Engineering Commons^™

High Temperature Cmos Silicon Carbide Asynchronous Circuit Design, Landon John Caley

Graduate Theses and Dissertations

Designing a digital circuit to operate in an extreme temperature range is a challenge with increasing demand for a solution. Large variations in temperature have a distinct impact on electron mobilities causing substantial changes to the threshold voltage of the devices. These physical changes affect the setup and hold times of clocked components, such as D-Flip Flops, of a traditional synchronous digital circuit. Focusing primarily on high temperature circuit operation, this dissertation presents a digital circuit design methodology pairing an asynchronous circuit design paradigm called NULL Convention Logic (NCL) as well as traditional Boolean circuitry with a wide-bandgap semiconductor material, …

The Production Of Biobutanol From Biomass Via A Hybrid Biological/Chemical Process, Thomas Melvin Potts

Graduate Theses and Dissertations

Biobutanol use as a fuel began in the late 19th century. Problems remain in economic viability. A review of the state of the art and need for technical advances is presented.

The technical potential of producing biofuel from a naturally occurring macroalgae was studied. The algae grow in Jamaica Bay, New York City, in contaminated water. The process consisted of mechanical harvesting, drying, grinding, and acid hydrolysis to form an algal sugar solution. Clostridium beijerinckii and C. saccharoperbutylacetonicum were used in an acetone butanol ethanol (ABE) fermentation to make butanol. Fermentation was followed by distillation Butanol concentrations during fermentation reached …

Environmental Reliability Of Thin Film Sealing On Thick Film Ltcc, Charles R. Bourland

Graduate Theses and Dissertations

As electronic components and systems become more intricate and expand into new realms of use case scenarios, new materials systems must be explored. With new systems comes the balancing acts of cost and reliability. Presented here is a thesis that explores a new hybrid-electronics packaging system using low temperature co-fired ceramics, referred to as LTCC. An LTCC system was designed to explore the environmental reliability of numerous thick film LTCC features and parameters. A key element was to explore how a thin film metallization stack up used to cap or seal underlying thick film structures would decrease environmental susceptibility while …

Selective Body Biasing For Post-Silicon Tuning Of Sub-Threshold Designs: An Adaptive Filtering Approach, Hui Geng, Jianming Liu, Pei Wen Luo, Liang Chia Cheng, Steven L. Grant

Electrical and Computer Engineering Faculty Research & Creative Works

A sub-threshold design could provide a compelling approach to power critical applications. An exponential relationship exists, however, between the delay and the threshold voltage, that makes this design-time timing closure extremely difficult, if not impossible, to achieve. Several previous studies were focused on the technique of body biasing during post-silicon tuning for delay compensation. But they were mostly for super-threshold designs where spatially correlated L eff variation dominates. They cannot be applied directly to sub-threshold designs in which purely random threshold voltage variations dominate. These works also assumed multiple body biasing voltage domains and multiple body biasing voltage levels, which …

Enhancement Of The Performance Of Gaas Based Solar Cells By Using Plasmonic, Anti-Reflection Coating And Hydrophobic Effects, Yahia Fayiz Makableh

Graduate Theses and Dissertations

Investigation of renewable energy resources is gaining huge momentum in recent years due to the limited fossil fuels, and their detriment impact on the environment. Solar energy is promising to meet the increased energy demand. In order to achieve this goal, solar energy has to be harvested efficiently at low cost. Therefore, higher efficiency solar cells are the primary focus of research worldwide. Photovoltaics based on InAs/GaAs intermediate band solar cells and their device performance enhancements are investigated in this dissertation. The device enhancement is carried out by surface modification methods. The dissertation work is inspired by the need of …

Wavelength-Selective Switch With Direct Few Mode Fiber Integration, D. M. Marom, J. Dunayevsky, D. Sinefeld, M. Blau, Roland Ryf, Nicolas K. Fontaine, M. Montoliu, S. Randel, C. Liu, B. Ercan, Mina Esmaeelpour, For Full List Of Authors, See Publisher's Website.

