Engineering Commons^™

Ball Pressure Correlations With Peak Impact Force And The Potential For Cumulative Mtbi When Heading A Soccer Ball, Nicolas Leiva, Daniel Y. Shyu, Josh Auger, Eric Nauman

The Summer Undergraduate Research Fellowship (SURF) Symposium

Soccer is a unique sport in which athletes use their heads as tools for gameplay, which may ultimately cause cumulative traumatic brain injuries. Due to rising popularity of soccer in the United States alongside the increased occurrence of CTE and mTBI in other contact sports, there is a growing concern over how to keep the repetitive forces caused by heading, as low as possible. Different variables that can affect the peak force felt when heading a soccer ball can be simulated and compared with in-game data, however, this has never been properly tested before. In the present study two size …

Role Of Sumoylation In Mitochondrial Division In Tetrahymena Thermophila, Ramya Modi, James Forney

The Summer Undergraduate Research Fellowship (SURF) Symposium

SUMOylation is a post translation modification that involves the addition of a small protein called SUMO, Small Ubiquitin-like MOdifier to a target protein. It is an important mechanism for the regulation of gene expression, the maintenance of genomic stability and in modifying nuclear proteins. More recently evidence has emerged for its importance in regulating mitochondrial fission and fusion in mammalian cells. This study evaluates the parameters for optimal staining of Tetrahymena thermophila mitochondria using two different dyes and then examines different cell lines with defects in the SUMOylation pathway. The first staining method uses Mitotracker Green, a vital stain that …

Increasing Maize Tolerance To Drought And Flood With Seed Coating Treatments, Jacob E. Bennett, Achint Sanghi, R. P. Kingsly Ambrose

The Summer Undergraduate Research Fellowship (SURF) Symposium

The lack of irrigation in regions prone to drought, and flooding due to high rainfall or lack of drainage affects seed viability and the subsequent germination and crop establishment. Seed treatment in the form of coatings shows promise as an effective method to preserve the viability of corn (Zea mays) seeds in drought and flood conditions. Chemical formulations may help improve the seed corn vigor under these stressed conditions. This study examined the efficacy of β-aminobutyric acid [BABA] and N-isopropylacrylamide [NIPA] in inducing drought resistance, as well as the ability of lanolin and linseed oil to provide flood …

Brain Inspired Enhanced Learning Mechanism Based On Spike Timing Dependent Plasticity (Stdp) For Efficient Pattern Recognition In Spiking Neural Networks, Sourjya Roy, Gopalakrishnan Srinivasan, Vijay Raghunathan

The Summer Undergraduate Research Fellowship (SURF) Symposium

Artificial neural networks, that try to mimic the brain, are a very active area of research today. Such networks can potentially solve difficult problems such as image recognition, video analytics, lot more energy efficiently than when implemented in standard von-Neumann computing machines. New algorithms for neural computing with high bio-fidelity are being developed today to solve hard machine learning problems. In this work, we used a spiking network model, and implemented a self-learning technique using a Spike Timing Dependent Plasticity (STDP) algorithm, that closely mimics the neural activity of the brain. The basic STDP algorithm modulates the synaptic weights interconnecting …

Large Scale Monolithic Solar Panel Simulation - A Study On Partial Shading Degradation, Suhas V. Baddela, Xingshu Sun, Muhammad A. Alam

The Summer Undergraduate Research Fellowship (SURF) Symposium

Shadow-induced degradation is a major concern for both power output and long-term reliability in solar cells. Apart from the obvious fact that shading reduces the amount of solar irradiance available to solar panels, it may lead to formation of hot spots, where solar cells are forced to reverse breakdown with localized heating, and potentially, permanent damage. To get a better understanding of shadow-induced degradation, we develop an electro-thermal coupled simulator that can self-consistently solve the electrical and thermal distributions of solar panel under arbitrary shading conditions. The simulation framework consists of two part: a) compact models that can describe the …

