Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

2016

Discipline
Institution
Keyword
Publication
Publication Type
File Type

Articles 8611 - 8640 of 9604

Full-Text Articles in Engineering

A Comparative Study On Machining Capabilities Of Wet And Dry Nanoscale Electro-Machining, Muhammad P. Jahan, Kamlakar P. Rajurkar, Ajay P. Malshe Jan 2016

A Comparative Study On Machining Capabilities Of Wet And Dry Nanoscale Electro-Machining, Muhammad P. Jahan, Kamlakar P. Rajurkar, Ajay P. Malshe

Department of Mechanical and Materials Engineering: Faculty Publications

Presently, the nano scale electro-machining (nano-EM) process has been demonstrated in both the liquid and air dielectric mediums, which are known as wet and dry nano-EM respectively. In the current study, two important aspects of the nano-EM have been investigated: the minimum possible feature dimension and mass fabrication capability of nano-EM. Firstly, the investigation has been done on the capability of machining graphene at atomic scale with focus on obtaining smallest possible nano-feature using the wet nano-EM. Secondly, the ability of the nano-EM process for the fabrication of arrays of nano-holes has been investigated using dry nano-EM. It was found …

Go to article

Bioink Properties Before, During And After 3d Bioprinting, Katja Holzl, Shengmao Lin, Liesbeth Tytgat, Sandra Van Vlierberghe, Linxia Gu, Aleksandr Ovsianikov Jan 2016

Bioink Properties Before, During And After 3d Bioprinting, Katja Holzl, Shengmao Lin, Liesbeth Tytgat, Sandra Van Vlierberghe, Linxia Gu, Aleksandr Ovsianikov

Department of Mechanical and Materials Engineering: Faculty Publications

Bioprinting is a process based on additive manufacturing from materials containing living cells. These materials, often referred to as bioink, are based on cytocompatible hydrogel precursor formulations, which gel in a manner compatible with different bioprinting approaches. The bioink properties before, during and after gelation are essential for its printability, comprising such features as achievable structural resolution, shape fidelity and cell survival. However, it is the final properties of the matured bioprinted tissue construct that are crucial for the end application. During tissue formation these properties are influenced by the amount of cells present in the construct, their proliferation, migration …

Go to article

Development Of A Synthetic Gene Network To Modulate Gene Expression By Mechanical Forces, Zoltan Kis, Tania Rodin, Asma Zafar, Zhangxing Lai, Grace Freke, Oliver Fleck, Armando Del Rio Hernandez, Leila Towhidi, Ryan M. Pedrigi, Takayuki Homma, Rob Krams Jan 2016

Development Of A Synthetic Gene Network To Modulate Gene Expression By Mechanical Forces, Zoltan Kis, Tania Rodin, Asma Zafar, Zhangxing Lai, Grace Freke, Oliver Fleck, Armando Del Rio Hernandez, Leila Towhidi, Ryan M. Pedrigi, Takayuki Homma, Rob Krams

Department of Mechanical and Materials Engineering: Faculty Publications

The majority of (mammalian) cells in our body are sensitive to mechanical forces, but little work has been done to develop assays to monitor mechanosensor activity. Furthermore, it is currently impossible to use mechanosensor activity to drive gene expression. To address these needs, we developed the first mammalian mechanosensitive synthetic gene network to monitor endothelial cell shear stress levels and directly modulate expression of an atheroprotective transcription factor by shear stress. The technique is highly modular, easily scalable and allows graded control of gene expression by mechanical stimuli in hard-to-transfect mammalian cells. We call this new approach mechanosyngenetics. To insert …

Go to article

Portable Camera Aided Simulator (Portcas) For Minimally Invasive Surgical Training, Ka-Chun Sui, Carl Nelson, Mohsen Zahiri, Dmitry Oleynikov Jan 2016

Portable Camera Aided Simulator (Portcas) For Minimally Invasive Surgical Training, Ka-Chun Sui, Carl Nelson, Mohsen Zahiri, Dmitry Oleynikov

