Engineering Commons^™

Hydroband: The Continuous Hydration Monitoring System, Karina E. Atkinson, Catherine P. Benedict

Williams Honors College, Honors Research Projects

Dehydration is defined as a mild, moderate, or extreme loss of water in the body. It can result in fever, muscle cramps, headaches, dizziness, or heat stroke in athletes. Ways to determine hydration levels include analysis of the urine, blood, or sweat, body weight changes, skin elasticity tests, and increases in core temperature. Patent search, research journals, and outside studies in the health and fitness market showed that a convenient and continuous hydration monitoring system was not available. Changes in core body temperature proved to be the quickest way to measure hydration levels. The HydroBand system is geared towards athletes …

Construction Of Polyurethane Fabric Nanocomposites For Use In Resistance Temperature Detectors-Effect Of Polyurethane Concentration, Multi-Walled Carbon Nanotubes, And Oxidant, Jordan M. Shaffer

Williams Honors College, Honors Research Projects

Current resistance temperature detectors (RTDs) are rigid and create pressure points when used in contact with the human body. The current RTDs can also not be used in confined areas like the inside of a prosthetic. The research done for this paper explores the possibility of creating a soft fabric like RTD that can accurately measure temperature. This RTD could be used in medical devices, be placed in prosthetic legs, and be worn for a long period of time creating no discomfort for the user. Polyurethane scaffolds were created through an electrospinning process and multiwalled carbon nanotubes were adhered to …

Investigation Of Degradation Of Amine Sorbent, Elijah Arendt

Williams Honors College, Honors Research Projects

The purpose of this study is to investigate the performance of amine-grafted sorbents, specifically when they are degraded at 120°C. This study varied the amine source and the amount of it in the sorbent. The additive type and the amount of it was also manipulated. The performance of sorbents is characterized by CO₂ capture capacity, which is the amount (in mmol) of CO₂ captured per gram of sorbent at 40°C. The best performing sorbents are ones that maintain their CO₂ capture capacity after degradation. When the amount of additive was manipulated, the sorbents containing 2% b.w. and …

Diffusive Behavior Of Physically Cross-Linked Hydrogels, Morgan A. Stilke

Williams Honors College, Honors Research Projects

A hydrogel is a water swollen polymeric network that has the potential to transform a variety of biomedical applications because of its biocompatibility and water content. Unfortunately, hydrogels typically have poor mechanical robustness. The majority of the content is water, while the remaining structure consists of a physical network, a covalent network, or a combination of both, yielding strength and toughness. There are several strategies attempted to improve mechanical properties including double network hydrogels comprised of two interpenetrating networks: one being a highly crosslinked sacrificial network and the other being a weakly crosslinked network that maintains reversibility after deformation. However, …

Oxidation Resistance Of Nanocrystalline 316l Stainless Steel Processed By High Pressure Torsion, Kevin J. Meisner

Williams Honors College, Honors Research Projects

High Pressure Torsion (HPT) is a materials processing method used to refine the grain size of metallic materials through the application of simultaneous axial and torsional strain. HPT is reported to result in nanocrystalline structure, which the current scientific literature suggests may improve the high temperature oxidation resistance by enhancing diffusion of solutes, particularly Cr, to the surface to form a protective external oxide scale. If oxidation resistance is improved, this possibly allows the use of 316L in oxidizing environments where more expensive alloys are typically used. However, the influence of grain refinement to nanoscale on various properties have been …

Passivation And Potential Fluctuation Of Az31b Alloy In Alkaline Environments, Ana C. Bacco

Williams Honors College, Honors Research Projects

Magnesium (Mg) alloys are used in many industries because of their distinctive properties, but their high chemical reactivity and poor oxide film protection make them inferior. This project focused on investigating the effects of secondary phases and intermetallic particles (IMPs) on the corrosion behavior of AZ31B Mg alloy. The test solution was chloride free NaOH with varying pH levels between 10-14, as well as testing under deaerated conditions. The open circuit potential (OCP) measurements using AZ31B in static NaOH solutions showed potential fluctuation between approximately -1.6 V_SCE (active state) and -0.4 V_SCE (passive state) during the 24-h immersion. …

An Exploration Of Structural Timber Innovation, Simon Beskitt

Williams Honors College, Honors Research Projects

In many undergraduate programs of study, civil and structural engineering students are exposed to introductory material regarding timber construction. The information received in the undergraduate experience typically consists of a brief summary of the basic mechanical properties of wood but does not significantly cover timber design. Much greater emphasis is placed on design practices involving steel and concrete, likely due to their prominence in contemporary building trends in civil engineering. While it is true that wood is one of the older materials in terms of its utilization in structural and architectural design, it is certainly not an antiquated choice. Wood …

