Engineering Commons^™

Mechanisms Of Impaired Motor Unit Firing Behavior In The Vastus Lateralis Muscle After Stroke, Spencer Murphy

Dissertations (1934 -)

The purpose of this dissertation research project was to examine the role of impaired motor unit firing behavior on force generation after a stroke. We studied the relationship between intrinsic motoneuron properties and inhibitory sensory pathways to deficient motoneuron activity in the vastus lateralis muscle after a stroke. Individuals with stroke often have deficits with force generation and volitional relaxation. Current models of impaired force output after a stroke focus primarily on the pathology within the corticospinal pathway because of decreased descending drive. Though this is an important aspect of deficient motoneuron output, it is incomplete because motoneurons receive other …

Dynamic Lifetime Reliability And Energy Management For Network-On-Chip Based Chip Multiprocessors, Milad Ghorbani Moghaddam

Dissertations (1934 -)

In this dissertation, we study dynamic reliability management (DRM) and dynamic energy management (DEM) techniques for network-on-chip (NoC) based chip multiprocessors (CMPs). In the first part, the proposed DRM algorithm takes both the computational and the communication components of the CMP into consideration and combines thread migration and dynamic voltage and frequency scaling (DVFS) as the two primary techniques to change the CMP operation. The goal is to increase the lifetime reliability of the overall system to the desired target with minimal performance degradation. The simulation results on a variety of benchmarks on 16 and 64 core NoC based CMP …

Hypothesis Paper: Mechanism For Primary Blast Induced Traumatic Brain Injury With Minimal Head Motion, Charles F. Babbs

Weldon School of Biomedical Engineering Faculty Working Papers

Transit of the human skull by blast waves produces diffuse brain injury. The exact mechanisms are unknown. This paper describes plausible mechanisms in which steep intracranial pressure gradients, demonstrated in prior computational models of blast-skull interaction, produce subsequent deformation and motion of the whole brain within the skull, without obvious movement of the head. Equations of motion are derived to describe the acceleration, velocity, and relative position of both the skull and the brain in response to known extracranial and intracranial pressures both during and several hundred milliseconds after blast wave passage. A finite element model is solved to visualize …

Indutivo: Contact-Based, Object-Driven Interactions With Inductive Sensing, Jun Gong, Xin Yang, Teddy Seyed, Josh Urban Davis, Xing-Dong Yang

Dartmouth Scholarship

We present Indutivo, a contact-based inductive sensing technique for contextual interactions. Our technique recognizes conductive objects (metallic primarily) that are commonly found in households and daily environments, as well as their individual movements when placed against the sensor. These movements include sliding, hinging, and rotation. We describe our sensing principle and how we designed the size, shape, and layout of our sensor coils to optimize sensitivity, sensing range, recognition and tracking accuracy. Through several studies, we also demonstrated the performance of our proposed sensing technique in environments with varying levels of noise and interference conditions. We conclude by presenting demo …

Battery-Free Eye Tracker On Glasses, Tianxing Li, Xia Zhou

Dartmouth Scholarship

This paper presents a battery-free wearable eye tracker that tracks both the 2D position and diameter of a pupil based on its light absorption property. With a few near-infrared (NIR) lights and photodiodes around the eye, NIR lights sequentially illuminate the eye from various directions while photodiodes sense spatial patterns of reflected light, which are used to infer pupil’s position and diameter on the fly via a lightweight inference algorithm. The system also exploits characteristics of different eye movement stages and adjusts its sensing and computation accordingly for further energy savings. A prototype is built with off-the-shelf hardware components and …

Exploring Experiential Learning Model And Risk Management Process For An Undergraduate Software Architecture Course, Eng Lieh Ouh, Yunghans Irawan