Mechanical Investigation Of Phase-Transforming Cellular And Origami Materials, John M. Cleveland, David Restrepo, Yunlan Zhang, Pablo Zavattieri, Nilesh Mankame

The Summer Undergraduate Research Fellowship (SURF) Symposium

Cellular materials, such as honeycombs and metallic foams, have attracted much attention due to their exceptional ability to absorb and diffuse mechanical energy. These materials have a wide range of applications, such as improving vehicle crash safety and helmet impact resistance. However, many of these materials are rendered unusable after one application. Phase-transforming cellular materials (PXCMs) utilize a reversible bistable mechanism to facilitate energy absorption from one-dimensional impacts and loads. These mechanisms have the added benefit over other cell structures of reusability. In this study, various PXCM designs are discussed and examined to determine their energy absorption capabilities.

Three different …

High Strain Rate Experiments Of Energetic Material Binder, Roberto Rangel Mendoza, Michael Harr, Weinong Chen

The Summer Undergraduate Research Fellowship (SURF) Symposium

Energetic materials, in particular HMX, is widely used in many applications as polymer bonded explosives (PBX) and rocket propellant. However, when damaged, HMX is known to be an unstable substance which renders it a hazardous material and in some cases unreliable. Finding critical mechanical conditions at high rates that render various forms of energetic materials as unreliable would be vital to understand the effects that vibrations and compression forces have on energetic materials. A better understanding would enable the ability to develop improvements in the manufacturing of PBX and rocker propellant. The method utilized to evaluate the mechanical properties of …

Effects Of Internal Egr On Modern Diesel Engines Internal Equipped With Vva At Idle, Erik R. Santini, Dheeraj B. Gosala, Gregory M. Shaver

The Summer Undergraduate Research Fellowship (SURF) Symposium

Vehicle emissions regulations are continuing to grow more challenging requiring near-zero levels of pollutant emissions. Nitric oxide (NOx) emissions are heavily regulated with the emission limit expected to become 1/10^th of its present limit by 2021. In order to meet the new regulations, improvements in both the engine and the exhaust aftertreatment system are required. Exhaust gas recirculation (EGR) is used to reduce the NOx produced by the engine while the aftertreatment system converts most of the engine-out emissions to safer gases before releasing them to the atmosphere. One of the main challenges with the aftertreatment system is that …

Activity Of Protein Kinase A Attached To Magnetic Beads, Kevin P. Lin, Tamara L. Kinzer-Ursem, Mrugesh K. Parasa

The Summer Undergraduate Research Fellowship (SURF) Symposium

Development of high throughput assays is a crucial step in developing more efficient techniques that aid in many important areas of research today such as drug development or identification of protein structure function relationships. Integration of high throughput assays into more research efforts could drastically decrease the time and cost it takes for a new drug to hit the market. Protein Kinase A (PKA) is an extensively studied protein as it is highly upregulated in cancer and is a hot spot for drug targeting. In this work, azide-tagged PKA is covalently attached to magnetic beads using azide-alkyne cycloaddition, a well-known …

Cartilage Engineering: Optimization Of Media For Chondrogenic Differentiation In Vitro, Evan Surma, Sherry L. Harbin, Hongji Zhang, Stacy Halum

The Summer Undergraduate Research Fellowship (SURF) Symposium

Lower back pain from intervertebral disc injury affects around 84% of the population at some point in their life, which at its worst may cause total immobilization. This pain can only be temporarily relieved by spinal fusion or intervertebral disc replacement; however, both of these cause loss of natural motion in patients by removing damaged fibrocartilage discs. While these techniques help mitigate pain briefly, no permanent solution exists currently to both relieve pain and preserve natural motion. My work may be a solution by eventually providing patient-specific implants that resemble native tissue in the regeneration process that could be absorbed …

Characterization Of Suspension Polymerized Polyacrylamide And Poly(Sodium Acrylate-Acrylamide) Copolymer And Their Size Influence On The Properties Of Concrete, Cole R. Davis, Kendra A. Erk, Stacey L. Kelly

