Engineering Commons^™

Models Predicting The Performance Of Ic Component Or Pcb Channel During Electromagnetic Interference, Chunchun Sui

Doctoral Dissertations

"This dissertation is composed of three papers, which cover the prediction of the characteristics of jitter due to crosstalk and due to simultaneous switching noise, and covers susceptibility of delay locked loop (DLL) to electromagnetic interference.

In the first paper, an improved tail-fit de-convolution method is proposed for characterizing the impact of deterministic jitter in the presence of random jitter. A Wiener filter de-convolution method is also presented for extracting the characteristics of crosstalk induced jitter from measurements of total jitter made when the crosstalk sources were and were not present. The proposed techniques are shown to work well both …

Compact Deployable Antenna For Cubesat Units, Sarah Bolton, Dominic Doty, Peter Rivera

Mechanical Engineering

CubeSats are an appealing platform for space exploration due to their low build and launch costs. Due to their small size, communication rates are often severely limited, preventing missions beyond low earth orbit. A low cost, high gain, high frequency antenna is needed to extend the capabilities of CubeSats.

The goal of the project was to design and build an axisymmetric parabolic antenna that could be deployed from a 10cm x 10cm x 15cm (1.5U) volume and operate at Ka band frequencies. The design selected consisted of an expanding perimeter truss supporting a tensioned mesh reflector. The perimeter truss was …

Stored Grain Pack Factors For Wheat: Comparison Of Three Methods To Field Measurements, Josephine M. Boac, Rumela Bhadra, Mark E. Casada, Sidney A. Thompson, Aaron P. Turner, Michael D. Montross, Samuel G. Mcneill, Ronaldo G. Maghirang

Biosystems and Agricultural Engineering Faculty Publications

Storing grain in bulk storage units results in grain packing from overbearing pressure, which increases grain bulk density and storage unit capacity. This study compared pack factors of hard red winter (HRW) wheat in vertical storage bins using different methods: the existing packing model (WPACKING), the USDA Risk Management Agency (RMA) method, and the USDA Farm Service Agency Warehouse Licensing and Examination Division (FSA-W) method. Grain bins containing HRW wheat were measured in Kansas, Oklahoma, and Texas. Packing was measured in corrugated steel bins and reinforced concrete bins with diameters ranging from 4.6 to 31.9 m (15.0 to 104.6 ft) …

Control System Development And Response Analysis Of An Electronically Actuated Variable-Orifice Nozzle For Agricultural Pesticide Applications, Joe D. Luck, Scott A. Shearer, Michael P. Sama, Santosh K. Pitla

Biosystems and Agricultural Engineering Faculty Publications

The goal of this research project was to further the development of an electromechanically controlled variable-orifice nozzle by creating an electronic control system and then evaluating that system based on step and ramp inputs. The control system was developed in a programming environment that combined an electronic data acquisition system and actuator with pressure and flow sensors. A proportional, variable-gain (based on system pressure) control system was developed to adjust nozzle flow rates to meet target application rates. The constraints were to achieve settling time of less than 1.0 s, overshoot of less than 10% of maximum flow (or minimum …

An Optical Sprayer Nozzle Flow Rate Sensor, Joseph S. Dvorak, Luke E. Bryant

Biosystems and Agricultural Engineering Faculty Publications

Ensuring proper flow rates from each nozzle on an agricultural sprayer has become even more important as advances continue to be made in precision application technology. In this article, we describe the structure and testing of a sensor technology based on optical cross-correlation to determine the flow rate of individual sprayer nozzles. An advantage of this technology is that it does not require that impellers or other components be placed in the flow, which could cause plugging. The only moving part in the entire system is a solenoid used to inject a tracer dye. The objective of this study was …

Bromide Removal From Surface Waters By Silver Impregnated Activated Carbon, Chen Chen

