Engineering Commons^™

Anisotropic Electrical Response Of Carbon Fiber Reinforced Composite Materials, Mohammad Faisal Haider

Theses and Dissertations

Composites materials are often subjected to multi-physical conditions in different applications where, in addition to mechanical loads, they also need to sustain other types of loads such as electrical currents. The multi-physical behavior of composites needs to be understood and analyzed to facilitate new multi-functional material design. An essential first step towards this goal is to understand how multi-physics properties depend on local details (e.g. micro-structure). Composite materials have heterogeneous electrical properties (carbon/epoxy) at the local level that can be different at the global level. To conduct the multi-physics study, the electrical signal is employed to the composite sample for …

Biodegradable Hybrid Tissue Engineering Scaffolds For Reconstruction Of Large Bone Defects, Danial Barati

Theses and Dissertations

Complex skeletal injuries and large bone fractures are still a significant clinical problem in US. Approximately 1.5 million Americans (veterans, their families, and civilians) every year suffer from bone loss due to traumatic skeletal injuries, infection, and resection of primary tumors that require extensive grafting to bridge the gap. The US bone graft market is over $2.2 billion a year. Due to insufficient mechanical stability, lack of vascularity, and inadequate resorption of the graft, patients with traumatic large skeletal injuries undergo multiple costly operations followed by extensive recovery steps to maintain proper bone alignment and length. Current strategies for repairing …

Analysis Of Pellet Cladding Interaction And Creep Of U3si2 Fuel For Use In Light Water Reactors, Kathryn E. Metzger

Theses and Dissertations

Following the accident at the Fukushima plant, enhancing the accident tolerance of the light water reactor (LWR) fleet became a topic of serious discussion. Under the direction of congress, the DOE office of Nuclear Energy added accident tolerant fuel development as a primary component to the existing Advanced Fuels Program. The DOE defines accident tolerant fuels as fuels that “in comparison with the standard UO2- Zircaloy system currently used by the nuclear industry, can tolerate loss of active cooling in the reactor core for a considerably longer time period (depending on the LWR system and accident scenario) while maintaining or …

A Hierarchical Framework For Phylogenetic And Ancestral Genome Reconstruction On Whole Genome Data, Lingxi Zhou

Theses and Dissertations

Gene order gets evolved under events such as rearrangements, duplications, and losses, which can change both the order and content along the genome, through the long history of genome evolution. Recently, the accumulation of genomic sequences provides researchers with the chance to handle long-standing problems about the phylogenies, or evolutionary histories, of sets of species, and ancestral genomic content and orders. Over the past few years, such problems have been proven so interesting that a large number of algorithms have been proposed in the attempt to resolve them, following different standards. The work presented in this dissertation focuses on algorithms …

Deformation Of Multifunctional Materials At Various Time And Length Scales: A Dic-Based Study, Behrad Koohbor

Theses and Dissertations

The focus in the present work is to explore and characterize the underlying deformation and failure mechanisms in multifunctional materials including woven composites and polymeric foams, using full-field measurements. Attention has been especially drawn towards the challenges associated with characterizing these materials at extreme length and time scales, and investigating the advantages of full-field measurements to resolve the existing limitations. Accordingly, the current limitations in the study of dynamic deformation response of low-impedance materials are identified. An approach based on the general stress equilibrium is presented and successfully implemented to include the concurrent effects of inertia and material compressibility into …

High Gain Pattern Reconfigurable Antenna Arrays For Portable And Body-Centric Wireless Applications, Nowrin Hasan Chamok

Theses and Dissertations

Wireless devices such as smartphones, tablet computers, smartwatches etc. have become ubiquitous. With that, the demand for high speed data has increased tremendously. Designing antennas for such applications is challenging because of limited availability of space, shadowing or blockage from the human body, and signal loss from multipath fading. Conventional broad, fixed beam low gain antennas result in poor reception, faster battery drainage, and low data rate. Compressed footprint high gain pattern reconfigurable antenna arrays can solve these problems which is the focus of this dissertation. Two innovative high gain pattern reconfiguration techniques, the switched beam parasitic array and the …

