Engineering Commons^™

Design Of A 3d-Printed Device For Diffuse Reflectance Spectroscopy Calibration As A Step Towards Clinical Translation, Nontapoth Vongkittiargorn

Biomedical Engineering Undergraduate Honors Theses

The diffusive reflectance and spectroscopic microendoscopy (DRSME) is a multimodal imaging system that harnesses its usefulness from different light sources. One of the modalities, diffuse reflectance spectroscopy (DRS), has been used in our lab to investigate optical properties of epithelial tissues using a broadband white light as the main source. Calibration of DRS is required as it can obtain the maximum intensity and convert it to absolute reflectance. Current manual-adjusted calibration can be lengthy and often lead to inconsistent results. Therefore, a new method of calibration is introduced where additive manufacturing (or 3D printing) technology is fully utilized.

The instrumentation …

Design And Resistance Factor Calibration Of Pipe Piles In California, Yujie Hu

Civil Engineering Theses - Archive

Steel pipe piles, either open ended or close ended, are widely used in the state of California as bridge foundations due to high load bearing capacity, light weight, and outstanding workability. The design methods currently used by Caltrans were developed based on limited field data and are lack of field validations of the recent development of steel pipe piles. In this thesis study, 45 high quality steel pipe pile load tests performed in various soil conditions were collected from Caltrans’ load test data to evaluate available design methods and calibrate the resistance factors of selected design methods. A total of …

Potential Application Of Ultra-High Performance Fiber-Reinforced Concrete With Wet-Mix Shotcrete System In Tunneling, Jean Gamarra

Civil Engineering Theses - Archive

In the tunneling industry, shotcrete has been used for several decades. The use of shotcrete or wet-mix spray-on methods allows the application of this method in complex underground profiles and shapes. The need for time efficient spraying methods and constructability for lining coverage opens the door for technologies like steel and synthetic fiber reinforced shotcrete to achieve a uniform and a good quality product. An important advantage of the application of fiber reinforced concrete in shotcrete systems for tunneling is that almost no steel fixing is required. This leads to several other advantages including safer working conditions during excavation, less …

Usb-Powered Turntable "Turn T", Gerardo Sevilla, James Lougaris

Electrical Engineering

No abstract provided.

A Study On The Synthesis And Properties Of Gold Nanoparticles And Their Applications To Surface Enhanced Raman Spectroscopy, Daniel Robert Soden

Graduate Theses/Dissertations

Surface enhanced Raman substrates represent a critical step in the sensitivity augmentation of Raman spectroscopy, but due to the time and expertise currently required in the synthesis process, they have not been fully realized within an industrial setting. This thesis aims to investigate a new technique in surface enhanced Raman spectroscopy (SERS) substrate fabrication designed to decrease synthesis time and map the most effective growth parameters for a successful Raman intensity boost. Sputter physical vapor deposition was utilized to deposit a gold (Au) layer on an insulating substrate, and annealing treatments were applied to agglomerate the Au atoms into the …

Experimental And Theoretical Analyses Of The Structural, Electronic And Magnetic Properties Of Novel Inverted Core-Shell A-Cr2o3@A-Mxcr2-Xo3-Y (M=Co, Ni, Mn, Fe) Nanoparticles, Mohammad Delower Hossain

Graduate Theses/Dissertations

I used hydrothermal nano-phase epitaxy technique to synthesize well-ordered a-Cr2O3@a-MxCr2-xO3 (M = Co, Ni, Mn, Fe) inverted core-shell nanoparticles (NPs). This resulted in the formation of novel a-MxCr2-xO3 shells having ferromagnetic/ferrimagnetic (FM/FiM) spin ordering and an antiferromagnetic (AFM) a-Cr2O3 core structure. The combined results from Xray diffraction (XRD) and high resolution transmission electron microscoy (HRTEM) provide evidence of the presence of the corundum phase both in the shell and in the core regions. HRTEM results also show a sharp interface exhibiting epitaxial atomic registry of shell atoms over highly ordered core atoms whereas TEM-Energy dispersive spectroscopy analyses show that the …

