Engineering Commons^™

Deepak Ravindra, Margaret Von Steinen

International Alumni

Dr. Deepak Ravindra became a business owner at the same time he completed his Western Michigan University doctoral degree through a unique collaboration with a faculty researcher focused on developing methods to cut extremely hard and brittle materials.

Ala Al-Fuqaha, Margaret Von Steinen

International Faculty Researchers

A wide range of road safety and driver assistive applications— Intelligent Transport Systems—could result from a collaborative research project that Dr. Ala Al-Fuqaha, WMU professor of computer science, is working on with Dr. Elyes Hamida at the Qatar Mobility Innovation Center and Dr. Bharat Bhargava at Purdue University.

Development Of Anti-Fouling, Anti-Microbial Membranes By Chemical Patterning, Steven Weinman, Na Li, Viatcheslav Freger, Moshe Herzberg, Scott Husson

Chemical and Biomolecular Graduate Research Symposium

Over 1 billion people lack access to clean drinking water. Membranes are a tool that can help provide clean water to these people. However, treatment of impaired waters for beneficial use exposes the membranes to feed waters containing biological and abiotic species, which leads to fouling and loss of membrane productivity over time. Since reduction in flux due to fouling is one of the largest costs associated with membrane processes in water treatment, new coatings that limit fouling would have significant economic and societal impacts. Developing these advanced coatings is the focus of our work.

Carbon Fibers Derived From Bi-Component Precursors, Jing Jin, Amod A. Ogale

Chemical and Biomolecular Graduate Research Symposium

No abstract provided.

Conducting Polymer Microstructures And Composites For Supercapacitors, Kryssia P. Diaz-Orellana, Mark E. Roberts

Chemical and Biomolecular Graduate Research Symposium

To increase the performance of conducting polymer electrodes for supercapacitors by controlling polymer assembly, ion transport, electron transfer, and redox processes. The electrode morphology and electrochemical performance are studied.

Dendrimer-Guest Interactions: Challenging Conventional Wisdom, Ryan S. Defever, Sapna Sarupria

Chemical and Biomolecular Graduate Research Symposium

Solutions to many future challenges - including water purification, drug delivery, and energy storage - will require innovative new materials. Dendrimers are a class of materials with wide-ranging applications whose behavior is not fully understood. In many potential applications, dendrimers interact with small molecules. Our work focuses on describing the fundamental mechanisms governing the interactions between dendrimers and hydrocarbons using molecular modeling and computer simulations. A common view of dendrimer host-guest interactions is that the guest molecules are encapsulated in protected interior voids within the dendrimer structure. Our results present an alternative picture and show that the association of a …

Effect Of Process Variables On Mechanical And Transport Properties Of Carbon Fibers From Mesophase Pitch, Victor Bermudez, Amod Ogale

Chemical and Biomolecular Graduate Research Symposium

To obtain mesophase pitch-based carbon fibers with improved mechanical strength while retaining superior electrical and thermal properties by

i) Systematic investigation of the relationship between DDR versus longitudinal and transverse microstructure of mesophase MP fibers; and

ii) Developing a novel type of microstructure

Senior Design: Proposed Stem Academic Building, Middlesex Community College, Senior Design Class

Civil Engineering Student Work

2015 Civil Engineering Senior Design Project.

A proposal for a new STEM building to be constructed on the Middlesex Community College.

Completed by:

• Abdullah Al Bakri
• Ryan Benoit
• Brittany Brown
• Michael Buraczynski
• Samuel Colangelo
• Joseph Connolly
• Kyle Elmy
• Michael Fischer
• Victor Goitia Jurado
• Michael Hanley
• Andrew Malian
• Michael Mathews
• Dionys Quezada
• Katie Rougeot
• Jacob Santos
• Isadora Sartor
• Vega Yerko

56th Conference On Senior Engineering Design, College Of Engineering And Applied Sciences

Senior Engineering Design Conference

The 56th Conference on Senior Engineering Design Projects was held on April 21, 2015 at the College of Engineering and applied Sciences on the Parkview Campus of Western Michigan University. The college sponsors the conference to showcase the work of its graduating seniors, who are required to complete a capstone project that puts into practice what they have learned. Many of the projects are sponsored by business and industry.