The Summer Undergraduate Research Fellowship (SURF) Symposium

Shrinkage leading to cracking and mechanical instability is a major problem for concrete due to the loss of water during the curing process. However, through the addition of Superabsorbent Polymer (SAP) hydrogels, shrinkage can be prevented, increasing the strength of concrete. Characterization of suspension polymerized polyacrylamide (PAM) poly(sodium acrylate-polyacrylamide) (PANa-PAM) copolymer microsphere sizes, morphology and swelling behavior was conducted before adding them to concrete. Size was determined using microscopy paired with ImageJ analysis. Coulter Counter size characterization was also used to determine the particle size distribution. Swelling behavior was determined using the tea bag method as well as size analysis …

Mechanical Reliability Of Implantable Polyimide-Based Magnetic Microactuators For Biofouling Removal, Christian G. Figueroa-Espada, Qi Yang, Hyowon Lee

The Summer Undergraduate Research Fellowship (SURF) Symposium

Hydrocephalus is a neurological disorder that typically requires a long-term implantation of a shunt system to manage its symptoms. These shunt systems are notorious for their extremely high failure rate. More than 40% of all implanted shunt systems fail within the first year of implantation. On average, 85% of all hydrocephalus patients with shunt systems undergo at least two shunt-revision surgeries within 10 years of implantation. A large portion of this high failure rate can be attributed to biofouling-related obstructions and infections. Previously, we developed flexible polyimide-based magnetic microactuators to remove obstructions formed on hydrocephalus shunts. To test the long-term …

Movement And Distribution Of Bacteria Near Surfaces, Daniel A. Quinkert, Adib Ahmadzadegan, Arezoo M. Ardekani

The Summer Undergraduate Research Fellowship (SURF) Symposium

Bacteria are found everywhere in nature, including within human/animal bodies, biomedical devices, industrial equipment, oceans and lakes. They can be found in planktonic state within a bulk liquid phase or attached to surfaces with the potential to form biofilms. In this study we are interested in the movement and distribution of bacteria near surfaces. The concentrations and fluid interactions of bacteria were characterized at various distances from a surface. Psuedomonas putida F1 was observed in a suspension near a surface. Bacteria movements were visualized with an inverted microscope at 40x magnification. P. putida F1 exhibited greater density in close proximity …

Applications Of Additive Manufacturing Techniques In Making Energetic Materials, Peter A. Cattani, Trevor J. Fleck, Jeff F. Rhoads, Steven F. Son, I. Emre Gunduz

The Summer Undergraduate Research Fellowship (SURF) Symposium

Energetic materials are currently manufactured using methods such as casting, which can only produce certain geometries. Additive manufacturing enables more flexible fabrication and the potential for improved material consistency. Additive manufacturing has transformed many industries, but has only recently been applied to the manufacturing of energetic materials. This paper describes the development of two processes to apply additive manufacturing methods to energetic materials. Method one applies a fused deposition modelling approach (FDM). 5 µm aluminum powder and PVDF were mixed and made into filaments using a Filabot Original filament extruder. Energetic filaments were created composed of 90:10, 80:20, and 75:25 …

Fiber-Optic Imaging In An Internal Combustion Engine Test Rig, Conor Martin, Michael Smyser, Aswin Ramesh, Greg Shaver, Terrence Meyer

The Summer Undergraduate Research Fellowship (SURF) Symposium

The formation of particulate matter (PM/soot), nitrogen oxides (NOx), and other byproducts of the combustion process in diesel engines is controlled by spatiotemporally varying quantities within the engine cylinders which traditional sensors cannot resolve. This study explores the use of an advanced sensing technique using an optical probe which can be used to produce highly spatiotemporally resolved in cylinder images of the flame formation during the combustion stroke. Using a fiber optic cable and custom lensing system adapted to fit a pre-existing pressure transducer port, light from within the cylinder can be transmitted through the imaging probe to a high …

