the nearby road segments to the individual positions. To this end, the map is discretized by …

Properties Of Torrefied U.S. Waste Blends, Zhou Xu, Stas Zinchik, Shreyas Kolapkar, Ezra Bar Ziv, Ted Hansen, Dennis Conn, Armando G. Mcdonald

Michigan Tech Publications, Part 1

Power generation facilities in the U.S. are looking for a potential renewable fuel that is sustainable, low-cost, complies with environmental regulation standards and is a drop-in fuel in the existing infrastructure. Although torrefied woody biomass, meets most of these requirements, its high cost, due to the use of woody biomass, prevented its commercialization. Industrial waste blends, which are also mostly renewable, are suitable feedstock for torrefaction, and can be an economically viable solution, thus may prolong the life of some of the existing coal power plants in the U.S. This paper focuses on the torrefaction dynamics of paper fiber-plastic waste …

Selected Applications Of Silicon Nanopillar Arrays., Behnam Kheyraddini Mousavi

Electrical and Computer Engineering ETDs

Interaction of optical waves with nanostructures made of various material systems has been the subject of intensive research for many years. These researches have been mainly driven by the need to make smaller optical devices and exploiting the functionalities offered by light-matter interaction in nanoscale. Majority of the nanostructures are fabricated using electron beam (e-beam) lithography that is slow and expensive. As such alternative methods have been developed to enable nanoscale fabrication faster and less expensive. Among these interferometric lithography (IL) is a relatively simple method for quick fabrication of nanostructures. As IL method generates periodic patterns, exploring the potential …

Huron-To-Erie Water Quality Data Platform, Lanyu Xu, Carol J. Miller, James Olson, Michael Beaulac

Civil and Environmental Engineering Faculty Research Publications

To address the challenges of environmental degradation, creation of a sustainable urban environment, and increased public engagement and awareness, a mass-oriented, user-friendly and cloud-based data platform has been developed and deployed to provide integrative water quality data in one of the most critical urban corridors of the Laurentian Great Lakes system. In this paper, we describe the data platform developed for the watershed and connecting channels between Lake Huron and Lake Erie, including the St. Clair River, Lake St. Chair, and the Detroit River. This data platform greatly facilitates the access of data across data providers and agencies. Several example …

Coreless And Conventional Axial Flux Permanent Magnet Motors For Solar Cars, Narges Taran, Vandana Rallabandi, Greg Heins, Dan M. Ionel

Power and Energy Institute of Kentucky Faculty Publications

Axial flux permanent magnet (AFPM) motors are suitable options for solar-powered vehicles due to their compact structure and high torque density. Furthermore, certain types of AFPM machines may be configured without stator cores, which eliminates associated losses and cogging torque and simplifies the manufacturing and assembly. This paper examines two machine designs for use in the solar-powered vehicle of the challenger class-a single rotor, single stator conventional AFPM machine, and a coreless AFPM machine with multiple stator and rotor disks. The response surface methodology (RSM) is utilized for the systematic comparison of the conventional and coreless topologies and to select …

High-Performance Testbed For Vision-Aided Autonomous Navigation For Quadrotor Uavs In Cluttered Environments, Shakeeb Ahmad

Electrical and Computer Engineering ETDs

This thesis presents the development of an aerial robotic testbed based on Robot Operating System (ROS). The purpose of this high-performance testbed is to develop a system capable of performing robust navigation tasks using vision tools such as a stereo camera. While ensuring the computation of robot odometery, the system is also capable of sensing the environment using the same stereo camera. Hence, all the navigation tasks are performed using a stereo camera and an inertial measurement unit (IMU) as the main sensor suite. ROS is used as a framework for software integration due to its capabilities to provide efficient …

Microwave Characterization Of Printable Dielectric Inks Using Additive Manufacturing Methods, Seth York

USF Tampa Graduate Theses and Dissertations

Two methods of dielectric characterization are presented that offer quick and cost-effective solutions for screening complex dielectric material properties. Through Direct-Print Additive Manufacturing (DPAM) methods, a dielectric material of choice is dispensed into a capacitor structure and characterized through 1-port s-parameter measurements. The presented methods use fixtures that are modeled and validated through simulation then implemented in practice. Advanced simulations are performed to gain insights which are used to optimize the dielectric characterization performance of the fixtures. Additional investigations are performed which investigate the durability of the fixture and material within by exposing the combination to rough environmental conditions for …

