Engineering Commons^™

Design And Prototyping Of An Adjustable Putter, Daulton Morgan

Industrial and Manufacturing Engineering

Being able to demo a golf putter is essential for a golfer since the feel of the putter is critical in determining what suits the golfer best. Due to the market being primarily dominated by right-handed players, it is difficult for left-handed players to demo high quality putters since the selection is sparse.

This report is about designing and integrating an interchangeable fastening system that allows a putter to be altered between a right and left-handed orientation, while still maintaining the traditional look of a putter. The report covers the necessary design steps, the prototyping of the putter, the projected …

The Peec Experiment: Native Hawaiian And Native American Engineering Education, Suzette R. Burckhard, Joanita M. Kant

Civil and Environmental Engineering Faculty Books

PART I: Context
1. Engineering for Native nations: Origins and goals of the Pre-Engineering Education Collaboratives (PEECs)
PART II: Culture matters
2. Recognizing history: Indigeneity matters
3. Moving beyond cultural sensitivity: Developing culturally responsive programs for and with Native engineers
4. Invoking cultural relevance at tribal colleges: Grandmother’s way is important
5. Discovering what works: STEM pedagogy and curriculum development for Native Americans
6. Exploring indigenous science and engineering: Projects with indigenous roots
PART III: Providing support for Natives in Engineering
7. Finding an Engineering identity: A Native American PEEC leader’s experience
8. Outreaching to K-12 and tribal schools in …

Sustainable Temporary Housing: Global Trends And Outlook, Daniel V. Perrucci, Bianca A. Vazquez, Can B. Aktas

Civil Engineering Faculty Publications

The concept of sustainable housing can take many forms or definitions. The view embraced in this study for sustainable housing was a structure that is low-cost, energy efficient, and one that uses local renewable or recycled materials, while at the same time being safe and providing shelter to its occupants from the elements. Rather than focus on a few aspects of housing in isolation from spatial necessities or occupant demographics, the approach used in this study was to seek best practices for sustainable temporary housing that also accounts for local climatic conditions. The global need for temporary housing may be …

Dermal Uptake Directly From Air Under Transient Conditions: Advances In Modeling And Comparisons With Experimental Results For Human Subjects, G. C. Morrison, C. J. Weschler, G. Bekö

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

To better understand the dermal exposure pathway, we enhance an existing mechanistic model of transdermal uptake by including skin surface lipids (SSL) and consider the impact of clothing. Addition of SSL increases the overall resistance to uptake of SVOCs from air but also allows for rapid transfer of SVOCs to sinks like clothing or clean air. We test the model by simulating di-ethyl phthalate (DEP) and di-n-butyl phthalate (DnBP) exposures of six bare-skinned (Weschler et al. 2015, Environ. Health Perspect., 123, 928) and one clothed participant (Morrison et al. 2016, J. Expo. Sci. Environ. Epidemiol., 26, 113). The model predicts …

Development Of Breast Tissue Phantoms For Enhanced Terahertz Imaging Utilizing Microdiamond And Nano-Onion Particles, Alec Walter

Electrical Engineering Undergraduate Honors Theses

This thesis presents the work performed to develop tissue phantoms and a contrast agent that will be used in future research of terahertz time-domain imaging of breast tumor margins. Since an excised breast tumor can contain healthy fibrous and fatty tissues along with invasive ductal carcinoma (IDC), three phantom materials were developed. Solid phantom materials were made by using TX151 to solidify water in order to tune the refractive index and absorption coefficient of the fibrous tissue phantom and IDC phantom to the properties of freshly excised breast tissue. Various amounts of olive oil were added to the water prior …

Wave Propagation And Imaging In Structured Optical Media, Zun Huang

Open Access Dissertations

Structured optical media, usually characterized by periodic patterns of inhomogeneities in bulk materials, provide a new approach to ultimate control of wave propagation with possible practical applications: from distributed feedback lasers by diffraction gratings, to highly nonlinear performance for super-continuum generation, to fiber-optic telecommunications by microstructured photonic crystal fibers, to invisibility cloaking, to super-resolution imaging with metamaterials etc.

