Engineering Commons^™

The Role Of Digitisation In The Strategic Planning Process Of Irish Quantity Surveying(Qs) Practices, Michael Adesi, Roisin Murphy, Dermot Kehily

Conference papers

Digitisation is important to the transformation of many aspects of the construction industry such as strategic planning process in QS practices. Quantity Surveying (QS) practices largely apply digital technologies in construction project delivery, while neglecting the use of digital technologies in the strategic planning process. The aim of this paper is to investigate the role of digitisation in the strategic planning process of QS practices operating in Ireland. The study adopts a quantitative research methodology which is the first phase of an ongoing research project, by administering survey questionnaires to senior management of QS practices in Ireland. The findings of …

An Efficient Process For Co-Production Of Γ-Aminobutyric Acid And Probiotic Bacillus Subtilis Cells, Hongbo Wang, Jinge Huang, Lei Sun, Fuchao Xu, Wei Zhang, Jixun Zhan

Biological Engineering Faculty Publications

This study was to establish an integrated process for the co-production of γ-aminobutyric acid (GABA) and live probiotics. Six probiotic bacteria were screened and Bacillus subtilis ATCC 6051 showed the highest GABA-producing capacity. The optimal temperature and initial pH value for GABA production in B. subtilis were found to be 30 °C and 8.0, respectively. A variety of carbon and nitrogen sources were tested, and potato starch and peptone were the preferred carbon and nitrogen sources for GABA production, respectively. The concentrations of carbon source, nitrogen source and substrate (sodium L-glutamate) were then optimized using the response surface methodology. The …

Statistically Guided Synthesis Of Mov- Based Mixed Oxide Catalysts For Ethane Partial Oxidation, Juan D. Jimenez, Kathleen Mingle, Teeraya Bureerug, Cun Wen, Jochen Lauterbach

Faculty Publications

The catalytic performance of Mo8V2Nb1-based mixed-oxide catalysts for ethane partial oxidation is highly sensitive to the doping of elements with redox and acid functionality. Specifically, control over product distributions to ethylene and acetic acid can be afforded via the specific pairing of redox elements (Pd, Ni, Ti) and acid elements (K, Cs, Te) and the levels at which these elements are doped. The redox element, acid element, redox/acid ratio, and dopant/host ratio were investigated using a three-level, four-factor factorial screening design to establish relationships between catalyst composition, structure, and product distribution for ethane partial oxidation. Results show that the balance …

Statistically Guided Synthesis Of Mov-Based Mixed-Oxide Catalysts For Ethane Partial Oxidation, Juan D. Jimenez, Kathleen Mingle, Teeraya Bureerug, Cun Wen, Jochen A. Lauterbach

Faculty Publications

The catalytic performance of Mo8V2Nb1-based mixed-oxide catalysts for ethane partial oxidation is highly sensitive to the doping of elements with redox and acid functionality. Specifically, control over product distributions to ethylene and acetic acid can be afforded via the specific pairing of redox elements (Pd, Ni, Ti) and acid elements (K, Cs, Te) and the levels at which these elements are doped. The redox element, acid element, redox/acid ratio, and dopant/host ratio were investigated using a three-level, four-factor factorial screening design to establish relationships between catalyst composition, structure, and product distribution for ethane partial oxidation. Results show that the balance …

Techedsat 7 And 8-Nasa Missions For Earth Observation, Andrew Pham

STAR Program Research Presentations

Big results can come from small satellites, and Technology Educational Satellite 8 or TES-8 is the latest small satellite in the TechEdSat series from NASA Ames Research Center. TechEdSat is a collaborative program, in which advanced university students have a chance to work directly with researchers on NASA Space Projects. Thanks to the assistance of students from several universities around the country every year, TechEdSat has helped NASA develop Nano-satellite technologies and evaluate new ideas for future spacecraft. TES-8 is the eighth satellite of the continuing TechEdSat series. On December 01, 2018 TES-8 followed a Commercial Resupply Service mission to …

Report Of Community Conversations About Gender Roles In Livestock, Mamusha Lemma, Wole Kinati, Annet Mulema, Zekarias Bassa, Abiro Tigabe, Hiwot Desta, Mesfin Mekonnen, Tadious Asfaw