Electrical and Computer Engineering Faculty Research & Creative Works

The first realization of a wavelength-selective switch (WSS) with direct integration of few mode fibers (FMF) is fully described. The freespace optics FMF-WSS dynamically steers spectral information-bearing beams containing three spatial modes from an input port to one of nine output ports using a phase spatial light modulator. Sources of mode dependent losses (MDL) are identified, analytically analyzed and experimentally confirmed on account of different modal sensitivities to fiber coupling in imperfect imaging and at spectral channel edges due to mode clipping. These performance impacting effects can be reduced by adhering to provided design guidelines, which scale in support of …

Sensitivity Analysis Of Stress State And Bond Strength Of Fiber-Reinforced Polymer/Concrete Interface To Boundary Conditions In Single Shear Pull-Out Test, Tayyebeh Mohammadi, Baolin Wan

Civil and Environmental Engineering Faculty Research and Publications

The bond between fiber-reinforced polymer and concrete substrate plays a key role in the performance of concrete structures after strengthened by externally bonded fiber-reinforced polymer composite materials. The single shear pull-out test is generally used to determine the interface characteristics, and various bond–slip models have been proposed based on the results of this test. However, the sensitivity of the bond strength to the boundary conditions has not yet been considered in the available models in the literatures. This article presents an experimental and numerical study targeted at understanding the influence of the boundary conditions on the bond strength of the …

Modeling New Product Success From Component Measures Of Product Advantage: A Model Utilizing Automated Text Classification And Sentiment Analysis, Ashley Nolen Akerman

Dissertations

What attributes of products are most associated with product success from the perspective of the consumer and how is this association affected by the technology level of the product offering? Creating successful new products is an imperative for long term survival for businesses. Past research has focused on the perspectives of manufacturers to understand product attributes that comprise the construct described as product advantage. This study investigated the components of product advantage from the perspective of the consumer and the significance of each component in explaining variance in product success.

A methodology and two classification toolsets were developed for the …

Design, Programming, And User-Experience, Kaila G. Manca

Honors Scholar Theses

This thesis is a culmination of my individualized major in Human-Computer Interaction. As such, it showcases my knowledge of design, computer engineering, user-experience research, and puts into practice my background in psychology, com- munications, and neuroscience.

I provided full-service design and development for a web application to be used by the Digital Media and Design Department and their students.This process involved several iterations of user-experience research, testing, concepting, branding and strategy, ideation, and design. It lead to two products.

The first product is full-scale development and optimization of the web appli- cation.The web application adheres to best practices. It was …

Quantum Mechanical Modeling Of Organic-Oxide Surface Complexation Reactions, Brianna Datti

Honors Scholar Theses

Recent advancements in agriculture, industry, and pharmaceutical formulations have increased the presence of organic contaminants in the environment. It is important and necessary to study and understand the processes which control the environmental fate and transformation of contaminants and improve removal and remediation techniques. The use of advanced quantum mechanical modeling is a promising technique to better understand the mechanisms of adsorption within the environment. Relative Gibbs free energy values of adsorption have been calculated using such modeling for selected organic acids sorption to iron oxides, revealing the thermodynamic favorability of each of the reactions, except one involving bidentate mononuclear …

Design Of A Simple Device For Accurate Measurement Of Human Blood Viscosity In Oxygenated And Deoxygenated Conditions, Catherine E. Oliver, Jessica Hockla, Divya Kamireddi

Honors Scholar Theses

The purpose of this research is to design, fabricate, and test a simple device that can accurately measure the viscosity of whole blood in both an oxygenated and a deoxygenated environment. The ideal device is easy to operate, inexpensive to fabricate, and is usable outside of a laboratory setting. The microfluidic rheometer presented here was fabricated using a wet chemical etching method. Using the channel dimensions, the known viscosity of a reference fluid, and the velocity of fluid flow of the sample and a reference fluid through the microchannels the unknown viscosity of a sample fluid is calculated.

