Engineering Commons^™

Improved Harmonic Suppression Efficiency Of Single-Phase Apfs In Distorted Distribution Systems, Samet Biricik, Soydan Redif, Shafiuzzaman Khadem, Malabika Basu

Articles

In this study, a control method is proposed to improve the harmonic suppression efficiency of the single phase active power filter in a distorted power system to suppress current harmonics and reactive power. The proposed method uses the self-tuning filter (STF) algorithm to process single phase grid voltage in order to provide a uniform reference grid current, which increases the efficiency of the system. The results of the simulation study are presented to verify the effectiveness of the proposed control technique in this study.

Autonomous Small Scale Data-Logger For Temperature Mapping, Ahmed Gamal Eldin Tawfik

UNF Graduate Theses and Dissertations

Modern manufacturing processes require minimal human intervention and a high degree of automation to meet industry demands. Due to variability in industrial process conditions, custom systems are often sought for these applications. These systems must be compact, economical, and capable of operating under different environmental conditions. This work presents the development, fabrication, testing, and validation of a low cost small scale temperature data-logger used as a monitoring system for automated applications. The proposed system is battery powered and packaged in a manner able to operate in temperatures up to 100^oC, with exposure to chemicals such as Isopropyl Alcohol, …

Comparison Of Hydrologic Model Performance Statistics Using Thiessen Polygon Rain Gauge And Nexrad Precipitation Input Methods At Different Watershed Spatial Scales And Rainfall Return Frequencies, Amanda E. Tancreto

UNF Graduate Theses and Dissertations

As hydrological computer modeling software continues to increase in complexity, the need for further understanding of the value of different model input datasets becomes apparent. Frequently used precipitation model input include rain gauge data and next-generation radar–based (NEXRAD) rainfall data. Rain gauge data are usually interpolated across a model domain using various methods including the Thiessen Polygon methodology, which may be data-sparse in some areas and overly data-dense in others. However, rain gauge data are generally very easy to use in hydrologic model development, often requiring little to no data processing. NEXRAD data have the potential to improve hydrologic runoff …

Structural Simulations And Conservation Analysis: Historic Building Information Model (Hbim), Conor Dore Dr., Maurice Murphy, S. Mccarthy, F. Brechin, C. Cassidy, E. Dirix

Conference papers

In this paper the current findings to date of the Historic Building Information Model (HBIM) of the Four Courts in Dublin are presented. The Historic Building Information Model (HBIM) forms the basis for both structural and conservation analysis to measure the impact of war damage which still impacts on the building. The laser scan survey was carried out in the summer of 2014 of the internal and external structure. After registration and processing of the laser scan survey, the HBIM was created of the damaged section of the building and is presented as two separate workflows in this paper. The …

Student Chapter Outreach Events And Student Involvement, Daniel Marchese, Emily Miller, Yeonsu Ryu, Alyssa Ross, Leroy L. Long Iii

Publications

The American Society for Engineering Education (ASEE) Student Chapter at The Ohio State University (OSU) is unique from other ASEE student organizations. Traditionally, ASEE chapters are not outreach-focused organizations. However, the OSU Chapter has placed a core focus on community involvement. Over time, the group has participated in numerous outreach events focused on increasing student knowledge of and interest in engineering. These outreach events have provided students with exposure to the field of engineering. They have also had several effects on the structure and focus of the OSU ASEE Student Chapter. Over the past year, the layout of our Executive …

Black Male "Buoyant Believers" In Engineering And Engineering-Related Fields, Leroy L. Long Iii, Joseph Allen Kitchen, Trevion S. Henderson

Publications

Strategies for improving student success are particularly important in high-demand fields like science, technology, engineering, and math (STEM). As the U.S. experiences a decline in skilled STEM workers and a growing number of racial/ethnic minorities, it is critical that more attention be paid to the college success of underrepresented populations majoring in STEM. While some strategies for increasing STEM student success have focused on social-psychological factors such as academic self-efficacy and resilience, little attention has been given to these factors among specific minority groups in STEM such as Black men. To extend the current literature, interviews with 27 Black male …

Comparison Of Lock-In And Pulse-Phase Thermography For Defect Characterization In Frp Composites Applied To Concrete, Jeff Brown, Sai Harsha Chittineni