Daugherty Water for Food Global Institute: Faculty Publications

The International Livestock Research Institute (ILRI) and the International Center for Research in the Dry Areas (ICARDA) gender and animal health teams facilitated community conversations (CCs) about gender roles in livestock husbandry in three districts in the Southern Nations, Nationalities and Peoples Region (SNNPR) and Amhara region from 30 May–07 June 2018. These dictricts were: Doyogena (Hawora Arara and Ancha Sadicha kebeles) of SNNPR from 30 and 31 May; and Menz Gera district (Sine Amba kebele) and Menz Mama district (Key Afer kebele) of Amhara from June 6–7. In Doyogena, the team held the conversations in farmer training centres (FTCs) …

Wave Energy Converter Array Optimization: A Genetic Algorithm Approach And Minimum Separation Distance Study, Chris Sharp, Bryony Dupont

Faculty Publications - Biomedical, Mechanical, and Civil Engineering

With the need to integrate renewable energy sources into the current energy portfolio and the proximity of power consumers to ocean coastlines, it is important to evaluate marine energy systems, specifically wave energy converters (WECs), as potential solutions for meeting electricity needs. The ability to model these systems computationally is vital to their eventual deployment. The power development, economics, grid integration requirements, operations and maintenance requirements, and ecological impacts must be understood before these devices are physically installed. However, the research area of WEC array optimization is young, and the few available results of previously implemented optimization methods are preliminary. …

Exploring The Efficiency And Cost Limits Of Fractional Hp Axial Flux Pm Machine Designs, Narges Taran, Vandana Rallabandi, Greg Heins, Dan M. Ionel

Power and Energy Institute of Kentucky Faculty Publications

Optimizing the design of electric machines is a vital step in ensuring the economical use of active materials. The three-dimensional flux paths in axial flux PM (AFPM) machines necessitate the use of computationally expensive 3D electromagnetic analysis. Furthermore, a large number of design evaluations is required to find the optimum, causing the total computation time to be excessively long. In view of this, a two-level surrogate assisted algorithm capable of handling such expensive optimization problems is introduced, which substantially reduces the number of FEA evaluations. The proposed algorithm is employed to optimally design an AFPM machine within a specified envelope, …

Illuminator, Volume 2, Issue 1, Batten College Of Engineering And Technology, Old Dominion University

College of Engineering & Technology Newsletter

September 2018 issue of Illuminator, a monthly publication of ODU's Batten College of Engineering and Technology.

Benchmarking The Application Of Detached Eddy Simulation Techniques In Data Center Server Flow Modelling Using Stereoscopic Particle Image Velocimetry, Sajad Alimohammadi, Jaakko Mcevody, Yan Delauré, Tim Persoons

Conference Papers

The evolution and new trends in low-cost cloud computing services and growing data analysis loads on data centers keep increasing the power density of the servers as well as the global electricity consumption of data centers. The server component arrangement is mainly bounded by compactness of the device and can be somewhat overlooked. Both optical visualization and computational simulation techniques can be utilized to quantify complex turbulent flow fields inside the servers, and thus optimize thermal flows. The primary stage of a comprehensive research to enhance data center server cooling performance and energy efficiency is reported on here. A full-scale …

Nonprehensile Manipulation Of Deformable Objects: Achievements And Perspectives From The Rodyman Project, Aykut C. Satici

Mechanical and Biomedical Engineering Faculty Publications and Presentations

The goal of this work is to disseminate the results achieved so far within the RODYMAN project related to planning and control strategies for robotic nonprehensile manipulation. The project aims at advancing the state of the art of nonprehensile dynamic manipulation of rigid and deformable objects to future enhance the possibility of employing robots in anthropic environments. The final demonstrator of the RODYMAN project will be an autonomous pizza maker. This article is a milestone to highlight the lessons learned so far and pave the way towards future research directions and critical discussions.

Comparative Investigation Of Thermal And Structural Behavior In Renewably Sourced Composite Films Of Even-Even Nylons (610 And 1010) With Silk Fibroin, Kayla Calloway, Ye Xue, Vincent Altimari, Guoxiang Jiang, Xiao Hu

College of Science & Mathematics Departmental Research

As the average life expectancy continues to increase, so does the need for resorbable materials designed to treat, augment, or replace components and functions of the body. Naturally occurring biopolymers such as silks are already attractive candidates due to natural abundance and high biocompatibility accompanied by physical properties which are easily modulated through blending with another polymer. In this paper, the authors report on the fabrication of biocomposite materials made from binary blends of Bombyx mori silk fibroin (SF) protein and renewably sourced low molecular weight nylon 610 and high molecular weight nylon 1010. Films were characterized using scanning electron …

Where There Is No Engineer - Designing For Community Resilience, Liam Mccarton, Sean O'Hogain

Books/Book Chapters

Where There Is No Engineer – Designing for Community Resilience” is a design initiative coordinated by the Development Technology in the Community (DTC) Research Group, Technological University Dublin (DIT) and Engineers Without Borders (EWB) Ireland.