Assessment Of Bore-Cone Taper Junctions In Explanted Modular Total Hip Replacements, Christine Margaret Stamer

All Theses

For people with chronic hip pain due to arthritis or other conditions, a total hip replacement (THR) is a common procedure used to eliminate the pain. Due to the natural variation in patient anatomy, THR prostheses are becoming increasingly more modular to allow for a more customized initial replacement and for an easier revision if needed in the future. Currently, THR prostheses routinely have modular femoral heads to provide surgeons with intraoperative flexibility. This modularity allows the surgeons to maintain the proper leg length and restore hip biomechanics for the patient and insert the components more easily and precisely. Modular …

Engineering Hospital Discharge Instructions: An Eye-Tracking Based Study, Haley Marie Vaigneur

All Theses

With new healthcare reform initiatives, (e.g., the Patient Protection and Affordable Care Act) hospitals have additional requirements to reduce avoidable readmissions. This results in identifying the needs for improving the hospital discharge process, improving care transitions and discharge instructions, and increasing overall patient health literacy. In terms of discharge instructions, one of the most influential factors to patients' understanding and compliance with their prescribed health regimen is the document's readability. The study goal is to examine how adjusting the discharge instructions' reading level and using human factors design guidelines can influence a novice user's ability to read, comprehend, and recall …

Electrocatalyst Decorated Hematite Nanowire Arrays For Photoelectrochemical Water Splitting., Erica James

College of Arts & Sciences Senior Theses

Solar power is a leading option for renewable energy. However, storing solar energy is one of the leading pitfalls in this field, and one viable option is to store solar energy in chemical bonds, for example in H2 via water splitting. Hematite, α-Fe2O3, is one of the possible semiconductors that has been researched to drive photoelectrolysis of water. Hematite alone is not a decent material for photoelectrolysis because of the large activation energy required to begin the reaction. To make hematite more useful for photoelectrolysis an electrocatalyst, such as nickel oxide, is needed. In this experiment, nickel (II) nitrate was …

Development And Verification Of Multi-Level Sub-Meshing Techniques Of Peec To Model High-Speed Power And Ground Plane-Pairs Of Pfbs, Leihao Wei

Graduate Theses - Electrical and Computer Engineering

No abstract provided.

The Effect Of Noise On The Response Of A Vertical Cantilever Beam Energy Harvester, Michael I. Friswell, Onur Bilgen, S. Faruque Ali, Grzegorz Litak, Sondipon Adhikari

Mechanical & Aerospace Engineering Faculty Publications

An energy harvesting concept has been proposed comprising a piezoelectric patch on a vertical cantilever beam with a tip mass. The cantilever beam is excited in the transverse direction at its base. This device is highly nonlinear with two potential wells for large tip masses, when the beam is buckled. For the pre-buckled case considered here, the stiffness is low and hence the displacement response is large, leading to multiple solutions to harmonic excitation that are exploited in the harvesting device. To maximise the energy harvested in systems with multiple solutions the higher amplitude response should be preferred. This paper …

Multimodal Content Delivery For Geo-Services, Keith Gardiner

Doctoral

This thesis describes a body of work carried out over several research projects in the area of multimodal interaction for location-based services. Research in this area has progressed from using simulated mobile environments to demonstrate the visual modality, to the ubiquitous delivery of rich media using multimodal interfaces (geo- services). To effectively deliver these services, research focused on innovative solutions to real-world problems in a number of disciplines including geo-location, mobile spatial interaction, location-based services, rich media interfaces and auditory user interfaces. My original contributions to knowledge are made in the areas of multimodal interaction underpinned by advances in geo-location …

Scalable Control Architecture For Variable-Rate Turn Compensation, Michael P. Sama, Joe D. Luck, Timothy S. Stombaugh

Biosystems and Agricultural Engineering Faculty Publications

The objective of this study was to determine if a CAN bus could be used to implement variable-rate turn compensation in a manner that is scalable by encoding application rates for an entire implement into a single data message. A variable-rate turn compensation test fixture was developed that used a CAN bus to communicate application rates to 16 individual nodes using a 2-byte data message (80-bit extended identifier CAN messages). The system assumed that the physical structure of an implement was linear and that the control nodes were equally spaced. Application rates for the outer-most nodes were broadcasted and the …

A Framework For Estimating Labor Productivity Frontiers, Nirajan Mani

Department of Construction Engineering and Management: Dissertations, Theses, and Student Research

The efficiency of construction operations is typically determined by comparing actual versus historical productivity. This practice is accurate if historical data reflects optimal values. Otherwise, this comparison is a gauge of relative rather than absolute efficiency. Therefore, in order to determine absolute efficiency, one must compare actual versus optimal productivity. Optimal productivity is the highest sustainable productivity level achievable under “good management” and “typical field conditions,” while the productivity frontier is the theoretical maximum achievable under “perfect conditions.”

