Engineering Commons^™

Field Tests Of Two Prestressed Concrete Girder Bridges For Live Load Distribution And Moment Continuity, Christopher D. Eamon, Alaa Chehab, Gustavo Parra-Montesinos

Civil and Environmental Engineering Faculty Research Publications

Two similar bridges constructed with a live load continuous connection were tested for live load distribution and joint continuity. Girder distribution factors (GDFs) were compared to AASHTO equivalent values. For positive moments on all girders as for negative moments on interior girders, results using AASHTO equivalent GDFs were found to be generally conservative. However, for negative moments on exterior girders, test results exceeded AASHTO values, with 2-lane results significantly so. GDF results were verified with a FEA model, which produced similar behavior to the field tests. With respect to joint continuity, it is estimated that a simple span would produce …

11. Genetics, Northeastern State University

Oklahoma Research Day Abstracts

No abstract provided.

Estimating The Electricity Prices, Generation Costs And Co2 Emissions Of Large Scale Wind Energy Exports From Ireland To Great Britain, Brendan Cleary, Aidan Duffy, Bjarne Bach, Aisma Vitina, Alan O'Connor, Michael Conlon

Articles

The share of wind generation in the Irish and British electricity markets is set to increase by 2020 due to renewable energy (RE) targets. The United Kingdom (UK) and Ireland have set ambitious targets which require 30% and 40% of electricity demand to come from RE, mainly wind, by 2020, respectively. Ireland has sufficient indigenous onshore wind energy resources to exceed the RE target, while the UK faces uncertainty in achieving its target. A possible solution for the UK is to import RE directly from large scale onshore and offshore wind energy projects in Ireland; this possibility has recently been …

In Vitro Formation Of Neuroclusters In Microfluidic Devices And Cell Migration As A Function Of Stromal-Derived Growth Factor 1 Gradients, Sean Mccutcheon, Uchenna Unachukwu, Ankush Thakur, Robert Majeska, Stephen Redenti, Maribel Vazquez

Publications and Research

Central nervous system (CNS) cells cultured in vitro as neuroclusters are useful models of tissue regeneration and disease progression. However, the role of cluster formation and collective migration of these neuroclusters to external stimuli has been largely unstudied in vitro. Here, 3 distinct CNS cell types, medulloblastoma (MB), medulloblastoma-derived glial progenitor cells (MGPC), and retinal progenitor cells (RPC), were examined with respect to cluster formation and migration in response to Stromal-Derived Growth Factor (SDF-1). A microfluidic platform was used to distinguish collective migration of neuroclusters from that of individual cells in response to controlled concentration profiles of SDF-1. Cell …

10. Forensic Science, Northeastern State University

Oklahoma Research Day Abstracts

No abstract provided.

Thinking Like A Pro: How Experts And Novices Solve Problems Differently | College Of Engineering, Usu College Of Engineering

College of Engineering News

Jan. 7, 2016 – Engineering education experts at Utah State University are narrowing in on new insights into why young engineering students drop out of their programs or change majors.

It’s an increasingly important conversation as government and industry leaders push for more college graduates in science, technology, engineering and math, or STEM, fields. And yet nationwide, only about half of all engineering students complete their degrees.

Compact Nonlinear Yagi-Uda Nanoantennas, Xiaoyan Y.Z. Xiong, Li (Lijun) Jun Jiang, Wei E.I. Sha, Yat Hei Lo, Weng Cho Chew

Electrical and Computer Engineering Faculty Research & Creative Works

Nanoantennas have demonstrated unprecedented capabilities for manipulating the intensity and direction of light emission over a broad frequency range. The directional beam steering offered by nanoantennas has important applications in areas including microscopy, spectroscopy, quantum computing, and on-chip optical communication. Although both the physical principles and experimental realizations of directional linear nanoantennas has become increasingly mature, angular control of nonlinear radiation using nanoantennas has not been explored yet. Here we propose a novel concept of nonlinear Yagi-Uda nanoantenna to direct second harmonic radiation from a metallic nanosphere. By carefully tuning the spacing and dimensions of two lossless dielectric elements, which …