Environmental Systems Engineering - Swarthmore College, Swarthmore, Arthur Mcgarity

All ECSTATIC Materials

Course in environmental systems engineering offered at Swarthmore College, Swarthmore in Spring 2015.

Analysis Of Rainfall Time-Series, Stefano Galelli

All ECSTATIC Materials

No abstract provided.

Modelling Rainfall-Runoff Processes (Empirical Models), Stefano Galelli

All ECSTATIC Materials

No abstract provided.

A Systematic Review Of The Critical Factors For Success Of Mobile Learning In Higher Education (University Students' Perspective), Muasaad Alrasheedi, Luiz Fernando Capretz, Arif Raza

Electrical and Computer Engineering Publications

The phenomenon of the use of a mobile learning (m-Learning) platform in educational institutions is slowly gaining momentum. However, the enthusiasm with which mobile phones have been welcomed into every aspect of our lives is not yet apparent in the educational sector. To understand the reason, it is important to understand user expectations of the system. This article documents a systematic review of existing studies to find the success factors for effective m-Learning. Our systematic review collates results from 30 studies conducted in 17 countries, where 13 critical success factors were found to strongly impact m-Learning implementation. Using these results …

Consolidation-Induced Solute Transport For Constant Rate Of Strain. I: Model Development And Simulation Results, Hefu Pu, Patrick J. Fox

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

A numerical model, called CSTCRS1, is presented for coupled one-dimensional consolidation and solute transport under constant rate of strain (CRS) loading conditions. The consolidation algorithm accounts for vertical strain, general constitutive relationships, relative fluid velocity, changing compressibility and hydraulic conductivity during consolidation, and an external hydraulic gradient. The solute transport algorithm accounts for advection, dispersion, linear and nonlinear sorption, and equilibrium and nonequilibrium sorption. Soil compressibility is rate-independent and as such CSTCRS1 is more appropriate for less-structured soils. The model is based on a dual-Lagrangian framework that separately tracks the motions of sold and fluid phases. The development of CSTCRS1 …

Heterogeneous Catalysis Of Aqueous Phase Reforming Of Glycerol With First Principle Calculations And Molecular Dynamics Simulations, Tianjun Xie, Rachel B. Getman

Chemical and Biomolecular Graduate Research Symposium

No abstract provided.

Sediment Transport Modelling On The River Bandon, John Gamble, D. Barnett, Joseph R. Harrington

Conference Papers

Presented at Environ 2015 The River Bandon catchment area is 6ookm^ with a river length of 72km. The River Bandon has protected species within its waters, e.g., Salmon and Freshwater Pearl Mussel. The upstream portion of the catchment above Dunmanway is an SAC The river is characterised by suspended and bed load transport.

Should Nuclear Energy Be More Heavily Incorporated By The United States?, Matthew Romer

Nebraska College Preparatory Academy: Senior Capstone Projects

America is involved in one of the biggest races towards electrical efficiency, cleanliness, and productivity. Nuclear energy is a major part of the U.S.’s non-­‐carbon emitting electricity, and has strict regulations for management. However, this form of energy has been on the decline in the past couple decades due to cost and competition with cheaper, less clean methods. Is nuclear energy feasible enough to continue?

Bayesian Global Optimization Approach To The Oil Well Placement Problem With Quantified Uncertainties, Zengyi Dou

Open Access Theses

The oil well placement problem is vital part of secondary oil production. Since the calculation of the net present value (NPV) of an investment depends on the solution of expensive partial differential equations that require tremendous computational resources, traditional methods are doomed to fail. The problem becomes exceedingly more difficult when we take into account the uncertainties in the oil price as well as in the ground permeability. In this study, we formulate the oil well placement problem as a global optimization problem that depends on the output of a finite volume solver for the two-phase immiscible flow (water-oil). Then, …

The Effect Of Maximum Aggregate Size On The Shear Strength Of Geometrically Scaled Reinforced Concrete Beams, Derek Robert Daluga