The productivity frontier is an abstraction useful in the estimation of optimal productivity of construction operations. This research contributes to the body …

Assessing Gait And Postural Stability Of Construction Workers Using Wearable Wireless Sensor Networks, Houtan Jebelli

Department of Construction Engineering and Management: Dissertations, Theses, and Student Research

Falling accidents are a leading cause of fatal and nonfatal injuries in the construction industry. This fact demonstrates the need for a comprehensive fall-risk analysis that incorporates the effects of construction workers’ physiological characteristics. In this context, the objective of the thesis is to investigate and validate the usefulness of the gait- and postural-stability metrics in assessing construction workers’ fall risks. Diverse metrics that assess the capability to keep the body balanced and maintain coordination of body segments during locomotion (gait stability) and stationary postures (postural stability) have been introduced and used in clinical applications. However, their usefulness in the …

A Study On The Be2100 Noninvasive Biomass Sensor As An Instrument For Measuring Optical Density During Fed-Batch Fermentation At Various Stir Rates, Hannah Moreland

Biological and Agricultural Engineering Undergraduate Honors Theses

Fusion proteins, engineered proteins that combine the DNA sequences and therefore properties of two different proteins, can be used in a variety of therapeutic purposes. One example of a therapeutic fusion protein is collagen binding domain-parathyroid hormone glutathione-S-transferase (CBD-PTH-GST), which can combat osteoporosis by binding specifically to collagen in the vertebral column and promoting bone growth through the release of calcium. This fusion protein is being expressed with Escherichia coli at the University of Arkansas through fed-batch fermentation, a method that produces large volume of cells through fermentation in a controlled environment in a bioreactor. It is necessary to track …

The Investigation Of Chitosan-Based Hydrogels For Intratumoral Delivery Of Immunotherapeutic Cytokines, Ethan Drew Lowry

Biomedical Engineering Undergraduate Honors Theses

Controlled and localized delivery of Interleukin 12 (IL-12) is critical to effective and non-toxic cancer immunotherapy. Current delivery protocols for pre-clinical anti-tumor trials utilize solutions of chitosan, a mucoadhesive and bioeliminable biopolymer, to slow the release of IL- 12 into the tumor microenvironment. In order to further increase IL-12 retention, we have developed and characterized two chitosan-based in situ gelling hydrogels for IL-12 immunotherapy. One hydrogel, composed of heparin and chitosan, is herein described from initial conception through multiple stages of characterization including isolation of a range of suitable hydrogel formulations and observational physical and chemical properties. A second hydrogel …

Fluorescent Imaging On A Microfluidics Chip For Quantification Of Leukocyte Count, Aneeka Majid

Biomedical Engineering Undergraduate Honors Theses

We have demonstrated a method for conducting a leukocyte count in whole blood using a microfluidics chip and epi-fluorescence setup. Leukocyte counts provide physicians with a wealth of information about a patient’s medical condition and as such are routinely completed for many hospital visits. Miniaturization of this diagnostic tool may enable physicians to provide healthcare in resource-limited settings, where patients would otherwise not receive this test. The microfluidics chip was fabricated in polydimethylsiloxane (PDMS) using soft-film lithography. Following further processing and cleaning, the PDMS mold is exposed to UV-ozone for surface activation, and then sealed with a glass coverslip to …

Development Of An In Vitro Myogenesis Assay, Anna Arnaud

Biomedical Engineering Undergraduate Honors Theses

The objective of this study was to explore the interaction between mouse C2C12 cells and the extracellular matrix, particularly the process of myoblasts converting to myocytes. This study aimed to create a myogenesis assay that presents a process to effectively monitor the development of mouse C2C12 myoblasts into differentiated skeletal myotubes through detection of the protein MyoD. Myogenesis, the development of muscle tissue, occurs when muscle progenitor cells, myoblasts, fuse to form multinucleated myotubes, followed by cell fusion and resulting in a myofiber capable of contraction. An in vitro myogenesis assay would enable further research to efficiently test the effect …

Multiplexed Microfluidic Loop-Mediated Isothermal Amplification Of The 16s Rrna Gene For The Diagnosis Of Neonatal Sepsis In Resource-Limited Environments, Griffin Thomas Sonaty