Department of Mechanical and Materials Engineering: Faculty Publications

The present disclosure is directed to a system and method for surgical training with low cost, reusable materials and a highly customizable virtual environment for skill-building. According to various embodiments, a surgical training tool is usable in conjunction with a support structure configured to at least partially constrain the tool movement. Meanwhile, the tool is tracked in real-time with off-tool detectors to generate a tool path driving a virtual rendering of the surgical training tool in an operative environment. The virtual rendering may be visually observable via a display device and may include a customizable and/or selectable operative environment with …

Go to article

Early Life History Of Three Pelagic-Spawning Minnows Macrhybopsis Spp. In The Lower Missouri River, T. A. Starks, M. L. Miller, J. M. Long Jan 2016

Early Life History Of Three Pelagic-Spawning Minnows Macrhybopsis Spp. In The Lower Missouri River, T. A. Starks, M. L. Miller, J. M. Long

United States Army Corps of Engineers, Omaha District

Life-history characteristics of age-0 sturgeon chub Macrhybopsis gelida, shoal chub Macrhybopsis hyostoma and sicklefin chub Macrhybopsis meeki were compared using several methods. All Macrhybopsis species consumed mostly midge pupae, but M. meeki had the most general diet (Levins’ index, B=0⋅22) compared with M. hyostoma (B=0⋅02) and M. gelida (B=0⋅09). Morisita’s diet overlap index among species pairs ranged from 0⋅62 to 0⋅97 and was highest between M. hyostoma and M. gelida. Daily ages estimated from lapilli otoliths for each species ranged from 15 to 43 days for M. gelida, 19 to 44 for …

Go to article

Secondary Pool Boiling Effects, C. Kruse, A. Tsubaki, C. A. Zuhlke, T. P. Anderson, Dennis R. Alexander, George Gogos, Sidy Ndao Jan 2016

Secondary Pool Boiling Effects, C. Kruse, A. Tsubaki, C. A. Zuhlke, T. P. Anderson, Dennis R. Alexander, George Gogos, Sidy Ndao

Department of Mechanical and Materials Engineering: Faculty Publications

A pool boiling phenomenon referred to as secondary boiling effects is discussed. Based on the experimental trends, a mechanism is proposed that identifies the parameters that lead to this phenomenon. Secondary boiling effects refer to a distinct decrease in the wall superheat temperature near the critical heat flux due to a significant increase in the heat transfer coefficient. Recent pool boiling heat transfer experiments using femtosecond laser processed Inconel, stainless steel, and copper multiscale surfaces consistently displayed secondary boiling effects, which were found to be a result of both temperature drop along the microstructures and nucleation characteristic length scales. The …

Go to article

Experimental Explanation Of The Formation Mechanism Of Surface Mound-Structures By Femtosecond Laser On Polycrystalline Ni60Nb40, Edwin Peng, A. Tsubaki, Craig A. Zuhlke, Meiyu Wang, Ryan Bell, Michael J. Lucis, Troy P. Anderson, Dennis R. Alexander, George Gogos, Jeffrey E. Shield Jan 2016

Experimental Explanation Of The Formation Mechanism Of Surface Mound-Structures By Femtosecond Laser On Polycrystalline Ni60Nb40, Edwin Peng, A. Tsubaki, Craig A. Zuhlke, Meiyu Wang, Ryan Bell, Michael J. Lucis, Troy P. Anderson, Dennis R. Alexander, George Gogos, Jeffrey E. Shield

Department of Mechanical and Materials Engineering: Faculty Publications

Femtosecond laser surface processing (FLSP) is an emerging technique for creating functionalized surfaces with specialized properties, such as broadband optical absorption or superhydrophobicity/ superhydrophilicity. It has been demonstrated in the past that FLSP can be used to form two distinct classes of mound-like, self-organized micro/nanostructures on the surfaces of various metals. Here, the formation mechanisms of below surface growth (BSG) and above surface growth (ASG) mounds on polycrystalline Ni60Nb40 are studied. Cross-sectional imaging of these mounds by focused ion beam milling and subsequent scanning electron microscopy revealed evidence of the unique formation processes for each class of …

