Engineering Commons^™

Custom Engineered Nanomaterials For Energetics And Energy Applications, Ani Abraham

Dissertations

Recent interest in reactive material has shifted to more custom formulations targeting specific applications. In this work, preparation and characterization of nanomaterials used for several energetics and energy applications are addressed.

The main challenge of this effort is to design and prepare nanomaterials which have significant improvements associated with combustion dynamics, reaction rates, sensitivity, biocidal effectiveness, moisture stability, and are environmentally safer over the existing energetics. Nanomaterials that are used to defeat stockpiles of chemical and biological weapons, modify ionosphere properties for transmission of optical and radio signals, and for energy storage are prepared under room or cryogenic temperatures via …

Predicting Fatigue Crack Initiation In Metals Using Dislocation Dynamics Simulations, Veera Sundararaghavan, Christian Heinrich

International Workshop on the Environmental Damage in Structural Materials Under Static Load/Cyclic Loads at Ambient Temperatures

The presented work aims at deepening the understanding of the initiation of fatigue cracks in metals. The work is based on an argument of Mura and Nakasone [1] where an energy criterion is used to predict the initiation of a fatigue crack from a slip band. The discussion is based on the evolution of dislocation networks, as these are the prime cause for permanent deformation in metals. Using high performance computing, 3D dislocation dynamics simulations [2] are performed over several cycles to study the growth of the dislocation arrangement. Then the evolution of energy in the system is determined, including …

Raman Spectroscopic Analysis Of Fingernail Clippings Can Help Differentiate Between Postmenopausal Women Who Have And Have Not Suffered A Fracture, James R. Beattie, Niamh M. Cummins, Clare Caraher, Olive M. O'Driscoll, Aruna T. Bansal, Richard Eastell, Stuart H. Ralston, Michael D. Stone, Gill Pearson, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

Raman spectroscopy was applied to nail clippings from 633 postmenopausal British and Irish women, from six clinical sites, of whom 42% had experienced a fragility fracture. The objective was to build a prediction algorithm for fracture using data from four sites (known as the calibration set) and test its performance using data from the other two sites (known as the validation set). Results from the validation set showed that a novel algorithm, combining spectroscopy data with clinical data, provided area under the curve (AUC) of 74% compared to an AUC of 60% from a reduced QFracture score (a clinically accepted …

Optimum Distance Between Ground Base Stations For High-Speed Train Communications Using Free-Space Optical Laser Links, Sina Fathi Kazerooni

Theses

High-Speed trains (HSTs) can travel at speeds up to 430 Km/h. The increasing adoption rate of HSTs, and large number of Internet-connected digital devices, pose a great demand for a fast and reliable Internet connection in high-speed trains. Different radio-frequency (RF) wireless communication systems have been studied for HSTs. However, RF wireless communications in high-speed mobility environments suffer from frequent handovers, penetration loss, and Doppler effect. These problems promote the use of other technologies such as free-space optical (FSO) communications to provide reliable Internet connection for HST’s passengers.

Two different approaches for performing signal handover using FSO technology for ground …

Unique And Diverse Voices Of African American Women In Engineering At Predominately White Institutions: Unpacking Individual Experiences And Factors Shaping Degree Completion, Ellise M. Davis Lamotte

Graduate Doctoral Dissertations

In 2012, 1% of the African American women who enrolled in an undergraduate engineering program four years prior graduated, amounting to 862 African American women graduating with engineering degrees. This qualitative study, anchored in interpretive phenomenological methodology, utilized undergraduate socialization with an overarching critical race theory lens to examine the manner in which African American women in engineering, such as the 862, make meaning of their experiences at predominately White institutions.

The findings of the study are important because they corroborated existing research findings and more importantly, the findings in this study emphasize the importance of faculty and institutional agent …

Multi-Stage Axial Compressor With Counter-Rotation Using Accessory Drive, Vinod Gehlot, Magdy S. Attia

Publications

A multi-stage axial compressor for counter rotation. A first series of rotor blade assemblies are mounted on and rotate with the driveshaft, each rotor blade assembly of the first series comprising a rotating stage of the multi-stage axial compressor. A second series of rotor blade assemblies provide a counter-rotating stage of the multi-stage axial compressor. An accessory drive links the second series of rotor blade assemblies to the driveshaft and causes counter-rotation of the second series of rotor blade assemblies.