Research Collection School Of Computing and Information Systems

This paper shares our insights on exploring theexperiential learning model and risk management process todesign an undergraduate software architecture course. The keychallenge for undergraduate students to appreciate softwarearchitecture design is usually their limited experience in thesoftware industry. In software architecture, the high-level designprinciples are heuristics lacking the absoluteness of firstprinciples which for inexperienced undergraduate students, thisis a frustrating divergence from what they used to value. From aneducator's perspective, teaching software architecture requirescontending with the problem of how to express this level ofabstraction practically and also make the learning realistic. Inthis paper, we propose a model adapting the concepts ofexperiential learning …

Teaching Adult Learners On Software Architecture Design Skills, Eng Lieh Ouh, Yunghans Irawan

Research Collection School Of Computing and Information Systems

Software architectures present high-level views ofsystems, enabling developers to abstract away the unnecessarydetails and focus on the overall big picture. Designing a softwarearchitecture is an essential skill in software engineering and adultlearners are seeking this skill to further progress in their career.With the technology revolution and advancements in this rapidlychanging world, the proportion of adult learners attendingcourses for continuing education are increasing. Their learningobjectives are no longer to obtain good grades but the practicalskills to enable them to perform better in their work and advancein their career. Teaching software architecture to upskill theseadult learners requires contending with the problem of …

Implementation Of Secure Dnp3 Architecture Of Scada System For Smart Grids, Uday Bhaskar Boyanapalli

Master of Science in Computer Science Theses

With the recent advances in the power grid system connecting to the internet, data sharing, and networking enables space for hackers to maliciously attack them based on their vulnerabilities. Vital stations in the smart grid are the generation, transmission, distribution, and customer substations are connected and controlled remotely by the network. Every substation is controlled by a Supervisory Control and Data Acquisition (SCADA) system which communicates on DNP3 protocol on Internet/IP which has many security vulnerabilities. This research will focus on Distributed Network Protocol (DNP3) communication which is used in the smart grid to communicate between the controller devices. We …

Efficient Attribute-Based Encryption With Blackbox Traceability, Shengmin Xu, Guomin Yang, Yi Mu, Ximeng Liu

Research Collection School Of Computing and Information Systems

Traitor tracing scheme can be used to identify a decryption key is illegally used in public-key encryption. In CCS’13, Liu et al. proposed an attribute-based traitor tracing (ABTT) scheme with blackbox traceability which can trace decryption keys embedded in a decryption blackbox/device rather than tracing a well-formed decryption key. However, the existing ABTT schemes with blackbox traceability are based on composite order group and the size of the decryption key depends on the policies and the number of system users. In this paper, we revisit blackbox ABTT and introduce a new primitive called attribute-based set encryption (ABSE) based on key-policy …

Enhancing The Durability And The Service Life Of Asphalt Pavements Through Innovative Light-Induced Self-Healing Materials, Marwa Hassan

Publications

The objective of this study was to evaluate the efficiency of a new generation of Ultraviolet (UV) light-induced selfhealing polymers in enhancing the durability and self-healing properties of asphalt mixtures. Self-healing polymers were successfully synthesized in the laboratory and were characterized using Fourier Transform Infrared Spectroscopy (FTIR). In addition, Thermogravimetric Analysis (TGA) results showed that the synthesized polymers achieved the required thermal stability to resist asphalt mixture production processes. Viscosity results showed that addition of 5% Recycled Asphalt Shingle (RAS) and/or 20% Reclaimed Asphalt Pavement (RAP) caused an increase in the viscosity of the binder blends. However, a reduction in …

Evaluation Of The Performance And Cost-Effectiveness Of Engineered Cementitious Composites (Ecc) Produced From Region 6 Local Materials, Gabriel Andres Arce Amador, Tyson Rupnow, Marwa Hassan

Publications

The project objective is to develop cost-effective Engineered Cementitious Composites (ECC) with locally available ingredients in Region 6 to address the deficiencies observed in ordinary concrete materials. The study explored the utilization of two types of river sands (coarse and fine), two types of PVA fibers (long and short), four levels of cement replacement with Class F fly ash, and the implementation of recycled crumb rubber in the performance of ECC materials. A total of 24 mix designs were prepared and evaluated in compression, tension, and bending to assess its mechanical properties. Furthermore, the cracking characteristics of the materials produced …