Go to article

Dose Dependence Of Radiation Damage In Nano-Structured Amorphous Sioc/Crystalline Fe Composite, Qing Su, Lloyd Price, Lin Shao, Michael Nastasi Jan 2016

Dose Dependence Of Radiation Damage In Nano-Structured Amorphous Sioc/Crystalline Fe Composite, Qing Su, Lloyd Price, Lin Shao, Michael Nastasi

Department of Mechanical and Materials Engineering: Faculty Publications

Through examination of radiation tolerance properties of amorphous silicon oxycarbide (SiOC) and crystalline Fe composite to averaged damage levels, from approximately 8 to 30 displacements per atom (dpa), we demonstrated that the Fe/SiOC interface and the Fe/amorphous FexSiyOz interface act as efficient defect sinks and promote the recombination of vacancies and interstitials. For thick Fe/SiOC multilayers, a clear Fe/SiOC interface remained and no irradiation-induced mixing was observed even after 32 dpa. For thin Fe/SiOC multilayers, an amorphous FexSiyOz intermixed layer was observed to form at 8 dpa, but no further …

Go to article

Effect Of Ce And Co Addition To Fe/Al2o3 For Catalytic Methane Decomposition, Ahmed S. Al-Fatesh, Ashraf Amin, Ahmed A. Ibrahim, Wasim Ullah Khan, Moustafa A. Soliman, Raja L. Al-Otaibi, Anis H. Fakeeha Jan 2016

Effect Of Ce And Co Addition To Fe/Al2o3 For Catalytic Methane Decomposition, Ahmed S. Al-Fatesh, Ashraf Amin, Ahmed A. Ibrahim, Wasim Ullah Khan, Moustafa A. Soliman, Raja L. Al-Otaibi, Anis H. Fakeeha

Chemical Engineering

Catalytic methane decomposition is studied in a fixed bed reactor. Two sets of bimetallic catalysts are employed, namely: 30%Fe-X%Ce/Al2O3 and 30%Fe-X%Co/Al2O3, and compared with monometallic 30%Fe/Al2O3 catalyst. The effect of promoting Fe with Ce and Co and reduction temperature are investigated. The results reveal that Ce addition has shown a negative impact on H2 yield while a positive effect on H2 yield and catalyst stability are observed with Co addition. In terms of number of moles of produced hydrogen per active sites, Fe/Al2O3 has shown a higher number of moles of hydrogen compared to bimetallic catalysts. The catalyst reduced at …

Go to article

A Scalable Low-Cost Cgmp Process For Clinical Grade Production Of The Hiv Inhibitor 5p12-Rantes In Pichia Pastoris, Fabrice Cerini, Hubert Gaertner, Knut Madden, Ilya Tolstorukov, Scott Brown, Bram Laukens, Nico Callewaert, Jay C. Harner, Anna M. Oommen, John T. Harms, Anthony R. Sump, Robert C. Sealock, Dustin J. Peterson, Scott K. Johnson, Stephan B. Abramson, Michael M. Meagher, Robin Offord, Oliver Hartley Jan 2016

A Scalable Low-Cost Cgmp Process For Clinical Grade Production Of The Hiv Inhibitor 5p12-Rantes In Pichia Pastoris, Fabrice Cerini, Hubert Gaertner, Knut Madden, Ilya Tolstorukov, Scott Brown, Bram Laukens, Nico Callewaert, Jay C. Harner, Anna M. Oommen, John T. Harms, Anthony R. Sump, Robert C. Sealock, Dustin J. Peterson, Scott K. Johnson, Stephan B. Abramson, Michael M. Meagher, Robin Offord, Oliver Hartley

Department of Chemical and Biomolecular Engineering: Faculty Publications

In the continued absence of an effective anti-HIV vaccine, approximately 2 million new HIV infections occur every year, with over 95% of these in developing countries. Calls have been made for the development of anti-HIV drugs that can be formulated for topical use to prevent HIV transmission during sexual intercourse. Because these drugs are principally destined for use in low-resource regions, achieving production costs that are as low as possible is an absolute requirement. 5P12-RANTES, an analog of the human chemokine protein RANTES/CCL5, is a highly potent HIV entry inhibitor which acts by achieving potent blockade of the principal HIV …