Mechanical Self-Assembly Of A Strain-Engineered Flexible Layer: Wrinkling, Rolling, And Twisting, Zi Chen, Gaoshan Huang, Ian Trase, Xiaomin Han, Yongfeng Mei

Dartmouth Scholarship

Self-shaping of curved structures, especially those involving flexible thin layers, is attracting increasing attention because of their broad potential applications in, e.g., nanoelectromechanical andmicroelectromechanical systems, sensors, artificial skins, stretchable electronics, robotics, and drug delivery. Here, we provide an overview of recent experimental, theoretical, and computational studies on the mechanical self-assembly of strain-engineered thin layers, with an emphasis on systems in which the competition between bending and stretching energy gives rise to a variety of deformations, such as wrinkling, rolling, and twisting. We address the principle of mechanical instabilities, which is often manifested in wrinkling or multistability of strain-engineered thin layers. …

Voltammetric Analysis Of Mixtures Of Molten Eutectic Licl-Kcl Containing Lacl3 And Thcl4 For Concentration And Diffusion Coefficient Measurement, Zhong-Hang Wang, Devin Rappleye, Michael F. Simpson

Faculty Publications

Several electrochemical techniques, including cyclic voltammetry (CV), chronopotentiometry-open circuit potential (CP-OCP), chronoamperometry (CA) and normal pulse voltammetry (NPV) were applied to the eutectic LiCl-KCl melt containing LaCl₃ and ThCl₄ at 773K. The dependence of diffusion coefficient of La(III) on concentration of LaCl₃ was investigated by using CV, CP and CA. As the concentration of LaCl3 increases, the D_La(III) value obtained from CV gradually decreases, while the values derived from CA and CP exhibit a dome-shaped variation trend. In the LiCl-KCl-LaCl₃-ThCl₄ system, the diffusion coefficients of La(III) and Th(IV) are both approximately constant …

08. Engineering, Northeastern State University

Oklahoma Research Day Abstracts

No abstract provided.

Deq Partners With Universities To Examine Air Emissions From Starting Vehicles “Cold” | College Of Engineering, Usu College Of Engineering

College of Engineering News

Jan 6, 2016 — SALT LAKE CITY — The Utah Department of Environmental Quality (DEQ) has partnered with WeberState University and Utah State University to examine the impacts vehicle emissions have on air quality on very cold winter days when an inversion is setting in the valley.

Students and investigators from Weber State University’s National Center for Automotive Science & Technology (NCAST) and Utah State University are hoping the findings will help DEQ’s Division of Air Quality develop effective air pollution control strategies.

Grafalgo - A Library Of Graph Algorithms And Supporting Data Structures (Revised), Jonathan Turner

All Computer Science and Engineering Research

This report provides an (updated) overview of Grafalgo, an open-source library of graph algorithms and the data structures used to implement them. The programs in this library were originally written to support a graduate class in advanced data structures and algorithms at Washington University. Because the code's primary purpose was pedagogical, it was written to be as straightforward as possible, while still being highly efficient. Grafalgo is implemented in C++ and incorporates some features of C++11. The library is available on an open-source basis and may be downloaded from https://code.google.com/p/grafalgo/. Source code documentation is at www.arl.wustl.edu/~jst/doc/grafalgo.