Developing Methods To Characterize Cured-In-Place Pipe (Cipp), Emily N. Conkling, Mahboobeh Teimouri, Andrew Whelton

The Summer Undergraduate Research Fellowship (SURF) Symposium

Cured-in-place pipe (CIPP) is quickly growing as a method to repair aging water pipes. It’s an attractive option for states’ Departments of Transportation, as CIPP doesn’t require any long term or invasive construction. The exact composition of CIPP is poorly understood, even though CIPP leaching is assumed to be the cause of algal blooms, fish kills, and some human illnesses. The goal of this study was to develop methods to characterize what chemicals are present in uncured and cured CIPP resin and at what magnitude. An exhaust capture system was designed, and the condensate collected from this was extracted using …

Comparative Life Cycle Assessment Of Direct And Indirect Solar Water Disinfection Processes In Developing Countries, Jason K. Hawes, Margaret M. Busse, Ernest R. Blatchley Iii

The Summer Undergraduate Research Fellowship (SURF) Symposium

In July 2010, the UN General Assembly recognized the universal human right to sufficient water for health and sanitation (UN…, 2010). The reliable disinfection of this water plays a critical role in public health (Carter and Miller, 2005), and this study investigates the use of four ultraviolet (UV) disinfection methods for use in international development and disaster relief. The study focuses on the life cycle impacts of four direct and indirect solar ultraviolet disinfection systems. Direct solar disinfection refers to exposure of water to solar radiation, while indirect solar disinfection collects solar energy and uses this to power a UV …

Characterization Of Superabsorbent Polymers In Aluminum Solutions, Nicholas D. Macke, Matthew J. Krafcik, Kendra A. Erk

The Summer Undergraduate Research Fellowship (SURF) Symposium

Over the past few decades, super absorbent polymers (SAPs) have been the topic of research projects all around the world due to their incredible ability to absorb water. They have applications in everything from disposable diapers to high performance concrete. In concrete, aqueous cations permeate the polymer network, reducing swelling and altering properties. One of these ions, aluminum, alters SAP properties by creating a stiff outer shell and greatly reducing absorbency, but these effects have not been well characterized. One method of characterizing the effects of aluminum on SAP hydrogels was performing gravimetric swelling tests to determine equilibrium water capacity …

Experimental Study Of Breakage Of Particles Under Compression, Haoze Zhou, Niranjan Parab, Weinong W. Chen

The Summer Undergraduate Research Fellowship (SURF) Symposium

Granular materials are used widely and can be seen in natural and industrial applications such as sand bags or pharmaceutical pills. During their manufacturing, processing, transport and use, granular materials are subjected to various kinds of loadings. If the amplitude of the loading is above the strength threshold, particles constituting granular materials may fracture. It is very important to understand the failure of particles under these loading conditions to prevent or control their failure during all stages of their manufacturing and use. Better characterization of the fracture behavior of particles composed of different materials and sizes will allow more precise …

Development Of Data Analytics Tools For Acoustic Measurement Of Positive Displacement Machines, Dan Ding, Monika Ivantysynova, Paul Kalbfleisch

The Summer Undergraduate Research Fellowship (SURF) Symposium

Noise control is an important factor in evaluating the design of positive displacement machines. This research project aims to develop new tools in MATLAB, with emphasis on visual approaches, to comprehensively characterize the noise generated by positive displacement machines in spatial, temporal and frequency domains. Sound pressure level (SPL), sound intensity level (SIL) and loudness were calculated and plotted on a measurement surface surrounding the pump, which illustrates the spatial distribution of the sound field. In order to highlight the phenomenon within specific frequency bands, Butterworth filters were used to isolate desired frequencies, such that specific harmonic content or 1/3 …

The Influence Of Thermal Conditions On The Thermomechanics Of Particulate-Composite, Mock Explosive Samples Under Near-Resonant Excitation, Jaylon B. Tucker, Allison R. Range, Jeffrey F. Rhoads