Modeling Sulfate Attack In Modern Concrete For Building Sustainable And Resilient Infrastructure, Zachary Grasley

Publications

External sulfate attack is a complex phenomenon and is manifested in the form of large expansion, cracking, and spalling depending on the exposure solution and material constituent properties. Several models were developed in the past to demonstrate sulfate attack mechanisms that account for the diffusion of sulfate ions into the porous concrete and the successive deformation triggered by the chemical reaction and precipitation of expansive agents. However, none of these models accounts for the effect of the migration of solvent water from the low solute concentration solution to high solute concentration solution driven by the osmotic pressure. Osmotic pressure is …

In-Situ Mechanical Characterization For Compacted Aggregates, Douglas Cortes, Paola Bandini

Publications

The evaluation of compacted unbound aggregate layers is perhaps the most common undertaking in transportation-related projects. The assessment of compaction compliance in engineered fills, subgrades, subbases, and bases in roadways and railways is central to ensure longevity of ground transportation infrastructure. In many cases, premature failures in roadways that originate in the unbound aggregate layers can be traced back to inadequate compaction. These failures are preventable, provided the problem areas can be identified by a suitable field test during construction. The most widely used method for compaction assessment during construction is the nuclear density gauge (NDG) test. While the device …

Bridge Inspecting With Unmanned Aerial Vehicles R&D, Paul Darby, Vijaya Gopu

Publications

The project achieves through research including literature, on site interviews, and experimentation: 1) a recommendation for a UAV-based system to practically assist in routine bridge inspection work in the State of Louisiana, 2) the identification and description of advantages, disadvantages, and limitations in the use of UAVs for routing bridge inspection work in Louisiana, and 3) provided recommendations for future work. The Yuneec H520 aircraft and its E90 camera are recommended, as is the need for a boat to be included as part of the system. The recommended system has advantages in reaching portions of the bridge that are difficult …

Use Of Rice Hull Ash (Rha) As A Sustainable Source Of Construction Material, Zahid Hossain, Ashraf Elsayed

Publications

With the imminent shortage of natural resources, the need to find sustainable development is the highest in recent history. Therefore, this study examines the potential uses of Rice Hull Ash (RHA) as a sustainable cementitious material (SCM) in preparation of concrete. This study also assesses the use of RHA as an alternative of commonly used polymers in preparing high-grade asphalt binders. RHA is a potential sustainable solution because it is currently being treated as an agricultural waste material, yet its high silica content makes it a potential construction material. Three different sizes of RHA (600 µm, 150 µm, and 44 …

Thermochemical Conversion Of Biomass: Detailed Gasification And Near-Burner Co-Firing Measurements, Jacob B. Beutler

Theses and Dissertations

An increasing emphasis on mitigating global climate change (global warming) over the last few decades has created interest in a broad range of sustainable or alternative energy systems to replace fossil fuel combustion. Biomass, when harvested responsibly, is a renewable fuel with many uses in replacing fossil fuels. Cofiring biomass with coal in traditional large-scale coal power plants represents one of the lowest risk, least costly, near-term methods of CO₂ mitigation. Simultaneously, it is one of the most efficient and inexpensive uses of biomass. Alternatively, biomass can be transformed into useful products through gasification to produce clean syngas for …

Phasorsec: Protocol Security Filters For Wide Area Measurement Systems, Prashant Anantharaman, Kartik Palani, Rafael Brantley, Sergey Bratus, Sean W. Smith

Dartmouth Scholarship

The addition of synchrophasors to the power grid to improve observability comes at the cost of an increased attack surface: the wide area measurement system. A common source of zero-days, that can be used to exploit the system, is improper input validation. The strict availability and timing requirements of the grid make it critical that input validation be done right and in a timely fashion. PhasorSec is a hardened security filter for the synchrophasor communication protocol, C37.118. PhasorSec is built using language theoretic principles which treat all input as a language with a specific grammar that defines what input must …

