Engineering Commons^™

Vortex Motions Around A Vertically Vibrating Cylinder In Oscillatory Flows, Symphony Chakraborty, Tzu-Wen Lin, Ming-Jyh Chern

Journal of Marine Science and Technology–Taiwan

Numerical simulations of the vortex-induced vibration (VIV) on a circular cylinder in an oscillatory flow were conducted using the direct-forcing immersed boundary (DFIB) method. VIV of structures is a practical engineering problem. Many engineers have devoted themselves to research on the prevention of VIV, which can cause severe damage to offshore construction equipment and structures. Fluctuating hydrodynamic force induces vibration of structures because of the vortex around the structure. This vibration causes structural failure due to the lock-in phenomenon. A phenomenon termed “springing” (a secondorder wave effect caused by superposition of the incident waves and the reflected waves or other …

Hydrodynamic Analysis Of Underwater Glider With Diamond Wing In Unsteady And Nonuniform Flow Field, Chen-Wei Chen, Zhuo Feng, Xu Liang

Journal of Marine Science and Technology–Taiwan

In this study, the hydrodynamic performance of a proposed underwater glider (UG) that utilizes a diamond wing was analyzed and its gliding ability in undersea environments with both steady and uniform and unsteady and nonuniform oceanic currents optimized. The flow field around the UG was analyzed using the software package RANS CFD. Under conditions where the current varied linearly both with water depth and time, the UG exhibited harmonically heaving and pitching motions, with a constant acceleration incident flow. The dynamic lifting and drag forces acting on the diamond wing and the dynamic heaving force and pitching moment acting at …

Multifunctional Nanocomposites Based On Bacterial Cellulose, Qisheng Jiang

McKelvey School of Engineering Graduate Student Theses & Dissertations

Cellulose is biodegradable, renewable, and abundant in nature thus cellulose (or paper)-based products can be inexpensively produced and recycled. Among cellulosic materials, bacterial nanocellulose (BNC) draws a special research attention due to the inherent three-dimensional nanofibrous structure, excellent mechanical flexibility, high purity and well-defined surface chemistry, and cost-efficient, scalable and environment-friendly synthesis. BNC can be biosynthesized by Gluconacetobacter xylinus, which is the most characterized BNC producer among various microorganisms. BNC is composed of highly pure cellulose nanofibrils, produced from well-defined dextrose through biochemical steps and subsequent self-assembling of the secreted cellulose fibrils which has the dimension ranges from 25 to …

Kcnq1/Kcne1 Interaction In The Cardiac Iks Channel And Its Physiological Consequences, Jiajing Xu

McKelvey School of Engineering Graduate Student Theses & Dissertations

Dynamic conformational changes of ion channel proteins during activation gating determine their function as carriers of current. The relationship between these molecular movements and channel function over the physiological timescale of the action potential (AP) has not been fully established due to limitations of existing techniques. We constructed a library of possible cardiac IKs protein conformations and applied a combination of protein segmentation and energy linearization to study this relationship computationally. Simulations reproduced the effects of the beta-subunit (KCNE1) on the alpha-subunit (KCNQ1) dynamics and function, observed in experiments. Mechanistically, KCNE1 increased the probability of “visiting” conducting pore conformations on …

Molecular Basis Of Class Ib Drug Interactions With The Nav Channel Macromolecular Complex: A Route To Personalized Medicine For Cardiac Arrhythmia, Wandi Zhu

McKelvey School of Engineering Graduate Student Theses & Dissertations

The heart rhythm is precisely controlled by the electrical impulse that propagate in the cardiac tissue. In single cardiomyocytes, the electrical activity generated by action potentials (AP). Cardiac NaV channels (NaV1.5) carry a large influx of Na+ that mediates the initiation and propagation of the AP in both atria and ventricles. Disruption of NaV1.5 function by genetic variants or external factors can result in deadly arrhythmias, such as long QT syndrome and Brugada syndrome. Thus, NaV channels are import therapeutic targets. The class I antiarrhythmics are the modulators of the NaV channels. Although they have been used clinically for over …

