Engineering Commons^™

An Electromagnetic Coupling Model For Side-Channel Analysis, Michael L. Schena

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

This thesis presents an EM coupling model used to enhance power, side-channel measurements used in CPA. The Kalman filter is used to combine measurements of magnetic flux density with voltage or current traditionally used to measure power consumption. The DES encryption algorithm is used to evaluate CPA using EM coupled power measurements compared to traditional power measurements.

The Child Brain Computes And Utilizes Internalized Maternal Choices, S. Seung-Lark Lim, J. Cherry C. Bradley, A. Davis, S. N. Balakrishnan, O. Ha, J. Bruce, A. Bruce

Mechanical and Aerospace Engineering Faculty Research & Creative Works

No abstract provided.

Wallarm, Amanda Dinh, Kate Walls

Mechatronics Final Projects

The nature of our project is essentially an upgraded alarm clock that ensures that the user will wake up at the time set. Figure 1 displays the hardware of the project and has colored circles to indicate different components. The alarm functions by initially sounding a loud buzzer (red) at the set alarm time. If the user decides to snooze the alarm by pressing the snooze button (purple), the alarm will wait for a given amount of time before setting off the buzzer again. It will then trigger a Servo motor (pink) that will flip a traditional toggle switch to …

Smart Fan, Sang Choi, Shawn Sunday

Mechatronics Final Projects

The conventional desk fans rely on manual user inputs such as buttons or some sort of mechanical inputs that require user’s physical contact. The Smart Fan, however, is a fan that is purely operated by sound as user input to adjust speed and directionality of the fan. The device listens for user to provide sound input such as clapping, snapping or tapping through microphones attached on the front and the sides of the device.

Mechalele (Self-Playing Ukulele), Timothy F. Davison, Arsenio Gonzalez, Taylor Piske

Mechatronics Final Projects

This project involves the design and implementation of a self-playing ukulele. The ukulele plays chords and plucks open strings based on a song or chord progression selected by the user. Each string on the ukulele has a designated hobby servo motor that plucks the string with pre-programmed timing as is shown in Figure 1 (3). The plucking is achieved by attaching a flexible piece of cardboard to the shaft of the servo to act as the guitar pick. By moving the motors together at once, the action of strumming can be approximated. The design uses the last three frets on …

Simulation Of Conservation Practice Effects On Water Quality Under Current And Future Climate Scenarios, Carlington W. Wallace

Open Access Dissertations

Analysis of the effects of implementing different conservation practices, as well as increased levels of conservation practices under existing and projected future climate, will determine if current conservation practice recommendations will be sufficient to maintain soil and water resources. The Soil and Water Assessment Tool (SWAT) was used to study four watersheds of different sizes (CCW = 680 km2, F34 = 183 km2, AXL = 42 km 2 and ALG = 20 km2) located in Northeastern Indiana. The overarching goal of this study was to evaluate the effect of various agricultural practices on runoff and agricultural chemical losses under current …

Development And Analysis Of A Statics And Kinematics Demonstration As A Learning Tool In The Biomechanics Classroom, Bethany D. Knight

Biomedical Engineering Undergraduate Honors Theses

This study was done with the objective of determining if students in the biomedical engineering department at the University of Arkansas would gain better understanding of basic biomechanics principles through the implementation of in-class demonstrations. Biomechanics was chosen because it is the first class taken in sequence after the “Introduction to Biomedical Engineering” class. A pre-demonstration survey was administered to gauge how comfortable the students were with the topics on the syllabus. Two demonstrations were done in class and related homework was assigned. The post-semester survey was administered and collected to determine how effective the students felt the presentations to …

A 'Tissue Model' To Study The Barrier Effects Of Living Tissues On The Reactive Species Generated By Surface Air Discharge, Tongtong He, Dingxin Liu, Han Xu, Zhichao Liu, Dehui Xu, Dong Li, Qiosong Li, Mingzhe Rong, Michael G. Kong

Bioelectrics Publications

Gelatin gels are used as surrogates of human tissues to study their barrier effects on incoming reactive oxygen and nitrogen species (RONS) generated by surface air discharge. The penetration depth of nitrite into gelatin gel is measured in real time during plasma treatment, and the permeabilities of nitrite, nitrate, O₃ and H₂O₂ through gelatin gel films are quantified by measuring their concentrations in the water underneath such films after plasma treatment. It is found that the penetration speed of nitrite increases linearly with the mass fraction of water in the gelatin gels, and the permeabilities of …

Pentaerythritol Triacrylate-Co-Trimethylolpropane Nanocomposite Scaffolds As Osteogenic Components For Bone Tissue Engineering, Mollie Marie Smoak

Honors Capstones

No abstract provided.