Rapid, Low-Cost Biosensor For Water-Borne Pathogens In Low-Resource Environments, Kimberly Cribbs

Chemical Engineering Undergraduate Honors Theses

When testing water quality, “microbiological results typically require a minimum of 24 hours to complete” due to reliance on the traditional and inexpensive cultivation method. In 2000, an isothermal DNA amplification method termed loop-mediated isothermal amplification (LAMP) was invented allowing for microbiological assessments to be performed in less than one hour without the need for an expensive thermocycler. In 2013, the World Health Organization reported LAMP as an “attractive diagnostic platform for resource-poor settings: it is fast [15-40 min], isothermal [requiring only a heat block], robust to inhibitors and reaction conditions that usually adversely affect PCR methods, and it generates …

Assessing The Limitations And Capabilities Of Lidar And Landsat 8 To Estimate The Aboveground Vegetation Biomass And Cover In A Rangeland Ecosystem Using A Machine Learning Algorithm, Shital Dhakal

Boise State University Theses and Dissertations

Remote sensing based quantification of semiarid rangeland vegetation provides the large scale observations required for monitoring native plant distribution, estimating fuel loads, modeling climate and hydrological dynamics, and measuring carbon storage. Fine scale 3-dimensional vertical structural information from airborne lidar and improved signal to noise ratio and radiometric resolution of recent satellite imagery provide opportunities for refined measurements of vegetation structure.

In this study, we leverage a large number of time series Landsat 8 vegetation indices and lidar point cloud - based vegetation metrics with ground validation for scaling aboveground shrub and herb biomass and cover from small scale plot …

Removal Of High And Low Levels Of Ammonium From Industrial Wastewaters, Gregory Bock

UNLV Theses, Dissertations, Professional Papers, and Capstones

Over 2×10^11 kilograms of ammonia are produced globally per year by the Haber-Bosch process which combines molecular hydrogen and nitrogen to synthesize ammonia. Most is used for fertilizer and agriculture while the remaining is used for other purposes including industrial processes and explosives. Explosives used in the mining industry are commonly ammonium nitrate (����4����3)-based. Excess ammonia and nitrate which can be dissolve into mine runoff water during blasting. Ammonia in mine and mineral wastewater can range from 20-110 mg/L. Ammonia is also present in several types of industrial wastewater such as caustic soda solutions used in the oil re-refining industry …

A Study On Automated Process For Extracting White Blood Cellular Data From Microscopic Digital Injured Skeletal Muscle Images, Bibek Karki

UNLV Theses, Dissertations, Professional Papers, and Capstones

Skeletal muscle injury is one of the common injuries caused by high-intensity sports activities, military related works, and natural disasters. In order to discover better therapies, it is important to study muscle regeneration process. Muscle regeneration process tracking is the act of monitoring injured tissue section over time, noting white blood cell behavior and cell-fiber relations. A large number of microscopic images are taken for tracking muscle regeneration process over multiple time instances. Currently, manual approach is widely used to analyze a microscopic image of muscle cross section, which is time consuming, tedious and buggy.

Automation of this research methodology …

Effects Of Vertical Ground Motion On Seismic Performance Of Reinforced Concrete Flat-Plate Buildings, Sara Jean George

UNLV Theses, Dissertations, Professional Papers, and Capstones

Reinforced concrete flat plate is a type of structural system widely used for office and residential buildings in many areas including those with high seismic risk. In the regions of high seismicity, moment frames or shear walls are employed to resist lateral loading while the flat-plate system is designed to primarily resist gravity loading. Flat-plate structures must maintain lateral deformation capacity as well as resist gravity loading under seismic loads. The deformation capacity of a slab-column connection is a function of vertical shear transferred from slab to column. The effects of vertical loading become even more exaggerated when the flat-plate …

Mcnp6 Computational-Based Sensitivity Propagation Analysis Of Continuous Neutron Cross-Sections Using The Godiva (Hmf-001) And The Godiver (Hmf-004) Benchmark Criticality Study Cases, Lawrence James Lakeotes

UNLV Theses, Dissertations, Professional Papers, and Capstones

There has been a reduction in funding for theoretical and applied research for improving the nation's database of continuous neutron cross-sections at BNL-NNDC. From 1940 through the late 1980s, research and applied development produced volumes of reliable neutron continuous cross-sections for many isotopes. Currently, the cross-section work has been mainly computational. The focus of this research is mainly centered on the requirements for improving thermal cross-sections to support reactor operations and fuel storage. The research efforts will also helpfully aid in the fast fission spectrum in order to support fast reactor designs for improving safety analysis and feedback coefficients.