Go to article

Retargeting The Clostridium Botulinum C2 Toxin To The Neuronal Cytosol, Benjamin J. Pavlik, Elizabeth J. Hruska, Kevin E. Van Cott, Paul H. Blum Jan 2016

Retargeting The Clostridium Botulinum C2 Toxin To The Neuronal Cytosol, Benjamin J. Pavlik, Elizabeth J. Hruska, Kevin E. Van Cott, Paul H. Blum

Department of Chemical and Biomolecular Engineering: Faculty Publications

Many biological toxins are known to attack specific cell types, delivering their enzymatic payloads to the cytosol. This process can be manipulated by molecular engineering of chimeric toxins. Using toxins with naturally unlinked components as a starting point is advantageous because it allows for the development of payloads separately from the binding/translocation components. Here the Clostridium botulinum C2 binding/translocation domain was retargeted to neural cell populations by deleting its non-specific binding domain and replacing it with a C. botulinum neurotoxin binding domain. This fusion protein was used to deliver fluorescently labeled payloads to Neuro-2a cells. Intracellular delivery was quantified by …

Go to article

Noninvasive Measurement Of Electrical Events Associated With A Single Chlorovirus Infection Of A Microalgal Cell, Seung-Woo Lee, Eun-Hee Lee, Gerhard Thiel, James L. Van Etten, Ravi Saraf Jan 2016

Noninvasive Measurement Of Electrical Events Associated With A Single Chlorovirus Infection Of A Microalgal Cell, Seung-Woo Lee, Eun-Hee Lee, Gerhard Thiel, James L. Van Etten, Ravi Saraf

Department of Chemical and Biomolecular Engineering: Faculty Publications

Chlorovirus Paramecium bursaria chlorella virus 1 (PBCV-1) contains a viral-encoded K+ channel imbedded in its internal membrane, which triggers host plasma membrane depolarization during virus infection. This early stage of infection was monitored at high resolution by recording the cell membrane depolarization of a single Chlorella cell during infection by a single PBCV-1 particle. The measurement was achieved by depositing the cells onto a network of one-dimensional necklaces of Au nanoparticles, which spanned two electrodes 70 μm apart. The nanoparticle necklace array has been shown to behave as a single-electron device at room temperature. The resulting electrochemical field-effect transistor …

Go to article

Increasing Student Attentiveness And Engagement In Growing Mechanized Systems Management Courses, Derek M. Heeren Jan 2016

Increasing Student Attentiveness And Engagement In Growing Mechanized Systems Management Courses, Derek M. Heeren

Department of Agricultural and Biological Systems Engineering: Presentations and White Papers

Background Growing enrollment in undergraduate MSYM courses has carried increased class sizes and then made it more difficult for students to remain attentive and engaged during lecture. In fall 2014, I maintained a dynamic lecturing style in MSYM 354, Soil Conservation and Watershed Management. Readiness tests, an active learning tool, continued to be helpful, but the mode of delivery was still largely a traditional lecture. Team based learning was utilized which divided the class into diverse learning teams for both the lab and the lecture. Students completed readiness tests both individually and in their teams. The objective of this activity …

Go to article

Using Swat To Enhance Watershed-Based Plans To Meet Numeric Water Quality Standards, Aaron R. Mittelstet, Daniel E. Storm, Michael J. White Jan 2016

Using Swat To Enhance Watershed-Based Plans To Meet Numeric Water Quality Standards, Aaron R. Mittelstet, Daniel E. Storm, Michael J. White

Department of Agricultural and Biological Systems Engineering: Faculty Publications

The number of states that have adopted numeric nutrient water-quality standards has increased to 23, up from ten in 1998. One state with both stream and reservoir phosphorus (P) numeric water-quality standards is Oklahoma. There were two primary objectives of this research: (1) determine if Oklahoma was meeting the stream and reservoir numeric water-quality standards in the Illinois River and Eucha–Spavinaw watersheds, respectively and (2) identify various combinations of management practices required to meet the water-quality standards. A Soil and Water Assessment Tool (SWAT) model was developed for each watershed. After runoff and P calibration and validation, each model was …