Reversible Plastic Events During Oscillatory Deformation Of Amorphous Solids, Nikolai V. Priezjev

Mechanical and Materials Engineering Faculty Publications

The effect of oscillatory shear strain on nonaffine rearrangements of individual particles in a three-dimensional binary glass is investigated using molecular dynamics simulations. The amorphous material is represented by the Kob-Andersen mixture at the temperature well below the glass transition. We find that during periodic shear deformation of the material, some particles undergo reversible nonaffine displacements with amplitudes that are approximately power-law distributed. Our simulations show that particles with large amplitudes of nonaffine displacement exhibit a collective behavior; namely, they tend to aggregate into relatively compact clusters that become comparable with the system size near the yield strain. Along with …

Supernormal Conduction And Suppression Of Spatially Discordant Alternans Of Cardiac Action Potentials, Linyuan Jing, Anuj Agarwal, Abhijit R. Patwardhan

Biomedical Engineering Faculty Publications

Spatially discordant alternans (DA) of action potential durations (APD) is thought to be more pro-arrhythmic than concordant alternans. Super normal conduction (SNC) has been reported to suppress formation of DA. An increase in conduction velocity (CV) as activation rate increases, i.e., a negative CV restitution, is widely considered as hallmark of SNC. Our aim in this study is to show that it is not an increase in CV for faster rates that prevents formation of DA, rather, it is the ratio of the CV for the short relative to the long activation that is critical in DA suppression. To illustrate …

Exploratory Study Of The Adoption And Use Of The Smartphone Technology In Emerging Regions: Case Of Saudi Arabia, Fahad Abdulaziz Aldhaban

Dissertations and Theses

Users' acceptance of a new information technology (IT) is considered to be a key determinant factor of its success. Also, studying users' adoption and use of new IT plays an important role in determining users' needs and reducing business risk, especially in industry segments with rapid changes in IT such as Smartphone technology. Such rapid evolution is influencing consumers' behaviors, their daily lifestyle, the manner of conducting their activities and their ways of consuming and using information.

Smartphone technology holds a promising future with an expected global market that could reach US $258 billion by the end of year 2015 …

Case Study Of Quantifying Energy Loss Through Ceiling-Attic Recessed Lighting Fixtures Through 3d Numerical Simulation, Ri Na, Shengmao Lin, Zhigang Shen, Linxia Gu

Durham School of Architectural Engineering and Construction: Faculty Publications

Air leakage through improperly installed recessed lighting fixtures has been identified as a common issue causing extra energy consumption of residential buildings. However, little quantitative study was found in this area. In this paper, a preliminary evaluation of the magnitude of such energy loss was conducted by numerical simulations using 3 dimensional transient computational fluid dynamics (CFD) model. A typical layout of recessed lighting fixtures was used in this case study with boundary conditions in four different seasons, which were obtained from past measured roof/attic temperature data sets. The results of the numerical simulations indicate that leakage of recessed lighting …

The Effects Of Thermal Procedure On Transformation Temperature, Crystal Structure And Microstructure Of Cu-Al-Co Shape Memory Alloy, Y. Aydoğdu, M. Kök, F. Dağdelen, A. Aydoğdu, Ali S. Turabi, Haluk E. Karaca

Mechanical Engineering Faculty Publications

The purpose of this study is to investigate the effects of different thermal procedures of the Cu-Al-Co shape memory alloy on its crystal structure, transformation temperature and microstructure. The alloys were subjected to a heat treatment and then cooling was applied at four different conditions. After the thermal process, XRD, DSC, optical microscopy and micro-hardness measurements were carried out. The experimental studies showed that crystal structure, microstructure and transformation temperature of Cu-Al-Co alloy were changed from the cooling conditions.

06. Computer Science, Northeastern State University

Oklahoma Research Day Abstracts

No abstract provided.

Design And Development Of The Sunswift Eve Solar Vehicle: World's Fastest Long-Range Electric Car, Sam Paterson, Pujith Vijayaratnam, Charith Perera, Graham Doig

Aerospace Engineering

The Sunswift project of the University of New South Wales, Australia, exists to provide university students with a multi-disciplinary engineering challenge, enhancing the true educational value of their degree with a unique hands-on real-world experience of creating solar–electric hybrid vehicles. The design and development of the low-drag ‘solar supercar’ Sunswift eVe car are described here, detailing the student-led process from initial concept sketches to the completed performance vehicle. eVe was designed to demonstrate the potential of effective solar integration into a practical passenger-carrying vehicle. It is a two-seater vehicle with an on-body solar array area of 4 m² and …