In particular, structured optical media allow to manipulate the wave propagation and dispersion. In this thesis, we focus on engineering the propagation phase dispersion by modulating the compositions and dimensions of the periodic elements. By tailoring the dispersion in momentum space, we …

Ole Miss Engineer 2016-2017

Ole Miss Engineer

No abstract provided.

Resource-Efficient Technology To Produce 4-Aminodiphenylamine, V.V. Bochkarev, L.S. Soroka, J.K. Bashkin

Chemistry & Biochemistry Faculty Works

No abstract provided.

Power System Distributed Dynamic State Prediction, Md Ashfaqur Rahman, Ganesh Kumar Venayagamoorthy

Publications

The security of the power system can be enhanced with the prediction of the dynamic state variables. To increase the security, a distributed predictor is developed based on the Elman Recurrent Neural Network (ERNN) in this study. To develop a scalable distributed predictor, the whole network is divided in a number of ERNNs. They take the current and the previous actual states from its own and its neighbors to predict the near future values of the states. The concept is inspired from the Cellular Computational Network (CCN) framework. Each ERNN is a cell in the CCN framework. Through simulation, the …

Creating Tomorrow - Engineering Stories Heard On Utah Public Radio | College Of Engineering, Usu College Of Engineering

College of Engineering News

Changing the Conversation

Our perception of who engineers are and what they do is a little skewed. And now, engineers are trying to change that.

A Validated Software Application To Measure Fiber Organization In Soft Tissue, Erica E. Morrill, Azamat N. Tulepbergenov, Christina J. Stender, Roshani Lamichhane, Raquel J. Brown, Trevor J. Lujan

Mechanical and Biomedical Engineering Faculty Publications and Presentations

The mechanical behavior of soft connective tissue is governed by a dense network of fibrillar proteins in the extracellular matrix. Characterization of this fibrous network requires the accurate extraction of descriptive structural parameters from imaging data, including fiber dispersion and mean fiber orientation. Common methods to quantify fiber parameters include fast Fourier transforms (FFT) and structure tensors, however, information is limited on the accuracy of these methods. In this study, we compared these two methods using test images of fiber networks with varying topology. The FFT method with a band-pass filter was the most accurate, with an error of 0.71 …

Influence Of Concrete Compressive Strength On Transfer And Development Lengths Of Prestressed Concrete, Alberto Teodoro Ramirez-Garcia

Graduate Theses and Dissertations

This research examines the relationship between concrete compressive strength and strand bond. The goal of this research was to develop an equation that relates strand bond to concrete compressive strength at strand release (approximately 1 day of age) and at 28 days of age, and those equations are presented in this investigation. Strand bond is assessed by measuring the transfer length and development length for prestressed beams cast in the laboratory. In the U.S., strand bond is predicted using transfer length and development length equations provided by the American Concrete Institute (ACI-318) Building Code and American Association of State and …

Selective Resistive Sintering: A Novel Additive Manufacturing Process, Austin Bryan Van Horn

Graduate Theses and Dissertations

Selective laser sintering (SLS) is one of the most popular 3D printing methods that uses a laser to pattern energy and selectively sinter powder particles to build 3D geometries. However, this printing method is plagued by slow printing speeds, high power consumption, difficulty to scale, and high overhead expense. In this research, a new 3D printing method is proposed to overcome these limitations of SLS. Instead of using a laser to pattern energy, this new method, termed selective resistive sintering (SRS), uses an array of microheaters to pattern heat for selectively sintering materials. Using microheaters offers significant power savings, significantly …

Soil Moduli Obtained From A Back Pressure Constant Rate Of Strain Bender Element Consolidation Apparatus, Yi Zhao