All Theses

Bromide is a precursor of disinfection by-products (DBPs) during potable water treatment, because it causes the formation of brominated DBPs that are more cyto- and geno-toxic than their chlorinated analogues. Due to the potential health risks of DBPs, the United States Environmental Protection Agency (USEPA) has been imposing increasingly stringent regulations for controlling the DBPs. Therefore, removal of bromide ions from source waters becomes critical for controlling the DBPs formation. In my study, it was hypothesized that silver impregnated activated carbon (SIAC) can be a promising adsorbent for bromide removal from water. The main research objectives of this study were …

Angiogenic Effect Of Bioactive Borate Glass Microfibers And Beads In The Hairless Mouse, Richard J. Watters, Roger F. Brown, D. E. Day

Biological Sciences Faculty Research & Creative Works

The purpose of this project was to investigate the angiogenic mechanism of bioactive borate glass for soft tissue repair in a 'hairless' SKH1 mouse model. Subcutaneous microvascular responses to bioactive glass microfibers (45S5, 13-93B3, and 13-93B3Cu) and bioactive glass beads (13-93, 13-93B3, and 13-93B3Cu) were assessed via: noninvasive imaging of skin microvasculature; histomorphometry of microvascular densities; and quantitative PCR measurements of mRNA expression of VEGF and FGF-2 cytokines. Live imaging via dorsal skin windows showed the formation at two weeks of a halo-like structure infused with microvessels surrounding implanted borate-based 13-93B3 and 13-93B3Cu glass beads, a response not observed with …

Improving Practices In Nanomedicine Through Near Real-Time Pharmacokinetic Analysis, Isidro B. Magana

Doctoral Dissertations

More than a decade into the development of gold nanoparticles, with multiple clinical trials underway, ongoing pre-clinical research continues towards better understanding in vivo interactions. The goal is treatment optimization through improved best practices. In an effort to collect information for healthcare providers enabling informed decisions in a relevant time frame, instrumentation for real-time plasma concentration (multi-wavelength photoplethysmography) and protocols for rapid elemental analysis (energy dispersive X-Ray fluorescence) of biopsied tumor tissue have been developed in a murine model. An initial analysis, designed to demonstrate the robust nature and utility of the techniques, revealed that area under the bioavailability curve …

Control System Development And Response Analysis Of An Electronically Actuated Variable-Orifice Nozzle For Agricultural Pesticide Applications, Joe D. Luck, S. A. Shearer, M. P. Sama, Santosh Pitla

Department of Agricultural and Biological Systems Engineering: Faculty Publications

The goal of this research project was to further the development of an electromechanically controlled variable-orifice nozzle by creating an electronic control system and then evaluating that system based on step and ramp inputs. The control system was developed in a programming environment that combined an electronic data acquisition system and actuator with pressure and flow sensors. A proportional, variable-gain (based on system pressure) control system was developed to adjust nozzle flow rates to meet target application rates. The constraints were to achieve settling time of less than 1.0 s, overshoot of less than 10% of maximum flow (or minimum …

Safe Re-Entry Time With In-Cycle Shotcrete For Support Of Underground Excavations, Hla Aye Saw, Ernesto Villaescusa, Christopher Windsor

Shotcrete for Underground Support XII

No abstract provided.

Modeling Of Pollutant Adsorption On Novel Modified Biomass As A Means Of Seawater Decontamination, Dimitrios K. Sidiras, Fragiskos K. Batzias, Ioanna G. Siontorou, Ilias G. Konstantinou, Ioanna Salapa, Stavroula P. Zervopoulou

Biorefinery I: Chemicals and Materials From Thermo-Chemical Biomass Conversion and Related Processes

No abstract provided.

Quality Control For Wet-Mix Fiber Reinforced Shotcrete In Ground Support, Lihe (John) Zhang, Dudley R. Morgan

Shotcrete for Underground Support XII

No abstract provided.

Engineered Fiber Reinforced Shotcrete For Efficient And Fast Ground Support Installation, N. Ginouse, S. Reny, M. Jolin

Shotcrete for Underground Support XII

No abstract provided.

Evaluation Of Wet-Mix Shotcrete Containing Set-Accelerator And Service Life Prediction, Marc Jolin, F. Melo, B. Bissonnette, P. Power, E. Demmard

Shotcrete for Underground Support XII

No abstract provided.