Publications

Thermal imaging is a well-established technique for the non-destructive evaluation of FRP composites applied to reinforced concrete. Defect characterization using IR thermography, however, remains a topic of on-going research, and there are currently no universally accepted standards for data collection or interpretation. This research involved large scale thermography inspection of two FRP strengthened bridge girders that were removed from service after approximately 10 years of service in a potentially corrosive marine environment. Trial inspections were performed on test areas where defects could be identified using sounding methods. Two procedures showed the most promise for identifying and characterizing defects: sinusoidal (lock-in …

Editorial: Special Issue: Safety & Efficiency Of Civil Aviation: Selected Papers From The World Conferences Of The Air Transport Research Society And The World Conference On Transport Society - 2013, Paul Hooper, Ian Douglas, Chunyan Yu, Stefano Paleari

Publications

The Air Transport Research Society (ATRS) is a Special Interest Group (SIG) of the World Conference on Transport Research Society (WCTRS). The ATRS annual World Conference was held at the University of Bergamo, Bergamo, Italy on 26-29 June 2013 and it attracted 266 papers from 37 countries. Also, the WCTRS triennial World Conference was held on 15- 18 July at Rio de Janeiro, Brazil, during which the ATRS organised several sessions devoted to air transport topics. This special issue of the Journal of Air Transport Studies has drawn upon all of this material to present four papers that promote improvements …

A Trustworthiness Of Commercial Airline Pilots (T-Cap) Scale For American Consumers, Stephen C. Rice, Rian Mehta, Scott Winter, Korhan Oyman

Publications

The purpose of this study was to create a Trustworthiness of Commercial Airline Pilots (T-CAP) scale that could be used with American participants. Previous research (Rice, Mehta, Steelman, & Winter, 2014) created a similar scale that may be used with Indian participants. However, due to cultural differences, it was necessary to recreate an instrument that could be used with American consumers. In fact, the scale developed by American participants did differ significantly, both in terms of length and items to measure trustworthiness of commercial pilots. Participants were used in the entire process of creating the scale, including item generation and …

Photonic Crystal Fibre Wgm Resonators For Magnetic Field Sensing, Aseel Mahmood, Vishnu Kavungal, Yuliya Semenova, S. S. Ahmed

Conference Papers

Whispering gallery mode (WGM) micro-resonators are remarkable optical devices whose small modevolumes and high Q-factors make them attractive for a wide range of applications such as filters, lasers, modulators and sensors [1]. WGMs can be excited in dielectric structures with circular symmetry, such as microspheres, micro-disks, and optical fibres, and can be imagined as closed-trajectory rays confined within the cavity by almost total reflections from the curved surface of the resonator. The spectral positions of the WGM resonances are highly sensitive to the geometrical dimensions of the resonator and refractive indices of both the resonator itself and its surrounding medium …

Human Factors Engineering In System Design: A Roadmap For Improvement, Maria Chiara Leva, Farzad Naghdali, Costanza Ciarapica Alunni

Conference Papers

This paper summarises current industrial practices and standards promoting Human Factors Engineering (HFE) at design stage and revise them with an action research approached based on the concrete case studies performed during a European project called TOSCA. The paper highlights how HFE can significantly impact the costs and risk associated with a plant lifecycle and the current gaps and issues encountered. The gaps identified are used to guide industrial practices and standards towards a more valuable inclusion of Human Factors knowledge in structured system design processes to support human performance and reduce the potential for human errors in operations and …

Human Factors Engineering At Design Projects For Process Industry - Challenges And Lessons Learned, Maria Chiara Leva, Farzad Naghdali

Conference Papers

This paper summarises current industrial practices and standards promoting Human Factors Engineering (HFE) at design stage and revise them with an action research approached based on the concrete case studies performed during a European project called TOSCA. The paper highlights how HFE can significantly impact the costs and risk associated with a plant lifecycle and the current gaps and issues encountered. The gaps identified are used to guide industrial practices and standards towards a more valuable inclusion of Human Factors knowledge in structured system design processes to support human performance and reduce the potential for human errors in operations and …

In Vivo Detection Of Hyperoxia-Induced Pulmonary Endothelial Cell Death Using 99mTc-Duramycin, Said H. Audi, Elizabeth R. Jacobs, Ming Zhao, David L. Roerig, Steven T. Haworth, Anne V. Clough

Biomedical Engineering Faculty Research and Publications

Introduction

^99mTc-duramycin, DU, is a SPECT biomarker of tissue injury identifying cell death. The objective of this study is to investigate the potential of DU imaging to quantify capillary endothelial cell death in rat lung injury resulting from hyperoxia exposure as a model of acute lung injury.