The programme is delivered in partnership with various development partners and Engineers Ireland. It provides participants with the opportunity to learn about design, teamwork and communication through real, inspiring, sustainable and crosscultural development projects. By participating in the programme, students and professionals will have the opportunity to design creative solutions to real life development projects. This initiative formed part of the DIT team submission which …

Atomically Dispersed Pd On Nanodiamond/Graphene Hybrid For Selective Hydrogenation Of Acetylene, Fei Huang, Yuchen Deng, Yunlei Chen, Xiangbin Cai, Mia Peng, Zhimin Jia, Pengju Ren, Dequan Xiao, Xiaodong Wen, Ning Wang, Hongyang Liu, Ding Ma

Chemistry and Chemical Engineering Faculty Publications

An atomically dispersed palladium (Pd) catalyst supported onto a defective nanodiamond-graphene (ND@G) is reported here for selective hydrogenation of acetylene in the presence of abundant ethylene. The catalyst exhibits remarkable performance for the selective conversion of acetylene to ethylene: high conversion (100%), ethylene selectivity (90%), and good stability (i.e., steady for at least 30 hours). The unique struc-ture of the catalyst (i.e., atomically dispersion of Pd atoms on graphene through Pd-C bond anchoring) ensure the facile desorption of ethylene against the over-hydrogenation of ethylene to undesired ethane, which is the key for the outstanding selectivity of the catalyst.

Crystal Misorietation And Defect Generation During Contact Between Two Aluminum Substrates, Milad Khajehvand

Mechanical Engineering Master's Theses

With the use of molecular dynamics simulations, the nanoscale contact between two aluminum substrates at room temperature is studied. The so-called jump-to-contact (JC) phenomenon between (111) surfaces is observed to occur for interfacial distances below 5.8 ± 0.05 Å. This critical distance is approximately equal to 2.5 times the interplanar spacing of (111) planes in a perfect aluminum crystal at 300 K. The critical distance for JC is shown to be higher at higher contact temperatures because of the higher amplitude of atomic vibrations. The effect of employed interatomic potential on the critical distance is also discussed.

The critical distance …

Inspire E-News 09 2018, College Of Engineering And Applied Sciences

College of Engineering and Applied Sciences News

• Undergraduate Programs Receive Accreditation
• Welcome to New Faculty
• Pete Thannhauser: Honored for Distinguished Service to WMU
• Harry Potter is the Theme at Annual Passport Day
• Mallak named Fellow of ASEM
• Options for Cybersecurity Training Expands
• Please join us!
• Faculty Receives Best Paper Award
• Student Soars High with Aircraft Demonstration

The Effect Of Ultrasonic Power In Aluminum Wire Bonding Hardness Profiles, Matthew D. Mckay

Mechanical Engineering Master's Theses

Ultrasonic wire bonding is a critical process used widely across the microelectronics industry. Despite its ubiquity, there is a breadth of literature and ongoing active research into the basic principles of wire bonding. In particular, the effects of ultrasonic bonding on material properties are not fully understood. This thesis presents the effects of different ultrasonic bond powers on material properties. The changes in mechanical properties were measured by collecting Vickers microhardness data and nanoindentation data. The hardness in the bonded wire varied with two parameters: the distance from the bond interface, and the applied ultrasonic power. The hardness varied 5 …

Optical-Fiber-Based Smart Concrete Thermal Integrity Profiling: An Example Of Concrete Shaft, Ruoyu Zhong, Ruichang Guo, Wen Deng

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Concrete is currently the most widely used construction material in the world. The integrity of concrete during the pouring process could greatly affect its engineering performance. Taking advantage of heat production during the concrete curing process, we propose an optical-fiber-based thermal integrity profiling (TIP) method which can provide a comprehensive and accurate evaluation of the integrity of concrete immediately after its pouring. In this paper, we use concrete shaft as an example to conduct TIP by using the optical fiber as a temperature sensor which can obtain high spatial resolution temperature data. Our method is compared with current thermal infrared …