Addressing The Impact Of Gavins Point Dam On The Lowermost~1400 Kilometers Of The Missouri River, Gregory Leaphart

Theses and Dissertations

The Missouri River originates in the Rocky Mountains in western Montana and joins the Mississippi River near St. Louis, Missouri. Beginning in the early 1900s, engineering efforts, such as dam construction, channel narrowing, and river alignment, were performed for flood control, navigational purposes, to use of water for agricultural and industrial needs, to produce hydroelectric power and the impounded lakes for recreation. These projects permanently altered the flow and sediment transport regimes in the river and the exchange of sediment with the surrounding floodplain. We focus on the long term effects of dam construction and channel narrowing on approximately the …

Engineering Model Of Iii-Nitride Power Heterostructure Field Effect Transistor On Silicon Substrate, Mohammad Mirwazul Islam

Theses and Dissertations

In modern society, the demand for power consumption is increasing rapidly and the need of energy savings is now an issue of global importance. Highly efficient power converters and power conditioning systems operating with wide range of traditional as well as novel renewable and clean energy sources, are playing crucial role in energy saving. Si converters have already reached their limitation in terms of switching frequency and breakdown voltage/on-resistance ratio. Research is going on all around the world and it is now well accepted that significant improvement in power conversion efficiency and speed can only be achieved using beyond Si …

The Oxidation And Decoration Chemistry Of Platinum And Palladium Nanoparticles On Carbon Supports, Ritubarna Banerjee

Theses and Dissertations

Ultrasmall platinum and palladium nanoparticles supported on carbon are used in a wide variety of industrial catalytic processes including hydrogenation-dehydrogenation reactions, isomerization of hydrocarbons, ammonia and formic acid decomposition, the oxidation of carbon monoxide, alcohols and ammonia, and fuel cells. This dissertation covers three aspects of the chemistry of these ultrasmall, carbon supported nanoparticles.

In the first vein of work, the oft-observed discrepancy in Pd nanoparticle size estimation between chemisorption and other methods such as STEM and XRD is explored. It is demonstrated that lower-than-expected chemisorption uptake can stem from not only residual chloride, but also from the decoration of …

Modeling Embankment Breach Due To Overtopping, Ali Asghari Tabrizi

Theses and Dissertations

Despite numerous embankment failures around the world, in-depth assessments as well as reliable, comprehensive sets of data of such failures are limited. Detailed understanding of the earthen embankment failure process and the dominant parameters affecting the failure are needed to predict and model the breach process precisely. Therefore, a series of laboratory experiments on embankment (i.e., dam and levee) overtopping as well as erodibility measurements using the Submerged Jet test are conducted. Also, to study the influence of different model parameters (e.g., turbulence model, bedload formula), one of the dam embankment experiments is simulated. The main goal of this research …

A Lithium Battery Current Estimation Technique Using An Unknown Input Observer, Daniel Cambron

Theses and Dissertations--Electrical and Computer Engineering

Current consumption measurements are useful in a wide variety of applications, including power monitoring and fault detection within a lithium battery management system (BMS). This measurement is typically taken using either a shunt resistor or a Hall-effect current transducer. Although both methods have achieved accurate current measurements, shunt resistors have inherent power loss and often require isolation circuitry, and Hall-effect sensors are generally expensive. This work explores a novel alternative to sensing battery current by measuring terminal voltages and cell temperatures and using an unknown input observer (UIO) to estimate the battery current. An accurate model of a LiFePO_{4 …}

Modelling Of The Nanowire Cds-Cdte Device Design For Enhanced Quantum Efficiency In Window-Absorber Type Solar Cells, Rasika Ganvir

Theses and Dissertations--Electrical and Computer Engineering

Numerical simulations of current-voltage characteristics of nanowire CdS/CdTe solar cells are performed as a function of temperature using SCAPS-1D. This research compares the experimental current-voltage (I-V) characteristics with the numerical (I-V) simulations obtained from SCAPS-1D at various temperatures. Various device parameters were studied which can affect the efficiency of the nanowire-CdS/CdTe solar cell. It was observed that the present simulated model explains the important effects of these solar cell devices, such as the crossover and the rollover effect. It was shown that the removal of defect in i-SnO2 is responsible for producing the crossover effect. In the past, the rollover …