Using Portable Transducers To Measure Tremor Severity, Rodger J. Elble, James Mcnames

Electrical and Computer Engineering Faculty Publications and Presentations

Background: Portable motion transducers, suitable for measuring tremor, are now available at a reasonable cost. The use of these transducers requires knowledge of their limitations and data analysis. The purpose of this review is to provide a practical overview and example software for using portable motion transducers in the quantification of tremor.

Methods: Medline was searched via PubMed.gov in December 2015 using the Boolean expression “tremor AND (accelerometer OR accelerometry OR gyroscope OR inertial measurement unit OR digitizing tablet OR transducer).” Abstracts of 419 papers dating back to 1964 were reviewed for relevant portable transducers and methods of tremor analysis, …

A Stabilized Finite Element Dynamic Overset Method For The Navier-Stokes Equations, Chao Liu

Masters Theses and Doctoral Dissertations

In terms of mesh resolution requirements, higher-order finite element discretization methods offer a more economic means of obtaining accurate simulations and/or to resolve physics at scales not possible with lower-order schemes. For simulations that may have large relative motion between multiple bodies, overset grid methods have demonstrated distinct advantages over mesh movement strategies. Combining these approaches offers the ability to accurately resolve the flow phenomena and interaction that may occur during unsteady moving boundary simulations. Additionally, overset grid techniques when utilized within a finite element setting mitigate many of the difficulties encountered in finite volume implementations. This research presents the …

Developing Modeling, Optimization, And Advanced Process Control Frameworks For Improving The Performance Of Transient Energy-Intensive Applications, Seyed Mostafa Safdarnejad

Theses and Dissertations

The increasing trend of world-wide energy consumption emphasizes the importance of ongoing optimization of new and existing technologies. In this dissertation, two energy–intensive systems are simulated and optimized. Advanced estimation, optimization, and control techniques such as a moving horizon estimator and a model predictive controller are developed to enhance the profitability, product quality, and reliability of the systems. An enabling development is presented for the solution of complex dynamic optimization problems. The strategy involves an initialization approach to large–scale system models that both enhance the computational performance as well as the ability of the solver to converge to an optimal …

Growth, Characterization And Simulation Of Tungsten Selenide Thin Films For Photovoltaic Applications, Qinglei Ma

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

An excellent candidate for an earth abundant absorber material is tungsten selenide (WSe₂) which can be directly grown as a p-type semiconductor with a band gap value that matches well the solar spectrum. Although several fabrication methods were reported, further improvement is highly needed to make high quality WSe₂ films. In addition, the numerical modelling of WSe₂ solar devices is highly desired to assess the overall utility of the material. In this work, the growth and characterization of tungsten selenide thin films are investigated, as well simulations of homo- and hetero-junction devices. In the first part, …

Temporally And Spatially Resolved Quantification Of Hemodynamic Forces And Endothelial Mechanics, Lori M. Lambert

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

The endothelium is a thin layer of endothelial cells that line the interior surface of an artery. Due to their direct contact with blood flow, endothelial cells experience varying hemodynamic forces and respond to these forces by altering their morphology. When plaque and other substances accumulate in the walls of arteries, i.e., atherosclerosis, endothelial cells have abnormal responses to blood flow. Studying atherosclerosis progression is, therefore, a two-fold investigation into 1) the hemodynamic forces that cause endothelial responses, and 2) the biological and mechanical responses of endothelial cells. The ultimate goal of this study was to develop an experimental …

Markov-Based Ranking Methods, Baback Vaziri

Open Access Dissertations

Ranking methods are an essential tool to help make decisions. This dissertation document examines different aspects of the theory and application of pairwise comparison ranking methods, specifically those that use Markov chains. First, a new method is developed to solve a traditional recruiting problem, and is shown to improve the predictive power of its ranking. Next, modifications are made to an existing method that theoretically improves the reliability, while maintaining the rank integrity. Last, a framework is developed that defines a fair and comprehensive ranking method, and several popular methods are evaluated in their ability to adhere to the said …

A Cross-Sectional And Mixed-Method Assessment Of Safety Culture And Safety Climate At A Regional Airline, Micah S. Walala

Open Access Dissertations

The researcher applied a mixed methods approach to conduct a cross-sectional assessment of the safety culture, safety climate, and SMS at a regional airline in the United States. Data collection techniques were comprised of interview, on-line-survey, and a focus group activity. Participants in the current study were maintenance technicians, flight attendants, dispatchers, pilots, and managers. Results indicated significant differences of perception of safety climate, safety culture, and Safety Management System between the maintenance technicians and flight attendants. The length of time a participant had worked at the subject airline and age of the participant appeared to be significant factors of …

Investigation Of Climate Variability And Climate Change Impacts On Corn Yield In The Eastern Corn Belt, Usa, Ruoyu Wang