This …

Solar Energy Storage In Molten Salt Shell Structures, Nathan David Tyrrell Loyd

UNLV Theses, Dissertations, Professional Papers, and Capstones

Molten salts (MS) in the 580°C range could be used to store excess energy from solar power stations and possibly from nuclear or coal. The energy can be stored up to a week in large containers at elevated temperature to generate eight hours of electricity to be used at night or during peak demand hours. This helps to reduce the fluctuation experienced at thermal solar power stations due to weather conditions. Our research supported by Office of Naval Research (ONR), presents a survey of salts to be used in molten salt technology and the design of large steel and hybrid …

Portable High Throughput Digital Microfluidics And On-Chip Bacteria Cultures, Yiyan Li

UNLV Theses, Dissertations, Professional Papers, and Capstones

An intelligent, portable, and high throughput digital microfluidic (DMF) system is developed. Chapter 1 introduces microfluidics and DMF systems. In Chapter 2, a low-cost and high resolution capacitive-to-digital converter integrated circuit is used for droplet position detection. A field-programmable gate array FPGA is used as the integrated logic hub of the system for highly reliable and efficient control of the circuit. In this chapter a fast-fabricating PCB (printed circuit board) substrate microfluidic system is proposed. Smaller actuation threshold voltages than those previously reported are obtained. Droplets (3 µL) are actuated using 200 V, 500 Hz DC pulses. Droplet positions can …

Neutron-Gamma Discrimination In Elpasolite Scintillator Detector, Brittany Morgan

UNLV Theses, Dissertations, Professional Papers, and Capstones

Existing nuclear stockpiles and weapons-making capabilities imperil the global community. Current nonproliferation efforts involve the research and development of newer, more efficient detection systems that can be deployed for the interdiction and monitoring of special nuclear materials (SNM). Spontaneous and induced fission events in SNM produce neutrons and gamma rays, which can be detected and analyzed, in particular, using scintillator detectors. Various electronic data acquisition systems and data analysis methods have been employed to record and characterize neutron and photon signatures. The goal of this thesis is to develop a new method of discrimination between neutrons and photons in the …

Laboratory Evaluation Of Geogrid-Reinforced Flexible Pavements, Mohammadreza Sharbaf

UNLV Theses, Dissertations, Professional Papers, and Capstones

An experimental laboratory program to assess the effectiveness of biaxial and triaxial geogrid-reinforced flexible pavements to reduce roadway section was carried out. Six laboratory tests were conducted using a steel cylindrical mold with dimensions of 1.8 m (6 ft) in diameter and 2.1 m (7 ft) in height. The studied reinforced and unreinforced (without geogrid) sections consisted of a locally-obtained subgrade with a minimum thickness of 1.5 m (5 ft) and an asphaltic surface course of 7.6 cm (3 in). The base thickness of three tests was 30.5 cm (12 in) while for the other three tests used base thickness …

Vision-Based Intersection Monitoring: Behavior Analysis & Safety Issues, Mohammad Shokrolah Shirazi

UNLV Theses, Dissertations, Professional Papers, and Capstones

The main objective of my dissertation is to provide a vision-based system to automatically understands traffic patterns and analyze intersections. The system leverages the existing traffic cameras to provide safety and behavior analysis of intersection participants including behavior and safety. The first step is to provide a robust detection and tracking system for vehicles and pedestrians of intersection videos. The appearance and motion based detectors are evaluated on test videos and public available datasets are prepared and evaluated. The contextual fusion method is proposed for detecting pedestrians and motion-based technique is proposed for vehicles based on evaluation results. The detections …