The Summer Undergraduate Research Fellowship (SURF) Symposium

Vapor detection is one of the most effective ways to find hidden plastic-bonded explosives in the field today. In recent years, it has been demonstrated that providing near-resonant vibratory excitation to explosives dramatically increases their vapor pressure, allowing for easier detection. Unfortunately, there currently exists a limited understanding of the thermomechanics of energetic material. This study seeks to help fill this technical void by exploring the thermomechanics of mock plastic-bonded explosives using direct mechanical excitation with varying thermal conditions. Using two different ambient thermal boundary conditions (insulated geometric boundaries and boundaries with free convection), a 7" by 10" by 0.5" …

Dna Bound Avicel Network: The Beginnings Of A Self-Healing Material, Emily R. Coleman, Michael R. Ladisch, Eduardo Ximenes, Marissa Karp, Kathleen Howell, Seockmo Ku, Nathan Mosier, Iman Beheshti Tabar

The Summer Undergraduate Research Fellowship (SURF) Symposium

Self-healing materials could potentially provide many improvements to engineering projects, including reduced maintenance and cost, and increased lifespan. It is desired to create a self-healing material proof of concept, which can then be altered for eventual application to the surfaces of small satellites with the goal of increasing material lifetimes. The intrinsic properties and abilities of DNA base pairing will be studied as a first test of proof of concept. The exploratory research reported in this short communication utilizes oxidation of small (50µm) particles of Avicel using TEMPO, followed by activation of Avicel particles via an EDC (1-Ethyl-3-(3-dimethylaminopropyl) carbodiimide hydrochloride) …

Using Elastin-Like Polypeptides For Better Retention Of Biofuels, Yu Hong Wang, Ethan T. Hilman, Kevin V. Solomon

The Summer Undergraduate Research Fellowship (SURF) Symposium

Elastin-like polypeptides (ELPs) are synthetic molecules that exhibit an interesting property of inverse temperature phase transition; they exist as soluble monomers at low temperatures and form insoluble aggregates at higher temperatures. The transition temperature depends on the pH, salt concentration, and the amino acid sequence of the ELP. This unique and reversible behavior, along with their high biocompatibility has made them a strategic tool for various biomedical applications. However, their hydrophobic properties also make them a prime candidate for biofuel production. As high levels of many commercially important organic solvents are toxic to the cells that make them, ELPs can …

Development Of Standard Criteria To Evaluate The Effectiveness Of Helmets At Decreasing The Risk Of Concussions, Daniel Y. Shyu, Goutham N. Sankaran, Kevin G. Mciver, Nicolas Leiva, Eric A. Nauman

The Summer Undergraduate Research Fellowship (SURF) Symposium

In many sports, such as American football, accumulations of mild traumatic brain injuries have been suggested as a possible link to neurodegeneration and future mental disorders. With head impacts occurring at all levels of competition and in different sports, it is critical to develop an accurate method for quantifying the effects of head impacts and determining the efficacy of helmets. This study examines the derivation of different dimensionless numbers and ascertains the critical factors needed to predict the effects of head impacts, specifically the resulting accelerations from an impact. Given a known force of impact, parameters such as peak translation …

Decelerating I/O Power Management, Shuang Zhai, Felix Xiaozhu Lin

The Summer Undergraduate Research Fellowship (SURF) Symposium

System suspend/resume is crucial to energy proportionality of modern computers, from wearable to cloud servers. Ironically, this OS mechanism itself is slow and energy hungry. Through characterizing the Linux kernel on a variety of modern system-on-chips (SoCs), we show the major reason as slow power state transitions of IO, which keeps CPU waiting. Furthermore, we argue that the IO wait can hardly be reduced to a satisfactory level, because most of slow transitions of IO are bounded by peripherals, low-speed buses, or physical factors. Therefore, the kernel execution for suspend/resume should be offloaded to a miniature core that waits more …

Computer Modeling Of Graphene Field Effect Transistors, Drew M. Ryan, Robert S. Bean