Uncertainty Considerations In Calibration And Validation Of Hydrologic And Water Quality Models, J. Hernandez

Civil Engineering Faculty Publications and Presentations

Hydrologic and water quality models (HWQMs) are increasingly used to support decisions on various environmental issues and policy directions for present and future scenarios, at scales varying from watershed to continental levels. Uncertainty associated with such models may affect the ability of the models to accurately evaluate the response of complex systems, leading to misguided assessments and risk management decisions. Current well-known HWQMs contain numerous input parameters, many of which are not known with certainty, and in other cases model users can hardly recognize the genesis of uncertainty. Uncertainty in data, model structure, and model parameters can propagate throughout model …

Fabrication And Testing Of Low-Energy Calcium Sulfoaluminate-Belite Cements That Utilize Circulating Fluidized Bed Combustion By-Products, Robert Jewell, Robert Rathbone, Tristana Duvallet, Thomas Robl, Kamyar Mahboub

Coal Combustion and Gasification Products Journal Archive

The utilization of circulating fluidized bed combustion (CFBC) ash to make cement products that provide added value and offset CO2 production is the objective of this research. CFBC burns coal in the presence of a bed of slaked limestone, which effectively absorbs sulfur dioxide (SO2) to form anhydrite (CaSO4). CFBC produces two kinds of spent bed materials, coarse bottom ash and a much finer fly ash. Both of these products are very high in calcium. When properly conditioned, these materials are capable of acting as hydraulic cements, forming both calcium aluminosulfate minerals, most importantly ettringite, as well as calcium-alumina-silica gels, …

Prediction Of The Unburned Carbon Content Of Fly Ash In Coal-Fired Power Plants, Saeid R. Dindarloo, James C. Hower

Coal Combustion and Gasification Products Journal Archive

Prediction of carbon content in fly ash is a valuable index in both designing and optimizing coal-fired boilers. In this study, methods of multiple regression (MR), decision trees (DT), and support vector regression (SVR) were used for prediction of unburned carbon content of fly ash in a 300-MW power plant with a tangentially fired furnace using a low-NOx concentric firing system. Twenty-one boiler operational and coal petrological variables from 21 experiments in a previous benchmark study were used. A variables correlation matrix was used for feature (independent variables) selection in order to reduce the dimensions (number) of input variables from …

Recycling Of Lignite Coal Fly Ash By Its Conversion Into Zeolites, Silviya Boycheva, Denitza Zgureva, Annie Shoumkova

Coal Combustion and Gasification Products Journal Archive

The present study emphasized the conversion of fly ash from lignite coals into zeolites by a double-stage fusion-hydrothermal synthesis. The raw and the converted fly ashes were characterized with respect to their morphology, composition, and crystallinity. The effects of process parameters such as fusion temperature, concentration of the alkaline activator, and the duration of the hydrothermal incubation on the zeolitization process were studied. The experimental results indicate that the fusion temperature does not influence the process mechanism in the range 550–850uC, but it has an acceleration effect. The elevation of the sodium hydroxide/fly ash ratio from 1.6 to 2.0 enhances …

A Probabilistic Fracture Assessment Of Vertebral Cortical Bone, Tarun Goswami, Isaac Mabe

Biomedical, Industrial & Human Factors Engineering Faculty Publications

Cortical bone is a material with a porous structure. The presence of pores creates local stress concentrations and the likelihood of premature failure. Assuming that pores are present in all bone, vertebral endplates, for example, can subside. Subsidence has taken place at rates as high as 77 percent. A computational probabilistic assessment of the pore size distribution and their contribution to the fracture toughness has been presented in this paper. A Monte Carlo simulation was used to develop and assign random pores. Also the model compared crack sizes to the thickness of the cortical bone present as a limiting case. …

Finite Element Analysis Of System-Level Electronic Packages For Space Applications, Adrien Lambert, Ahsan Mian, Justin Hogan, Todd Kaiser, Brock Lameres