A Modular Electrical Power System Architecture For Small Spacecraft, Timothy M. Lim

Theses and Dissertations--Electrical and Computer Engineering

Small satellites and CubeSats have established themselves within the aerospace community because of their low cost and high return on investment. Many CubeSats are developed in a short time frame and often leverage commercial off the shelf components for quick turnaround missions. With regard to the Electrical Power System, commercially available products typically use a centralized architecture. However, a centralized architecture is not reusable, since missions that require additional solar arrays or batteries would necessitate a redesign of the power system. With the range of CubeSat sizes and mission goals, it is obvious that a one-size-fits-all solution is not appropriate. …

Analysis Of Vocal Fold Kinematics Using High Speed Video, Harikrishnan Unnikrishnan

Theses and Dissertations--Electrical and Computer Engineering

Vocal folds are the twin in-folding of the mucous membrane stretched horizontally across the larynx. They vibrate modulating the constant air flow initiated from the lungs. The pulsating pressure wave blowing through the glottis is thus the source for voiced speech production. Study of vocal fold dynamics during voicing are critical for the treatment of voice pathologies. Since the vocal folds move at 100 - 350 cycles per second, their visual inspection is currently done by strobosocopy which merges information from multiple cycles to present an apparent motion. High Speed Digital Laryngeal Imaging(HSDLI) with a temporal resolution of up to …

Robust Background Subtraction For Moving Cameras And Their Applications In Ego-Vision Systems, Hasan Sajid

Theses and Dissertations--Electrical and Computer Engineering

Background subtraction is the algorithmic process that segments out the region of interest often known as foreground from the background. Extensive literature and numerous algorithms exist in this domain, but most research have focused on videos captured by static cameras. The proliferation of portable platforms equipped with cameras has resulted in a large amount of video data being generated from moving cameras. This motivates the need for foundational algorithms for foreground/background segmentation in videos from moving cameras. In this dissertation, I propose three new types of background subtraction algorithms for moving cameras based on appearance, motion, and a combination of …

Integrating A Simple Traffic Incident Model For Rapid Evacuation Analysis, Andrew J. Collins, R. Michael Robinson, Peter Foytik, Craig Jordan, Barry C. Ezell

VMASC Publications

Road transportation networks are a segment of society's critical infrastructure particularly susceptible to service disruptions. Traffic incidents disrupt road networks by producing blockages and increasing travel times, creating significant impacts during emergency events such as evacuations. For this reason, it is extremely important to incorporate traffic incidents in evacuation planning models. Emergency managers and decision makers need tools that enable rapid assessment of multiple, varied scenarios. Many evacuation simulations require high-fidelity data input making them impractical for rapid deployment by practitioners. Since there is such variation in evacuation types and the method of disruption, evacuation models do not require the …

Wearable Privacy Protection With Visual Bubble, Shaoqian Wang

Theses and Dissertations--Electrical and Computer Engineering

Wearable cameras are increasingly used in many different applications such as entertainment, security, law enforcement and healthcare. In this thesis, we focus on the application of the police worn body camera and behavioral recording using a wearable camera for one-on-one therapy with a child in a classroom or clinic. To protect the privacy of other individuals in the same environment, we introduce a new visual privacy protection technique called visual bubble. Visual bubble is a virtual zone centered around the camera for observation whereas the rest of the environment and people are obfuscated. In contrast to most existing visual privacy …

Market Based Control Of Pv Inverters In A Distribution System, Kumar Rishikesh

Theses and Dissertations--Electrical and Computer Engineering

A growing energy crisis, a rapid climate change, and a constant depletion of fossil fuel necessitates the role of renewable energy resources like PV (Photovoltaics) and wind energy to form a group of distributed sources of generation. These circumstances promote the use of renewable resources meeting the environmental commitments in terms of checking pollution and toxic footprints. A group of PV and wind energy generation units may work together as micro players to form smart grid systems and participate in an existing distribution system to meet a portion of the daily energy demand. This will help in minimizing the network …