Open Access Dissertations

The increasing demand for both food and biofuels requires more corn production at global scale. However, current corn yield is not able to meet bio-ethanol demand without jeopardizing food security or intensifying and expanding corn cultivation. An alternative solution is to utilize cellulose and hemi-cellulose from perennial grasses to fulfill the increasing demand for biofuel energy. A watershed level scenario analysis is often applied to figure out a sustainable way to strike the balance between food and fuel demands, and maintain environment integrity. However, a solid modeling application requires a clear understanding of crop responses under various climate stresses. This …

Development And Characterization Of Adhesive Hydrogels For Stem Cell Culture, Erin Byrne Rousseau

Nanoscale Science & Engineering (discontinued with class year 2014)

Pluripotent embryonic stem cells (ESCs) offer the unique capacity to differentiate into almost any cell type and have sweeping implications in both basic research and clinical applications. However, unregulated differentiation can cause issues, preventing ESCs from entering clinical research. In order to maximize ESC growth, three dimensional culturing has been utilized in order to have results more similar to in vivo conditions. In the case of alginate scaffolds, cell adhesion sites are missing from the matrix, leading to differentiation. We propose that the inclusion of adhesive polymer to the alginate scaffold will increase cell attachment and maintain pluripotency. The polymer …

Optimization And Modeling Of An Energy Harvesting Optical Micropropeller For Microfluidic Applications, Jacqueline Elwood

Nanoscale Science & Engineering (discontinued with class year 2014)

The design and materials optimization of a optical micropropeller comprised of silver nanorods on a fused silica substrate was developed. A combination of surface plasmon resonance, thermophoretic and convective forces enable rotation of the micropropeller in an aqueous environment. This work aims to eliminate the dependence of optical micropropellers on the requirement for a light source by relying on a blackbody radiation energy harvesting principle. This energy harvesting principle is able to plasmonically excite noble metal nanorods of a specific aspect ratio at specific wavelengths that correspond to an ambient temperature. By investigating the dependence of the aspect ratio and …

Optimization And Modeling Of An Energy Harvesting Optical Micropropeller For Microfluidic Applications, Jerry Shih

Nanoscale Science & Engineering (discontinued with class year 2014)

Geometry for a plasmonically active micro-propeller is designed in Matlab using a Metallic Nano-Particle Boundary Element Method (MNPBEM) toolbox in order to predict its optical response in long wavelengths of electromagnetic radiation. Electric field maps are plotted to determine the feasibility generating torque using the energy harvesting principle. Results indicate electric field lines that would promote rotation and the scattering cross section would cause nano-rods sitting on the propeller to radiate thermal energy. COMSOL modeling is performed to model the evolution natural convection currents as a result of the nano-rod heating which is then optimized to further promote rotation of …

Predicting Structures And Properties Of Transition Metal Dichalcogenide Alloys Using Density Functional Theory, Lucas R. Bruzgulis

Nanoscale Science & Engineering (discontinued with class year 2014)

Workflows for computationally simulating transition metal dichalcogenides using density functional theoretic methods and cluster expansion were established, as implemented in the Quantum ESPRESSO and Alloy Theoretic Automated Toolkit computer codes, respectively. Effects of energy cutoff values and k-point density on convergence of DFT results were investigated for the MoS2 structure, and theoretic band structure calculations for MoS2 and WS2 were performed. The MoXW(1-X)S2 alloy system was also investigated using the maps code in the Alloy Theoretic Automated Toolkit in order to generate a composition vs energy plot. The application of Special Quasi-random Structures to further research into TMDC alloy systems …

Haul Truck Tires Recycling, Jessica N. Lizarazu

Chemical Engineering Undergraduate Honors Theses

The disposal of large Off-the-Road (OTR) tires is an increasingly important concern. These tires can weigh up to 8,450 pounds with an overall diameter and width of approximately 140.7 inches and 45.1 inches respectively. OTR tires are used for mining vehicles such as haul trucks, wheel loaders, backhoes, graders, and trenchers. These new tires cost between $38,000 and $50,000 each, depending on multiple factors including oil prices and the cyclical nature of the industry. Haul trucks contain six tires per vehicle, and mines replace these tires around every 9-12 months. Statistics regarding discarded OTR tires are not provided by the …

Removal Of Endocrine Disrupting Compounds From Secondary Municipal Wastewater, Dustin R. Resz

Chemical Engineering Undergraduate Honors Theses

Approximately 1.2 billion people around the world live in areas of physical water scarcity. This could increase to half of the world’s population by 2030 and could displace 24 to 700 million people unless steps are taken to ensure adequate water supply.1 Water scarcity is an escalating issue within the United States, specifically in Western inland states with arid climates. This scarcity is encouraging communities to investigate tertiary level municipal wastewater treatment, allowing for reuse of wastewater. Unfortunately, wastewater contains numerous contaminants that are not regulated by the Environmental Protection Agency (EPA) under the Safe Drinking Water Act (SDWA). Many …