Mechanical and Materials Engineering Faculty Publications

Thermal analysis was required in order to aid in the design and testing of a radiation tolerant computing (RTC) system using a radiation sensor. During development of the system, different test beds were employed in order to characterize the radiation sensor and its supporting electronic systems. The most common preliminary tests are high altitude balloon tests which allow the sensor to experience cosmic radiation at high altitudes, consistent with space flight operations. In this study, finite element analysis (FEA) was used to evaluate primary system architecture, system support structures, and the flight payload in order to determine if the system …

A Computational Study Of A Photovoltaic Compound Parabolic Concentrator, William M. Vance

Browse all Theses and Dissertations

Routines have been written and added to the Wright State developed solar system simulation program called Solar_PVHFC to model incident solar radiation for a compound parabolic concentrator (CPC) that uses solar panels (photovoltaic panels) to produce electrical energy. Solar_PVHFC is a program that models a solar energy system composed of solar panels to produce electricity from the sun, hydrogen storage tanks to chemically store the energy produced by the solar panels, and fuel cells to convert between electrical and chemical energy when required. Solar_PVHFC features several adjustable parameters to model a solar panel, hydrogen storage, and fuel cell system. Now …

Direction Of Arrival Estimation Using Wideband Spectral Subspace Projection, Majid Shaik

Browse all Theses and Dissertations

Many areas such as Wireless Communication, Oil Mining, Radars, Sonar, and Seismic Exploration require the direction of arrival estimation (DOA) of wideband sources. Most existing wideband DOA estimation algorithms decompose the wideband signals into several narrowband frequency bins, followed by either focusing or transforming to a reference frequency bin, before estimating the DOAs. The focusing based methods are iterative and their performance is affected by the choice of preliminary DOA estimates and the number of source DOAs to be estimated. The existing method requiring transformation to a reference frequency bin exhibits spurious peaks in the spatial spectrum and is not …

Bio-Hydrocarbons Through Catalytic Pyrolysis Of Used Cooking Oils: Towards Sustainable Jet And Road Fuels, Marco Buffi, Andrea Maria Rizzo, David Chiaramonti

Biorefinery I: Chemicals and Materials From Thermo-Chemical Biomass Conversion and Related Processes

No abstract provided.

Upgraded Production Of A Hydroxylactone Anhydrosugar By Cellulose Pyrolysis And Its Application In The Synthesis Of Biologically Active Compounds, Ines Mancini, Andrea Defant, Federico Dosi', Danilo Malferrari, Daniele Fabbri

Biorefinery I: Chemicals and Materials From Thermo-Chemical Biomass Conversion and Related Processes

No abstract provided.

Biodiesel Synthesis From Domestic Used Cooking Oil In Southern Europe: Evaluation Of Fuel Quality, T.D. Tsoutsos, St. Tournaki, O. Paraiba, D. Antunes, F. Giglio, P. Quero Garcia, J. Braga, H. Adrianos, M. Filice

Biorefinery I: Chemicals and Materials From Thermo-Chemical Biomass Conversion and Related Processes

No abstract provided.

Transport Properties Of Wet-Mix Shotcrete, Lihe (John) Zhang, Dudley R. Morgan

Shotcrete for Underground Support XII

No abstract provided.

Early-Age Behavior Of Shotcrete Using Expansive Admixture, Kyong-Ku Yun, Kassa B. Abay, Kyeo-Re Lee, Seung-Yeon Han, Kyong Namkung

Shotcrete for Underground Support XII

No abstract provided.

The Effect Of Spraying On Fiber Content And Shotcrete Properties, Marc Jolin, J.-D. Lemay, N. Ginouse, B. Bissonnette, É. Blouin-Dallaire

Shotcrete for Underground Support XII

No abstract provided.

Comparison On Different Design Approaches Applied To A New Tunnel Lining System Reinforced By Tubular Arch, C.L. Zenti, R. Perlo

Shotcrete for Underground Support XII

No abstract provided.

New Technologies In Underground Projects: Drill Core Scanning, Documentation And Analysis, Jens Wiegand

Shotcrete for Underground Support XII

No abstract provided.