Open Access Theses

Shear strength of reinforced concrete beams without web reinforcement has been reported to decrease with increases in depth. This is often referred to as a size effect. This reduction in shear strength has been reported to decrease with the use of web reinforcement and increases in maximum aggregate size. ^ The purpose of this study was to test two hypotheses 1) shear strength increases with increases in maximum aggregate size and 2) aggregate gradation affects this increase in shear strength. Maximum aggregate size is defined here as the size of the smallest sieve opening through which all aggregate particles pass. …

Climate Change Impact Assessments Using The Water Erosion Prediction Project Model, Joseph Trotochaud

Open Access Theses

This study was conducted to develop a simplified method of obtaining future climate data inputs for natural resource models and apply that method to three locations within the continental United States to assess the effect of climate change on soil erosion, runoff, and fire risk. A method was developed for quickly obtaining future climate data over a wide range of scenarios, General Circulation Models (GCMs), and timescales from the Intergovernmental Panel on Climate Change (IPCC) Fourth Assessment Report (AR4) and Fifth Assessment Report (AR5) model families using the MarkSim^® DSSAT Weather Generator and a Microsoft Excel VBA Macro, the …

Overcoming Fundamental Barriers In Photovoltaic And Terahertz Generation, Chao Zhou

Open Access Theses

Several fundamental barriers limit the performance of opto-electronic conversion processes below 100%. Two specific examples of current technological interest include photovoltaic conversion of sunlight into electricity (i.e., solar cells), and terahertz generation from optical sources. In particular, solar cells are limited not only by the Carnot limit associated with the second law (approximately 86% at room temperature), but also by radiative recombination, non-reciprocity, carrier thermalization, and sub-bandgap losses. In the case of terahertz generation, the typical process of difference frequency generation relies on two input optical waves with only a small difference between them to generate the desired output; however, …

Comparison Of Sutures And Devices Used In Closure Following Partial Nephrectomy Suturing, Bikal Paka

Masters Theses

Laparoscopic partial nephrectomy (LPN) is an effective surgical procedure to remove a small renal tumor, while preserving the remainder of the kidney. However, it is a technically challenging procedure to maintain hemostatic condition on the kidney during LPN suturing. Three different experiments were conducted to explore the characteristics and limitations of the current mechanism for tissue approximation during LPN procedures.

During the first experiment, a standard suture anchor Hem-o-lok device, a standard stop knot, and three prototype devices were compared to each other based on the amount of tension that could be placed on a suture before there was a …

Model Reduction: Why It Is Possible And How It Can Potentially Help To Control Swarms Of Unmanned Arial Vehicles (Uavs), Martine Ceberio, Leobardo Valera, Olga Kosheleva, Rodrigo A. Romero

Departmental Technical Reports (CS)

In many application areas, such as meteorology, traffic control, etc., it is desirable to employ swarms of Unmanned Arial Vehicles (UAVs) to provide us with a good picture of the changing situation and thus, to help us make better predictions (and make better decisions based on these predictions). To avoid duplication, interference, and collisions, UAVs must coordinate their trajectories. As a result, the optimal control of each of these UAVs should depend on the positions and velocities of all others -- which makes the corresponding control problem very complicated. Since, in contrast to controlling a single UAV, the resulting problem …

Optimizing Cloud Use Under Interval Uncertainty, Vladik Kreinovich, Esthela Gallardo

Departmental Technical Reports (CS)

One of the main advantages of cloud computing is that it helps the users to save money: instead of buying a lot of computers to cover all their computations, the user can rent the computation time on the cloud to cover the rare peak spikes of computer need. From this viewpoint, it is important to find the optimal division between in-house and in-the-cloud computations. In this paper, we solve this optimization problem, both in the idealized case when we know the complete information about the costs and the user's need, and in a more realistic situation, when we only know …

Synthesis And Characterization Of A Lubricin Mimic (Mlub) To Reduce Friction On The Articular Cartilage Surface, Alexandra May Lawrence