Graduate Theses and Dissertations

A back-pressure saturated, constant-rate-of-strain consolidation device was modified to incorporate bender elements (BP-CRS-BE) and thus allowed for shear wave measurements during consolidation tests. This newly fabricated system has many advantages over other previous or current devices: 1) it can be utilized not only for laboratory prepared soil samples but also for field sampled soils such as Shelby tube samples, and 2) continuous compression curves, and continuous values of vertical hydraulic conductivity and coefficient of consolidation can be acquired with a significant reduction in testing time. Soil modulus values such as shear modulus and constrained modulus are also able to be …

Identifying Damage, Predicting Expansion, And Determining The Effectiveness Of Sealers On Concrete Affected By Alkali-Silica Reaction And Freeze-Thaw, Matthew Caleb Waidner

Graduate Theses and Dissertations

Premature cracking of the barrier wall and pavement on I-49 south of Fayetteville, Arkansas due to a combination of Alkali-Silica Reaction (ASR) and freeze-thaw has led to ASR and freeze-thaw research at the University of Arkansas. Potential for further expansion (PFET), Damage Rating Index (DRI), and mitigation of freeze-thaw and ASR with sealers testing and results are contained herein. PFET results indicated that the pavement will not continue to expand from ASR. With other interstate pavements deteriorating prematurely throughout Arkansas, DRI has shown that most are damaged not only by ASR but by freeze-thaw too. Recommendations for freeze-thaw’s inclusion into …

Secondary Instabilities Of Hypersonic Stationary Crossflow Waves, Joshua Benjamin Edelman

Open Access Theses

A sharp, circular 7° half-angle cone was tested in the Boeing/AFOSR Mach-6 Quiet Tunnel at 6° angle of attack. Using a variety of roughness configurations, measurements were made using temperature-sensitive paint (TSP) and fast pressure sensors. High-frequency secondary instabilities of the stationary crossflow waves were detected near the aft end of the cone, from 110° to 163° from the windward ray.

At least two frequency bands of the secondary instabilities were measured. The secondary instabilities have high coherence between upstream and downstream sensor pairs. In addition, the amplitudes of the instabilities increase with the addition of roughness elements near the …

A High-Performance Communication Topology For Decentralized Protocols, Raza A. Khan

Open Access Theses

Preserving transaction atomicity and ensuring its commitment is key to the maintenance of data integrity in a distributed database. The distributed consensus protocol is a prominent example of a mechanism used to accomplish safe commitment of a distributed transaction. These protocols are based primarily on repeated message exchange among all sites/nodes and their performance is characterized not only by the number of these messages but also by the underlying communication topology. This thesis proposes a measure of performance known as average message complexity and proposes a communication structure based on folded even graphs called the Folded Even Network (FEN). Performance …

Implementing A Wireless Monitoring Solution For A Biomechanical Telemetry System, Hyung Suk Kim

Open Access Theses

Sport-related Traumatic Brain Injury (TBI) is one of the major concerns for collision based sports athletes and their families. The ability to measure impacts on the head is imperative to monitor brain injury and prevent serious TBI. Recent research by the Purdue Neurotrauma Group (PNG) indicates that accumulation of subconcussive impacts may cause permanent neurological damage. Currently available commercial impact monitoring systems are designed as an event-based models which collect impact data above pre-determined acceleration thresholds. To track long-term effects of sub-concussive impacts, event-based modeling is inadequate. The PNG developed a biomechanical sports telemetry system that is capable of storing …

Impact Of Rfid Information-Sharing Coordination Over A Supply Chain With Reverse Logistics, Juan Jose Nativi Nicolau

Open Access Dissertations

Companies have adopted environmental practices such as reverse logistics over the past few decades. However, studies show that aligning partners inside the green supply chain can be a substantial problem. This lack of coordination can increase overall supply chain cost. Information technology such as Radio Frequency Identification (RFID) has the potential to enable decentralized supply chain coordinate their information. Even though there are research that address RFID on traditional supply chain, few researches address how to coordinate RFID information sharing in a green supply chain. We study, through simulation experiments, two types of RFID information-sharing coordination under different configurations related …