Go to article

Temporal Dynamics Of Maize Plant Growth, Water Use, And Leaf Water Content Using Automated High Throughput Rgb And Hyperspectral Imaging, Yufeng Ge, Geng Bai, Vincent Stoerger, James C. Schnable Jan 2016

Temporal Dynamics Of Maize Plant Growth, Water Use, And Leaf Water Content Using Automated High Throughput Rgb And Hyperspectral Imaging, Yufeng Ge, Geng Bai, Vincent Stoerger, James C. Schnable

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Automated collection of large scale plant phenotype datasets using high throughput imaging systems has the potential to alleviate current bottlenecks in data-driven plant breeding and crop improvement. In this study, we demonstrate the characterization of temporal dynamics of plant growth and water use, and leaf water content of two maize genotypes under two different water treatments. RGB (Red Green Blue) images are processed to estimate projected plant area, which are correlated with destructively measured plant shoot fresh weight (FW), dry weight (DW) and leaf area. Estimated plant FW and DW, along with pot weights, are used to derive daily plant …

Go to article

Pumpage Reduction By Using Variable Rate Irrigation To Mine Undepleted Soil Water, Tsz Him Lo, Derek M. Heeren, Derrel Martin, Luciano Mateos, Joe D. Luck, Dean E. Eisenhauer Jan 2016

Pumpage Reduction By Using Variable Rate Irrigation To Mine Undepleted Soil Water, Tsz Him Lo, Derek M. Heeren, Derrel Martin, Luciano Mateos, Joe D. Luck, Dean E. Eisenhauer

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Conventional irrigation schedules are typically based on portions of the field where root zones hold the least available soil water. This leaves undepleted available water in areas with larger water holding capacities. The undepleted water could be used through variable-rate irrigation (VRI) management; however, the benefits of VRI without in-field mapping are unexamined. In this research, the field-averaged amount of undepleted available soil water in the root zone was calculated from the NRCS Soil Survey Geographic database for 49,224 center-pivot irrigated fields in Nebraska. Potential reductions in pumpage from mining undepleted available water were then estimated. Results of the analysis …

Go to article

Analytical Solution For Speed To Achieve A Desired Operating Point For A Given Fan Or Pump, Michael F. Kocher, Jeyamkondan Subbiah Jan 2016

Analytical Solution For Speed To Achieve A Desired Operating Point For A Given Fan Or Pump, Michael F. Kocher, Jeyamkondan Subbiah

Department of Agricultural and Biological Systems Engineering: Faculty Publications

The Affinity Laws for fans (and pumps) provide a way of determining new fan or pump speed given fan or pump performance curve data and a desired operating point (combination of flow rate and pressure) that does not fall on the curve. However, the affinity law calculations require using a point on the curve (hereafter referred to as the “basic point”) to determine the new speed. Most references regarding the Affinity Laws do not give a clear description of the method for determining the “basic point”, and improper selection of this point can affect the results considerably. This article describes …

Go to article

In-Field Fuel Use And Load States Of Agricultural Field Machinery, Santosh Pitla, Joe D. Luck, Jared Werner, Nannan Lin, Scott A. Shearer Jan 2016

In-Field Fuel Use And Load States Of Agricultural Field Machinery, Santosh Pitla, Joe D. Luck, Jared Werner, Nannan Lin, Scott A. Shearer

Department of Agricultural and Biological Systems Engineering: Faculty Publications

The ability to define in-field tractor load states offers the potential to better specify and characterize fuel consumption rate for various field operations. For the same field operation, the tractor experiences diverse load demands and corresponding fuel use rates as it maneuvers through straight passes, turns, suspended operation for adjustments, repair and maintenance, and biomass or other material transfer operations. It is challenging to determine the actual fuel rate and load states of agricultural machinery using force prediction models, and hence, some form of in-field data acquisition capability is required. Controller Area Networks (CAN) available on the current model tractors …