Open Access Theses

The lubricating proteoglycan, lubricin, facilitates the remarkable low friction and wear properties of articular cartilage in the synovial joints of the body. Lubricin lines the joint surfaces and plays a protective role as a boundary lubricant in sliding contact; down-regulation of lubricin is associated with cartilage degradation and the pathogenesis of osteoarthritis. An unmet need for early osteoarthritis treatment is the development of therapeutic molecules that mimic lubricin function and yet are also resistant to enzymatic degradation common in the damaged joint. Here, we engineered a lubricin mimic (mLub) that resists enzymatic degradation and binds to the articular surface to …

Optimizing Electrode Thickness And Material For Laser-Induced Electrothermal Flow, Jian Wei Khor

Open Access Theses

In this article, the material dependence of electrothermal flow is studied to optimize an optoelectric particle manipulation technique called Rapid Electrokinetic Patterning (REP). REP utilizes a heat source to produce temperature gradients, which, in this study, are induced by the application of a 1064 nm cw laser. The simultaneous application of an uniform AC electric field assemble colloids on the surface of an electrode that can be moved by translating the laser. The temperature gradients produced from the heat source are crucial in REP as the higher the temperature gradient the faster the electrothermal flow. Thus, optimization of temperature gradients …

Smart V-Belt, Kyle J. Mosier

Open Access Theses

The purpose of this research was to develop a method for detecting premature failure in a v-belt using capacitance and resistance readings. Another goal of the research was to detect tension values on the belt using the same readings. Materials of current belts and possible materials for a prototype belt were tested. Materials were chosen, and prototype belts were built. Pulley system configurations were developed and built. Sections of the belt designs were tested for capacitance and resistance before and after various methods of damage. Capacitance was chosen as the better sensing method. Certain layered belt configurations and sheave configurations …

Delamination Of C/Pekk I-Beam Using Virtual Crack Closure Technique And Cohesive Zone Method, Greeshma Ramakrishna

Open Access Theses

A damage study is conducted on a carbon epoxy/PEKK (poly-ether-ketone-ketone) thermoplastic composite I-Beam, with a pre crack of 100 mm modeled between the top flange and the filler (butt joint between filler and web). This project is in collaboration with Fokker Aerostructures, Netherlands and is part of the Thermoplastic Primary Aircraft Structure innovation program (TAPAS). The C/PEKK I-Beam is modeled after a section of the Gulfstream G650 aircraft's centre beam, which was previously a carbon fiber/epoxy hat-stiffened skin construction. The objective of the thesis is to identify if the crack propagates in the I-Beam within the load range that act …

Thermodynamics And Kinetics Of Dna Nanotube Polymerization From Single-Filament Measurements, Rizal F. Hariadi, Bernard Yurke, Erik Winfree

Electrical and Computer Engineering Faculty Publications and Presentations

DNA nanotubes provide a programmable architecture for molecular self-assembly and can serve as model systems for one-dimensional biomolecular assemblies. While a variety of DNA nanotubes have been synthesized and employed as models for natural biopolymers, an extensive investigation of DNA nanotube kinetics and thermodynamics has been lacking. Using total internal reflection microscopy, DNA nanotube polymerization was monitored in real time at the single filament level over a wide range of free monomer concentrations and temperatures. The measured polymerization rates were subjected to a global nonlinear fit based on polymerization theory in order to simultaneously extract kinetic and thermodynamic parameters. For …

Design Considerations For Traveling-Wave Modulator-Based Cmos Photonic Transmitters, Kehan Zhu, Vishal Saxena, Xinyu Wu, Wan Kuang

Electrical and Computer Engineering Faculty Publications and Presentations

Systematic design and simulation methodology for hybrid optical transmitters that combine CMOS circuits in a 130 nm process, and a traveling-wave Mach-Zehnder modulator (TWMZM) in 130 nm SOI CMOS process, is presented. A compact Verilog-A model for the TWMZM is adopted for the electrooptical simulation. A bond wire model using a high-frequency solver is included for accurate package simulation. Transmitter post-layout simulation result exhibits 5.48 dB extinction ratio, 9.6 ps peak-to-peak jitter, and the best power efficiency of 5.81 pJ/bit when operating up to 12.5 Gb/s non-return-to-zero data. A pulse amplitude modulation 4-level transmitter with detailed linearity design procedure is …