Shear Wave Velocity And Its Anisotropy Of Polymer Modified High-Volume Class-F Fly Ash-Kaolinite Mixtures, X. Kang, B. Bate

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This study investigated the effects of polymers on the small-strain stiffness behavior of high-volume Class-F fly ash-kaolinite mixtures. The shear wave velocity (Vs) and its anisotropy of organically modified fly ash-kaolinite mixtures were evaluated using a self-developed floating wall type consolidometer bender element (BE) testing system. Both synthetic polymers [polyethylene oxide (PEO)] and biopolymers (xanthan gum and chitosan) were used to modify the stiffness of fly ash-kaolinite mixtures. Shear waves generated and received by bender elements were measured to quantify the small-strain stiffness of the organically modified fly ash-kaolinite mixtures in three orthogonal directions, i.e., vh, hv, and hh. The …

The Eco-Smart Can, Darack B. Nanto

Undergraduate Honors Theses

I noticed that maintenance workers had the same itinerary when emptying trashcans, meanwhile some trashcans needed to be emptied urgently. Traditionally, ETSU maintenance operate on daily routes to pick trash on designated time, regardless the level of the containers. The time, resources and labor invested in collecting the trash could be saved. Therefore, I decided to use the Internet of Things (IoT) to create a device that will optimize trash collection, to reduce costs and pollution.

Feature Selection Using An Extended Piecewise Linear Orthonormal Floating Search, Rohit Rawat

Electrical Engineering Dissertations - Archive

The piecewise linear orthonormal floating search (PLOFS) is a wrapper method for feature selection that uses a piecewise linear network (PLN) to evaluate candidate subsets. PLOFS has difficulty working on high dimensional data due to overfitting and poor clustering in the PLN subset evaluation function (SEF), and high computational complexity. The presence of noise features aggravates these problems. In order to improve upon the SEF used by PLOFS we mapped the PLN to a SPLN. Then a second order embedded feature selection was used to generate improved distance measure weights. Next, a second order method for positioning center vectors was …

The Influence Of The Interaction Of Carbon Based Materials With Ionic Liquid On The Tribological Performance Of Lubricating Grease And Oil, Kimaya Vyavhare

Material Science and Engineering Theses - Archive

Stringent government regulation on environment emissions and demand to develop energy efficient and durable modern mechanical systems has imposed a significant challenge on the lubricant additive manufacturer to develop environment friendly and high performance additives for the lubricating medias like oil and grease. The current industrial additive technology is dominated by phosphorus and sulfur containing the liquid antiwear additive, Zinc dialkyl dithiophosphate and extreme pressure solid additives like Graphite, Molybdenum disulfide. This current additive package possesses harm to the environment and has already met performance limit for applications working under severe operating condition. A proposed solution to combat with this …

Towards Artificial Proprioception In The Mandibular Full Arch Fixed Implant Prosthesis, Md Abu Hasan

Mechanical and Aerospace Engineering Dissertations - Archive

Full arch fixed implant prosthesis has been one of the most effective treatment modalities for fully edentulous patients over the last few decades. However, due to lack of proprioception occlusal overload is experienced by the prosthesis and its components causing major biomechanical complications such as screw/abutment fracture, framework fracture, and bone loss. The currently available approaches for the overload management rely on external appliances such as an occlusal splint or bite guard and result in occlusal discomfort and high patient dissatisfaction. In this research, an approach to induce artificial proprioception in the full arch fixed implant prosthesis is proposed. However, …

A Novel Approach For Fabrication Of Single Silicon/Silicon Oxide Nanopillars At Precise Locations, Sravan Chowdary Talasila

Material Science and Engineering Theses - Archive

Nanopillars exhibit novel electrical and optical properties which could not be obtained from bulk materials. Many of their practical applications would require controlled placement of nanopillars at exact locations. However, precise placement and large scale fabrication of nanopillars have been challenging with conventional fabrication techniques. This thesis investigates a new approach to fabricate nanopillars at exact locations on a large scale. In this approach, fabrication of nanopillars is accomplished by first placing nanoparticles (NP) at exact locations and then performing anisotropic dry etching using these NPs as hard masks, resulting in formation of nanopillars on exact substrate positions. Precise placement …

