Engineering Commons^™

2018 Fall Engr333 Poster, Alexander Cooper, Katie Diekema, Grace Fasipe, Daniella Sugijanto, Alec Dejonge, Timothy Dykhuis, Breanna Kooiman, Samuel Olson, Brennan Boice, Tyler Gustman, Daniel Norton, Christopher Vanwhye, Robert Capozzoli, Jared Minderhoud, Clark Richeson, Nathan Schuyten, 2018 Fall Engr333 Section A

ENGR 333

• $158k initial investment in Geothermal systems for various Calvin-owned residential buildings
• $3.34M initial investment in solar panels for Calvin’s rooftops
• The overall savings would be $233,850 per year
• Emissions would be reduced by 864 tons of CO2 emissions per year
• The recommended investment would be fully paid back in 11-15 years

Analysis And Simulation Of Convolution Reverb Using City Tech’S New Auditorium, Tian Leng

Publications and Research

In digital signal processing, convolution reverb can simulate the reverberation of a real acoustic space. The acoustics of different seating areas in an auditorium can vary from each other. To determine the reverberant characteristics of City Tech new building’s auditorium, impulse response (IR) signals are recorded in five key locations of the auditorium.

Directly recorded balloon burst is chosen as the source of impulse source. An omnidirectional and a cardioid microphone with flat frequency response curves are used to record IR signals to 24-bit monophonic wav files. Each IR signal, along with a vocal, is convoluted in MATLAB through both …

College Of Engineering Senior Design Competition Fall 2018, University Of Nevada, Las Vegas

Fred and Harriet Cox Senior Design Competition Projects

Part of every UNLV engineering student’s academic experience, the senior design project stimulates engineering innovation and entrepreneurship. Each student in their senior year chooses, plans, designs, and prototypes a product in this required element of the curriculum. A capstone to the student’s educational career, the senior design project encourages the student to use everything learned in the engineering program to create a practical, real world solution to an engineering challenge. The senior design competition helps focus the senior students in increasing the quality and potential for commercial application for their design projects. Judges from local industry evaluate the projects on …

Concentric Contra-Rotating Dual Shaft Vertical Axis Wind Turbine, Emily Walz, Marcellin Zahui, Andrew Shires, Carl Gilkeson

Essential Studies UNDergraduate Showcase

A typical vertical axis wind turbine (VAWT) consists of two or more airfoils all attached to a single central axis. The wind turbine style most commonly found in renewable energy is the horizontal axis wind turbine (HAWT) that have a high energy production efficiency in exchange for requiring large amounts of land and air space. Alternatively, a VAWT can function in low speeds and in smaller less typical locations. As a result, novel VAWT designs are researched to improve their energy efficiency. An example of a novel VAWT is the concentric counter-rotating VAWT investigated theoretically using the 2D computational fluid …

Transition Pathways To Sustainable Agricultural Water Management: A Review Of Integrated Modeling Approaches, Erin M.K. Haacker, Vaishali Sharda, Amanda M. Cano, R. Aaron Hrozencik, Agustin Nunez, Zachary Zambreski, Soheil Nozari, Garvey Engulu B, Smith, Lacey Moore, Sumit Sharma, Prasanna Gowda, Chittaranjan Ray, Meagan Schipanski, Reagan Waskom

Nebraska Water Center: Faculty Publications

Agricultural water management (AWM) is an interdisciplinary concern, cutting across traditional domains such as agronomy, climatology, geology, economics, and sociology. Each of these disciplines has developed numerous process-based and empirical models for AWM. However, models that simulate all major hydrologic, water quality, and crop growth processes in agricultural systems are still lacking. As computers become more powerful, more researchers are choosing to integrate existing models to account for these major processes rather than building new cross-disciplinary models. Model integration carries the hope that, as in a real system, the sum of the model will be greater than the parts. However, …

Bandy, Richard Lewis (Sc 3305), Manuscripts & Folklife Archives

Manuscript Collection Finding Aids

Finding aid only for Manuscripts Small Collection 3305. Letter, 9 November 2018, of Richard L. Bandy, Bowling Green, Kentucky, to Mary Alice Oliver, in response to her article in a local magazine about Massey’s Mill in Warren County, Kentucky. Bandy provides recollections of a water-powered mill located on property owned by his family on Middle Fork Creek at Drake, Kentucky. Includes two photographs of the mill, a map showing its location, and Oliver’s reply to the letter.