Open Source Low-Cost Power Monitoring System, Shane W. Oberloier, Joshua M. Pearce

Department of Materials Science and Engineering Publications

This study presents an entirely open-source, low-cost power monitoring system capable of many types of measurements including both loads and supplies such as solar photovoltaic systems. In addition, the system can be fabricated using only open source software and hardware. The design revolves around the Digital Universal Energy Logger (DUEL) Node, which is responsible for reading and properly scaling the voltage and current of a particular load, and then serializing it via an on-board ATTiny85 chip. The configuration of the DUEL node allows for custom sensitivity ranges, and can handle up to 50 A and 300 V. Up to 127 …

Fall 2018 Biomedical Engineering Newsletter, Department Of Biomedical Engineering, Michigan Technological University

Department of Biomedical Engineering Newsletters

Table of Contents

• Global Research, Local Impact: Keat Ghee Ong
• Mechanobiology: Sangyoon Han Measures Cellular Force
• Rupak Rajachar Accelerates Healing in Humans - and Whales
• Optical Elastography Gathers Better Data for Avon
• Making Stents: NSF Graduate Research Fellow Roger Guillory

Group O - Lacrosse Ball Passer, Mackenzie Gordon, Jake Mennemeier, Conor Pellas

Mechanical Engineering Design Project Class

The goal of our design group was to make a lacrosse ball passer that could be used in a team practice or individual setting. Wayne Jaekle, WashU’s head lacrosse coach defined major customer needs as producing a consistent pass speed and angle, an interactive interface allowing an automatic time interval between passes, and being easy to load. These needs lead to our main design goals: 1. A ball capacity of 30, 2. A minimum pass speed of 30 mph, and 3. A 5 second time interval between passes. Mock ups and brainstorming exercises led to our team’s selection of a …

Asme Design Competition - Group H, Melanie Self, Ben Tattersfield, Joshua Emde

Mechanical Engineering Design Project Class

This document presents our solution for the ASME pick-and-place design competition. In brief, the challenge is to collect balls from an arena and return them to a ‘home base’. The specifics of the competition are elaborated on within. The document walks through the design decisions that went into the prototype; the Goalkeeper concept that we ultimately landed on best solved the problems presented by the challenge statement as interpreted by our customer, Dr. James Jackson Potter. Several of the design choices were made by applying mathematical relationships, with the math and results included to illuminate our methods. We include a …

Anisotropic Tissue Maker, Jake Ireland, Jaryd Huffman, Sarah Mohrmann, Daniel Cano

Mechanical Engineering Design Project Class

Traumatic brain injury (TBI) is a common injury that is not thoroughly understood. Data on brain mechanics and motion are not abundant during the time of impact. In order to accumulate more data and achieve a better understanding of how the injury occurs tissue mimics can be made.

T-Shirt Square Cutter, Austin Chawgo, Kendall Weishaar, Samir Lopez

Mechanical Engineering Design Project Class

Each year, Americans waste millions of pounds of textiles in the form of clothing that is thrown away. Professor Mary Ruppert-Stroescu from the Sam Fox School of Design seeks to combat this by reusing the old fabric from discarded clothes and creating new, fashionable clothing. To do this, her and her students cut up donated shirts into small squares, by hand, using scissors and fabric cutters and sew them together using a method developed by her.. This process is very time consuming and limits the commercial viability of this process. The T-shirt Cutter design, detailed below, has the potential to …

Residential Automatic Door Opener, Steven Downs, Ardian Pollo, Ethan Bredemeier

Mechanical Engineering Design Project Class

This project proposes an innovative design for an automatic door opener intended for external doors of residential homes. The intended customers are elderly and disabled people who may benefit from such a device while entering and exiting their homes. The goal is to create an affordable product to compete with existing products that are relatively expensive to make such devices more accessible.