Compact Hardware Implementation Of A Sha-3 Core For Wireless Body Sensor Networks, Yi Yang, Debiao He, Neeraj Kumar, Sherali Zeadally

Information Science Faculty Publications

One of the most important Internet of Things applications is the wireless body sensor network (WBSN), which can provide universal health care, disease prevention, and control. Due to large deployments of small scale smart sensors in WBSNs, security, and privacy guarantees (e.g., security and safety-critical data, sensitive private information) are becoming a challenging issue because these sensor nodes communicate using an open channel, i.e., Internet. We implement data integrity (to resist against malicious tampering) using the secure hash algorithm 3 (SHA-3) when smart sensors in WBSNs communicate with each other using the Internet. Due to the limited resources (i.e., storage, …

Bioengineering Of An In Vitro Microphysiological Human Alveolar Model, Ayesha Arefin

Nanoscience and Microsystems ETDs

Drugs tested on animal models do not always produce the same results in humans; a reliable in vitro lung model can bridge the divide between the two. Because the alveolus is a target for several drugs, an alveolar model can be a platform for both designing drugs and studying lung diseases. A model should allow for gas exchange, growth of primary alveolar epithelial cells, extracellular matrix production, and have similar mechanical properties to alveoli, creating an environment conducive to normal metabolic activity and cellular responses. Existing artificial alveolar models that use polymeric membranes to sustain lung cells are limited by …

Catalysts For Nitrogen Reduction To Ammonia, Royce D. Duda, Julie N. Renner

Faculty Scholarship

The production of synthetic ammonia remains dependent on the energy- and capital-intensive Haber-Bosch process. Extensive research in molecular catalysis has demonstrated ammonia production from dinitrogen, albeit at low production rates. Mechanistic understanding of dinitrogen reduction to ammonia continues to be delineated through study of molecular catalyst structure, as well as through understanding the naturally occurring nitrogenase enzyme. The transition to Haber-Bosch alternatives through robust, heterogeneous catalyst surfaces remains an unsolved research challenge. Catalysts for electrochemical reduction of dinitrogen to ammonia are a specific focus of research, due to the potential to compete with the Haber-Bosch process and reduce associated carbon …

Cross Photoreaction Of Glyoxylic And Pyruvic Acids In Model Aqueous Aerosol, Sha-Sha Xia, Alexis J. Eugene, Marcelo I. Guzman

Chemistry Faculty Publications

Aerosols of variable composition, size, and shape are associated with public health concerns as well as with light-particle interactions that play a role in the energy balance of the atmosphere. Photochemical reactions of 2-oxocarboxylic acids in the aqueous phase are now known to contribute to the total secondary organic aerosol (SOA) budget. This work explores the cross reaction of glyoxylic acid (GA) and pyruvic acid (PA) in water, the two most abundant 2-oxocarboxylic acids in the atmosphere, under solar irradiation and dark thermal aging steps. During irradiation, PA and GA are excited and initiate proton-coupled electron transfer or hydrogen abstraction …

Portable Electronic Devices On The Flight Deck, Irena Wentzel, John E. Deaton

International Journal of Aviation, Aeronautics, and Aerospace

The emergence of portable electronic devices (PEDs) has provided people with most anything at the touch of a button but has caused many safety-related distractions at the same time. A somewhat addictive reliance on PEDs, mostly smart phones, seems to exist even during times that would prohibit their use. Operation of PEDs during these times has led to some fatal accidents in all areas of transportation. The urgency of this safety issue now means the National Transportation Safety Board (NTSB) studies what role a PED may have played in every new accident investigation. Examining the use of PEDs on the …

Synchronization In An Externally Driven Mechanical Oscillators Experiment, Sumit Chhabria

Electrical and Computer Engineering ETDs

Our experimental system studies the effects of externally controlled oscillation on directly and indirectly driven system of metronomes. This is analogous to many practical systems such as pacemaker effect on heart cells, the external light effect on the suprachiasmatic nucleus in the brain. Here the pacemaker can be compared to an external driving force to the system where the heart cells are our oscillating system. Also, in the suprachiasmatic nucleus cell system, the external input is external light which synchronizes the cell. We explore the synchronization of directly and indirectly driven metronomes due to externally provided forcing.