2018 Fall Engr333 Seminar Presentation, Rachel Evans, Alex Gross, Daniella Sugijanto, Jake Shaarda

ENGR 333

File for student presentation, given by students in the Fall 2018 class of ENGR333.

Solar & Rain Catching Canopy "Urban Oasis 2", Afolabi Ibitoye, Cheriyah Wilmot, Alexander Aptekar, Grzegorz Kosieradzki, Kaiyrgul Sultanova, Jude Vallon

Publications and Research

The accumulation of water runoff during rain storms is a major problem in New York City’s combination water systems, forcing water treatment plants to release untreated excess water. To avoid overfilling of the sewer system by this grey water, pocket parks and gardens will be used to absorb the excess rainfall. We will be harnessing nature’s resources with current technologies such as: solar panels combined with rain catching canopies, to beautify the environment, educate the public about sustainability, stimulate growth to local businesses through increased foot traffic and bringing social awareness on environmental issues.

The canopies are designed to collect …

Simulating The Impacts Of Irrigation Levels On Soybean Production In Texas High Plains To Manage Diminishing Groundwater Levels, Vaishali Sharda, Prasanna H. Gowda, Gary Marek, Isaya Kisekka, Chittaranjan Ray, Pradip Adhikari

Nebraska Water Center: Faculty Publications

There is an increasing need to strategize and plan irrigation systems under varied climatic conditions to support efficient irrigation practices while maintaining and improving the sustainability of groundwater systems. This study was undertaken to simulate the growth and production of soybean [Glycine max (L.)] under different irrigation scenarios. The objectives of this study were to calibrate and validate the CROPGRO-Soybean model under Texas High Plains’ (THP) climatic conditions and to apply the calibrated model to simulate the impacts of different irrigation levels and triggers on soybean production. The methodology involved combining short-term experimental data with long-term historical weather data (1951–2012), …

Quenchant Cooling Curves, Rewetting, And Surface Heat Flux Properties Of Vegetable Oils, Rosa L. Simencio Otero, Jônatas M. Viscaino, Jun Xu, Jianfeng Wu, George Totten, Lauralice C.F. Canale

Mechanical and Materials Engineering Faculty Publications and Presentations

Vegetable oils are currently used for biodegradable and renewable base stocks for quenchant formulation. However, there are relatively few references relating to their true equivalency, or lack thereof, comparative to the quenching performance of petroleum oil-based quenchant formulations. To obtain an overview of the variability vegetable oil quenching performance, the cooling curves and rewetting properties were determined, and the surface heat flux properties were calculated. The vegetable oils that were studied included canola, coconut, corn, cottonseed, palm, peanut, soybean, and sunflower oils. Cooling curves were obtained using the Tensi multiple-surface thermocouple 15 mm diameter by 45 mm cylindrical Inconel 600 …

Gmaim: An Analytical Pipeline For Microrna Splicing Profiling Using Generative Model, Kan Liu

School of Computing: Dissertations, Theses, and Student Research

MicroRNAs (miRNAs) are a class of short (~22 nt) single strand RNA molecules predominantly found in eukaryotes. Being involved in many major biological processes, miRNAs can regulate gene expression by targeting mRNAs to facilitate their degradation or translational inhibition. The imprecise splicing of miRNA splicing which introduces severe variability in terms of sequences of miRNA products and their corresponding downstream gene expression regulation. For example, to study biogenesis of miRNAs, usually, biologists can deplete a gene in the miRNA biogenesis pathway and study the change of miRNA sequences, which can cause impression of miRNAs. Although high-throughput sequencing technologies such as …

Evaluation Of Moisture Susceptibility Of Asphalt Binders Using Atomic Force Microscopy (Afm), Sumon Roy