Response Of Stretch-Injured Schwann Cells, Stephanie Iring

Theses

Axon fibers are covered by myelin sheath. After axonal damage, demyelination follows with the production of debris. In the Central Nervous System many studies have been performed to observe and analyze stretch injured axons, but very little has been done to study the white matter axonal tracts, oligodendrocytes. Schwann cells can help take a first look into stretch injured glia cells from the Peripheral nervous system. In order to observe changes in Schwann Cells a stretch injury device is used to produce the effects of severe and moderate injuries. Schwann Cells are stretch injured in both their undifferentiated and differentiated …

Effect Of Melt Method On Thoracolumbar Connective Tissue, Faria Sanjana

Theses

Approximately, 31 million adults in the United States suffer from low back pain (LBP). Altered connective tissue structure has been identified in adults with chronic LBP. Numerous novel treatments are being developed targeting the connective tissue and nervous system to relieve people from LBP. One such self-care treatment is the MELT method. The objective of this study was to determine whether thickness of thoracolumbar connective tissue and other biomechanical and viscoelastic properties of myofascial tissue in the low back region change in subjects with chronic LBP as a result of MELT.

Using ultrasound imaging and an algorithm developed in MATLAB, …

Effect Of Temperature On The Fracture Behavior Of Lead-Free Solder Joints, Patrick Thompson

Theses

The objective of the present study is to examine the effect of temperature on the fracture behavior of Cu-SAC305-Cu joints. To this end, double cantilever beam (DCB) specimens, consisting of a thin layer of Sn96.5Ag3.0Cu0.5 (SAC305) solder sandwiched between two copper bars, fabricated under standard surface mount (SMT) processing conditions are fractured under various temperatures with a MTS machine equipped with an environment chamber. The load-displacement behavior corresponding to crack initiation and the subsequent toughening before ultimate failure and the displacements near crack tip are recorded and used to calculate the fracture energy release rates. The fracture surfaces and the …

Koh Etching Of Silicon, Ying Wang

Theses

In this research, a series of comparative etching experiments on silicon wafers have been carried out using potassium hydroxide (KOH) for different experimental etching conditions for concentration, temperature and time on (100) orientation p-type silicon wafers. Besides the basic etching conditions, the position of the immersed wafer also has unpredictable effect on the etching process. This may be attributed to the relative contact position between the surface of the immersed wafer and the flow patterns of the stirred etching solution.

The surface morphology analysis indicates that the specific position of the wafer, with respect to the flow of the etchant, …

An Electromechanical System For Characterization Of Piezoelectric Materials, Ahmet Sait Asan

Theses

Piezoelectric materials have been used in medical applications for a long time due to their unique characteristics, which is to respond to mechanical stimulation by producing an electrical current and vice versa. They perform a pivotal role in medical applications both for diagnostic and therapeutic purposes. In this regard, characterizing the piezoelectric properties of these materials is crucial for their usage. In this particular study, an electromechanical system for measurement of piezoelectric output signals is designed and tested. The project is motivated by the question: can the piezoelectric properties be characterized by applying different mechanical stimulation waveforms and frequencies. Two …

Infrared Imaging - Case Studies And Applications, Shuang Du

Theses

Recent advancements in the manufacture of solid state detectors have led to significant improvements in the use and applications of infrared (IR) imaging. Compared with traditional imaging in visible light, infrared imaging has abilities to convey significant additional information. Applications in medicine require wavelengths in the range of 0.8 to 25 microns while metrology and astronomy, traditionally, require wavelengths in the range of 25 microns to 1 mm.