Universal Tube Fixture, Griffin Kivitz, Matthew Whitehill, Jason Hsu

Mechanical Engineering Design Project Class

The goal of this design project was to create a device that can aid in the assembly of glue joints between concentric tubes. In many medical devices, whether they be laser probes, retractable injectors, or other devices with actuating parts, there are often concentric glue joints. The problem we are trying to solve is controlling where the 2 tubes are relative to one another when they are glued.

Lacrosse Ball Passing Machine, William Galik, Daniel Finer, Matt Jenkins

Mechanical Engineering Design Project Class

Design and build a lacrosse ball passing machine that utilizes an automated ball sorting mechanism to shoot balls up to 60 mph with 80 percent accuracy at a 1 square yard target.

Arliss Competition Canister Vehicle, Jessie Goldberg, Nicholas Cornejo, Tyler Smith, Rachel Kershner

Mechanical Engineering Design Project Class

For our project, we designed a canister vehicle that fits the design specifications of the ARLISS competition. For the ARLISS competition, the vehicles are loaded into a rocket, launched approximately 10,000 feet into the air, released, and then must autonomously navigate to a predetermined target on the ground. Because of our time restraint, we are focused on designing a vehicle of the correct dimensions (a maximum mass of 1050g, a maximum diameter of 146mm, and a maximum height of 240mm) that can simply travel on the ground over multiple types of terrain. Additionally, we designed a parachute release mechanism so …

Electrostatic Design And Conditioning Of A Triple Point Junction Shield For A −200 Kv Dc High Voltage Photogun, G. Palacios-Serrano, F. Hannon, C. Hernandez-Garcia, M. Poelker, H. Baumgart

Electrical & Computer Engineering Faculty Publications

Nuclear physics experiments performed at the Continuous Electron Beam Accelerator Facility (CEBAF) at the Jefferson Lab require a DC high voltage photogun to generate polarized electron beams from GaAs photocathodes. The photogun uses a tapered ceramic insulator that extends into the vacuum chamber and mechanically holds the cathode electrode. Increasing the operating voltage from nominal −130 kV to −200 kV will provide lower beam emittance, better transmission through injector apertures, and improved photocathode lifetime. This desire to increase the photogun operating voltage led to the design of a triple-point-junction shield electrode which minimizes the electric field at the delicate insulator-metal-vacuum …

Augmenting And Structuring User Queries To Support Efficient Free-Form Code Search, Raphael Sirres, Tegawendé F. Bissyande, Dongsun Kim, David Lo, Jacques Klein, Kisub Kim, Yves Le Traon

Research Collection School Of Computing and Information Systems

Source code terms such as method names and variable types are often different from conceptual words mentioned in a search query. This vocabulary mismatch problem can make code search inefficient. In this paper, we present COde voCABUlary (CoCaBu), an approach to resolving the vocabulary mismatch problem when dealing with free-form code search queries. Our approach leverages common developer questions and the associated expert answers to augment user queries with the relevant, but missing, structural code entities in order to improve the performance of matching relevant code examples within large code repositories. To instantiate this approach, we build GitSearch, a code …

Use Of Nanoclays As Alternatives Of Polymers Toward Improving Performance Of Asphalt Binders, Zahid Hossain, Ashraf Elsayed

Publications

The main goal of this study is to assess the feasibility of the use of nanoclay as an alternative to commonly used polymers such as styrene-butadiene-styrene (SBS), which are used to modify the performance grade (PG) of asphalt binders. Three types of nanoclay and two types of neat binders were selected for laboratory investigation. Different amounts (1, 2, and 3%) of nanoclays were used. A blending protocol has been developed to mix the nanoclay with the asphalt binder. Rotational Viscosity (RV), Dynamic Shear Rheometer (DSR), Optical Contact Analyzer (OCA) and Atomic Force Microscope (AFM) were conducted to evaluate the properties …