Fatigue Performance Of Glass Fiber/Epoxy Composite At Low Temperature, Prajakta Govande 2817401530, Dominic R. Cross, Kwek Tze Tan

Williams Honors College, Honors Research Projects

Due to technological advancement in the manufacturing methods of composites, these materials find a plethora of applications which include but are not limited to wind energy projects in the form of turbine blades. These blades at times are exposed to temperatures as low as -40ᵒC. Therefore, there is a need to study low-temperature effects on such materials under different loading scenarios. This study investigates the possibility of utilizing MAC/GMC as a simulation tool to match trends of mechanical properties such as fatigue performance and stiffness variation of a given Glass fiber/Epoxy composite at 23ᵒC (room temperature) and -40 ᵒC, under …

Prediction Of Vapor/Liquid Equilibrium Behavior From Quantum Mechanical Data, Marshall J. Gnap

Williams Honors College, Honors Research Projects

MOSCED (Modified Separation of Cohesive Energy Density) is a particularly attractive model for activity coefficients because it offers intuitive insights into how to tune solvent-solute interactions to achieve optimized formulations. Unfortunately, only 133 compounds have been characterized with the MOSCED method. Furthermore, there is no convenient method for extending MOSCED predictions to new compounds. The hypothesis of the present research is that the surface charge density of a molecule, once normalized over the molecule surface area, provided graphically by a σ-profile from density functional theory (DFT) computations, can be used to estimate the parameters used in the MOSCED model. DFT …

Stress Corrosion Cracking Evaluation Of Carbon Steel In Biodiesel And The Effect Of Ultrasonic Nanocrystal Surface Modification (Unsm) On 304 Stainless Steel, Josh Geyer

Williams Honors College, Honors Research Projects

The project that was performed was stress corrosion cracking (SSC) of carbon steel in biodiesel, petroleum diesel and a mixture. The project also included the effect of Ultrasonic Nanocrystal Surface Modification (UNSM) on 304 stainless steel. It included the assembly of a slow strain rate (SSR) machine and carrying out testing using the SSR machine. The assembly of the machine will require purchasing and building a stand to house the electrical equipment which includes the computer, actuator control panel and the actuator power supply. The assembly will also include designing and purchasing the connections to connect the actuator to the …

Galvanic Corrosion On Monel K-500 And 1018 Carbon Steel Couple, John K. Nnyanzi

Williams Honors College, Honors Research Projects

The purpose of this research project was to evaluate galvanic damage on 1018 Carbon Steel coupled to Monel K-500 at varying rotation speeds on a rotating cylinder electrode in an aerated solution of ASTM artificial seawater. The work in this project is and attempt to study corrosion behavior for a Monel fastener coupled to a Carbon Steel plate. Polarization curves of each material at different rotation speeds were created to predict the corrosion behavior for a galvanic couple of Carbon Steel and Monel. The Potentiodynamic sweeps predict an increase in the corrosion current density for the galvanic couple when then …

Motorcycle Helmet Crash Detection/Prevention System, David Witsaman

Williams Honors College, Honors Research Projects

This project proposes a motorcycle safety system that increases safety by actively helping to prevent crashes while also helping in the case that an accident does occur. The system actively helps prevent accidents by keeping the user’s eyes on the road with three additions to the typical helmet. The helmet has a heads-up-display (HUD) containing the speed of the motorcycle and turn-by-turn directions. Instead of tilting their head down the user can see their speed and directions by moving their eyes which will keep the road in their field of view. Blind-spot detection increases the user’s overall awareness of their …

2016 Fsae Electric Vehicle Pedal Assembly Design, Evan Beery

Williams Honors College, Honors Research Projects

The purpose of this project was to design and produce the pedal box assembly for the electric formula SAE racecar team’s 2016 racecar. To complete this project, a working 3D model and corresponding blueprints were created. Materials were selected, machined, and assembled. FEA software was used to verify the design. The final step was manufacturing and assembling all the components together and placing them in the racecar. The precision machining was completed on campus at the University of Akron, and was considered a vital measurable of the project.