Methods

Rats were exposed to room air (normoxic) or > 98% O₂ for 48 or 60 hours. DU was injected i.v. in anesthetized rats, scintigraphy images were acquired at steady-state, and lung DU uptake was quantified from the images. Post-mortem, the lungs were removed for histological studies. Sequential lung sections were immunostained …

Evaluation Of Pediatric Manual Wheelchair Mobility Using Advanced Biomechanical Methods, Brooke A. Slavens, Alyssa J. Schnorenberg, Christine M. Aurit, Adam Graf, Joseph J. Krzak, Kathryn Reiners, Lawrence C. Vogel, Gerald F. Harris

Biomedical Engineering Faculty Research and Publications

There is minimal research of upper extremity joint dynamics during pediatric wheelchair mobility despite the large number of children using manual wheelchairs. Special concern arises with the pediatric population, particularly in regard to the longer duration of wheelchair use, joint integrity, participation and community integration, and transitional care into adulthood. This study seeks to provide evaluation methods for characterizing the biomechanics of wheelchair use by children with spinal cord injury (SCI). Twelve subjects with SCI underwent motion analysis while they propelled their wheelchair at a self-selected speed and propulsion pattern. Upper extremity joint kinematics, forces, and moments were computed using …

Robust, Low Power, Discrete Gate Sizing, Anthony Joseph Casagrande

USF Tampa Graduate Theses and Dissertations

Ultra-deep submicron circuits require accurate modeling of gate delay in order to meetaggressive timing constraints. With the lack of statistical data, variability due to the mechanical manufacturing process and its chemical properties poses a challenging problem. Discrete gate sizing requires (i) accurate models that take into account random parametric variation and (ii) a fair allocation of resources to optimize the solution. The proposed GTFUZZ gate sizing algorithm handles both tasks. Gate sizing is modeled as a resource allocation problem using fuzzy game theory. Delay is modeled as a constraint and power is optimized in this algorithm. In GTFUZZ, delay is …

Self-Assembly Kinetics Of Microscale Components: A Parametric Evaluation, Jose Miguel Carballo

USF Tampa Graduate Theses and Dissertations

The goal of the present work is to develop, and evaluate a parametric model of a basic microscale Self-Assembly (SA) interaction that provides scaling predictions of process rates as a function of key process variables. At the microscale, assembly by “grasp and release” is generally challenging. Recent research efforts have proposed adapting nanoscale self-assembly (SA) processes to the microscale. SA offers the potential for reduced equipment cost and increased throughput by harnessing attractive forces (most commonly, capillary) to spontaneously assemble components. However, there are challenges for implementing microscale SA as a commercial process. The existing lack of design tools prevents …

Laboratory Evaluation Of Organic Soil Mixing, Spencer Dean Baker

USF Tampa Graduate Theses and Dissertations

Organic soils present a difficult challenge for roadway designers and construction due to the high compressibility of the soil structure, the often associated high water table, and the high moisture content. For other soft or loose soils (inorganic soils), stabilization via cement or similar binders (a method called soil mixing) has proven to be an effective solution. To this end, the Federal Highway Administration has published a comprehensive design manual for these techniques. Organic soils, however, are not addressed therein to a level of confidence for design, as organic soils do not follow the trends of inorganic soils. This has …

A Numerical And Experimental Investigation Of Flow Induced Noise In Hydraulic Counterbalance Valves, Mutasim Mohamed Elsheikh

USF Tampa Graduate Theses and Dissertations

The main objective of this study is to explore the complex fluid flow phenomena that result in the generation of a high frequency noise in counterbalance valves through an experimental and numerical investigation of the flow. Once the influence of the different components involved in noise generation is established, a secondary objective is the introduction of design modifications that eliminate the undesired effect without altering the operation envelope or the performance of the valve.

A hydraulic test bench was used to carry out an experimental investigation of the noise generation process. A computer based data acquisition system was used to …

Use Of Anaerobic Adhesive For Prevailing Torque Locking Feature On Threaded Product, Alan Hernandez

USF Tampa Graduate Theses and Dissertations

The purpose of this research is to determine if anaerobic adhesive can be used as a prevailing torque locking feature. Maintaining preload in critical joints is the usual standard that anaerobic adhesives are held to in aerospace and other industry. To test if anaerobic adhesive can be used as a prevailing torque locking feature a test procedure was developed and implemented to measure the removal torque of threaded fasteners after an allotted cure time. In total, 191 threaded fasteners of different material and coatings were tested in the unseated and seated states with various strengths and varieties of anaerobic adhesive. …