Mechanisms Of Calcium Phosphate Mineralization On Biological Interfaces And Their Engineering Applications, Doyoon Kim

McKelvey School of Engineering Graduate Student Theses & Dissertations

All living organisms utilize phosphorus (P) as an essential component of their cell membranes, DNA and RNA, and adenosine triphosphate. Bones, in addition to bearing loads, play an important role in balancing P levels in our bodies. In bones, a network of collagen templates and calcium phosphate (CaP) nanocrystals builds hierarchical levels, from nano- to macroscale. Within this architecture, the thermodynamic properties of CaP minerals are influential. Despite the importance of nucleation, growth, and crystallization in collagen structures for tissue development, little kinetic study of these processes has been conducted due to the limited in situ techniques for monitoring these …

Effects Of Secondary Stall And Unsteady Free-Stream On Blade Drag And Pitching Moments, Michael Malick

McKelvey School of Engineering Graduate Student Theses & Dissertations

Dynamic stall is a complex aerodynamic phenomenon occurring in helicopter rotors, limiting the flight envelope and causing control linkage damage and instabilities. The Peters-Modarres semi-empirical dynamic stall model is extended to simulate pitching moment and drag in unsteady freestream and yawed flow, including the effects of secondary stall. The aerodynamics are implemented as a state-space model, suitable for time-marching or aeroelastic analyses. With small modifications to the original stall model, secondary stall effects and unsteady freestream can be simulated without adding additional states. An optimization routine determines sets of parameters that minimize the error between the modeled solution and experimental …

Information-Based Analysis And Control Of Recurrent Linear Networks And Recurrent Networks With Sigmoidal Nonlinearities, Deslin Menolascino

McKelvey School of Engineering Graduate Student Theses & Dissertations

Linear dynamical models have served as an analytically tractable approximation for a variety of natural and engineered systems. Recently, such models have been used to describe high-level diffusive interactions in the activation of complex networks, including those in the brain. In this regard, classical tools from control theory, including controllability analysis, have been used to assay the extent to which such networks might respond to their afferent inputs. However, for natural systems such as brain networks, it is not clear whether advantageous control properties necessarily correspond to useful functionality. That is, are systems that are highly controllable (according to certain …

Fast Forward-Backward Channel Estimation For Mimo Stbc-Ofdm Systems, Lena Chang

Journal of Marine Science and Technology–Taiwan

In the study, we develop a fast forward-backward estimation (FFBE) method for multiple input multiple output (MIMO) space time block code (STBC) orthogonal frequency division multiplexing (OFDM) systems. We examined the matrix structure of the forward-backward (FB) correlation matrix and observed this matrix possessing permutation invariant (PI) property. We also investigated the eigen-property of a matrix with PI property and proved its eigenvectors possessing symmetric property, which can be calculated from two half dimensionality submatrices. Based on these analyses, we propose a fast eigen-decomposition algorithm to reduce the computations required in the eigendecomposition of FB correlation matrix. Then, the symmetric …

A Novel Splitting Beam Laser Extensometer Technique For Kolsky Tension Bar Systems, Colin Loeffler

Mechanical Engineering Research Theses and Dissertations

The Kolsky (Split Hopkinson) Bar has become a well-known and established experimental technique for characterizing the mechanical behavior of materials subjected to dynamic loading conditions. Kolsky bar based experimental techniques facilitate the application of controlled and repeatable dynamic loading conditions to a specimen as well as the high resolution measurement of the resulting mechanical response. In recent decades the technique has been refined and adapted to provide more complex dynamic stress-states beyond uniaxial compression. However, the increasing complexity of the experimental apparatus introduces uncertainty to the traditional specimen deformation measurement techniques.