This assembly allows for the actuation of two aluminum pedals. One pedal …

Designing A Nano-Drone With Hybrid Structural Energy Storage, Ann Klindworth, Jared Cornett, Kyle Leifheit, Joseph Dejacimo

Williams Honors College, Honors Research Projects

The Advanced Energy and Sensor Lab at the University of Akron has been working to develop a working flow battery that replaces today’s solid batteries. The objective of this senior design project was to replace the conventional lithium-ion battery as the energy storage component in nano-copters with a newly designed hybrid structural battery. In the design, the nano-copter needed to be mechanically supported and store enough energy for flying. In order to accomplish this, the nano-copter weight was reduced so that the flight range could be significantly increased. Therefore, the project was broken into two major parts. The first was …

Biomechanics Of Retinal Venous Pulsations As Indicators Of Intracranial Pressure, Charles F. Babbs

Weldon School of Biomedical Engineering Faculty Working Papers

The origin of retinal venous pulsations remains an open problem in physiology and medicine; so too, their exact relationship to intracranial pressure. This study takes a mathematical modeling approach to explore details of blood flow through the eye to reveal the mechanism of pulsations. The intravaginal, intraneural, and intraocular segments of the retinal arteries and veins are modeled as connected resistive-capacitive segments. The analysis incorporates two critical mechanical properties of these small blood vessels, not heretofore studied, which become significant under conditions of negative transmural pressures: (1) dramatically reduced compliance during flattening and (2) cross-sectional shape change as internal volume …

Rate Of Pedestrian Signal Phase Actuation As A Proxy Measurement Of Pedestrian Demand, Christopher M. Day, Hiromal Premachandra, Darcy M. Bullock

Lyles School of Civil Engineering Faculty Publications

No abstract provided.

Analyzing An Abbreviated Dynamics Concept Inventory And Its Role As An Instrument For Assessing Emergent Learning Pedagogies, Nick Stites, David A. Evenhouse, Mariana Tafur, Charles Morton Krousgrill, Craig Zywicki, Angelika N. Zissimopoulos, David B. Nelson, Jennifer Deboer, Jeffrey F. Rhoads, Edward J. Berger

Freeform Publications

The Dynamics Concept Inventory (DCI) is a validated assessment tool commonly used to evaluate student growth within core, gateway-level mechanics courses. This research explored the evaluative use of this tool within the context of Freeform – an emergent course system that buttresses active class meetings with blended and collaborative virtual learning environments, themselves founded upon extensive multimedia content and interactive forums – at Purdue University. The paper specifically considers a number of related issues including: (i) the thoughtful development (via expert content validation) and statistical reliability of an abbreviated DCI instrument, which is more amenable to in-class implementation than the …

Spatial Variations Of The Methanogenic Communities In The Sediments Of Tropical Mangroves, Hongmei Jing, Shunyan Cheung, Zhi Zhou, Chen Wu, Sanjay Nagarajan, Hongbin Liu

The School of Sustainability Engineering and Environmental Engineering (SEE) Faculty Publications

Methane production by methanogens in mangrove sediments is known to contribute significantly to global warming, but studies on the shift of methanogenic community in response to anthropogenic contaminations were still limited. In this study, the effect of anthropogenic activities in the mangrove sediments along the north and south coastlines of Singapore were investigated by pyrosequencing of the mcrA gene. Our results showed that hydrogenotrophic, acetoclastic and methylotrophic methanogens coexist in the sediments. The predominance of the methylotrophic Methanosarcinales reflects the potential for high methane production as well as the possible availability of low acetate and high methylated C-1 compounds as …

Use Of High Resolution Signal Controller Data To Identify Red Light Running, Steven M. Lavrenz, Christopher M. Day, Jay Grossman, Rick Freije, Darcy M. Bullock

Lyles School of Civil Engineering Faculty Publications

No abstract provided.

Extending Link Pivot Offset Optimization To Arterials With Single Controller Diverging Diamond Interchange, Christopher M. Day, Steven M. Lavrenz, Amanda L. Stevens, R Eric Miller, Darcy M. Bullock

Lyles School of Civil Engineering Faculty Publications

No abstract provided.

Real-Time Probe Data Dashboards For Interstate Performance Monitoring During Winter Weather And Incidents, Margaret Mcnamara, Howell Li, Stephen Remias, Deborah Horton, Ed Cox, Darcy M. Bullock

Lyles School of Civil Engineering Faculty Publications

No abstract provided.

Opportunities For Detector-Free Signal Offset Optimization With Limited Connected Vehicle Market Penetration: A Proof-Of-Concept Study, Christopher M. Day, Darcy M. Bullock

Lyles School of Civil Engineering Faculty Publications

No abstract provided.