Per-Pixel Calibration For Rgb-Depth Natural 3d Reconstruction On Gpu, Sen Li

Theses and Dissertations--Electrical and Computer Engineering

Ever since the Kinect brought low-cost depth cameras into consumer market, great interest has been invigorated into Red-Green-Blue-Depth (RGBD) sensors. Without calibration, a RGBD camera’s horizontal and vertical field of view (FoV) could help generate 3D reconstruction in camera space naturally on graphics processing unit (GPU), which however is badly deformed by the lens distortions and imperfect depth resolution (depth distortion). The camera’s calibration based on a pinhole-camera model and a high-order distortion removal model requires a lot of calculations in the fragment shader. In order to get rid of both the lens distortion and the depth distortion …

Genetic Algorithms In Stochastic Optimization And Applications In Power Electronics, Mengmei Liu

Theses and Dissertations--Electrical and Computer Engineering

Genetic Algorithms (GAs) are widely used in multiple fields, ranging from mathematics, physics, to engineering fields, computational science, bioinformatics, manufacturing, economics, etc. The stochastic optimization problems are important in power electronics and control systems, and most designs require choosing optimum parameters to ensure maximum control effect or minimum noise impact; however, they are difficult to solve using the exhaustive searching method, especially when the search domain conveys a large area or is infinite. Instead, GAs can be applied to solve those problems. And efficient computing budget allocation technique for allocating the samples in GAs is necessary because the real-life problems …

Mathematical Model For Current Transformer Based On Jiles-Atherton Theory And Saturation Detection Method, Xiang Li

Theses and Dissertations--Electrical and Computer Engineering

Current transformer saturation will cause the secondary current distortion. When saturation occurs, the secondary current will not be linearly proportional to the primary current, which may lead to maloperation of protection devices. This thesis researches and tests two detecting methods: Fast Fourier Transform (FFT) and Wavelet Transform based methods. Comparing these two methods, FFT has a better performance in steady state saturation, and Wavelet Transform can determine singularity to provide the moment of distortion.

The Jiles-Atherton (J-A) theory of ferromagnetic hysteresis is one approach used in electromagnetics transient modeling. With decades of development, the J-A model has evolved into different …

Small Satellite Noncommutative Rotation Sequence Attitude Control Using Piezoelectric Actuators, Joshua L. Evans

Theses and Dissertations--Electrical and Computer Engineering

Attitude control remains one of the top engineering challenges faced by small satellite mission planning and design. Conventional methods for attitude control include propulsion, reaction wheels, magnetic torque coils, and passive stabilization mechanisms, such as permanent magnets that align with planetary magnetic fields. Drawbacks of these conventional attitude control methods for small satellites include size, power consumption, dependence on external magnetic fields, and lack of full control authority. This research investigates an alternative, novel approach to attitude-control method for small satellites, utilizing the noncommutative property of rigid body rotation sequences. Piezoelectric bimorph actuators are used to induce sinusoidal small-amplitude satellite …

Two-Stage Psa System For Co2 Removal And Concentration During Closed-Loop Human Space Exploration Missions, Hanife Erden

Theses and Dissertations

A novel two-stage pressure swing adsorption (PSA) system has been developed to remove metabolic CO2 removal from the spacecraft cabin air of the International Space Station (ISS). This PSA system enriches and recovers the CO2 to make it suitable for use in a Sabatier reactor (CO2 reduction). This two-stage PSA process utilizes Stage 1 to concentrate metabolic CO2 from about 0.2667 vol% to about 40 to 60 vol% and Stage 2 to further enrich the CO2 product from Stage 1 up to > 97 vol% CO2, while recovering at least 95% of it, which corresponds to removing 4.0 kg/day of CO2. …

Surface Modification Techniques For Increased Corrosion Tolerance Of Zirconium Fuel Cladding, James Carr

Theses and Dissertations

Corrosion is a major issue in applications involving materials in normal and severe environments, especially when it involves corrosive fluids, high temperatures, and radiation. Left unaddressed, corrosion can lead to catastrophic failures, resulting in economic and environmental liabilities. In nuclear applications, where metals and alloys, such as steel and zirconium, are extensively em- ployed inside and outside of the nuclear reactor, corrosion accelerated by high temperatures, neu- tron radiation, and corrosive atmospheres, corrosion becomes even more concerning. The objec- tives of this research are to study and develop surface modification techniques to protect zirconium cladding by the incorporation of a …