Impact Of Irrigation Method On Water Use Efficiency And Productivity Of Fodder Crops In Nepal, Ajay K. Jha, Razan Malla, Mohan Sharma, Jeeban Panthi, Tarendra Lakhankar, Nir Y. Krakauer, Soni M. Pradhanang, Piyush Dahal, Madan Lall Shrestha

Publications and Research

Improved irrigation use efficiency is an important tool for intensifying and diversifying agriculture in Nepal, resulting in higher economic yield from irrigated farmlands with a minimum input of water. Research was conducted to evaluate the effect of irrigation method (furrow vs. drip) on the productivity of nutritious fodder species during off-monsoon dry periods in different elevation zones of central Nepal. A split-block factorial design was used. The factors considered were treatment location, fodder crop, and irrigation method. Commonly used local agronomical practices were followed in all respects except irrigation method. Results revealed that location effect was significant (p < 0.01) with highest fodder productivity seen for the middle elevation site, Syangja. Species effects were also significant, with teosinte (Euchlaena mexicana) having higher yield than cowpea (Vigna unguiculata). Irrigation method impacted green biomass yield (higher with furrow irrigation) but both methods yielded similar dry biomass, while water use was 73% less under drip irrigation. Our findings indicated that the controlled application of water through drip irrigation is able to produce acceptable yields of nutritionally dense fodder species during dry seasons, leading to more effective utilization and resource conservation of available land, fertilizer and water. Higher productivity of these nutritional fodders resulted in higher milk productivity for livestock smallholders. The ability to grow fodder crops year-round in lowland and hill regions of Nepal with limited water storages using low-cost, water-efficient drip irrigation may greatly increase livestock productivity and, hence, the economic security of smallholder farmers.

Assessment Of Force Coordination And Neuromuscular Quickness In Healthy Adults, Karen L. Haberland

Theses and Dissertations

Throughout daily life, it is necessary to handle and control innumerable objects. To do so, one’s hands must be precisely regulated. To ensure that an object is effectively manipulated, an individual must apply a grip force (GF) perpendicular to the object’s surface to overcome load force (LF), which acts tangential to the surface to counteract the object’s weight and inertia. Previous studies have shown an elaborate coordination between GF and LF in a variety of object manipulation tasks in healthy populations. This kinetic analysis is clinically important because the GF-LF coordination is shown to deteriorate in aging and neurologically impaired …

Auto-Detection Of Anisakid Larvae In Cod Fillets By Uv Fluorescent Imaging With Os-Elm, Wenqiang Cai, Limin Cao, Hong Lin, Jianxin Sui, Rui Nian, Jidong Hu, Amaury Lendasse

Engineering Management and Systems Engineering Faculty Research & Creative Works

In This Paper, One Auto-Detection Scheme of Anisakid Larvae in Cod Fillets is Developed on the Basis of Online Sequential Extreme Learning Machine (OS-ELM) in a Single Hidden Layer Feedforward Neural Networks (SLFN). One Uv Fluorescent Imaging System is First Set Up to Collect and Extract the Typical Image Patches with and Without Anisakid Larvae Inside the Fish Muscles, the Uv Fluorescent Image Patches Are Then Fed into SLFN Sequentially to Learn How to Nondestructively Identify the Parasites in Real-Time, particularly for a Growing Size of the Training Set with New Observations Arrived Again and Again. It Has Been Shown …

1-Bit Compressed Sensing Based Framework For Built-In Resonance Frequency Prediction Using On-Chip Noise Sensors, Tao Wang, Jinglan Liu, Cheng Zhuo, Yiyu Shi

Electrical and Computer Engineering Faculty Research & Creative Works

Significant noise will occur when the load currents of a chip contain frequency components that are close to its resonance frequency, which is mainly decided by power delivery network (PDN) capacitance and package inductance. Yet with technology scaling, the wire parasitic capacitance, which suffers from large process variations, starts to become a dominant contributor in the PDN capacitance, leading to a large resonance frequency variation across dies. It is thus important to know the resonance frequency of individual chips to effectively avoid resonance noise at runtime. Existing methods are mostly based on frequency sweeping, which are too expensive to apply …