In this thesis, a direct non-contact optical measurement technique …

Spatial Exploration Of Trace Metals In Near-Surface Water And Soil In The Bolivian Altiplano, Lizzie Wilson

Civil and Environmental Engineering Theses and Dissertations

We analyzed soil and groundwater samples from the Bolivian Altiplano for trace metal concentrations, correlations and partitioning trends. Total digestion, sequential extraction and loss on ignition experiments were performed on soil samples. We ran aqueous samples on an ICP-MS. Results were analyzed to identify trace metal concentrations and find any significant correlations. We generated interpolated maps in ArcGIS to spatially analyze results. Results for elevated concentrations of interest were divided into sub-groups of organophilic metals, oxoanions and divalent metals and include vanadium, arsenic, selenium, zinc, nickel, lead, cobalt, uranium, copper and manganese. These elements are likely naturally sourced. We found …

Non-Classical Plate Models Incorporating Microstructure And Surface Energy Effects: Their Variational Formulations And Applications, Gongye Zhang

Mechanical Engineering Research Theses and Dissertations

In this dissertation research, new non-classical models for Kirchhoff and Mindlin plates are developed and applied to study band gaps for flexural wave propagation in composite plate structures.

In Chapter 2, a new non-classical model for a Kirchhoff plate resting on an elastic foundation is developed using a modified couple stress theory, a surface elasticity theory and a two-parameter elastic foundation model. A variational formulation based on Hamilton’s principle is employed, which leads to the simultaneous determination of the equations of motion and the complete boundary conditions and provides a unified treatment of the microstructure, surface energy and foundation effects. …

Optical Micro-Seismometer Based On Evanescent Field Perturbation Of Whispering Gallery Modes, Jaime Da Silva

Mechanical Engineering Research Theses and Dissertations

This thesis proposes a light-weight, compact, and accurate optical micro-seismometer that could be used in many applications, such as planetary exploration. The sensor proposed here is based on the principle of whispering gallery optical mode (WGM) resonance shifts of a dielectric micro-resonator due to disturbances of its evanescent field. The micro-seismometer could be used in place of the traditional bulky seismometers. The design of a waveguide-resonator and mechanical structure to disturb the evanescent field are presented. A proof-of-concept a seismometer model that uses a 5µm ring resonator is numerically tested with actual seismic data. The results show that a WGM-based …

Leveraging Grammars For Openmp Development In Supercomputing Environments, Samuel Hunter

Computer Science and Engineering Theses and Dissertations

This thesis proposes a solution to streamline the process of using supercomputing re- sources on Southern Methodist University’s ManeFrame II supercomputer. A large segment of the research community that uses ManeFrame II belong outside of the computer science department and the Lyle School of Engineering. While users know how to apply compu- tation to their field, their knowledge does not necessarily extend to the suite of tools and operating system that are required to use ManeFrame II. To solve this, the thesis proposes an interface for those who have little knowledge of Linux and SLURM to be able to use …

Decoding Complexity In Metabolic Networks Using Integrated Mechanistic And Machine Learning Approaches, Tolutola Timothy Oyetunde

McKelvey School of Engineering Graduate Student Theses & Dissertations

How can we get living cells to do what we want? What do they actually ‘want’? What ‘rules’ do they observe? How can we better understand and manipulate them? Answers to fundamental research questions like these are critical to overcoming bottlenecks in metabolic engineering and optimizing heterologous pathways for synthetic biology applications. Unfortunately, biological systems are too complex to be completely described by physicochemical modeling alone.

In this research, I developed and applied integrated mechanistic and data-driven frameworks to help uncover the mysteries of cellular regulation and control. These tools provide a computational framework for seeking answers to pertinent biological …

Investigating Cyanobacteria Metabolism And Channeling-Based Regulations Via Isotopic Nonstationary Labeling And Metabolomic Analyses, Mary Helen Abernathy