The Effects Of Micro-Dimple Texture On The Friction And Thermal Behavior Of A Point Contact, Utsav Kamleshbhai Parmar

Browse all Theses and Dissertations

This study investigates the effects of the micro-dimple texture on the friction and surface temperature performances of a ball-on-disk contact, operating under the speed and load ranges that cover typical gearing applications. Circular shaped micro-dimple arrays with different dimple center distances and dimple depths are implemented on the ball surface to quantify the impacts of these two parameters on the friction coefficient and the maximum ball surface temperature. In addition, the contacts of three surface texture combinations, namely micro-dimpled and polished ball surface versus polished disk surface, polished ball surface versus polished disk surface and ground ball surface versus ground …

Nonreciprocal Magnetostatic Surface Wave In Thin Ferromagnetic Film, Kumar Vishal

Browse all Theses and Dissertations

Interest in the nonreciprocal property of waves inside the magnetic material starts with its current advancement in the field of passive devices. In current technology passive devices without magnetic cores are realized on a silicon chip, usually these devices are lossy and bigger in size. Passive devices constructed with magnetic core material such as isolators, circulators, phase shifters, and gyrators; gives us the chance to minimize such losses. Nonreciprocity in magnetic material is due to the anisotropic property of permeability, it is complex in nature and represent in 3×3 matrix form. We can control the wave flow inside the nonreciprocal …

A Theoretical Simulation Of The Settling Of Proppants In A Hydraulic Fracturing Process, Nisreen Alseamr

Theses and Dissertations

Hydraulic fracturing is a process for the extraction of hydrocarbons from underground formations. It involves pumping a specialized fluid into the wellbore under high pressures to form and support fractures in the rock. Fracturing stimulates the well to increase the production of oil and the natural gas which are the pillars of the energy economy. Key to this process is the use of proppants, which are solid materials used to keep the fractures open. Understanding the transport of proppant particles through a fluid is important to improve the efficiency and reduce environmental impact of fracturing. An increase of the settling …

Retail Facility Design Considering Product Exposure, Corinne H. Mowrey

Browse all Theses and Dissertations

Retail store's layout affects a shopper's visual experience and correspondingly the time spent in the store, navigation through the aisles, and allocation of attention and money across departments and categories. We contend that alternate rack layouts allow for more of a rack's facing to appear in the shopper's visual field. In this work we focus on the following two questions: (i) what impact does a given rack layout have on how much of a rack display is exposed to a shopper? (ii) what rack layouts maximize exposure to a shopper? To address the first question, we introduce a set of …

A Fractal-Based Mathematical Model For Cancellous Bone Growth Considering The Hierarchical Nature Of Bone, Stephanie Marie Suhr

Browse all Theses and Dissertations

The hierarchical structure of bone alone is not comprehensive enough to provide morphological explanation of how the size and arrangement of the trabeculae within cancellous bone affect load distribution, particularly concerning deterioration of bone in elderly patients. The collagen network and hydroxyapatite play a large role in defining the shape of trabeculae in cancellous bone despite that the arrangement and size is seemingly random. The growth of plates and rods in cancellous bone is mainly due to loading and stress lines within the bone, but mathematical predictive models can be developed using fractal analysis to show how bone may grow …

Elucidating The Role Of Microstructure, Texture, And Microtexture On The Dwell Fatigue Response Of Ti-6al-4v, Alec Mitchell Blankenship

Browse all Theses and Dissertations

Ambient temperature dwell sensitivity is known to be deleterious to the fatigue response of near-alpha titanium alloys. Dwell fatigue refers to the presence of a sustained hold at peak stress as opposed to the continuous variation of normal cyclic fatigue loading. This reduction in failure life-times from dwell loading is attributed to early crack nucleation and faster crack propagation. The degradation is the result of plastic anisotropy on the microstructural scale along with tendency of titanium alloys to creep at low temperatures at stresses well below the 0.2% offset yield strength. Despite being the most widely used titanium alloy, Ti-6Al-4V …