Go to article

Inter-Row Robot Navigation Using 1d Ranging Sensors, Tyler A. Troyer, Santosh Pitla, Ethan Nutter Jan 2016

Inter-Row Robot Navigation Using 1d Ranging Sensors, Tyler A. Troyer, Santosh Pitla, Ethan Nutter

Department of Agricultural and Biological Systems Engineering: Faculty Publications

In this paper a fuzzy logic navigation controller for an inter-row agricultural robot is developed and evaluated in laboratory settings. The controller receives input from one-dimensional (1D) ranging sensors on the robotic platform, and operated on ten fuzzy rules for basic row-following behavior. The control system was implemented on basic hardware for proof of concept and operated on a commonly available microcontroller development platform and open source software libraries. The robot platform used for experimentation was a small tracked vehicle with differential steering control. Fuzzy inferencing and defuzzification, step response and cross track error were obtained from the test conducted …

Go to article

Tractor Hydraulic Power Data Acquisition System, J. B.W. Roeber, Santosh Pitla, Michael F. Kocher, Joe D. Luck, Roger M. Hoy Jan 2016

Tractor Hydraulic Power Data Acquisition System, J. B.W. Roeber, Santosh Pitla, Michael F. Kocher, Joe D. Luck, Roger M. Hoy

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Tractor hydraulic power is used on a wide range of agricultural implements; however, the availability of operational hydraulic data at points other than full engine throttle position is limited. Operators could utilize this hydraulic data to maximize field efficiency and minimize machinery costs when determining suitable machinery for field operations. A field usable hydraulic test apparatus capable of measuring tractor hydraulic pressure and flow rate data was developed. The goal of this study was to determine if a hydraulic flow and pressure measurement device could be installed on the rear of a tractor to provide implement hydraulic power consumption at …

Go to article

Quantifying The Fate Of Agricultural Nitrogen In An Unconfined Aquifer: Stream-Based Observations At Three Measurement Scales, Troy E. Gilmore, David P. Genereux, D. Kip Solomon, John E. Solder, Briant A. Kimball, Helena Mitasova, Francois Birgand Jan 2016

Quantifying The Fate Of Agricultural Nitrogen In An Unconfined Aquifer: Stream-Based Observations At Three Measurement Scales, Troy E. Gilmore, David P. Genereux, D. Kip Solomon, John E. Solder, Briant A. Kimball, Helena Mitasova, Francois Birgand

Department of Agricultural and Biological Systems Engineering: Faculty Publications

We compared three stream-based sampling methods to study the fate of nitrate in groundwater in a coastal plain watershed: point measurements beneath the streambed, seepage blankets (novel seepage-meter design), and reach mass-balance. The methods gave similar mean groundwater seepage rates into the stream (0.3–0.6 m/d) during two 3–4 day field campaigns despite an order of magnitude difference in stream discharge between the campaigns. At low flow, estimates of flowweighted mean nitrate concentrations in groundwater discharge ([NO-3 ]FWM) and nitrate flux from groundwater to the stream decreased with increasing degree of channel influence and measurement scale, i.e., …

Go to article

Groundwater Transit Time Distribution And Mean From Streambed Sampling In An Agricultural Coastal Plain Watershed, North Carolina, Usa, Troy E. Gilmore, David P. Genereux, D. Kip Solomon, John E. Solder Jan 2016

Groundwater Transit Time Distribution And Mean From Streambed Sampling In An Agricultural Coastal Plain Watershed, North Carolina, Usa, Troy E. Gilmore, David P. Genereux, D. Kip Solomon, John E. Solder

Department of Agricultural and Biological Systems Engineering: Faculty Publications

We measured groundwater apparent age (s) and seepage rate (v) in a sandy streambed using point-scale sampling and seepage blankets (a novel seepage meter). We found very similar MTT estimates from streambed point sampling in a 58 m reach (29 years) and a 2.5 km reach (31 years). The TTD for groundwater discharging to the stream was best fit by a gamma distribution model and was very similar for streambed point sampling in both reaches. Between adjacent point-scale and seepage blanket samples, water from the seepage blankets was generally younger, largely because blanket samples contained a fraction of ‘‘young’’ stream …