A Planar Pseudo-Rigid-Body Model For Cantilevers Experiencing Combined Endpoint Forces And Uniformly Distributed Loads Acting In Parallel, Philip James Logan

USF Tampa Graduate Theses and Dissertations

This dissertation describes the development and effectiveness of a mathematical model used to predict the behavior of cantilever beams whose loading conditions include parallel combinations of evenly distributed loads and endpoint forces. The large deflection of cantilever beams has been widely studied. A number of models and mathematical techniques have been utilized in predicting the endpoint path coordinates and load-deflection relationships of such beams. The Pseudo-Rigid-Body Model (PRBM) is one such method which replaces the elastic beam with rigid links of a parameterized pivot location and torsional spring stiffness. In this paper, the PRBM method is extended to include cases …

Effects Of Solids Retention Time And Feeding Frequency On Performance And Pathogen Fate In Semi-Continuous Mesophilic Anaerobic Digesters, Nathan Daniel Manser

USF Tampa Graduate Theses and Dissertations

Anaerobic digestion is a biochemical process in which organic carbon is biodegraded in an oxygen free environment through a microbial consortium. Engineered biological systems used for resource recovery often utilize anaerobic digestion to treat anthropogenic organic wastes by reclaiming the carbon as energy (methane gas) and a soil amendment (biosolids). Small-scale, or household, semi-continuous anaerobic digesters have been used in developed and developing countries for many decades to produce biogas from human and livestock waste, which is used for heating, lighting, and cooking. This application has been shown to improve the quality of life of the user. Although there is …

Reminiscing About 15 Years Of Interoperability Efforts, Herbert Van De Sompel, Michael L. Nelson

Computer Science Faculty Publications

Over the past fifteen years, our perspective on tackling information interoperability problems for web-based scholarship has evolved significantly. In this opinion piece, we look back at three efforts that we have been involved in that aptly illustrate this evolution: OAI-PMH, OAI-ORE, and Memento. Understanding that no interoperability specification is neutral, we attempt to characterize the perspectives and technical toolkits that provided the basis for these endeavors. With that regard, we consider repository-centric and web-centric interoperability perspectives, and the use of a Linked Data or a REST/HATEAOS technology stack, respectively. We also lament the lack of interoperability across nodes that play …

The Ph Sensing Properties Of Rf Sputtered Ruo2 Thin-Film Prepared Using Different Ar/O2 Flow Ratio, Ali Sardarinejad, Devendra Kumar Maurya, Kamal Alameh

Research outputs 2014 to 2021

The influence of the Ar/O₂ gas ratio during radio frequency (RF) sputtering of the RuO₂ sensing electrode on the pH sensing performance is investigated. The developed pH sensor consists in an RF sputtered ruthenium oxide thin-film sensing electrode, in conjunction with an electroplated Ag/AgCl reference electrode. The performance and characterization of the developed pH sensors in terms of sensitivity, response time, stability, reversibility, and hysteresis are investigated. Experimental results show that the pH sensor exhibits super-Nernstian slopes in the range of 64.33-73.83 mV/pH for Ar/O₂ gas ratio between 10/0-7/3. In particular, the best pH sensing performance, in …

Tunable Optical Nanocavity Of Iron-Garnet With A Buried Metal Layer, Alexey N. Kuz'michev, Lars E. Kreilkamp, Mohammed Nur-E-Alam, Evgeni Bezus, Mikhail Vasilev, Iliya A. Akimov, Kamal Alameh, Manfred Bayer, Vladimir I. Belotelov

Research outputs 2014 to 2021

We report on the fabrication and characterization of a novel magnetophotonic structure designed as iron garnet based magneto-optical nanoresonator cavity constrained by two noble metal mirrors. Since the iron garnet layer requires annealing at high temperatures, the fabrication process can be rather challenging. Special approaches for the protection of metal layers against oxidation and morphological changes along with a special plasma-assisted polishing of the iron garnet layer surface were used to achieve a 10-fold enhancement of the Faraday rotation angle (up to 10.8°=μm) within a special resonance peak of 12 nm (FWHM) linewidth at a wavelength of 772 nm, in …

Properties Of Exchange Coupled All-Garnet Magneto-Optic Thin Film Multilayer Structures, Mohammed Nur-E-Alam, Mikhail Vasilev, Viacheslav A. Kotov, Dmitry Balabanov, Ilya Akimov, Kamal Alameh