Student Theses and Dissertations

Stripping related moisture damage in asphalt pavement has been recognized as a serious concern to the state Departments of Transportations (DOTs). The current moisture sensitivity tests methods are mostly conducted at micro and macro levels and focused on qualitative measurements. In this study, an atomic level investigation is done to quantify the moisture damage of the asphalt binders. Binders used in this study include two Performance Grade (PG) base binders along with their modified counterparts using polyphosphoric acid (PPA), styrene-butadiene-styrene (SBS), and SBS plus PPA. Three different types of liquid anti-stripping agents (LAAs) are also evaluated in this study. The …

Design Synthesis Of Flexible Antennas Using Artificial Neural Network, Ali Isam Hammoodi

Theses and Dissertations

Nowadays, flexible devices have witnessed a great deal of interest in both industrial and academia. Consistently, flexible electronic systems require the integration of a conformal and flexible antenna operating in specific frequency bands to provide wireless connectivity which is highly demanded in today’s information-oriented society. Designing of microstrip antenna has become the focus of modern technologies due to their light weight, ease of fabrication, and ability to integrate electronics devices. Simple structure such has square patch, circular patch, or rectangular patch are easy to maintain using empirical equations which based on some experimental results. However, more complicated structures are hard …

Battery-Buffered Frequency-Controlled Smart Load With Time-Of-Use Energy Arbitrage, Ahmed Jabbar Abbas Zurfi

Theses and Dissertations

In existing long-established power systems, the grid control and balancing are implemented on the generation side in centralized schemes. As the use of renewable, non-dispatchable, inverter-based (inertia-less) energy sources is becoming increasingly pervasive in modern power systems, this paradigm will change and the need for decentralized demand-side control will be imperative to ameliorate the grid’s dynamic performance and stability. Battery energy storage (BES) is one of the essential constituents that will empower this transition. Battery energy storage systems (BESS) are eminent for their features of scalability, mobility, high energy density, and rapid response in tracking abrupt power fluctuations. These features …

Priming Of Grasping Muscles When Viewing A Safety Handle Is Diminished With Age, David A.E. Bolton, Sarah E. Schwartz, Manhoud Mansour, Garrett Rydalch, Douglas W. Mcdannald

Kinesiology and Health Science Faculty Publications

Merely viewing objects within reachable space can activate motor cortical networks and potentiate movement. This holds potential value for smooth interaction with objects in our surroundings, and could offer an advantage for quickly generating targeted hand movements (e.g. grasping a support rail to maintain stability). The present study investigated if viewing a wall-mounted safety handle resulted in automatic activation of motor cortical networks, and if this effect changes with age. Twenty-five young adults (18–30 years) and seventeen older adults (65+ years) were included in this study. Single-pulse, transcranial magnetic stimulation was applied over the motor cortical hand representation of young …

Smart Iot Sprinkler System, Galib F. Rahman

Publications and Research

The average family spends more than $1000 in water costs per year. One-way water is commonly wasted in many households is via inefficient sprinkler systems for lawns. Current technology has enabled the development of automatic sprinkler systems, which can be preconfigured to operate at desired times of day and intervals. Although these systems may reduce the amount of water utilized overall, they are not weather forecast aware. In situations when rainfall is upcoming the systems still water the lawn. In this project, we plan to implement a smart sprinkler system that has full awareness of upcoming weather and take account …

Transverse Anderson Localization In Optical Fibers: High-Quality Wave Transmission And Novel Lasing Applications, Behnam Abaie

Optical Science and Engineering ETDs

In this dissertation, transverse Anderson localization (TAL) of light mediated by disordered optical fibers is exploited for high-quality optical wave transmission and novel random lasing applications. En route, we first establish a powerful numerical platform for detailed investigation of TAL optical fibers (TALOF). Our approach is based on a modal perspective as opposed to beam propagation method (BPM) which was primarily used in the previous studies of TAL in disordered optical fibers. The versatile numerical tools developed in our simulations result in a potent methodology for simulation of TALOFs; the result is a fast and effective algorithm which can be …

Purdue Epics And Habitat For Humanity Partnership - Service-Learning For Over 20 Years, Trevor A. Drouillard, Sue Hunter