McKelvey School of Engineering Graduate Student Theses & Dissertations

Cyanobacteria have the potential to be low-cost and sustainable cell factories for bio-products; however, many challenges face cyanobacteria as biorefineries. This dissertation seeks to advance non-model photosynthetic organisms for biotechnology applications by characterizing central carbon metabolism and its regulations. Cyanobacteria phenotypes for bio-production are examined and their intracellular metabolism is quantified. Using isotopic labeling experiments, phenotypic relationships between biomass composition, central carbon fluxes, and metabolite pool sizes are investigated. Metabolic analyses of cyanobacteria led to new investigations of flux regulation mechanisms via protein spatial organizations or metabolite channeling. Metabolite channeling is further explored as a hypothesis to explain enigmatic labeling …

Graphene Oxides In Water: Characterization, Reactivity, And Application, Siyuan An

McKelvey School of Engineering Graduate Student Theses & Dissertations

Recently discovered, graphene and graphene oxide materials have drawn considerable research attention due to outstanding and novel properties, which underpin wide material potential for a number of advanced applications including supercapacitors, solar cells, sensors, catalysts, semiconductors, sorbents, and membranes, among others. Graphene oxides (GO), which are considered as a family of oxidized graphene materials (derivatives), is a key precursor to the synthesis of free-standing graphene via oxidation-exfoliation-reduction pathways. GO properties depend on the synthesis routes/conditions (i.e. derivatization), including partially maintaining graphene (i.e. sp2) properties. Further, oxygen-containing functionalities (epoxy, hydroxyl, carbonyl, and carboxyl groups) render GO hydrophilic – and correspondingly stability …

Accurate Vehicle Detection Using Multi-Camera Data Fusion And Machine Learning, Hao Wu

Electrical Engineering Theses and Dissertations

Computer-vision methods have recently been extensively used in intelligent transportation systems for vehicle detection. However, the detection of severely occluded or partially observed vehicles due to the limited camera fields of view remains a significant challenge. This paper presents a multi-camera vehicle detection system that significantly improves the detection performance under occlusion conditions. The key elements of the proposed method include a novel multi-view region proposal network that localizes the candidate vehicles on the ground plane. We also infer the vehicle occupancies by leveraging multi-view cross-camera context. Experiments are conducted on a dataset captured from a roadway in Richardson, TX, …

Parametric Design And Optimization Of A Pivoting S-Type Rudder For Containerships, Chen-Wei Chen, Tsung-Yueh Lin, Bo-Yen Chen, Jen-Shiang Kouh

Journal of Marine Science and Technology–Taiwan

This study proposes an energy-saving S-type rudder design to deal with the inhomogeneous inflow from a rotating propeller behind a containership. The S-type rudder was modelled parametrically using four-digit NACA foils as section profiles together with Non-uniform rational B-splines (NURBS) surface formulations. A three-stage optimization process is proposed to reduce the number of design iterations necessary to achieve an optimal design. The propulsion simulations were done via CFD software, which solves the hydrodynamics of viscous flow, as governed by the Reynold-averaged Navier-Stokes (RANS) equations. Validations were performed with experimental model tests, including hull resistance, propeller open-water performance, and propulsion in …

Collision Avoidance Path Planning For Ships By Particle Swarm Optimization, Yu-Tao Kang, Wei-Jiong Chen, Da-Qi Zhu, Jin-Hui Wang, Qi-Miao Xie

Journal of Marine Science and Technology–Taiwan

Ship collision avoidance is a key consideration in maritime systems. Collision avoidance maneuvers depend on navigators’ experience and skill levels. Because both maritime traffic densities and average ship speeds are increasing, the times available for decision-making are decreasing, which elevates the risk of human errors in the collision avoidance process. To reduce the effect of human factors and efficiently prevent collisions between ships navigating in open water with effective visibility, a particle swarm optimization (PSO) algorithm can be used to plan ship paths. An improved ship domain dynamic model can assess collision risks in close-range encounters. Several marine traffic scenarios …

Basis Vector Model Method For Proton Stopping Power Estimation Using Dual-Energy Computed Tomography, Shuangyue Zhang