In this study, infrared imaging has been used as a tool to characterize a variety of objects and systems. Some of these case studies have been considered under conditions of thermodynamic non-equilibrium. …

Diffusivity Of Drug Actives In Transdermal Drug Delivery (Tdd), Natali R. Gendelberg

Theses

Transdermal Drug Delivery (TDD) through skin patches has many advantages including the following: slow and continuous administration of the therapeutic over long periods of time, timely dosage, accessibility, kinetic maneuverability, elimination of the “First Pass Effect” and negative side effects on the digestive tract. All of the above justify investment into further development of TDD therapies, despite the skin permeability restrictions posed on size and charge by the skin. As skin permeability varies between all individuals based on age, ethnicity and lifestyle, the determination of the proper drug dosages to be contained in the skin patch is highly reliant on …

Antibacterial Efficacy Of Nanometals In Conjunction With Electrical Stimulus, Syed A. Hussain

Theses

Hospital related infections generally result from the combined effect of preexisting bacteria on the patient and invasive devices. This demonstrates the significance in improving these medical devices to increase the quality of life of the patients that require them. This study will attempt to evaluate the antibacterial efficacy of nanocopper particles and an electrical stimulus for the usage in medical device development and the hospital environment.

For devices such as catheters, infections typically result from bacteria entering the body from the outside. This is accomplished by bacteria attaching themselves to the exterior of the device and producing biofilm which allows …

Dissolution Kinetics Of Model Api In Molten Polymer Excipients During Batch Processing, Shen Ji

Theses

In the pharmaceutical industrial application field, hot-melt extrusion (HME) has been recently introduced to develop new solid dosage forms and products. By dissolving the poorly–soluble active pharmaceutical ingredients (API) into water-soluble polymers, the bioavailability of the Class II (with low solubility and high permeability in water) API in Biopharmaceutical Classification System (BCS) could be significantly improved in the body. For readily water-soluble API, HME provides a new approach to produce a controlled release drug system. Hence, pharmaceutical HME is a promising processing method in the pharmaceutical industry.

However, HME has not been widely applied into the pharmaceutical industry. The thermal …

Magnetic Augmented Rotation System (Mars ) - Properties And Performance, Ruolei Liu

Theses

Magnetic Augmented Rotation System (MARS) is proposed as a system for conversion of mechanical energy into electrical energy. It works on the principle of magnetic coupling. Because it is contactless, compared with traditional gears, it increases the transfer efficiency from a driver to a rotor; reduces noise, requires no lubrication and has low maintenance cost. In order to assess the performance of MARS, a charging system based on MARS is implemented. This system includes rechargeable batteries in the range of 6 volts to 12 volts, a load in the form of a light bulb, a voltage transformer, and digital multimeter …

Simulation Of A Low Voltage Customer Microgrid Using Petri Nets, Joshua Mark

Theses

With renewable energy coming to the forefront of how power is generated and delivered to the modern consumer, Microgrids are emerging as an optimal and efficient method for implementing renewables and changing the infrastructure of the dated transmission and distribution grid. This thesis work presents mathematical models of Petri Nets for the simulation of a low voltage customer Microgrid. Using previous work created in this specific field, a Hybrid Petri Net is modified such that it consists of multiple distributed generators, storage, and the utility which is referred to as the main distribution grid in this thesis. A Discrete Petri …

Effectiveness Of Water Quality Benefits Provided By Stormwater Management Facilities/Infiltration Basin, Vinicius Rodrigues De Mattos Barreto

Theses

Stormwater Best Management Practices (BMP) and devices are systems frequently built under assumed design performances, but rarely verified after construction. Their effectiveness in protecting the environment against pollutants carried by stormwater runoff has been extensively questioned and investigated. This research presents a case study of an infiltration basin in Medford, NJ to verify if the 80% expected Total Suspended Solids (TSS) removal as stated in the New Jersey Stormwater BMP Manual is actually achieved. A sampling pit was installed on the site and infiltrated water samples were collected during three rain events and TSS measurements were compared with the inflow. …

Preparation, Ignition And Combustion Of Reactive Metal-Sulfur Nanocomposites, Ziyue Zhong