Rheological Properties Of Warm Mix Asphalt Binders And Warm Mix Asphalt Binders Containing Polyphosphoric Acid, Jun Liu, Kezhen Yan, Jenny Liu

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This paper presents the laboratory investigation of properties of warm mix asphalt (WMA) binders and WMA binders containing polyphosphoric acid (PPA).Two types of warm mix additives were used to produce the WMA binders. Superpave tests were carried out on original and short-term aged binders through the rotational viscometer, the dynamic shear rheometer (DSR), and the bending beam rheometer (BBR). The results indicated that the WMA binders with different warm mix additives showed different viscosity values, however, the addition of PPA remarkably increased the viscosity values of these two kinds of WMA binders used, in the present study, to a similar …

Enginews, September 2018, School Of Computer Science & Engineering Institution: Sacred Heart University

News, Magazines and Reports

No abstract provided.

Ce 350-101: Transportation Engineering, Joyoung Lee

Civil and Environmental Engineering Syllabi

No abstract provided.

Mech 320-101: Statics And Mechanics Of Materials, Joseph Baladi

Civil and Environmental Engineering Syllabi

No abstract provided.

Numerical Simulation Study On Miscible Eor Techniques For Improving Oil Recovery In Shale Oil Reservoirs, Dheiaa Alfarge, Mingzhen Wei, Baojun Bai

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Shale formations in North America such as Bakken, Niobrara, and Eagle Ford have huge oil in place, 100—900 billion barrels of oil in Bakken only. However, the predicted primary recovery is still below 10%. Therefore, seeking for techniques to enhance oil recovery in these complex plays is inevitable. Although most of the previous studies in this area recommended that CO₂ would be the best EOR technique to improve oil recovery in these formations, pilot tests showed that natural gases performance clearly exceeds CO₂ performance in the field scale. In this paper, two different approaches have been integrated to …

Ce 333-001-003: Reinforced Concrete Design, M Ala Saadeghvaziri

Civil and Environmental Engineering Syllabi

No abstract provided.

Mech 234-001-003: Engineering Mechanics: Statics, G Milano

Civil and Environmental Engineering Syllabi

No abstract provided.

Ce 332-001: Structural Analysis, Eduardo Castro

Civil and Environmental Engineering Syllabi

No abstract provided.

Ce 200a - Surveying Lab, Allison Lapatka

Civil and Environmental Engineering Syllabi

No abstract provided.

Ce 360-001: Sustainable Civil Engineering Materials, Matthew Adams

Civil and Environmental Engineering Syllabi

No abstract provided.

Individual And Community Quality Of Life In Nonmetropolitan Nebraska: Nebraska Rural Poll Research Report 18-3, Rebecca Vogt, Cheryl A. Burkhart-Kriesel, Randolph Cantrell, Brad Lubben, Larry J. Mcelravy Jr., Timothy Meyer

Rural Futures Institute: Publications

Table of Contents

Executive Summary

Introduction

Trends in Community Ratings (1996–2018)

Community Change, 1996–2018

Expected Community Change Ten Years from Now: 2011–2018

Expected Destination of Those Planning to Move: 1998–2018

Proportions of Respondents Very or Somewhat Satisfied with Each Service, 1997–2018

The Community and Its Attributes in 2018

Perceptions of Community Change by Region

Expected Community Change in Ten Years by Community Size

Feelings of Community Powerlessness by Region

Satisfaction with Retail Shopping by Region

Satisfaction with Cost of Housing by Community Size

Satisfaction with Cellular Phone Service by Community Size

Opinions About Community

Change in Community Political Discussions during …

Sociodemographics And Access To Organic And Local Food: A Case Study Of New Orleans, Louisiana, Chuo Li, Amir Ghiasi, Xiaopeng Li, Guangqing Chi

Civil and Environmental Engineering Faculty Publications

This study examined the association between physical accessibility to organic and local food, and sociodemographic factors in New Orleans, Louisiana. Spatial regression models were used to investigate how sociodemographic variables such as income, race/ethnicity, education, and age correlate with driving, bicycling, and walking distances to stores that sell organic or local food. The distances were calculated from GIS and real-time speed information from Google Maps. The results indicated that physical access to such stores is positively associated with population density, median housing value, education, non-Hispanic Blacks, and Hispanics, and is negatively associated with median housing age. We found no disparities …