Go to article

Comparing Various Hardware/Software Solutions And Conversion Methods For Controller Area Network (Can) Bus Data Collection, Samuel E. Marx, Joe D. Luck, Santosh Pitla, Roger M. Hoy Jan 2016

Comparing Various Hardware/Software Solutions And Conversion Methods For Controller Area Network (Can) Bus Data Collection, Samuel E. Marx, Joe D. Luck, Santosh Pitla, Roger M. Hoy

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Various hardware and software solutions exist for collecting Controller Area Network (CAN) bus data. Digital data accuracy could vary based upon different data logging methods (e.g., hardware/software timing, processor timing, etc.). CAN bus data were collected from agricultural tractors using multiple data acquisition solutions to quantify differences among collection methods and demonstrate potential data accumulation rates. Two types of data were observed for this study. The first, CAN bus frame data, represents data collected for each line of hex data sent from an ECU. One issue with frame data is the resulting large file sizes, therefore a second logging format …

Go to article

Removal Of Cattle Manure Constituents In Runoff From No-Till Cropland As Affected By Setback Distance, John E. Gilley, Aaron J. Sindelar, Brian L. Woodbury Jan 2016

Removal Of Cattle Manure Constituents In Runoff From No-Till Cropland As Affected By Setback Distance, John E. Gilley, Aaron J. Sindelar, Brian L. Woodbury

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Vegetative filter strips located at the bottom of a hillslope have been shown to substantially reduce nutrients and sediment in runoff. Cropland areas could serve a similar function. However, little scientifically derived information is available to help identify the setback distances required to effectively reduce the transport of contaminants in runoff. The objective of this study was to determine the effects of setback distance and runoff rate on the concentrations and mass transport rates of selected constituents following land application of beef cattle manure to a no-till cropland area. The study site had a residue cover of 8.84 Mg ha-1 …

Go to article

Impact Of Scale/Resolution On Evapotranspiration From Landsat And Modis Images, Vivek Sharma, Ayse Kilic, Suat Irmak Jan 2016

Impact Of Scale/Resolution On Evapotranspiration From Landsat And Modis Images, Vivek Sharma, Ayse Kilic, Suat Irmak

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Understanding the role of landscape heterogeneity and its influence on the scaling behavior of surface fluxes as observed by satellite sensors with different spatial resolutions is a critical need to investigate. In this study, the effects of pixel scales on ETc estimation and other parameters that are used to calculate ETc were investigated over different vegetation surfaces in south central Nebraska, USA. Surface Energy Balance System (SEBS) was used to estimate spatially distributed ETc by combining ground-based meteorological data for Landsat and MODIS imagery. The estimated surface energy fluxes were compared and validated to the measured Bowen Ratio Energy Balance …

Go to article

Removal Of Cattle Manure Constituents In Runoff From No-Till Cropland As Affected By Setback Distance, John E. Gilley, Aaron J. Sindelar, Bryan L. Woodbury Jan 2016

Removal Of Cattle Manure Constituents In Runoff From No-Till Cropland As Affected By Setback Distance, John E. Gilley, Aaron J. Sindelar, Bryan L. Woodbury

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Vegetative filter strips located at the bottom of a hillslope have been shown to substantially reduce nutrients and sediment in runoff. Cropland areas could serve a similar function. However, little scientifically derived information is available to help identify the setback distances required to effectively reduce the transport of contaminants in runoff. The objective of this study was to determine the effects of setback distance and runoff rate on the concentrations and mass transport rates of selected constituents following land application of beef cattle manure to a no-till cropland area. The study site had a residue cover of 8.84 Mg ha …

Go to article

262. Direct Measure Of Cervical Interbody Forces In Vivo: Load Reversal After Plating, Eric H. Ledet, Josh Peterson, Rebecca A. Wachs, Mary Beth M. Grabowsky, Joseph C. Glennon, Darryl J. Dirisio Jan 2016