Engagement & Service-Learning Summit

For over twenty years, the Lafayette affiliate of Habitat for Humanity has partnered with the Purdue University EPICS program to connect students to real-world problems where they can learn engineering through experience. Past projects have focused on improving material storage methods, enhancing volunteer safety, developing energy-efficient building designs, and optimizing operational efficiency at Habitat for Humanity locations. The partnership is mutually beneficial for Habitat for Humanity – which benefits from the products students deliver – and for students – who learn how to apply engineering to real-world design. This poster represents a summary of what the EPICS – Habitat for …

Community-Scale Water Treatment Systems In The Dominican Republic, Jonathan Racey, Annabelle Papai, Elise Fischer, Becca Johnson

Engagement & Service-Learning Summit

Engagement and Service-Learning Summit: Reciprocal and Sustainable Partnerships

Exploring Large Pore Size Alumina And Silica-Alumina Based Catalysts For Decomposition Of Lignin, Sara Pourjafar, Jasmine Kreft, Honza Bilek, Evguenii Kozliak, Wayne Seames

Chemical Engineering Faculty Publications

Evaluation of copper doped silica-alumina and γ-alumina catalysts for lignin decomposition was conducted using a suite of chemical analysis protocols that enabled a comprehensive characterization of the reaction product. X-ray diffraction analysis was used to verify the concentration of doped copper on catalyst supports. Then, batch experiments were performed to study the significance of catalyst support type, catalyst dopant concentration, lignin concentration, catalyst-to-lignin ratio, reactor stirring rate and reaction time. Aqueous products were extracted with dichloromethane and analyzed using a detailed gas chromatography-mass spectrophotometry analytical protocol, allowing for quantification of over 20 compounds. Solid residues were analyzed by thermogravimetric analysis …

63rd Conference On Senior Engineering Design, College Of Engineering And Applied Sciences

Senior Engineering Design Conference

The 63rd Conference on Senior Engineering Design Projects. The conference was held from 9:00 a.m. to 3:00 p.m.,Tuesday, December 4, 2018 at the College of Engineering and Applied Sciences on the Parkview Campus of Western Michigan University. The College of Engineering and Applied Sciences sponsored the conference to showcase the work of its graduating seniors, who are required to complete a capstone project that puts into practice what they have learned. Many of the projects are sponsored by business and industry.

Attributing Accelerated Increases In Salinity In The Mediterranean Coastal Zone To Climate Change And Seawater Desalination Brine And The Resultant Unsustainability Of Modern Desalination Technology, Brandon W. Harper

HCNSO Student Capstones

Anthropogenic climate change influences our oceans on a global scale and has brought about increased salinity levels in large areas of our oceans such as the North Atlantic (Dunbar 2009). Concentrations of large scale desalination plants around small bodies of water add to this pattern and have shown even larger increases in salinity due to desalination brine discharge (Purnama et al., 2005). Salinity profile data over time should show similar increases in salinity in the Mediterranean Sea due to climate change and localized data should show increased salinity due to brine discharge. This study aims to pinpoint the extent of …

Rotating Mount For Complex Fluid Flow Research, Kirsten Murphy

Honors Theses

Fluid flow around rotating objects is mathematically complex and there is currently limited experimental data on the subject. To make Western Michigan University capable of this research, a rotating wind tunnel mount was developed. The mount design was integrated into the existing setup at the Applied Aerodynamics Laboratory (AAL) to allow seamless transitions between different research projects. Non-rotating and rotating disk prototypes were created from 3D-printed materials to test the mount’s capabilities. Experimental data gathered from utilizing this rotating mount was analyzed to understand the aerodynamic effects on rotating disks in a fluid stream. From testing the rotating disk prototype …

An Overpayment And Improved Reconciliation Process, Logan Wright

Honors Theses

Managerial errors in the form of late entry separations result in operating inefficiencies and excess costs to a company, as reconciliations will need to occur between paychecks issued and active employees versus separated employees. This is an issue that is currently plaguing Whirlpool Corporation (Whirlpool) in their U.S. operations. After the implementation of a plan to restructure their Human Resources (HR) Department and payroll unit to achieve HR Excellence, Whirlpool experienced problems with their payroll process resulting in inaccurate payments to separated employees. This senior project designed a two-phase process, first phase being prevention and second phase being a lean …