Thermodynamic Efficiency Limits Of Classical And Bifacial Multi-Junction Tandem Solar Cells: An Analytical Approach, Muhammad A. Alam, Mohammad Ryyan Khan

Department of Electrical and Computer Engineering Faculty Publications

Bifacial tandem cells promise to reduce three fundamental losses (i.e., above-bandgap, below bandgap, and the uncollected light between panels) inherent in classical single junction photovoltaic (PV) systems. The successive filtering of light through the bandgapcascade and the requirement of current continuity make optimization of tandem cellsdifficult and accessible only to numerical solution through computer modeling. The challenge is even more complicated for bifacial design. In this paper, we use an elegantly simple analytical approach to show that the essential physics of optimization is intuitively obvious, and deeply insightful results can be obtained with a few lines of algebra. This powerful …

A Potential New Technique To Estimate The Origins Of Focal Atrial Tachycardias From 12-Lead Electrocardiograms, Charles F. Babbs

Weldon School of Biomedical Engineering Faculty Publications

Background: This brief report presents a potential new technique for locating the sites of origin of focal atrial tachycardias from standard 12-lead electrocardiograms. Methods: Estimated P wave vector coordinates are derived from leads I, aVF, V1 and V2, and mapped to a three dimensional coordinate system in space. A simple graphical method is used to find the back projection of the P wave vector onto the surface of atrial muscle to estimate the most likely site of origin of the tachycardia. Results: Graphical back projection correctly identified foci of atrial tachycardias in 19 of 19 cases described in the most …

An Adapted Approach To Process Mapping Across Alloy Systems And Additive Manufacturing Processes, Luke Charles Sheridan

Browse all Theses and Dissertations

The continually growing market for metal components fabricated using additive manufacturing (AM) processes has called for a greater understanding of the effects of process variables on the melt pool geometry and microstructure in manufactured components for various alloy systems. Process Mapping is a general approach that traces the influence of process parameters to thermal behavior and feature development during AM processing. Previous work has focused mainly on Ti-6Al-4V (Ti64), but this work uses novel mathematical derivations and adapted process mapping methodologies to construct new geometric, thermal, and microstructural process maps for Ti64 and two nickel superalloy material systems. This work …

Quantifying Amorphous Content Of Commercially Available Silicon Carbide Fibers, Ian Mark Wolford

Browse all Theses and Dissertations

SiC/SiC ceramic matrix composites (CMCs) with potential applications at =2700°F (1482°C) are of significant interest to the Air Force. The high temperature performance of SiC fibers used within these composites is greatly affected by the presence of amorphous SiOC and free carbon in the fibers. Therefore quantification of this non SiC material in commercially available SiC fibers is extremely important. In this work Hi Nicalon, Hi-Nicalon Type-S, Tyranno-SA3, Cef-NITE, and Sylramic SiC fibers were studied. Changes in mass, grain size, and amorphous content were measured as a function of processing temperature and time. The amorphous material in each fiber was …

Mining And Analyzing Subjective Experiences In User Generated Content, Lu Chen

Browse all Theses and Dissertations

Web 2.0 and social media enable people to create, share and discover information instantly anywhere, anytime. A great amount of this information is subjective information -- the information about people's subjective experiences, ranging from feelings of what is happening in our daily lives to opinions on a wide variety of topics. Subjective information is useful to individuals, businesses, and government agencies to support decision making in areas such as product purchase, marketing strategy, and policy making. However, much useful subjective information is buried in ever-growing user generated data on social media platforms, it is still difficult to extract high quality …

1-Ghz Cmos Analog Signal Squaring Circuit, Lizhong He

Browse all Theses and Dissertations

In analog signal processing the squaring circuit represents the core for implementing an analog signal having a value representing the square of the input signal. For example, calculating the square of input signal is necessary in adaptive processing of an input signal based on its instantaneous root mean square value. In this thesis, a new 1-Ghz analog signal squaring circuit (squarer) designed in 180 nanometer CMOS process is presented. It is implemented by CMOS components including current source, current mirror, differential amplifier, low-pass filter, and voltage output buffer. A gain control amplifier and a 10-bit ADC are set up to …

Scaling Detailed High-Resolution Data Split Performance Measures To Statewide System Level Management, Howell Li, Christopher M. Day, James R. Sturdevant, Darcy M. Bullock

Lyles School of Civil Engineering Faculty Publications

No abstract provided.

Below-Grade Structurla Flexibility Study For Seismic-Resistant, Self-Centering, Concentrically-Braced Frames, Derek A.J. Hauff

Williams Honors College, Honors Research Projects

Self-centering, concentrically braced frames (SC-CBFs) are seismic-resistant lateral-load resisting systems for buildings that increase the lateral drift capacity in comparison to conventional CBFs. Two different substructures were examined on a six-story and a ten-story building to see which below grade structure was more efficient and how the flexibility from the addition of a basement compares to previous research of SC-CBFs structures without basements.

The study was completed in phases: modeling of forces in SAP2000, sizing of structural members, coding of structure into the modeling program Open System for Earthquake Engineering Simulation (OpenSees), and comparison of the output data.

Substructure one …