Financial Performance In Upstream, Downstream, And Integrated Oil Companies In Response To Oil Price Volatility, Jonathan P. Garcia

Finance Undergraduate Honors Theses

This paper investigates the relation between crude oil price volatility and stock returns among oil companies using a three-part methodology, by using the West Texas Intermediate (WTI) as oil price benchmark. I asses the various indicators that set signals for oil price volatility and the interpretation of each (PMI, S&P500, DJIA, and World Crude Oil Output). This research also focuses on the relation between different types of companies in the oil industry (integrated, upstream, and downstream) and how each type of company will be assessed in a particular way to predict abnormal returns, based on market data and statistical analyses …

Optimizing Dam Siting In The Paru River In Brazil Using A Multi-Objective Approach, Henrique De Paula

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

How should a decision-maker choose which hydropower plant to build in a given river? Hydropower plant expansion is a task that involves several stakeholders, objectives, and resources. It requires that decision-makers use not only experience and previous knowledge to come up with their final decision, but also the use of tools to help them to decide, as well as to support their choices. The present project developed a computation model to optimize the choice of hydropower plants that can be built within a given river, considering three different objectives - energy generation, flooded surface area and river connectivity. The input …

Mobile Device-Based Location Services Accuracy, Hasan Seyyedhasani, Joseph S. Dvorak, Michael P. Sama, Tim S. Stombaugh

Biosystems and Agricultural Engineering Faculty Publications

The objective of this study was to characterize the expected position accuracy when using popular mobile devices for location-based agricultural decision-making activities. This study utilized Android-based Nexus 7 tablets and tested the operation of the three location services available on this system in a 24-h fixed location test and a shorter duration multiple location field test. In the 24-h test, the “network” location system had a measured error of 37.19 m while reporting an accuracy of 55.56 m. The “gps” location system had a measured error of 2.57 m and a reported accuracy of 3.20 m. Multiple tests were conducted …

Cloning, Fed-Batch Expression And Purification Of A Novel Anti-Candida Peptide And Development Of A Cleavage Resistant Variant Of Green Fluorescence Protein, Rudra Palash Mukherjee

Graduate Theses and Dissertations

This work illustrates that the intelligent design of a bioprocess for the production of peptides of various length is possible by having a prior knowledge of desired product, cell line, fermentation conditions, and choices for downstream recovery. Cloning, expression, and recovery of a novel 12-mer anti-Candida peptide served as an illustrative case for a proposed Escherichia coli platform. The antifungal peptide, expressed as a fusion to GFPUV during high call density fed-batch, was recovered from cell lysate, concentrated using ion exchange chromatography, and finally cleaved with cyanogen bromide. The platform was capable of producing active peptide capable of arresting the …

Design Of An Assistive Technology Adaptive Switch Using An Inertial Measurement Unit, Ethan Storm Williams

Graduate Theses and Dissertations

A new assistive technology switch for people with disabilities was developed utilizing an Inertial Measurement Unit (IMU) as the sensor technology. The hardware can be customized through firmware to provide custom switch activations on a person by person basis. The firmware is customized to recognize specific data features in the IMU data which identify the desired switch activation movement performed by the user. In this way, the switch can be adapted to activate based on the movements of the user. During this research, the generic hardware platform, including the IMU sensor technology and Bluetooth communications, was designed and tested. An …

A Brief Review Of Security In Emerging Programmable Computer Networking Technologies, Egemen K. Çetinkaya

Electrical and Computer Engineering Faculty Research & Creative Works

Recent programmable networking paradigms, such as cloud computing, fog computing, software- defined networks, and network function virtualization gain significant traction in industry and academia. While these newly developed networking technologies open a pathway to new architectures and enable a faster innovation cycle, there exist many problems in this area. In this article, we provide a review of these programmable networking architectures for comparison. Second, we provide a survey of security attacks and defense mechanisms in these emerging programmable networking technologies.

Emerging Investigators Series: Virus Mitigation By Coagulation: Recent Discoveries And Future Directions, Joe Heffron, Brooke K. Mayer

Civil and Environmental Engineering Faculty Research and Publications

Waterborne viruses are widespread and persistent in the environment. Coagulation is an effective process for mitigating viruses in drinking water. This review examines recent studies of virus mitigation by coagulation processes in the context of the latest scientific advances. Virus sorption is impacted by electrostatic forces, as well as the hydrophobic effect, steric hindrance, hydrodynamics and interactions with the water matrix. Organic matter in the water may hinder or enhance sorption, depending on virus structure and environmental factors. In addition to physical separation in flocs, coagulation processes have been shown to inactivate viruses. This review evaluates reports of virus inactivation …