A Framework For Employing Femtosatellites In Planetary Science Missions, Including A Proposed Mission Concept For Titan, Tracie Renea Conn Perez

Mechanical and Aerospace Engineering Dissertations - Archive

Over the past 15 years, there has been a growing interest in femtosatellites, a class of tiny satellites having mass less than 100 grams. Research groups from Peru, Spain, England, Canada, and the United States have proposed femtosat designs and novel mission concepts for them. In fact, Peru made history in 2013 by releasing the first – and still only – femtosat tracked from LEO. However, femtosatellite applications in interplanetary missions have yet to be explored in detail. An interesting operations concept would be for a space probe to release numerous femtosatellites into orbit around a planetary object of interest, …

Pilot Demonstration Based Reinforcement Learning With Application To Low Speed Airship Control, Onur Daskiran

Mechanical and Aerospace Engineering Dissertations - Archive

Designing control systems for airship has unique challenges as compared to conventional aircraft. Highly nonlinear dynamics, different mass/inertia relations, vast uncertainties in the model parameters and underactuation are the main reasons behind this. Airship dynamics is greatly influenced by the variations in the environmental (e.g.,room temperature) and internal (e.g., helium distribution in envelope) factors that can completely change the response characteristics of the blimp and make it infeasible for a model-based controller to perform. On the other hand, a skilled RC pilot can operate the manual flight easily under these conditions. This makes LfD (learning from demonstration) and RL (reinforcement …

A Stochastic Distributed Control Allocation Method Using Probability Collectives, Christopher Michael Elliot

Mechanical and Aerospace Engineering Dissertations - Archive

The configuration of the aerospace vehicle of tomorrow marches forward in complexity in step with technological advances in computation, materials, propulsion, and beyond. One of many attributes resulting from this evolution is the multiple effector concept, replacing the traditional aircraft design approach of a dedicated four channel mixer where pitch-roll-yaw-speed is controlled by elevator-aileron-rudder-engine, respectively. Instead, for example on the propulsion front, a distributed suite of smaller engines can substitute the larger power plant and can be used in concert for multiple axis control with both simultaneous, collective thrust for force generation and differential cyclic thrust for moment generation. The …

System Health Monitoring Using Multiple-Model Adaptive Estimation Techniques, Stanley Ryan Sifford

Mechanical and Aerospace Engineering Dissertations - Archive

Monitoring system health for fault detection and diagnosis by tracking system parameters concurrently with state estimates is approached using a new multiple-model adaptive estimation (MMAE) method. This novel method is called GRid-based Adaptive Parameter Estimation (GRAPE). GRAPE expands existing MMAE methods by using new techniques to sample the parameter space. GRAPE expands on MMAE with the hypothesis that sample models can be applied and resampled without relying on a predefined set of models. GRAPE is initially implemented in a linear framework using Kalman filter models. A more generalized GRAPE formulation is presented using extended Kalman filter (EKF) models to represent …

Numerical Modeling Of Capillary Driven Microfluidic Flow, Md Ashraful Islam

Mechanical and Aerospace Engineering Dissertations - Archive

Capillary driven two dimensional axisymmetric and three dimensional asymmetric flow in various microfluidic applications have been modeled and analyzed numerically. The transient Navier-Stokes equations are solved using a finite-difference formulation with a two-step projection method on a fixed grid. The vapor-liquid interface of the micro-droplet is tracked by volume-of-fluid (VOF) and coupled level set and volume-of-fluid (CLSVOF) methods with the surface tension force determined by the continuum surface force (CSF) model. The static contact angle at the three phase contact line has been modeled using wall adhesion scheme within the CSF framework. The developed numerical method for capturing the microfluidic …