System And Method For Identifying Electrical Properties Of Integrate Circuits, Mary Y. Lanzerotti

AFIT Patents

A new method for displaying electrical properties for integrated circuit (IC) layout designs provides for improved human visualization of those properties and comparison of as designed layout design parameters to as specified layout design parameters and to as manufactured layout parameters. The method starts with a circuitry as designed layout in a first digital format, extracts values for electrical properties from that circuitry as designed layout then annotates those values back into the first digital format. The annotated circuitry as designed layout is then converted from the first digital format to a second digital format that can be converted to …

Staves: Speedy Tensor-Aided Volterra-Based Electronic Simulator, Haotian Liu, Xiaoyan Y.Z. Xiong, Kim Batselier, Lijun Jiang, Luca Daniel, Ngai Wong

Electrical and Computer Engineering Faculty Research & Creative Works

Volterra series is a powerful tool for black-box macro-modeling of nonlinear devices. However, the exponential complexity growth in storing and evaluating higher order Volterra kernels has limited so far its employment on complex practical applications. On the other hand, tensors are a higher order generalization of matrices that can naturally and efficiently capture multi-dimensional data. Significant computational savings can often be achieved when the appropriate low-rank tensor decomposition is available. In this paper we exploit a strong link between tensors and frequency-domain Volterra kernels in modeling nonlinear systems. Based on such link we have developed a technique called speedy tensor-aided …

05. Chemistry, Northeastern State University

Oklahoma Research Day Abstracts

No abstract provided.

Interactions Of Shock Tube Exhaust Flows With Laminar And Turbulent Flames, Joel E.C. Chan, Paul M. Giannuzzi, Kaveh R. Kabir, Michael J. Hargather, Graham Doig

Aerospace Engineering

The interactions of flow features emitting from open-ended shock tubes with free-standing propane flames have been investigated using high-speed schlieren imaging and high-frequency pressure measurements, with additional data from validated numerical modeling. Both compressed air-driven interactions with non-pre-mixed laminar diffusion flames (small-scale) and explosively-driven interactions with turbulent non-pre-mixed turbulent flames (large-scale) were tested for various flame locations and shock tube stagnation pressures (and therefore Mach numbers). In the small-scale tests it was observed that the flames were not significantly influenced by the passage of either the initial shock if placed close to the tube exit, or the weaker pressure waves …

A New Type Of Wind Tunnel For The Evaluation Of Curved Motion, James Keogh, Tracie Barber, Sammy Diasinos, Graham Doig

Aerospace Engineering

While aerodynamic analysis of the flow conditions during cornering can be an important design parameter for applications such as automobiles, vessels, and highly maneuverable aircraft, it can be difficult to simulate. This type of motion requires controlled and repeatable flow curvature, relative to the model. A new design to allow experimental testing for this condition has been developed, and by testing in a non-inertial reference frame, flow curvature is achieved in the absence of a static pressure gradient. Initial results have demonstrated the ability of the concept to produce the correct flowfield and the new design offers potential for new …

04. Botany, Northeastern State University

Oklahoma Research Day Abstracts

No abstract provided.

Measuring The Effectiveness Of Software-Based Training To Improve The Spatial Visualization Skills Of Students In Stem Disciplines In Higher Education Institutions, Peter Cole

Dissertations

This research investigates how software can be used to teach spatial skills leading to greater success in Science, Technology, Engineering, and Mathematical (STEM) fields. Existing research indicates that spatial skills can be taught and that good spatial skills are common to people who succeed in STEM fields. In this work, a software-only testing system with a direct targeted, training intervention module was implemented to measure and teach spatial skills using mental rotations, which are believed to be one of the most significant indicators of success in STEM fields. Spatial skills were tested using a standardized and validated test that measures …