Biomedical Engineering Undergraduate Honors Theses

Bacterial infection, or sepsis, places a disproportionately high burden on newborns in developing countries. This is due in part to a lack of diagnostic tools suitable for sustainable use in resource-limited nurseries. One potential vehicle for a new diagnostic assay is loop-mediated isothermal amplification (LAMP), a high-yield DNA amplification method. LAMP has been used to detect single genes from bacteria in blood serum samples to aid in sepsis diagnosis. While specific, this approach can only provide detection for one species at a time. LAMP could be adapted to detect a broader set of bacteria, while retaining a degree of specificity …

Intracellular Uptake Of Chitosan Nanoparticle-Based Vaccines, Katherine E. Wilson

Biomedical Engineering Undergraduate Honors Theses

Particle-based delivery systems are a promising approach to enhance antigen-specific immunity for use in vaccines. Chitosan, a natural polysaccharide derived from the exoskeletons of crustaceans, shows great potential as a vaccine carrier due to its favorable properties as a biomaterial, including biocompatibility and biodegradability. In this study, the intracellular uptake of chitosan nanoparticles is explored and compared to that of other commonly used particle-based delivery vehicles, such as poly (lactic-co-glycolic acid) (PLGA). Fluorescein isothiocyanate-labeled bovine serum albumin (FITC-BSA) was used as a model protein antigen and encapsulated in both chitosan particles via precipitation-coacervation and PLGA particles via double emulsion solvent …

Cal Poly Electrical Distribution Coordination And Short Circuit Analysis, Alexander Gomez, Kaylynn Rothleder

Electrical Engineering

The purpose of this project is to maintain the California Polytechnic State University Electrical Distribution System by performing short circuit and protective device coordination studies for the Baker Science Building. When a short circuit arises in a system, there is no finite way in telling what protective device will be tripped, which can cause outages, arc flashes and electrical explosions. The best way in determining the outcomes of these occurrences are to perform precise simulated reports. To output these reports, design and analysis of the single line through a commercialized software, Power Tools for Windows (SKM) was used. To name …

Development Of A Tridimensional Measuring Application For Ipads, Michael Casebolt, Nicolas Kouatli, Jack Mullen

Computer Science and Software Engineering

In today’s fast-paced distribution centers workers and management alike are constantly searching for the quickest and most efficient way to package items for distribution. Even with the advancement of app-oriented solutions to a variety of problems across many industries there is a distinct unmet need in distribution environments for an application capable of increasing the efficiency and accuracy of packaging items. This senior project focused on the development and testing of an application utilizing the Structure Three Dimensional Sensor and a 4th generation iPad to scan an object or group of objects to be packaged and determine the overall dimensions …

Design Of Reliable And Sustainable Wireless Sensor Networks: Challenges, Protocols And Case Studies, Fan Yang

All Dissertations

Integrated with the function of sensing, processing, and wireless communication, wireless sensors are attracting strong interest for a variety of monitoring and control applications. Wireless sensor networks (WSNs) have been deployed for industrial and remote monitoring purposes. As energy shortage is a worldwide problem, more attention has been placed on incorporating energy harvesting devices in WSNs. The main objective of this research is to systematically study the design principles and technical approaches to address three key challenges in designing reliable and sustainable WSNs; namely, communication reliability, operation with extremely low and dynamic power sources, and multi-tier network architecture. Mathematical throughput …

A Laboratory Scale Assessment Of The Effect Of Chlorine Dioxide Pre-Oxidation On Disinfection By-Product Formation For Two Surface Water Supplies, Angela Rodriguez

HIM 1990-2015

Chemical disinfection is the cornerstone of safe drinking water. However, the use of chemical disinfection results in the unintentional formation of disinfection by-products (DBPs), an outcome of reactions between the disinfectant and natural organic matter (NOM) present in the native (raw) water. DBPs are suspected carcinogens, and as such, have been regulated by the U.S. Environmental Protection Agency (USEPA) under the Safe Drinking Water Act (SDWA). This document reports the results of a study that investigated the use of chlorine dioxide pre-oxidation for the reduction of DBP precursors, and subsequently, DBP formation potential (FP). To determine the effectiveness of the …