Perchlorate Bioremediation: Controlling Media Loss In Ex-Situ Fluidized Bed Reactors And In-Situ Biological Reduction By Slow-Release Electron Donor, Sichu Shrestha

UNLV Theses, Dissertations, Professional Papers, and Capstones

The main concern of perchlorate exposure through drinking water is its effects on the production of thyroid hormone, which is important for human metabolism and child’s brain development. The US Environmental Protection Agency (EPA) has listed perchlorate in the contaminant list as well as in the Unregulated Contaminant Monitoring rule.

The extent of perchlorate contamination can be categorized by the level of contamination into parts per million (ppm) levels, typically in locations where perchlorate was manufactured, and parts per billion (ppb) levels where perchlorate was used for various purposes. Ion-exchange is generally adopted for treating ppb levels of perchlorate while …

Impedance Spectroscopy Studies Of Yttria Stabilized Zirconia Under Extreme Conditions, Quinlan Blaine Smith

UNLV Theses, Dissertations, Professional Papers, and Capstones

Yttria Stabilized Zirconia (YSZ) is of interest for many industries. Varying amounts of Yttria (Y2O3) can be doped into Zirconia (ZrO2) to create materials with specific characteristics. For instance, 3mol% YSZ (3YSZ) is known to be a super hard material and is used as a coating on drill tips and as an abrasive. Eight mol% YSZ (8YSZ) is commonly used as a solid electrolyte in Solid Oxide Fuel Cells because of its good ionic conducting abilities and stability at high temperatures. In this thesis project, a novel experimental setup was created and used to study the ionic conductivity of (3 …

Minimizing Ethanol Concentration In Organosolv Pretreatment For The Saccharification Of Loblolly Pine, Nelson B. Heringer

Biological and Agricultural Engineering Undergraduate Honors Theses

Organic solvent pretreatment, commonly known as organosolv, is a method used to prepare biomass for enzymatic hydrolysis for the production of biofuels. This method common uses ethanol as the organic solvent. However, this creates an economic issue with the product stream, as ethanol becomes a product and input. This project sought to explore how decreasing the use of ethanol in organosolv pretreatment affected the recoverability of sugars after enzymatic hydrolysis. Loblolly pine (Pinus taeda L.) was pretreated at 170 °C for 60 minutes in 1% dilute sulfuric acid and an ethanol concentration varying from 65% to 35%. Compositional …

Municipal Composting And Organic Waste Diversion: The Case Of Fayetteville, Arkansas, Michael E. Hoppe

Biological and Agricultural Engineering Undergraduate Honors Theses

It is estimated that 40% of food is wasted in the United States; representing $165 billion in wasted resources. A vast majority of that wasted food is ultimately placed in landfills where it decomposes and releases harmful greenhouse gases (GHGs). In fact, food waste alone is responsible for 23% of annual methane emissions for the US. This has a huge impact on global climate change due to the potency of methane as a greenhouse gas. Currently only 5% of the food waste produced is recovered across the nation. Source reduction would be the best solution to reducing this food waste, …

Strengthening Of Lightweight Reinforced Concrete Beams Using Carbon Fiber Reinforced Polymers (Cfrp), Tariq Al Jaafreh

Civil Engineering Dissertations - Archive

This research aimed to investigate the effect of utilizing “Fiber Reinforced Polymer” (FRP) on the light weight concrete beams. The main hypothesis is that such utilization of the FRP will lead to strengthened lightweight beams. The research that has been done on this relationship is somewhat broad in the scope and have mostly focused on the normal-weight concrete. However, only few studies that have considered the light weight concrete. Eight Beams were tested in this research under four point bending test. Two beams were taken as a control beams without any external bonding of Carbon Fiber Reinforced polymer. Another two …

Gold Nanoparticle Colorimetric Sensing Technology, Eve Borden

Nanoscale Science & Engineering (discontinued with class year 2014)

No abstract provided.