Theses

Mechanical milling is applied to synthesize reactive metal-sulfur nanocomposites. Specifically, magnesium-sulfur, aluminum-sulfur and zirconium-sulfur nanocomposite powders are prepared. Each powder particle contained homogeneously mixed sulfur and respective metal. These materials are expected to be stable in room air. They are also expected to release sulfur upon ignition; the released sulfur may serve as a biocidal agent. The ignition temperatures of the three prepared sulfur-bearing materials fall in a range of 750 - 1000 K. All prepared materials are successfully ignited in electrostatic discharge experiment as well as in a constant volume explosion experiment. The most sensitive material to spark ignition …

Development And Analysis Of Aluminum-Ptfe Reactive Composite Material, Siva Kumar Valluri

Theses

The shortcomings of micron sized aluminum due to the oxide barrier and two phase loses pose a hindrance for its efficient use as a fuel. In this study a fluoropolymer; Teflon’s inclusion in micron sized -325 mesh aluminum is suggested as a replacement to aluminum. Aluminum Teflon based energetic material see great potential for use in pyrotechnics, propellants and even explosives. A composite with composition Al-PTFE (90-10 wt. %) is prepared through Cryomilling and is shown to be a better method of preparation as compared to room temperature milling. The prepared materials are studied to identify best conditions. The analysis …

Continuum Mechanical Analysis Of Space And Time Dependent Deformation Pattern Of Brain With Blunt Injury, Chen Miao

Theses

Deformation of human brain due to acceleration impact has been widely accepted as the direct connection to the Trauma Brain Injury (TBI). However, the limitation of obtaining deformation data of TBI is a major obstacle to understanding TBI mechanism. This experiment mainly focuses on developing a method to measure deformation pattern of brain with blunt injury. First of all, displacement data of markers on sagittal plane of an injury head model was collected using 3D reconstruction software after an impact test. Second, the displacement data was used to calculate 2D Lagrangian strain tensor and the principal strain. The temporal and …

A Computational Model For Transdermal Diffusion Of Lidocaine And Tetracaine Topical Patches, Qian Dong

Theses

In recent years, transdermal drug delivery patches (TDDP) have developed rapidly. This is because the TDD system has more advantages than traditional drug delivery systems such as oral medicine and intravenous injection. In order to reach the circulatory system of the human body, drug molecules have to pass through the epidermis (outer layer) of the skin. The barrier properties of epidermis originate from low permeability of stratum corneum (SC) which is the outermost layer of the human skin. The objective of this thesis is to build a Finite Element (FE) model, utilizing commercial FE software (ANSYS), that can be implemented …

Water Wave Measurements At Bellsund In The Western Spitsbergen, D. Majewski, W. Sulisz, M. Paprota, M. Szmytkiewicz

International Junior Researcher and Engineer Workshop on Hydraulic Structures

No abstract provided.

Frequencies Of Nappe Vibration For Free-Overfall Structures, M. Lodomez, M. Pirotton, B. Dewals, P. Archambeau, S. Erpicum

International Junior Researcher and Engineer Workshop on Hydraulic Structures

No abstract provided.

Vertical Slot Fishway: Evaluation Of Numerical Model Quality, J. Klein, M. Oertel

International Junior Researcher and Engineer Workshop on Hydraulic Structures

No abstract provided.

Capacity Of Street Inlets With Partially Severed Grate Openings, S. Kemper, A. Schlenkhoff

International Junior Researcher and Engineer Workshop on Hydraulic Structures

No abstract provided.

Prediction Of Hydraulic Jump Location In Some Types Of Prismatic Channels Using Numerical Modelling, M. A. Hafnaoui, R. F. Carvalho, M. Debabeche

International Junior Researcher and Engineer Workshop on Hydraulic Structures

No abstract provided.

Numerical Investigation Of The Pressure On A Round Crested Weir, L. Goffin, S. Erpicum, P. Archambeau, B. J. Dewals, M. Pirotton

International Junior Researcher and Engineer Workshop on Hydraulic Structures

No abstract provided.

Increasing Piano Key Weir Efficiency By Fractal Elements, F. L. Bremer, M. Oertel

International Junior Researcher and Engineer Workshop on Hydraulic Structures

No abstract provided.

Full Proceedings: Ijrewhs 2016, International Association For Hydro-Environmental Engineering And Research

International Junior Researcher and Engineer Workshop on Hydraulic Structures

No abstract provided.