McKelvey School of Engineering Graduate Student Theses & Dissertations

Accurate estimation of the proton stopping power ratio (SPR) is important for treatment planning and dose prediction for proton beam therapy. The state-of-the-art clinical practice for estimating patient-specific SPR distributions is the stoichiometric calibration method using single-energy computed tomography (SECT) images, which in principle may introduce large intrinsic uncertainties into estimation results. One major factor that limits the performance of SECT-based methods is the Hounsfield unit (HU) degeneracy in the presence of tissue composition variations. Dual-energy computed tomography (DECT) has shown the potential of reducing uncertainties in proton SPR prediction via scanning the patient with two different source energy spectra. …

Elevated Temperature Progressive Damage And Failure Of Duplex Stainless Steel, Darren P. Luke

Civil Engineering ETDs

Ductile failure of metals has been the focus of research efforts within academia and industry for many years since it is tremendously important for understanding the failure of structures under extreme loading conditions. However, limited research has been dedicated to elevated temperature ductile failure, which is critical for evaluating catastrophic events such as industrial, structural or shipping vessel fires. A detailed investigation was conducted on the structural response of Duplex Stainless Steel at elevated temperatures. The temperature dependence of elastic modulus, yield strength, ultimate strength, and ductility was measured up to 1000°C and a continuum damage plasticity model was developed. …

Chemically Modified Monolayer Surfaces Influence Valvular Interstitial Cell Attachment And Differentiation For Heart Valve Tissue Engineering, Matthew N. Rush

Nanoscience and Microsystems ETDs

As a cell mediated-process, valvular heart disease (VHD) results in significant morbidity and mortality world-wide. In the US alone, valvular heart disease VHD is estimated to affect 2.5% of the population with a disproportionate impact on an increasing elderly populous. It is well understood that the primary driver for valvular calcification is the differentiation of valvular interstitial cells (VICs) into an osteoblastic-like phenotype. However, the factors leading to the onset of osteoblastic-like VICs (obVICs) and resulting calcification are not fully understood and a more complete characterization of VIC differentiation and phenotypic change is required before treatment of valve disease or …

Stability Of A Spinning Triangle Tethered Spacecraft System In A Circular Orbit, Matthew James Heitstuman

Mechanical Engineering ETDs

Equations of motion are derived for a spinning triangle tethered spacecraft system and are used to analyze the stability of such systems. Floquet theory is applied to the linearized, periodic coefficient, equations of motion to analyze spin stability as a function of triangle geometry and the average spin rate of the satellite relative to the angular velocity of the spacecraft orbiting around a central body. The results of the Floquet analysis show that spin stability is achievable for many combinations of spacecraft geometry and spin rate. Spacecraft engineers or operators for a triangle-shaped tethered spacecraft can use this information for …

Effects Of Secondary Stall And Unsteady Free-Stream On Blade Drag And Pitching Moments, Michael Malick

McKelvey School of Engineering Graduate Student Theses & Dissertations

Dynamic stall is a complex aerodynamic phenomenon occurring in helicopter rotors, limiting the flight envelope and causing control linkage damage and instabilities. The Peters-Modarres semi-empirical dynamic stall model is extended to simulate pitching moment and drag in unsteady freestream and yawed flow, including the effects of secondary stall. The aerodynamics are implemented as a state-space model, suitable for time-marching or aeroelastic analyses. With small modifications to the original stall model, secondary stall effects and unsteady freestream can be simulated without adding additional states. An optimization routine determines sets of parameters that minimize the error between the modeled solution and experimental …

Towards Engineering Advanced Nanomaterials: Elucidating Fundamental Particle Behavior In Water And Critical Sorption Dynamics, Changwoo Kim