Rotating Mount For Complex Fluid Flow Research, Kirsten Murphy

Honors Theses

Fluid flow around rotating objects is mathematically complex and there is currently limited experimental data on the subject. To make Western Michigan University capable of this research, a rotating wind tunnel mount was developed. The mount design was integrated into the existing setup at the Applied Aerodynamics Laboratory (AAL) to allow seamless transitions between different research projects. Non-rotating and rotating disk prototypes were created from 3D-printed materials to test the mount’s capabilities. Experimental data gathered from utilizing this rotating mount was analyzed to understand the aerodynamic effects on rotating disks in a fluid stream. From testing the rotating disk prototype …

Arts Integration Into Elementary Science: Force And Motion And Natural Disasters, Eric C. Ooms, Tabitha M. Wu, Ashley R. Kokemuller, Sarah E. Montgomery, Audrey C. Rule

Journal of STEM Arts, Crafts, and Constructions

This study explored the effect of arts integration into science during an instructional unit on force and motion and one addressing natural weather disasters. Seventy-eight elementary students in four classrooms (grade 5, grade 4, and two at grade 3) participated in the study. This study assessed content retention, student-made products (rollercoasters and hurricane shelters), and student attitudes. All students in each classroom experienced the two units of instruction, one unit in the experimental condition of arts integration and one unit in the control condition without arts integration. Both conditions involved students in constructing models of given materials. Each unit consisted …

Second Grade Students Learn About Civil Engineers And Erosion, Andrea Earline Anderson, Jessica A. Meier

Journal of STEM Arts, Crafts, and Constructions

The integration of art into curricula focused on teaching science is a new perspective in education designed to reach a broader range of students. The current study examined the process of second-grade students participating in science and art activities through qualitative content analysis. The subjects of science and art were not taught to the students separately, rather, students engaged in both subjects simultaneously, in an integrated manner. Participants were 23 second-grade students (11 female and 12 male; age range 7 to 8 years) who were learning about erosion through sketching and creative construction and the work of civil engineers through …

Ecosystem Shake Up: An Environmental Change Adaptation Project, Hannah E. Morgan, Dana Atwood-Blaine, Audrey C. Rule

Journal of STEM Arts, Crafts, and Constructions

This practical article reports an intriguing diorama project for third grade elementary students (ages 8-9 years). Students worked as partners to create dioramas of given ecosystems made in pizza boxes. Then, students rolled a die to determine a change in some environmental factor that affected the ecosystem. The students discussed how this change affected the ecosystem and made a second part of their diorama showing the ecosystem after the change. Finally, students made class presentations concerning their dioramas and ideas. A rubric for assessing the projects is included. Results of this science project indicate that students became deeply engrossed in …

Exploring The Physics Of Sound With Steam-Azing Third Graders, Page L. Foss, Kyrie D. Borsay

Journal of STEM Arts, Crafts, and Constructions

This practical article was based on a lesson conducted with third graders from an elementary school in the Midwest who were studying concepts about sound. The lesson activities address Next Generation Science Standards that include engineering concepts, along with integrating activities that support National Core Arts Standards. The students created instruments that made music but that were not the standard string, percussion or wind orchestral instruments that they had previously studied: string, percussion, or wind. Their instruments made of recycled materials included drum and shaker combinations, animal-shaped instruments, and instruments that combined three or more instruments.

Science Through Art: Motivating Gifted And Talented Students, Ksenia Zhbanova

Journal of STEM Arts, Crafts, and Constructions

Gifted and talented students have unique characteristics and needs. Arts Integration is an effective differentiation strategy that helps meeting these students’ needs. STEM subjects are easily and organically integrated with the Arts because scientific and artistic inquiry are very similar. This practical article describes an arts-integrated project that provided the gifted and talented participants with an increased level of challenge, an opportunity for self-expression and for building social skills, amplified motivation, and a chance to deepen and demonstrate their knowledge of science, technology, engineering, mathematics, social studies and English Language Arts. In this project, identified gifted students completed figural transformations …