We designed an …

Correction: Orbital Angular Momentum Generation And Detection By Geometric-Phase Based Metasurfaces [Appl. Sci., 8, (2018), (362)] Doi:10.3390/App8030362, Menglin L.N. Chen, Li (Lijun) Jun Jiang, Wei E.I. Sha

Electrical and Computer Engineering Faculty Research & Creative Works

We, the authors, wish to make the following corrections to our paper [1]. We found that the literature we listed on page 2 has a mistake: "Afterwards, many other devices for OAM generation have been proposed, such as the cylindrical lens in 1993 [30], spiral phase plates (SPPs) in 1994 [31], q plates in 2006 [32]." We would like to give credit to the first phase rotor filter [2] and remove the year for the designs. Thus, the statement would be changed to: "In 1992, a phase rotor filter was devised to introduce the azimuthal phase term [30]. Afterwards, many …

Modification And Assessment Of A Residential Summer Program For High School Women, Aimee Cloutier, Guo Zheng Yew, Siddhartha Gupta, Kalpani Dissanayake, Paula Monaco, Susan Mengel, Audra Morse

Journal of Pre-College Engineering Education Research (J-PEER)

The importance of reducing the gender gap in engineering programs by recruiting and retaining female students is well recognized. Although women hold roughly half of all jobs in the United States, only 24% of STEM jobs are occupied by women. The problem is even more pronounced for engineering, where women held about 12% of jobs as of 2013 (Corbett & Hill, 2015). Consequently, interactive, hands-on outreach programs are a common tool used by universities to encourage interest in engineering from K–12 students. Engineering—Get Into Real Learning (E-GIRL) is a week-long, residential summer program offered by Texas Tech University for female …

16-09 Transportation Mobility Among Low-Income, Transportation Disadvantaged Older Adults Living In A Low Density Urban Environment Using Innovative Data Collection Methods, Noelle Fields, Courtney Cronley, Stephen Mattingly, David Levine, Vivian J. Miller, Erin R. Murphy, Marcus Crawford, Lubia Gwak, Saeed Reza Ramezanpour Nargesi, Ziaur Rahman, Meenakshi Balasubramanian

Transportation Research Center Reports

This study investigates the transportation disadvantage that low-income, older adults face on an individual basis. To accomplish this, research team members custom designed an innovative “travel diary” app, MyAmble, which tracks planned, completed, failed/uncompleted trips, and unserved trips in its Trip Planner module. In addition to the typical transportation planning data (e.g. origin, destination, mode), MyAmble collects data related to the completed or failed/uncompleted trip’s impact on the participant’s mood and quality of life. MyAmble utilizes 3 additional modules (Challenge Logger, Travel Buddy, and Travel History) to collect qualitative data related to the role that transportation plays in the participant’s …

A Study Of Comparing Cad/Cam Simulated Machining Time With Practical Cnc Machining Time And The Influence Of The Parameter Setting In Cnc, Jinming Wan

Morehead State Theses and Dissertations

A thesis presented to the faculty of the College of Business and Technology at Morehead State University in partial fulfillment of the requirements for the degree of Master of Science by Jinming Wan on July 11, 2018.

Usu Civil Engineering Student Wins Prestigious National Scholarship | College Of Engineering, Usu College Of Engineering

College of Engineering News

A senior in USU’s Civil and Environmental Engineering department is one of 18 people nationwide to receive a major scholarship from the American Society of Civil Engineers, known as ASCE.