McKelvey School of Engineering Graduate Student Theses & Dissertations

As advanced nanomaterials, inorganic-organic nano composites have received great interest as potential platform (nano) structures for sensor, catalyst, sorbent, and environmental applications. Here, my Ph.D. research has focused on the design, synthesis, and characterization of advanced water-stable engineered metal-oxide nanoparticles functionalized by organic frames for environmental applications. For the environmental applications, I have evaluated particleoptimized sorption processes for the remediation and separation of arsenic, chromium, and uranium under environmentally relevant conditions. More specifically, I have explored the critical role of organic coating on sorption mechanisms and performances using engineered iron oxide -based, manganese oxide -based, and manganese ferrite -based (core) …

Multifunctional Nanocomposites Based On Bacterial Cellulose, Qisheng Jiang

McKelvey School of Engineering Graduate Student Theses & Dissertations

Cellulose is biodegradable, renewable, and abundant in nature thus cellulose (or paper)-based products can be inexpensively produced and recycled. Among cellulosic materials, bacterial nanocellulose (BNC) draws a special research attention due to the inherent three-dimensional nanofibrous structure, excellent mechanical flexibility, high purity and well-defined surface chemistry, and cost-efficient, scalable and environment-friendly synthesis. BNC can be biosynthesized by Gluconacetobacter xylinus, which is the most characterized BNC producer among various microorganisms. BNC is composed of highly pure cellulose nanofibrils, produced from well-defined dextrose through biochemical steps and subsequent self-assembling of the secreted cellulose fibrils which has the dimension ranges from 25 to …

Brand Loyalty In The Cruise Sector: Age Cohorts, Gender, And Travel Attributes As Key Moderators For Relationship Marketing Theory, Stephen Wen-Hung Wang, Maxwell Kuo-Hsuan Hsu, Angeline Close Scheinbaum, Feng-Ming Tsai

Journal of Marine Science and Technology–Taiwan

Testing established theory in relationship marketing, we examine the impact of customer relationship management on customer satisfaction and brand loyalty in the context of the cruise industry. Individual differences such as age cohort (e.g., millennials, Gen X, baby boomers), gender, and consumers’ desired travel attributes are examined as moderators. Cruise vacation consumers at an international cruise harbor were approached to complete an in-person survey (n = 226). Empirical findings support extant theory in relationship marketing in that consumers’ perception of relationship investment raises satisfaction and, in turn, brand loyalty. Notably, when customer relationship investment is degenerated into a second order …

A Simplified Two-Switching-Based Model-Free Predictive Current Controller For An Interior Permanent Magnet Synchronous Motor Drive System, Cheng-Kai Lin, Jen-Te Yu, Jyun-Ting Wang, Yen-Shin Lai, Hsing-Cheng Yu, Hao-Qun Huang

Journal of Marine Science and Technology–Taiwan

This paper presents a simplified two-switching-based modelfree predictive current control (STSB-MFPCC) method as well as its application to interior permanent magnet synchronous motor (IPMSM) drive systems. Unlike existing model predictive current controller (MPCC) that uses 7 basic voltage vectors, STSB-MFPCC employs 19 synthesized ones, with each of which consisting of two basic voltage vectors. The new method does not require any information about the load parameters, back electromotive force, nor the system model. Compared to modelbased controllers, the proposed one has a distinctive and appealing nature in that it is much less sensitive to system parameter variations. A digital signal …

Cfd Modeling Of Smoke Movement In An Atrium, Robin Wu

UNLV Theses, Dissertations, Professional Papers, and Capstones

The purpose of this paper is to better understand the behavior of smoke movement in an atrium. Thus gives first responders and civilians in and out of building a better understanding

With the advancements of modern technology, computers and softwares make simulation models possible such as fire models to simulate fire and smoke movements. In this paper, a computational fluid dynamic (CFD) software Fire Dynamic Simulator (FDS) is used to conduct a series of atrium tests to investigate the effectiveness of smoke exhaust systems. FDS solves the Navier-Stokes equations appropriate for low speed flows (Ma < 0.3) with an emphasis on smoke, heat transport and CO2 concentrations from fires. The default turbulence model used in FDS simulation is the Large Eddy Simulation (LES), which is the solution of Navier-Stokes equations at low speed.

The compartment tested was 9 …