262. Direct Measure Of Cervical Interbody Forces In Vivo: Load Reversal After Plating, Eric H. Ledet, Josh Peterson, Rebecca A. Wachs, Mary Beth M. Grabowsky, Joseph C. Glennon, Darryl J. Dirisio

Department of Agricultural and Biological Systems Engineering: Faculty Publications

BACKGROUND CONTEXT: Biomechanics play an important role in spine fusion, but the in vivo biomechanics of the cervical spine are not well characterized and the in vivo biomechanics after spinal arthrodesis have never been studied. Load sharing facilitates fusion, but overloading of interbody implants can lead to subsidence and failure. In vitro studies have demonstrated that anterior plating significantly alters mechanical loading in the cervical spine. The instantaneous axis of rotation is shifted anteriorly and loading is reversed relative to an uninstrumented spine; the interbody space is compressed during extension and unloaded during flexion. However, this has never been tested …

Go to article

Moisture Insensitive Prediction Of Soil Properties From Vnir Reflectance Spectra Based On External Parameter Orthogonalization, Nuwan K. Wijewardane, Yufeng Ge, Cristine L.S. Morgan Jan 2016

Moisture Insensitive Prediction Of Soil Properties From Vnir Reflectance Spectra Based On External Parameter Orthogonalization, Nuwan K. Wijewardane, Yufeng Ge, Cristine L.S. Morgan

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Moisture is the single most important factor that affects soil reflectance spectra, particularly for field applications. Interest in using soil VNIR spectral libraries, which are commonly based on dry ground soils, to predict soils in the intact field-moist condition (in situ VNIR) is growing. External parameter orthogonalization (EPO) has been proposed as a useful method that links dry ground VNIR models to field moist scans. The goal of this study is to test EPO on a wider set of soil properties and four different modeling techniques, namely, Partial Least Squares Regression (PLS), Artificial Neural Network (ANN), Random Forest (RF), and …

Go to article

Neural Encoding Of Saltatory Pneumotactile Velocity In Human Glabrous Hand, Hyuntaek Oh, Rebecca Custead, Yingying Wang, Steven M. Barlow Jan 2016

Neural Encoding Of Saltatory Pneumotactile Velocity In Human Glabrous Hand, Hyuntaek Oh, Rebecca Custead, Yingying Wang, Steven M. Barlow

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Neurons in the somatosensory cortex are exquisitely sensitive to mechanical stimulation of the skin surface. The location, velocity, direction, and adaptation of tactile stimuli on the skin's surface are discriminable features of somatosensory processing, however the representation and processing of dynamic tactile arrays in the human somatosensory cortex are poorly understood. The principal aim of this study was to map the relation between dynamic saltatory pneumatic stimuli at discrete traverse velocities on the glabrous hand and the resultant pattern of evoked BOLD response in the human brain. Moreover, we hypothesized that the hand representation in contralateral Brodmann Area (BA) 3b …

Go to article

Analyses, Calibration And Validation Of Evapotranspirationmodels To Predict Grass-Reference Evapotranspiration In Thesenegal River Delta, Koffi Djaman, Hossein Tabari, Alpha B. Balde, Lamine Diop, Koichi Futakuchi, Suat Irmak Jan 2016

Analyses, Calibration And Validation Of Evapotranspirationmodels To Predict Grass-Reference Evapotranspiration In Thesenegal River Delta, Koffi Djaman, Hossein Tabari, Alpha B. Balde, Lamine Diop, Koichi Futakuchi, Suat Irmak

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Study region: Grass-reference evapotranspiration estimation by the Penman-Monteithmethod (PM-ETo) requires a number of climate variables which are not always availableat all weather stations. Different alternative ETo equations have been developed and theirutilization for various local climate conditions requires analyses of their accuracy as com-pared to the standardized Penman-Monteith method. There is a significant lack of data andinformation on this topic in the Senegal River Delta (SRD). Study focus: The objective of this study was to evaluate, calibrate and validate six EToequations ((Trabert, Mahringer, Penman1948, Albrecht, Valiantzas1 and Valiantzas2) forthe SRD. Although all six equations showed good agreement with the PM-ETo …

Go to article

First Prev Next Last