The Summer Undergraduate Research Fellowship (SURF) Symposium

Graphene has been the centerpiece of numerous research projects since its discovery in 2004, greatly due to its multitude of unique properties. Its variable conductivity, relative strength, and electron mobility make graphene a prime candidate for applications in the field of radiation detection. While work has been performed in the past on testing radiation detection using graphene using Graphene Field Effect Transistors (GFET), due to its limited size, fabricating GFETs can be tedious and costly. Therefore, a need arose for a way to test potential GFET designs without the cost and limitations of fabricating GFETs for each test iteration. Using …

Pt-Cu Catalysts For Catalytic Dehydrogenation Of Alkanes For Energy Production, Zixue Ma, Zhenwei Wu, Jeffrey T. Miller

The Summer Undergraduate Research Fellowship (SURF) Symposium

More active, selective and stable catalysts are in demand to increase the yields of olefins production from light alkane dehydrogenation. Cu was reported to promote Pt catalysts and Pt-Cu catalysts has been shown to achieve increased olefin selectivity and decreased deactivation rate. Pt-Cu catalysts with different Pt:Cu molar ratios may have different crystal structure and performance. This study seeks to understand of the promotion effect of Cu on Pt alkane dehydrogenation catalysts. Four different Pt-Cu catalysts with different atomic ratios were prepared and tested for propane dehydrogenation at 550℃. Synchrotron in situ X-ray diffraction and X-ray absorption spectroscopy are used …

Stimuli Responsive Fluidics Controls On A Paper-Based Bacterial Detection Platform, Siyu Zhao, Elizabeth Phillips, Jacqueline Linnes

The Summer Undergraduate Research Fellowship (SURF) Symposium

Infectious diseases are the leading causes of death around the world. Point-of-care devices using nucleic acid amplification are sensitive enough to diagnose these diseases, however, often require complex and time-intensive sample preparation steps that are not integrated with the detection process. A rapid, sensitive, and integrated sample-to-result diagnostic device will permit disease treatment planning at the point-of-care. Paper-based detection assays are a promising platform to integrate the sample preparation and detection, with minimal infrastructure, equipment, and user involvement. To integrate sample preparation with detection on paper-based assays, timing and delivery of sample fluid flow needs to be controlled. Here we …

Dislocation Engineering In Novel Nanowire Structures, Christopher Y. Chow, Samuel T. Reeve, Alejandro Strachan

The Summer Undergraduate Research Fellowship (SURF) Symposium

Leveraging defects is a cornerstone of materials science, and has become increasingly important from bulk to nanostructured materials. We use molecular dynamics simulations to explore the limits of defect engineering by harnessing individual dislocations in nanoscale metallic specimens and utilizing their intrinsic behavior for application in mechanical dampening. We study arrow-shaped, single crystal copper nanowires designed to trap and control the dynamics of dislocations under uniaxial loading. We characterize how nanowire cross-section and stacking-fault energy of the material affects the ability to trap partial or full dislocations. Cyclic loading simulations show that the periodic motion of the dislocations leads to …

Fluence Dependent Surface Modification On Tungsten Coatings Using Low Energy Helium Ion Irradiation At Elevated Temperatures, Cheng Ji, Jitendra K. Tripathi, Theodore J. Novakowski, Valeryi Sizyuk, Ahmed Hassanein

The Summer Undergraduate Research Fellowship (SURF) Symposium

Nuclear fusion is the most promising renewable energy source for the near future. It can provide a large amount of energy using a very small amount of fuel, as compared with that of the coal, oil, or nuclear fission. The chain reaction in nuclear fusion produces the energy and fuel, from hydrogen isotopes available in see water. Tungsten (W) is a leading candidate material for the plasma-facing component (PFC) in nuclear fusion reactors such as ITER (international thermonuclear experimental reactor), because of its high melting point, high yield strength, low erosion and low hydrogen isotope retention. Recent studies showed deeply …