Research outputs 2014 to 2021

The effects of exchange coupling on magnetic switching properties of all-garnet multilayer thin film structures are investigated. All-garnet structures are fabricated by sandwiching a magneto-soft material of composition type Bi_1.8Lu_1.2Fe_3.6Al_1.4O₁₂ or Bi₃Fe₅O₁₂:Dy₂O₃ in between two magneto-hard garnet material layers of composition type Bi₂Dy₁Fe₄Ga₁O₁₂ or Bi₂Dy₁Fe₄Ga₁O₁₂:Bi₁₂O₃. The fabricated RF magnetron sputtered exchange-coupled all-garnet multilayers demonstrate a very attractive combination of …

A Fast Approach For Preparation Of Adsorbent From Reed Black Liquor And Its Performance In Equilibrium And Kinetic Gas Separation, G. Yang, Yong Sun, C. Wen, J. Zhang

Research outputs 2014 to 2021

A new approach using reed pulping black liquor by hydrothermal reaction followed by fast carbonization at 350 °C in fluidized bed reactor for 5 minutes was proposed in this paper. The BET specific surface area generated at optimum conditions reached 390 m2 g–1. The CO2 selectivity over CH4 and N2 comparable to commercial activated carbons was obtained. The isosteric enthalpies of adsorption for CO2, CH4 and N2 on the resultant carbon sample prepared at optimum conditions show surface heterogeneity. The kinetic results indicate its potential for separation of carbon dioxide from carbon dioxide/methane mixture.

Superconducting Magnetic Energy Storage Unit For Damping Enhancement Of A Wind Farm Generation System, Embaiya Salih, Stefan Lachowicz, Octavian Bass, Daryoush Habibi

Research outputs 2014 to 2021

A superconducting magnetic energy storage (SMES) system containsa high inducting coil and combines with power conversion system can act as a constant source of direct current. SMES unit connected to a power system is able to absorb and store both active and reactive power from this system and to inject these powers into the power system in the demand periods. These injected powers are controlled by changing both the duty cycle of the dc-dc chopper switches and its operation modes. This paper presents an efficient design based on an SMES unit controlled by the artificial neural network (ANN) to improve …

Improving Processing By Adaption To Conditional Geostatistical Simulation Of Block Compositions, R. Tolosana-Delgado, Ute A. Mueller, K. G. Van Den Boogaart, C. Ward, J. Gutzmer

Research outputs 2014 to 2021

Exploitation of an ore deposit can be optimized by adapting the beneficiation processes to the properties of individual ore blocks. This can involve switching in and out certain treatment steps, or setting their controlling parameters. Optimizing this set of decisions requires the full conditional distribution of all relevant physical parameters and chemical attributes of the feed, including concentration of value elements and abundance of penalty elements. As a first step towards adaptive processing, the mapping of adaptive decisions is explored based on the composition, in value and penalty elements, of the selective mining units. Conditional distributions at block support are …

Fabrication Of Tissue Precursors Induced By Shape-Changing Hydrogels, Olukemi O. Akintewe

USF Tampa Graduate Theses and Dissertations

Scaffold based tissue reconstruction inherently limits regenerative capacity due to inflammatory response and limited cell migration. In contrast, scaffold-free methods promise formation of functional tissues with both reduced adverse host reactions and enhanced integration. Cell-sheet engineering is a well-known bottom-up tissue engineering approach that allows the release of intact cell sheet from a temperature responsive polymer such as poly-N-isopropylacrylamide (pNIPAAm). pNIPAAm is an ideal template for culturing cell sheets because it undergoes a sharp volume-phase transition owing to the hydrophilic and hydrophobic interaction around its lower critical solution temperature (LCST) of 32°C, a temperature close to physiological temperature. Compared to …

Experimental Investigation Of Encapsulated Phase Change Materials For Thermal Energy Storage, Tanvir E. Alam

USF Tampa Graduate Theses and Dissertations

Thermal energy storage (TES) is one of the most attractive and cost effective solutions to the intermittent generation systems like solar, wind and other renewable sources, compared to alternatives. It creates a bridge between the power supply and demand during peak hours or at times of emergency to ensure the continuous supply of energy. Among all the TES systems, latent heat thermal energy storage (LHTES) draws lots of interests as it has high energy density and can store or retrieve energy isothermally. Two major technical challenges associated with the LHTES are low thermal conductivity of the phase change materials (PCMs), …