Size Controlled Formation Of A Collagen-Based Drug Delivery System, Leonardo Bezerra

Nanoscale Science & Engineering (discontinued with class year 2014)

This study investigates and troubleshoots various factors involved in the generation of collagen-based particles, such as volume of solution, temperature, and incubation time for the purposes of a potential colorectal cancer targeting drug vehicle. The particles were generated via loading into a gel mold and show a 20-200 fold decrease in size compared to those created only under chemical means.

Fundamental Interdiffusion Analysis Of Ruthenium And Cobalt Films, Bartlet Deprospo

Nanoscale Science & Engineering (discontinued with class year 2014)

No abstract provided.

Graphene’S Electronic Surface States On Metal Substrates, Alex De Palma

Nanoscale Science & Engineering (discontinued with class year 2014)

Graphene is a 2-­‐D sheet of sp2 bonded carbon atoms with exceptional electrical properties. Particularly, graphene has a very high carrier mobility (~200,000 cm2/V·∙s). This is largely due to graphene’s unique electronic structure, wherein charge carriers are effectively massless Dirac fermions. However, the unique electronic structure of graphene has been shown to be affected by the underlying substrate. In this study, we characterize the electronic structure of graphene on copper. Electron energy loss spectroscopy is employed to observe the surface plasmon excitations of graphene. A small pi plasmon excitation is observed, suggesting that the graphene/Cu interaction is weak and non-­‐covalent. …

Modeling Secondary Electron Trajectories In Scanning Electron Microscopes, Kevin Mcnamara, Joshua Miller

Nanoscale Science & Engineering (discontinued with class year 2014)

The efficiency of secondary electron collection by a scanning electron microscope detector is not generally known, particularly as the electric field on the detector is varied. It is often assumed that the detector collects almost all of the secondary electrons emitted from the sample. This works seeks to better understand the mechanism of secondary electron collection by the detector in order to optimize collection efficiency. The benefit of collecting more secondary electrons is the enhancement of the signal-to-noise ratio, which means better quality images can be obtained, allowing us to better understand the relationship between secondary electron images and the …

Modeling Secondary Electron Trajectories In Scanning Electron Microscopes, Joshua Miller, Kevin Mcnamara

Nanoscale Science & Engineering (discontinued with class year 2014)

The efficiency of secondary electron collection by a scanning electron microscope detector is not generally known, particularly as the electric field on the detector is varied. It is often assumed that the detector collects almost all of the secondary electrons emitted from the sample. This works seeks to better understand the mechanism of secondary electron collection by the detector in order to optimize collection efficiency. The benefit of collecting more secondary electrons is the enhancement of the signal-to-noise ratio, which means better quality images can be obtained, allowing us to better understand the relationship between secondary electron images and the …

Comparison Of Construction Methods For Building An Underground Freight Transportation In Texas, Niloofar Rezaei

Civil Engineering Theses - Archive

Freight transportation by trucks constitutes approximately 80% of total freight transportation in Texas and it is expected to approximately double by the year 2040. Social and environmental costs are adverse impacts of moving freights by trucks. Underground Freight Transportation (UFT) significantly reduces these negative impacts and is more sustainable method of freight transportation. UFT includes close-fitting vehicles carrying freight through underground pipelines or tunnels between terminals. The main objective of this research is to compare two construction methods: (1) tunneling using tunnel boring machine (TBM) and (2) tunneling using open-cut. To conduct this research, a comprehensive literature search on various …

Enhancing Productivity By Using Building Information Modeling Applications In Pipeline Construction Projects, Harsha Vardhan Reddy Guduru Penusila

Civil Engineering Theses - Archive

Building Information Modeling (BIM) is a technology and associated set of processes to produce, communicate, and analyze building models. BIM is a new concept within the construction industry. The objective of this thesis is to utilize BIM in pipeline construction projects as one of the pioneering steps to reduce rework and delays due to unforeseen conditions. This thesis presents evaluation and recommendations to help pipeline construction industry’s transition from traditional two-dimensional drawings to a BIM management process aiding owners and contractors to develop and implement a basic form of BIM technique to manage their projects. This thesis uses two pipeline …