The Investigation Of Silica Removal In Reverse Osmosis Concentrate By Changing Design Parameters, John M. Stomp Iv

Civil Engineering ETDs

Silica at high concentrations can precipitate and polymerize, forming scales on heat exchangers, boilers and turbines in industrial equipment, and on the feed side of the semi-permeable membranes in Reverse Osmosis (RO). Silica scale can cause decreased efficiency, increased treatment costs and, in some cases, irreversible damage. The removal of silica scale is challenging because it requires the handling of dangerous and hazardous chemicals. Therefore, much research has gone into the removal of soluble silica. The purpose of this research was to compare the overall effectiveness of silica removal in RO concentrate water with freshly precipitated Mg(OH)₂ and Fe(OH) …

The Performance Of Syngas-Fueled Sofcs Predicted By A Reduced Order Model (Rom): Temperature And Fuel Composition Effects, Xinfang Jin, Anthony Ku, Atul Verma, Brandon Ohara, Kevin Huang, Surinder Singh

Faculty Publications

An electrochemical reduced order model (ROM) has been developed in this study to simulate the performance of syngas-fueled anode-supported SOFCs with coupled bulk chemical reactions and multi-species gas diffusion in the electrodes. Experimental V-I curves with syngas fuel were used to validate the model to ensure its high fidelity. The model was used to investigate the effects of fuel composition and temperature on the electrochemical performance of the cell, chemical reaction rate and concentration distributions of gaseous species across the anode. The results show that H₂ electro-oxidation dominates the overall cell performance, and that CO contributes to the performance …

Short-Term Tracking Of Orientation With Inertial Sensors, Golriz Sedaghat

Dissertations and Theses

In the past several years, IMU's have been widely used to measure the orientation of a moving body over a continuous period of time. Although, inertial navigation is a common approach for estimating the orientation, it greatly suffers from the accumulation of error in the orientation estimation. Most of the current common practices apply zero velocity update as a calibration method to address this problem and improve the estimation accuracy. However, this approach requires the sensors to be stationary frequently.

This thesis introduces a novel method of calibration for estimating the elevation and bank angles of the orientation over a …

Optimal Multidimensional Droop Control For Wind Resources In Dc Microgrids, Kaitlyn J. Bunker, Wayne Weaver

Michigan Tech Publications, Part 1

The inclusion of electricity generation from wind in microgrids presents an important opportunity in modern electric power systems. Various control strategies can be pursued for wind resources connected in microgrids, and droop control is a promising option since communication between microgrid components is not required. Traditional droop control does have the drawback of not allowing much or all of the available wind power to be utilized in the microgrid. This paper presents a novel droop control strategy, modifying the traditional approach and building an optimal droop surface at a higher dimension. A method for determining the optimal droop control surface …

Validating The Accuracy Of Neatwork, A Rural Gravity Fed Water Distribution System Design Program, Using Field Data In The Comarca Ngöbe-Bugle, Panama, Maria Briones

USF Tampa Graduate Theses and Dissertations

Despite the sustainable development goals to increase access to improved water there are still 884 million people in the world without access to an improved water source (WHO, 2017). One method to improve access to water in rural, mountainous areas, is through construction of gravity fed water distribution systems. These systems should be designed based upon fundamental principles of hydraulics. One method of doing so in a time efficient manner with minimal engineering knowledge is to utilize a downloadable computer program such as Neatwork, which aids in design of rural, gravity fed water distribution systems and has been used by …

Novel Compact Narrow-Linewidth Mid-Infrared Lasers For Sensing Applications, Behsan Behzadi

Optical Science and Engineering ETDs

The mid-infrared (2-14 μm) spectral region contains the strong absorption lines of many important molecular species, which make this region crucial for several well-know applications such as spectroscopy, chemical and biochemical sensing, security, and industrial monitoring. To fully exploit this region through absorption spectroscopic techniques, compact and low-cost narrow-linewidth (NLW) mid-infrared (MIR) laser sources are of primary importance.

This thesis is focused on three novel compact NLW MIR lasers: demonstration and characterization of a new glass-based spherical microlaser, investigation of the performance of a novel fiber laser, and the design of a monolithic laser on a silicon chip. Starting with …

Survey Results On Adults And Cybersecurity Education, Frank Breitinger, Joseph Ricci, Ibrahim Baggili

Electrical & Computer Engineering and Computer Science Faculty Publications

Cyberattacks and identity theft are common problems nowadays where researchers often say that humans are the weakest link in the security chain. Therefore, this survey focused on analyzing the interest for adults for ‘cyber threat education seminars’, e.g., how to project themselves and their loved ones. Specifically, we asked questions to understand a possible audience, willingness for paying / time commitment, or fields of interest as well as background and previous training experience. The survey was conducted in late 2016 and taken by 233 participants. The results show that many are worried about cyber threats and about their children exploring …